aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/lib
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-05-29 17:00:53 +0200
committerJohn Crispin <john@phrozen.org>2018-06-07 09:31:58 +0200
commite36f8b3f3980903d5cefc51fe274c19c7a0719f2 (patch)
tree9b3a86a9d695efc09b565dcf88f14dbe28da7253 /target/linux/ar71xx/base-files/lib
parenta84962ea35e4e97f1c4a42f2eac0242cc2cbd879 (diff)
downloadupstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.gz
upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.bz2
upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.zip
ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib')
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
2 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c64520d6f2..ce9225ec94 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -768,6 +768,9 @@ ar71xx_board_detect() {
*"JWAP230")
name="jwap230"
;;
+ *"Koala")
+ name="koala"
+ ;;
*"LAN Turtle")
name="lan-turtle"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index b3342e3feb..192c4a7608 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -689,6 +689,7 @@ platform_check_image() {
# these boards use metadata images
fritz300e|\
fritz4020|\
+ koala|\
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\