aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-12-18 14:51:28 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2018-01-14 20:33:18 +0100
commit7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd (patch)
treec5c476f181ce2d564c3baa30bf8aab11817f7d7d /target/linux/ar71xx/base-files/lib/upgrade/platform.sh
parentce6c7691ec8c33409587ebbce6d6e0a8b2c4431b (diff)
downloadupstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.tar.gz
upstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.tar.bz2
upstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.zip
ar71xx: add support for ALFA Network AP91-5G
ALFA Network AP91-5G is a 5 GHz outdoor AP/CPE board, based on Atheros AR7240 + AR9280. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 32 MB of RAM (DDR1) - 8 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet, with passive PoE support (24 V) - 1T1R 5 GHz (AR9280), with ext. PA (SE5004L) and LNA, up to 27 dBm - 6x LED (5 are driven by GPIO) - 1x button (reset) - external h/w watchdog (EM6324QYSP5B, disabled and not used) - header for optional 802.3at/af PoE module - DC jack for main power input (optional, not installed by default) - UART and LEDs headers on PCB Flash instruction: Use "factory" image in vendor GUI (in case of problems, make sure your board has up to date firmware). Alternatively, TFTP in U-Boot can be used: select option "2. Load system code then write to Flash via TFTP" during early boot and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib/upgrade/platform.sh')
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ecf6820a2b..37c637b6f5 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -310,6 +310,7 @@ platform_check_image() {
ap136-020|\
ap147-010|\
ap152|\
+ ap91-5g|\
ap96|\
arduino-yun|\
bhr-4grv2|\