diff options
author | Jonas Gorski <jogo@openwrt.org> | 2013-10-12 10:50:44 +0000 |
---|---|---|
committer | Jonas Gorski <jogo@openwrt.org> | 2013-10-12 10:50:44 +0000 |
commit | 2b6cea4a6e3b71dbfc8ae51775310933aae796b6 (patch) | |
tree | 904dffa29a1d5e05570e553fd99318227240fdd0 /target/linux/ar7/patches-3.10 | |
parent | 33018b3e4563d074d27312a92e34b3f8e05b1b73 (diff) | |
download | upstream-2b6cea4a6e3b71dbfc8ae51775310933aae796b6.tar.gz upstream-2b6cea4a6e3b71dbfc8ae51775310933aae796b6.tar.bz2 upstream-2b6cea4a6e3b71dbfc8ae51775310933aae796b6.zip |
ar7: add support for linux 3.10 and switch to it
Run tested on WAG354Gv2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38369 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar7/patches-3.10')
12 files changed, 1019 insertions, 0 deletions
diff --git a/target/linux/ar7/patches-3.10/110-flash.patch b/target/linux/ar7/patches-3.10/110-flash.patch new file mode 100644 index 0000000000..18ae78bfb6 --- /dev/null +++ b/target/linux/ar7/patches-3.10/110-flash.patch @@ -0,0 +1,22 @@ +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -15,7 +15,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o +-obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o ++obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -199,7 +199,7 @@ static struct resource physmap_flash_res + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, +- .end = 0x107fffff, ++ .end = 0x11ffffff, + }; + + static const char *ar7_probe_types[] = { "ar7part", NULL }; diff --git a/target/linux/ar7/patches-3.10/120-gpio_chrdev.patch b/target/linux/ar7/patches-3.10/120-gpio_chrdev.patch new file mode 100644 index 0000000000..15bc6c3efd --- /dev/null +++ b/target/linux/ar7/patches-3.10/120-gpio_chrdev.patch @@ -0,0 +1,28 @@ +--- a/drivers/char/Kconfig ++++ b/drivers/char/Kconfig +@@ -464,6 +464,15 @@ config MWAVE + To compile this driver as a module, choose M here: the + module will be called mwave. + ++config AR7_GPIO ++ tristate "TI AR7 GPIO Support" ++ depends on AR7 ++ help ++ Give userspace access to the GPIO pins on the Texas Instruments AR7 ++ processors. ++ ++ If compiled as a module, it will be called ar7_gpio. ++ + config SCx200_GPIO + tristate "NatSemi SCx200 GPIO Support" + depends on SCx200 +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -43,6 +43,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/ + obj-$(CONFIG_PPDEV) += ppdev.o + obj-$(CONFIG_NWBUTTON) += nwbutton.o + obj-$(CONFIG_NWFLASH) += nwflash.o ++obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o + obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o + obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o + obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-3.10/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-3.10/160-vlynq_try_remote_first.patch new file mode 100644 index 0000000000..1d1310d82e --- /dev/null +++ b/target/linux/ar7/patches-3.10/160-vlynq_try_remote_first.patch @@ -0,0 +1,300 @@ +--- a/drivers/vlynq/vlynq.c ++++ b/drivers/vlynq/vlynq.c +@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev + return 0; + } + ++static volatile int vlynq_delay_value_new = 0; ++ ++static void vlynq_delay_wait(u32 count) ++{ ++ /* Code adopted from original vlynq driver */ ++ int i = 0; ++ volatile int *ptr = &vlynq_delay_value_new; ++ *ptr = 0; ++ ++ /* We are assuming that the each cycle takes about ++ * 23 assembly instructions. */ ++ for(i = 0; i < (count + 23)/23; i++) ++ *ptr = *ptr + 1; ++} ++ + static void vlynq_reset(struct vlynq_device *dev) + { ++ u32 rtm = readl(&dev->local->revision); ++ ++ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ? ++ 0 : 0x600000; ++ + writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET, + &dev->local->control); + + /* Wait