ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 158 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
deleted file mode 100644
index de24db4d4b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * jjPlus JWAP230 board support
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JWAP230_GPIO_LED_LED1		23
-#define JWAP230_GPIO_LED_LED2		22
-#define JWAP230_GPIO_LED_LED3		21
-
-#define JWAP230_MAC0_OFFSET		0x0
-#define JWAP230_MAC1_OFFSET		0x6
-#define JWAP230_WMAC_CALDATA_OFFSET	0x1000
-
-static struct gpio_led jwap230_leds_gpio[] __initdata = {
-	{
-		.name		= "jwap230:green:led1",
-		.gpio		= JWAP230_GPIO_LED_LED1,
-		.active_low	= 1,
-	},
-	{
-		.name		= "jwap230:green:led2",
-		.gpio		= JWAP230_GPIO_LED_LED2,
-		.active_low	= 1,
-	},
-	{
-		.name		= "jwap230:green:led3",
-		.gpio		= JWAP230_GPIO_LED_LED3,
-		.active_low	= 1,
-	}
-};
-
-static const struct ar8327_led_info jwap230_leds_qca8337[] = {
-	AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
-	AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
-};
-
-/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
-static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
-	.led_ctrl0 = 0xcf37cf37,
-	.led_ctrl1 = 0xcf37cf37,
-	.led_ctrl2 = 0xcf37cf37,
-	.led_ctrl3 = 0x0,
-	.open_drain = true,
-};
-
-/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
-static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
-	.mode = AR8327_PAD_MAC_RGMII,
-	.txclk_delay_en = true,
-	.rxclk_delay_en = true,
-	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-	.mac06_exchange_dis = true,
-};
-
-/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
-static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
-	.mode = AR8327_PAD_MAC_SGMII,
-	.sgmii_delay_en = true,
-	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_platform_data jwap230_qca8337_data = {
-	.pad0_cfg = &jwap230_qca8337_pad0_cfg,
-	.pad6_cfg = &jwap230_qca8337_pad6_cfg,
-	.port0_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-	.port6_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-	.led_cfg = &jwap230_qca8337_led_cfg,
-	.num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
-	.leds = jwap230_leds_qca8337,
-};
-
-static struct mdio_board_info jwap230_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = 0,
-		.platform_data = &jwap230_qca8337_data,
-	},
-};
-
-static void __init jwap230_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
-				 jwap230_leds_gpio);
-
-	mdiobus_register_board_info(jwap230_mdio0_info,
-				    ARRAY_SIZE(jwap230_mdio0_info));
-	ath79_register_mdio(0, 0x0);
-
-	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
-	/* QCA9558 GMAC0 is connected to RMGII interface */
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = BIT(0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
-	ath79_register_eth(0);
-
-	/* QCA9558 GMAC1 is connected to SGMII interface */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-	ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
-	ath79_register_eth(1);
-
-	ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
-
-	ath79_register_pci();
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);