diff options
| author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:08:10 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 10:43:36 +0200 |
| commit | b74f63f81d6121b5eace3f0c0c87399f7e0fde92 (patch) | |
| tree | 2d45b29da178ec23a45436fabfa79c6d80e2af9d /target/linux/ar71xx/base-files/etc/board.d/02_network | |
| parent | 0aaa65075508035bdf6c8fc8fa9a79b94dc5eadc (diff) | |
| download | upstream-b74f63f81d6121b5eace3f0c0c87399f7e0fde92.tar.gz upstream-b74f63f81d6121b5eace3f0c0c87399f7e0fde92.tar.bz2 upstream-b74f63f81d6121b5eace3f0c0c87399f7e0fde92.zip | |
ar71xx:add support for E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9558)
- 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 4x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 3-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (JP5) and LEDs (J8) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index c04ecc838e..be5d9ad95d 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -390,6 +390,11 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:wan" ;; + e558-v2) + ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" + ucidef_add_switch "switch0" \ + "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan" + ;; ebr-2310-c1) ucidef_set_interfaces_lan_wan "eth0.1" "eth1" ucidef_add_switch "switch0" \ |