ar7: drop linux 3.9 support

Linux 3.9 is EOL since quite a while, no need to keep support for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38370

1 files changed, 0 insertions, 52 deletions

diff --git a/target/linux/ar7/patches-3.9/950-cpmac_titan.patch b/target/linux/ar7/patches-3.9/950-cpmac_titan.patch
deleted file mode 100644
index bc31222cb8..0000000000
--- a/target/linux/ar7/patches-3.9/950-cpmac_titan.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/drivers/net/ethernet/ti/cpmac.c
-+++ b/drivers/net/ethernet/ti/cpmac.c
-@@ -1155,6 +1155,8 @@ static int cpmac_probe(struct platform_d
- 		goto fail;
- 	}
- 
-+	ar7_device_reset(pdata->reset_bit);
-+
- 	dev->irq = platform_get_irq_byname(pdev, "irq");
- 
- 	dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1233,7 +1235,7 @@ int cpmac_init(void)
- 	cpmac_mii->reset = cpmac_mdio_reset;
- 	cpmac_mii->irq = mii_irqs;
- 
--	cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+	cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
- 
- 	if (!cpmac_mii->priv) {
- 		printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1244,10 +1246,16 @@ int cpmac_init(void)
- #warning FIXME: unhardcode gpio&reset bits
- 	ar7_gpio_disable(26);
- 	ar7_gpio_disable(27);
--	ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
--	ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+	if (!ar7_is_titan()) {
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+	}
- 	ar7_device_reset(AR7_RESET_BIT_EPHY);
- 
-+	if (ar7_is_titan())
-+		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- 	cpmac_mii->reset(cpmac_mii);
- 
- 	for (i = 0; i < 300; i++) {
-@@ -1264,7 +1272,11 @@ int cpmac_init(void)
- 		mask = 0;
- 	}
- 
--	cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+	if (ar7_is_titan())
-+		cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
-+	else
-+		cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+
- 	snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
- 
- 	res = mdiobus_register(cpmac_mii);