aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2017-07-25 13:32:47 +0200
committerFelix Fietkau <nbd@nbd.name>2017-10-19 16:14:19 +0200
commit9887afb1afcf387f6892315413e610a6816df463 (patch)
treee2a08b8cdff8f7e228fc872afb663ea2286ae920 /target/linux/ar71xx/base-files
parent184c92e7fb9e9cde71e38caf47b99ee3291fdc8e (diff)
downloadupstream-9887afb1afcf387f6892315413e610a6816df463.tar.gz
upstream-9887afb1afcf387f6892315413e610a6816df463.tar.bz2
upstream-9887afb1afcf387f6892315413e610a6816df463.zip
ar71xx: add support for TP-LINK Archer C7 v4
TP-Link Archer C7 v4 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9561+QCA9888. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f040000 +$filesize 3. cp.b $fileaddr 0x9f040000 $filesize 4. reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
Diffstat (limited to 'target/linux/ar71xx/base-files')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
6 files changed, 15 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 0694fe954f..27e6c8a033 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -58,7 +58,8 @@ sc1750|\
sc450)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
-archer-c25-v1)
+archer-c25-v1|\
+archer-c7-v4)
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
@@ -66,6 +67,12 @@ archer-c25-v1)
ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+ case "$board" in
+ archer-c7-v4)
+ ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
+ ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
+ ;;
+ esac
;;
archer-c58-v1|\
archer-c59-v1|\
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 46b217136d..a75f5fe29f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -428,6 +428,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
+ archer-c7-v4|\
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 7fa4ff0bcc..f4ad435ea7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -58,6 +58,7 @@ get_status_led() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ archer-c7-v4|\
fritz300e|\
gl-usb150|\
mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9a5f82b7cd..66796593c0 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -54,6 +54,7 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ archer-c7-v4|\
archer-c25-v1|\
archer-c59-v1|\
archer-c60-v1|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 929845110a..f89c0098e4 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -452,6 +452,9 @@ ar71xx_board_detect() {
*"Archer C5")
name="archer-c5"
;;
+ *"Archer C7 v4")
+ name="archer-c7-v4"
+ ;;
*"Archer C58 v1")
name="archer-c58-v1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 97d560189f..3d6d9ed57f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -211,6 +211,7 @@ platform_check_image() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ archer-c7-v4|\
bullet-m|\
c-55|\
carambola2|\