ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 191 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
deleted file mode 100644
index 2577dbffae..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * D-Link DAP-2695 rev. A1 support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DAP2695_GPIO_LED_GREEN_POWER	23
-#define DAP2695_GPIO_LED_RED_POWER	14
-#define DAP2695_GPIO_LED_WLAN_2G	13
-
-#define DAP2695_GPIO_BTN_RESET		17
-
-#define DAP2695_KEYS_POLL_INTERVAL	20	/* msecs */
-#define DAP2695_KEYS_DEBOUNCE_INTERVAL	(3 * DAP2695_KEYS_POLL_INTERVAL)
-
-#define DAP2695_NVRAM_ADDR		0x1f040000
-#define DAP2695_NVRAM_SIZE		0x10000
-
-#define DAP2695_MAC0_OFFSET		1
-#define DAP2695_MAC1_OFFSET		2
-#define DAP2695_WMAC_CALDATA_OFFSET	0x1000
-
-static struct gpio_led dap2695_leds_gpio[] __initdata = {
-	{
-		.name		= "d-link:green:power",
-		.gpio		= DAP2695_GPIO_LED_GREEN_POWER,
-		.active_low	= 1,
-	},
-	{
-		.name		= "d-link:red:power",
-		.gpio		= DAP2695_GPIO_LED_RED_POWER,
-		.active_low	= 1,
-	},
-	{
-		.name		= "d-link:green:wlan2g",
-		.gpio		= DAP2695_GPIO_LED_WLAN_2G,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button dap2695_gpio_keys[] __initdata = {
-	{
-		.desc			= "Soft reset",
-		.type			= EV_KEY,
-		.code			= KEY_RESTART,
-		.debounce_interval	= DAP2695_KEYS_DEBOUNCE_INTERVAL,
-		.gpio			= DAP2695_GPIO_BTN_RESET,
-		.active_low		= 1,
-	},
-};
-
-static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = {
-	.mode = AR8327_PAD_MAC_RGMII,
-	.txclk_delay_en = true,
-	.rxclk_delay_en = true,
-	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-	.mac06_exchange_dis = true,
-};
-
-static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = {
-	.mode = AR8327_PAD_MAC_SGMII,
-	.sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data dap2695_ar8327_data = {
-	.pad0_cfg = &dap2695_ar8327_pad0_cfg,
-	.pad6_cfg = &dap2695_ar8327_pad6_cfg,
-	.port0_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-	.port6_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-};
-
-static struct mdio_board_info dap2695_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = 0,
-		.platform_data = &dap2695_ar8327_data,
-	},
-};
-
-static struct flash_platform_data dap2695_flash_data = {
-	.type = "mx25l12805d",
-};
-
-static void dap2695_get_mac(const char *name, char *mac)
-{
-	u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR);
-	int err;
-
-	err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE,
-					 name, mac);
-	if (err)
-		pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init dap2695_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-	u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN];
-
-	dap2695_get_mac("lanmac=", mac0);
-	dap2695_get_mac("wanmac=", mac1);
-	dap2695_get_mac("wlanmac=", wmac0);
-
-	ath79_register_m25p80(&dap2695_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio),
-				 dap2695_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dap2695_gpio_keys),
-					dap2695_gpio_keys);
-
-	ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0);
-
-	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
-	ath79_register_mdio(0, 0x0);
-
-	mdiobus_register_board_info(dap2695_mdio0_info,
-					ARRAY_SIZE(dap2695_mdio0_info));
-
-	/* GMAC0 is connected to the RGMII interface */
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = BIT(0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-	ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
-	ath79_register_eth(0);
-
-	/* GMAC1 is connected to the SGMII interface */
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-	ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
-	ath79_register_eth(1);
-
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1",
-		"D-Link DAP-2695 rev. A1",
-		dap2695_setup);