diff options
| author | David Bauer <mail@david-bauer.net> | 2018-05-29 17:00:53 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-06-07 09:31:58 +0200 |
| commit | e36f8b3f3980903d5cefc51fe274c19c7a0719f2 (patch) | |
| tree | 9b3a86a9d695efc09b565dcf88f14dbe28da7253 /target/linux/ar71xx/base-files/lib | |
| parent | a84962ea35e4e97f1c4a42f2eac0242cc2cbd879 (diff) | |
| download | upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.gz upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.bz2 upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.zip | |
ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala
SOC: Qualcomm QCA9558 (Scorpion)
RAM: 128MB
FLASH: 16MiB
WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2: QCA9880 5 GHz 802.11nac 3x3
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib')
| -rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 |
2 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index c64520d6f2..ce9225ec94 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -768,6 +768,9 @@ ar71xx_board_detect() { *"JWAP230") name="jwap230" ;; + *"Koala") + name="koala" + ;; *"LAN Turtle") name="lan-turtle" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index b3342e3feb..192c4a7608 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -689,6 +689,7 @@ platform_check_image() { # these boards use metadata images fritz300e|\ fritz4020|\ + koala|\ rb-750-r2|\ rb-750p-pbr2|\ rb-750up-r2|\ |