diff options
| author | Christian Lamparter <chunkeey@googlemail.com> | 2016-10-05 14:53:11 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2016-10-15 11:36:50 +0200 |
| commit | 098f7156cc68d07a8eed9574c76b90c7ade77026 (patch) | |
| tree | 57d71f1eef6e8fa33320a617dee42309ebbf41c3 /target/linux/ar71xx/base-files/lib | |
| parent | e9455c561d4af68840421e3d442e4ad5ebfbedc6 (diff) | |
| download | upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.gz upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.bz2 upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.zip | |
ar71xx: add support for the Airtight C-60
This patch adds support for the Airtight C-60.
SOC: Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM: 128 MiB
NOR: MX25L3205D 4MiB
NAND: ST Micro NAND 32MiB 3,3V 8-bit
SW-NET: AR8327N (2 Ports)
WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip
The switch is setup for an accesspoint:
LAN1: (gigabit) is the wan-port.
LAN2: (fast ethernet) is bridged with the br-lan.
Flashing Guide (via initramfs):
1. Connect a PC to the serial port of the C-60.
power up the C-60.
Enter u-boot command prompt:
#> nand erase
#> setenv bootcmd "bootm 0x9f060000"
#> saveenv
#> setenv ipaddr 192.168.1.1
#> setenv netmask 255.255.255.0
#> setenv serverip 192.168.1.100
#> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
#> tftpboot
#> bootm
2. Wait for the C-60 to boot LEDE.
On the root prompt. Enter:
# ubiformat /dev/mtd4
# ubiattach -p /dev/mtd4
3. After that copy the sysupgrade.tar onto the router and run:
# sysupgrade sysupgrade.tar
to flash the image.
Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib')
3 files changed, 18 insertions, 12 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index a8ea7d48f2..940c1c95de 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -482,6 +482,9 @@ ar71xx_board_detect() { *C-55) name="c-55" ;; + *C-60) + name="c-60" + ;; *CAP4200AG) name="cap4200ag" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx index 60e278782f..50f59defe1 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx @@ -22,7 +22,8 @@ fetch_mac_from_mtd() { preinit_set_mac_address() { case $(ar71xx_board_name) in - c-55) + c-55|\ + c-60) mac_lan=$(mtd_get_mac_binary art 0) [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 010442c0cc..7c554e3f29 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -424,6 +424,14 @@ platform_check_image() { tew-673gru) dir825b_check_image "$1" && return 0 ;; + c-60|\ + nbg6716|\ + r6100|\ + wndr3700v4|\ + wndr4300) + nand_do_platform_check $board $1 + return $? + ;; cpe210|\ cpe510) tplink_pharos_check_image "$1" && return 0 @@ -485,13 +493,6 @@ platform_check_image() { return 0 ;; - nbg6716|\ - r6100|\ - wndr3700v4|\ - wndr4300) - nand_do_platform_check $board $1 - return $? - ;; tube2h) alfa_check_image "$1" && return 0 return 1 @@ -537,16 +538,17 @@ platform_pre_upgrade() { local board=$(ar71xx_board_name) case "$board" in - mr18|\ - z1) - merakinand_do_upgrade "$1" - ;; + c-60|\ nbg6716|\ r6100|\ wndr3700v4|\ wndr4300) nand_do_upgrade "$1" ;; + mr18|\ + z1) + merakinand_do_upgrade "$1" + ;; esac } |