diff options
author | Marty Plummer <ntzrmtthihu777@gmail.com> | 2017-04-14 12:08:17 -0500 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-05-30 14:15:25 +0200 |
commit | 558d86923e3f5a62577036aa2bace2532163ca13 (patch) | |
tree | 01947ffaa9ab4341c6719e9fbd452b68f61a8cfa /target/linux/ar71xx/base-files | |
parent | 0f21873f7f1465f9ddd0ebde11716b966cb7665e (diff) | |
download | upstream-558d86923e3f5a62577036aa2bace2532163ca13.tar.gz upstream-558d86923e3f5a62577036aa2bace2532163ca13.tar.bz2 upstream-558d86923e3f5a62577036aa2bace2532163ca13.zip |
ar71xx: add support for EnGenius ENS202EXT
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.
The device is based on Qualcomm/Atheros AR9341 v1.
Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button
Flash instructions:
You have three options:
- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.
- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.
- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:
*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
ens202ext>mgmt
Management
---========= Commands Help =========---
admin -- Administration
mvlan -- Management VLAN settings
snmp -- SNMP settings
backup -- Backup/Restore settings
autorb -- Auto reboot settings
fwgrade -- Firmware upgrade
time -- Time settings
wifisch -- Wifi schedule
log -- Log
diag -- Diagnostics
disc -- Device Discovery
logout -- Logout
help -- Help
exit -- Exit
ens202ext/mgmt>fwgrade
Management --> Firmware upgrade
---========= Commands Help =========---
fwup -- Firmware upgrade
help -- Help
exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin
Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files')
4 files changed, 16 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 59a14271a7..7248ab1941 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -220,6 +220,13 @@ eap300v2) ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt" ;; +ens202ext) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "engenius:amber:wlan1" "wlan0" "1" "100" "0" "13" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "engenius:red:wlan2" "wlan0" "25" "100" "-39" "13" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "engenius:amber:wlan3" "wlan0" "50" "100" "-59" "13" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13" + ;; f9k1115v2) ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index ef48b133bd..ae43351c6a 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -175,6 +175,9 @@ get_status_led() { eap300v2) status_led="engenius:blue:power" ;; + ens202ext) + status_led="engenius:amber:power" + ;; eap7660d) status_led="$board:green:ds4" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index db5de727c1..e781c6ee7e 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -625,6 +625,9 @@ ar71xx_board_detect() { *"EmbWir-Dorin-Router") name="ew-dorin-router" ;; + *"ENS202EXT") + name="ens202ext" + ;; *"EPG5000") name="epg5000" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 848aeffacc..16701f64ca 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -236,6 +236,7 @@ platform_check_image() { dr531|\ dragino2|\ ebr-2310-c1|\ + ens202ext|\ epg5000|\ esr1750|\ esr900|\ @@ -757,7 +758,8 @@ platform_do_upgrade() { platform_do_upgrade_allnet "0x9f080000" "$ARGV" ;; cap4200ag|\ - eap300v2) + eap300v2|\ + ens202ext) platform_do_upgrade_allnet "0xbf0a0000" "$ARGV" ;; dir-825-b1|\ |