ar71xx: add kernel support for D-Link DIR-869 A1

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

1 files changed, 178 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c
new file mode 100644
index 0000000000..5847423891
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c
@@ -0,0 +1,178 @@
+/*
+ *  D-Link DIR-869 A1 support
+ *
+ *  Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ *  Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
+ *
+ *  Derived from: mach-ubnt-unifiac.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+
+#define DIR869A1_GPIO_BTN_RESET		1
+#define DIR869A1_GPIO_BTN_WPS		2
+#define DIR869A1_GPIO_SWITCH_MODE	8
+
+#define DIR869A1_GPIO_ENABLE_SWITCH	11
+
+#define DIR869A1_GPIO_LED_POWER		15
+#define DIR869A1_GPIO_LED_ORANGE	16
+
+#define DIR869A1_KEYS_POLL_INTERVAL	20 /* msecs */
+#define DIR869A1_KEYS_DEBOUNCE_INTERVAL	(3 * DIR869A1_KEYS_POLL_INTERVAL)
+
+
+#define DIR869A1_DEVDATA_ADDR		0x1f050000
+#define DIR869A1_DEVDATA_SIZE		0x10000
+
+#define DIR869A1_EEPROM_ADDR		0x1fff0000
+#define DIR869A1_WMAC_CALDATA_OFFSET	0x1000
+#define DIR869A1_PCI_CALDATA_OFFSET	0x5000
+
+
+static struct gpio_led dir869a1_leds_gpio[] __initdata = {
+	{
+		/* Actually, this GPIO controls the LED power,
+		 * while d-link:orange:status switches it between
+		 * orange and white */
+		.name		= "d-link:white:status",
+		.gpio		= DIR869A1_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "d-link:orange:status",
+		.gpio		= DIR869A1_GPIO_LED_ORANGE,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button dir869a1_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR869A1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR869A1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "mode",
+		.type		= EV_SW,
+		.code		= BTN_0,
+		.debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR869A1_GPIO_SWITCH_MODE,
+		.active_low	= 0,
+	},
+};
+
+
+static struct ar8327_pad_cfg dir869a1_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data dir869a1_ar8327_data = {
+	.pad0_cfg = &dir869a1_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+
+static struct mdio_board_info dir869a1_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &dir869a1_ar8327_data,
+	},
+};
+
+
+static void dir869a1_get_mac(const char *name, char *mac)
+{
+	u8 *nvram = (u8 *) KSEG1ADDR(DIR869A1_DEVDATA_ADDR);
+	int err;
+
+	err = ath79_nvram_parse_mac_addr(nvram, DIR869A1_DEVDATA_SIZE,
+					 name, mac);
+	if (err)
+		pr_err("no MAC address found for %s\n", name);
+}
+
+static void __init dir869a1_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(DIR869A1_EEPROM_ADDR);
+	u8 wlan24mac[ETH_ALEN] = {}, wlan5mac[ETH_ALEN] = {};
+
+	ath79_register_m25p80(NULL);
+
+	gpio_request_one(DIR869A1_GPIO_ENABLE_SWITCH,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "Switch power");
+
+	dir869a1_get_mac("lanmac=", ath79_eth0_data.mac_addr);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	mdiobus_register_board_info(dir869a1_mdio0_info,
+	                            ARRAY_SIZE(dir869a1_mdio0_info));
+
+	ath79_register_mdio(0, 0);
+	ath79_register_eth(0);
+
+	dir869a1_get_mac("wlan24mac=", wlan24mac);
+	ath79_register_wmac(eeprom + DIR869A1_WMAC_CALDATA_OFFSET, wlan24mac);
+
+	dir869a1_get_mac("wlan5mac=", wlan5mac);
+	ap91_pci_init(eeprom + DIR869A1_PCI_CALDATA_OFFSET, wlan5mac);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir869a1_leds_gpio),
+	                         dir869a1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, DIR869A1_KEYS_POLL_INTERVAL,
+	                                ARRAY_SIZE(dir869a1_gpio_keys),
+	                                dir869a1_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_869_A1, "DIR-869-A1", "D-Link DIR-869 rev. A1",
+             dir869a1_setup);