diff options
author | Piotr Dymacz <pepe2k@gmail.com> | 2017-10-15 13:24:02 +0200 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-15 00:09:43 +0100 |
commit | 1f06144cdec1487122201faa9350825ed565d99c (patch) | |
tree | 6bfd763638f8fc308894dfa3420af8f55799d11d /target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c | |
parent | b38ff7847bdc915bd2a3ebfa8ff40b07867d6ae6 (diff) | |
download | upstream-1f06144cdec1487122201faa9350825ed565d99c.tar.gz upstream-1f06144cdec1487122201faa9350825ed565d99c.tar.bz2 upstream-1f06144cdec1487122201faa9350825ed565d99c.zip |
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c')
0 files changed, 0 insertions, 0 deletions