diff options
| author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:14:25 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 10:43:36 +0200 |
| commit | 53a45020135b504cb4bee0fa8d98c8eaf6391066 (patch) | |
| tree | 2cbde3c8b5b912e572871a9ca5b28a0e812e0640 /target/linux/ar71xx/base-files/etc | |
| parent | ac03d51a3f4daa2f6a2a83f041dcd71674a9f724 (diff) | |
| download | upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.tar.gz upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.tar.bz2 upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.zip | |
ar71xx:add support for E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (PoE support)
- 2x 10/100/1000 Mbps Ethernet
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/diag.sh | 1 |
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 2b3e8b739c..d15cff5111 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -67,7 +67,7 @@ cpe870|\ dr531|\ e600g-v2|\ e600gac-v2|\ -e750a-v2) +e750a-v4) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" @@ -373,7 +373,8 @@ e1700ac-v2) ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" ;; -e558-v2) +e558-v2|\ +e750g-v8) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; esr900) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index be5d9ad95d..3967dee94b 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -385,6 +385,7 @@ ar71xx_setup_interfaces() ucidef_add_switch_attr "switch0" "enable" "false" ;; e1700ac-v2|\ + e750g-v8|\ unifiac-pro|\ xd3200) ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 00b839ef59..45b5d2adbb 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -27,6 +27,7 @@ get_status_led() { e558-v2|\ e600gac-v2|\ e750a-v4|\ + e750g-v8|\ eap120|\ minibox-v1|\ packet-squirrel|\ |