diff options
| author | Arvid E. Picciani <aep@exys.org> | 2018-04-16 13:18:37 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-06-20 15:36:19 +0200 |
| commit | bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd (patch) | |
| tree | 36f86e487bf5157322489393ecfdcf0ce791e60d /target/linux/ar71xx/base-files/etc/board.d/02_network | |
| parent | c6e02b49f65cb4eff624a0831d3db265b3fadd2a (diff) | |
| download | upstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.tar.gz upstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.tar.bz2 upstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.zip | |
ar71xx: add support for TP-LINK Archer C7 v5
TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros
QCA9563+QCA9880.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 10x LED, 2x button
- UART header on PCB
Flash instruction:
1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface
Flash instruction using TFTP recovery:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin
and rename it to ArcherC7v5_tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Signed-off-by: Arvid E. Picciani <aep@exys.org>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index c8e10dae9c..d8039fdf6c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -488,6 +488,7 @@ ar71xx_setup_interfaces() "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; archer-c7-v4|\ + archer-c7-v5|\ tl-wdr4300|\ tl-wr1041n-v2) ucidef_add_switch "switch0" \ |