diff options
author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:11:21 +0800 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 10:43:36 +0200 |
commit | ac03d51a3f4daa2f6a2a83f041dcd71674a9f724 (patch) | |
tree | 02a91d8c90dfb5b7d8240fd514a4915af5ffacc1 /target/linux/ar71xx/base-files/etc | |
parent | b74f63f81d6121b5eace3f0c0c87399f7e0fde92 (diff) | |
download | upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.tar.gz upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.tar.bz2 upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.zip |
ar71xx:add support for E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc')
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 3 | ||||
-rw-r--r-- | target/linux/ar71xx/base-files/etc/diag.sh | 1 |
2 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 3db4305043..2b3e8b739c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -66,7 +66,8 @@ cpe830|\ cpe870|\ dr531|\ e600g-v2|\ -e600gac-v2) +e600gac-v2|\ +e750a-v2) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 2a2fda3ac8..00b839ef59 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -26,6 +26,7 @@ get_status_led() { e1700ac-v2|\ e558-v2|\ e600gac-v2|\ + e750a-v4|\ eap120|\ minibox-v1|\ packet-squirrel|\ |