aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/etc
diff options
context:
space:
mode:
authorChristian Lamparter <chunkeey@googlemail.com>2016-10-05 14:53:11 +0200
committerJohn Crispin <john@phrozen.org>2016-10-15 11:36:50 +0200
commit098f7156cc68d07a8eed9574c76b90c7ade77026 (patch)
tree57d71f1eef6e8fa33320a617dee42309ebbf41c3 /target/linux/ar71xx/base-files/etc
parente9455c561d4af68840421e3d442e4ad5ebfbedc6 (diff)
downloadupstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.gz
upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.bz2
upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.zip
ar71xx: add support for the Airtight C-60
This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
4 files changed, 12 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 308a05059f..5011af6ec9 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -92,6 +92,10 @@ c-55)
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt"
;;
+c-60)
+ ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt"
+ ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt"
+ ;;
cap4200ag)
ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 4ef43cf5a4..f720767fbb 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -199,6 +199,10 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "3:lan"
;;
+ c-60)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "3:wan" "4:lan"
+ ;;
cap324)
ucidef_set_interface_lan "eth0" "dhcp"
;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index d5ddb51240..0d069ec88c 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -73,7 +73,8 @@ get_status_led() {
cap324)
status_led="pcs:green:power"
;;
- c-55)
+ c-55|\
+ c-60)
status_led="$board:green:pwr"
;;
cap4200ag)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3141625307..945167bee6 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -53,7 +53,8 @@ board=$(ar71xx_board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
- c-55)
+ c-55|\
+ c-60)
ath9k_eeprom_extract "art" 4096 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
;;