aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/lib
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2018-01-05 11:35:45 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2018-01-14 21:30:16 +0100
commit4b0eebe9dfa49f995474322f2c6998026534a5f8 (patch)
tree22e8ca9428a42da7aa590188145c3d408f749fc4 /target/linux/ar71xx/base-files/lib
parent62610129b23db2ff995191940b88a6e56d0a87d6 (diff)
downloadupstream-4b0eebe9dfa49f995474322f2c6998026534a5f8.tar.gz
upstream-4b0eebe9dfa49f995474322f2c6998026534a5f8.tar.bz2
upstream-4b0eebe9dfa49f995474322f2c6998026534a5f8.zip
ar71xx: add support for ALFA Network N5Q
ALFA Network N5Q is a successor of previous model, the N5 (outdoor CPE/AP, based on Atheros AR7240 + AR9280). New version is based on Atheros AR9344. Specification: - 550/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100 Mbps Ethernet, with passive PoE support (24 V) - 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm - 8x LED (7 are driven by GPIO) - 1x button (reset) - external h/w watchdog (EM6324QYSP5B, disabled and not used) - header for optional 802.3at/af PoE module - DC jack for main power input (optional, not installed by default) - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmare which is based on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib')
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
2 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index e90d89e20e..1de9d02965 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -768,6 +768,9 @@ ar71xx_board_detect() {
*"MZK-W300NH")
name="mzk-w300nh"
;;
+ *"N5Q")
+ name="n5q"
+ ;;
*"Nanostation M")
name="nanostation-m"
ubnt_xm_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 37c637b6f5..3bfedf82da 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -252,6 +252,7 @@ platform_check_image() {
loco-m-xw|\
mzk-w04nu|\
mzk-w300nh|\
+ n5q|\
nanostation-m|\
nanostation-m-xw|\
nbg460n_550n_550nh|\