diff options
| author | Robert Marko <robimarko@gmail.com> | 2018-08-11 17:32:48 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-04-02 02:09:58 +0200 |
| commit | 99f6f2c0b8cbeb0c6ba464e080ab039984444f1f (patch) | |
| tree | a54b86b7214dee6c788f987f0955eb20c852ff6b /target/linux/ar71xx/base-files/etc | |
| parent | a2a972b2cfd762bc2207ffddde228737245ab926 (diff) | |
| download | upstream-99f6f2c0b8cbeb0c6ba464e080ab039984444f1f.tar.gz upstream-99f6f2c0b8cbeb0c6ba464e080ab039984444f1f.tar.bz2 upstream-99f6f2c0b8cbeb0c6ba464e080ab039984444f1f.zip | |
ar71xx: Add support for TP-Link CPE210 v3
Looks identical to the v2.
This PR adds support for a popular low-cost 2.4GHz N based AP
Specifications:
- SoC: Qualcomm Atheros QCA9533 (650MHz)
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC 2x2
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 |
2 files changed, 4 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index edca185c62..79f452d8cf 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -252,6 +252,7 @@ cf-e530n) ;; cpe210|\ cpe210-v2|\ +cpe210-v3|\ cpe510|\ wbs210|\ wbs510) @@ -262,7 +263,8 @@ wbs510) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" case "$board" in - cpe210-v2) + cpe210-v2|\ + cpe210-v3) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0" ;; *) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b6d77ee60f..a7b97bb3dd 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -74,6 +74,7 @@ ar71xx_setup_interfaces() cf-e380ac-v1|\ cf-e380ac-v2|\ cpe210-v2|\ + cpe210-v3|\ dr342|\ eap120|\ eap300v2|\ |