aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/lib
diff options
context:
space:
mode:
authorPetr Štetiar <ynezz@true.cz>2018-11-17 08:01:55 +0100
committerPetr Štetiar <ynezz@true.cz>2019-04-08 18:37:04 +0200
commit0f8cdc28af2619d412b4a8f594b77ac6e7d27edd (patch)
tree9890f9edb484c7edbd97d61bcdc63c032d67d099 /target/linux/ar71xx/base-files/lib
parent6009b3fd586a1fd91400074080afb9545c6cf7e2 (diff)
downloadupstream-0f8cdc28af2619d412b4a8f594b77ac6e7d27edd.tar.gz
upstream-0f8cdc28af2619d412b4a8f594b77ac6e7d27edd.tar.bz2
upstream-0f8cdc28af2619d412b4a8f594b77ac6e7d27edd.zip
ar71xx: Add support for Ubiquity Bullet M (XW)
CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 100 MBit (24V PoE in) WLAN: 2.4/5 GHz UART: 1 UART on PCB marked as J1 with 115200 8N1 config LEDs: Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset UART connection details .---------------------------------. | | [ETH] J1 [ANT] | o VCC o RX o TX o GND | `---------------------------------' Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ar71xx-generic-ubnt-bullet-m-xw-squashfs-factory.bin Tested only on Bullet M2HP. Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib')
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
2 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 56a4fab80c..990683a55b 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -530,6 +530,9 @@ ar71xx_board_detect() {
name="bullet-m"
ubnt_xm_board_detect
;;
+ *"Bullet M XW")
+ name="bullet-m-xw"
+ ;;
*"BXU2000n-2 rev. A1")
name="bxu2000n-2-a1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 7fc3d4e3b3..81735017e5 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -218,6 +218,7 @@ platform_check_image() {
archer-c7-v4|\
archer-c7-v5|\
bullet-m|\
+ bullet-m-xw|\
c-55|\
carambola2|\
cf-e316n-v2|\