diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2017-10-17 23:30:01 +0200 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-15 00:12:13 +0100 |
| commit | 2e5252d346e2ec832a203af778b5c1d949f0ae5f (patch) | |
| tree | e52b574b76b90886364ab22f96ae028daad48eb4 /target/linux/ar71xx/base-files/etc/board.d/01_leds | |
| parent | 6cf682e214910e0bbef440f372fd63590733a24b (diff) | |
| download | upstream-2e5252d346e2ec832a203af778b5c1d949f0ae5f.tar.gz upstream-2e5252d346e2ec832a203af778b5c1d949f0ae5f.tar.bz2 upstream-2e5252d346e2ec832a203af778b5c1d949f0ae5f.zip | |
ar71xx: add support for GL.iNet GL-AR750
GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on
Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750.
Specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3x 10/100 Mbps Ethernet
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 1x USB 2.0 (power controlled by GPIO)
- 1x microSD (GL857L)
- 3x LED (all driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- header for optional PoE module
- 1x micro USB for main power input
- UART + I2C header on PCB
Flash instruction:
Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used
to flash OpenWrt/LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index f39109af44..fac9dfa7ab 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -407,6 +407,10 @@ dlan-pro-1200-ac) gl-ar300m) ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" ;; +gl-ar750) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt" + ;; gl-mifi) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" |