for the devices to finish resetting */ +- msleep(5); ++ vlynq_delay_wait(0xffffff); + + /* Remove reset bit */ +- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET, ++ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm, + &dev->local->control); + + /* Give some time for the devices to settle */ +- msleep(5); ++ vlynq_delay_wait(0xffffff); + } + + static void vlynq_irq_unmask(struct irq_data *d) +@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn + } + EXPORT_SYMBOL(vlynq_unregister_driver); + ++enum vlynq_clk_src { ++ vlynq_clk_external, ++ vlynq_clk_local, ++ vlynq_clk_remote, ++ vlynq_clk_invalid, ++}; ++ ++static int __vlynq_set_clocks(struct vlynq_device *dev, ++ enum vlynq_clk_src clk_dir, ++ int lclk_div, int rclk_div) ++{ ++ u32 reg; ++ ++ if (clk_dir == vlynq_clk_invalid) { ++ printk(KERN_ERR "%s: attempt to set invalid clocking\n", ++ dev_name(&dev->dev)); ++ return -EINVAL; ++ } ++ ++ reg = readl(&dev->local->control); ++ if (readl(&dev->local->revision) < 0x00010205) { ++ if (clk_dir & vlynq_clk_local) ++ reg |= VLYNQ_CTRL_CLOCK_INT; ++ else ++ reg &= ~VLYNQ_CTRL_CLOCK_INT; ++ } ++ reg &= ~VLYNQ_CTRL_CLOCK_MASK; ++ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div); ++ writel(reg, &dev->local->control); ++ ++ if (!vlynq_linked(dev)) ++ return -ENODEV; ++ ++ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n", ++ dev_name(&dev->dev), readl(&dev->local->revision)); ++ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n", ++ dev_name(&dev->dev), readl(&dev->remote->revision)); ++ ++ reg = readl(&dev->remote->control); ++ if (readl(&dev->remote->revision) < 0x00010205) { ++ if (clk_dir & vlynq_clk_remote) ++ reg |= VLYNQ_CTRL_CLOCK_INT; ++ else ++ reg &= ~VLYNQ_CTRL_CLOCK_INT; ++ } ++ reg &= ~VLYNQ_CTRL_CLOCK_MASK; ++ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div); ++ writel(reg, &dev->remote->control); ++ ++ if (!vlynq_linked(dev)) ++ return -ENODEV; ++ ++ return 0; ++} ++ + /* + * A VLYNQ remote device can clock the VLYNQ bus master + * using a dedicated clock line. In that case, both the +@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly + int i; + + vlynq_reset(dev); +- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ? +- i <= vlynq_rdiv8 : i >= vlynq_rdiv2; +- dev->dev_id ? i++ : i--) { ++ for (i = 0; i <= 7; i++) { + + if (!vlynq_linked(dev)) + break; + +- writel((readl(&dev->remote->control) & +- ~VLYNQ_CTRL_CLOCK_MASK) | +- VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), +- &dev->remote->control); +- writel((readl(&dev->local->control) +- & ~(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_MASK)) | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { +- printk(KERN_DEBUG +- "%s: using remote clock divisor %d\n", +- dev_name(&dev->dev), i - vlynq_rdiv1 + 1); +- dev->divisor = i; ++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) { ++ printk(KERN_INFO ++ "%s: using remote clock divisor %d\n", ++ dev_name(&dev->dev), i + 1); ++ dev->divisor = i + vlynq_rdiv1; + return 0; + } else { + vlynq_reset(dev); +@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly + */ + static int __vlynq_try_local(struct vlynq_device *dev) + { +- int i; ++ int i, dir = !dev->dev_id; + + vlynq_reset(dev); + +- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ? +- i <= vlynq_ldiv8 : i >= vlynq_ldiv2; +- dev->dev_id ? i++ : i--) { +- +- writel((readl(&dev->local->control) & +- ~VLYNQ_CTRL_CLOCK_MASK) | +- VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { +- printk(KERN_DEBUG +- "%s: using local clock divisor %d\n", +- dev_name(&dev->dev), i - vlynq_ldiv1 + 1); +- dev->divisor = i; ++ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) { ++ ++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) { ++ printk(KERN_INFO ++ "%s: using local clock divisor %d\n", ++ dev_name(&dev->dev), i + 1); ++ dev->divisor = i + vlynq_ldiv1; + return 0; + } else { + vlynq_reset(dev); +@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v + if (!vlynq_linked(dev)) + return -ENODEV; + +- writel((readl(&dev->remote->control) & +- ~VLYNQ_CTRL_CLOCK_INT), +- &dev->remote->control); +- +- writel((readl(&dev->local->control) & +- ~VLYNQ_CTRL_CLOCK_INT), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { +- printk(KERN_DEBUG "%s: using external clock\n", +- dev_name(&dev->dev)); +- dev->divisor = vlynq_div_external; ++ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) { ++ printk(KERN_INFO "%s: using external clock\n", ++ dev_name(&dev->dev)); ++ dev->divisor = vlynq_div_external; + return 0; + } + +@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct + return result; + + switch (dev->divisor) { +- case vlynq_div_external: + case vlynq_div_auto: + /* When the device is brought from reset it should have clock + * generation negotiated by hardware. + * Check which device is generating clocks and perform setup + * accordingly */ +- if (vlynq_linked(dev) && readl(&dev->remote->control) & +- VLYNQ_CTRL_CLOCK_INT) { +- if (!__vlynq_try_remote(dev) || +- !__vlynq_try_local(dev) || +- !__vlynq_try_external(dev)) +- return 0; +- } else { +- if (!__vlynq_try_external(dev) || +- !__vlynq_try_local(dev) || +- !__vlynq_try_remote(dev)) +- return 0; +- } ++ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev)) ++ return 0; ++ case vlynq_div_external: ++ if (!__vlynq_try_external(dev)) ++ return 0; + break; + case vlynq_ldiv1: + case vlynq_ldiv2: +@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct + case vlynq_ldiv6: + case vlynq_ldiv7: + case vlynq_ldiv8: +- writel(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - +- vlynq_ldiv1), &dev->local->control); +- writel(0, &dev->remote->control); +- if (vlynq_linked(dev)) { +- printk(KERN_DEBUG +- "%s: using local clock divisor %d\n", +- dev_name(&dev->dev), +- dev->divisor - vlynq_ldiv1 + 1); ++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor - ++ vlynq_ldiv1, 0)) { ++ printk(KERN_INFO ++ "%s: using local clock divisor %d\n", ++ dev_name(&dev->dev), ++ dev->divisor - vlynq_ldiv1 + 1); + return 0; + } + break; +@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct + case vlynq_rdiv6: + case vlynq_rdiv7: + case vlynq_rdiv8: +- writel(0, &dev->local->control); +- writel(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - +- vlynq_rdiv1), &dev->remote->control); +- if (vlynq_linked(dev)) { +- printk(KERN_DEBUG +- "%s: using remote clock divisor %d\n", +- dev_name(&dev->dev), +- dev->divisor - vlynq_rdiv1 + 1); ++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0, ++ dev->divisor - vlynq_rdiv1)) { ++ printk(KERN_INFO ++ "%s: using remote clock divisor %d\n", ++ dev_name(&dev->dev), ++ dev->divisor - vlynq_rdiv1 + 1); + return 0; + } + break; + } +- ++ vlynq_reset(dev); + ops->off(dev); + return -ENODEV; + } +@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d + platform_set_drvdata(pdev, dev); + + printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", +- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq, +- (void *)dev->mem_start); ++ dev_name(&dev->dev), (void *)dev->regs_start, ++ dev->irq, (void *)dev->mem_start); + + dev->dev_id = 0; + dev->divisor = vlynq_div_auto; +- result = __vlynq_enable_device(dev); +- if (result == 0) { ++ if (!__vlynq_enable_device(dev)) { + dev->dev_id = readl(&dev->remote->chip); ++ vlynq_reset(dev); + ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev); + } + if (dev->dev_id) diff --git a/target/linux/ar7/patches-3.10/200-free-mem-below-kernel-offset.patch b/target/linux/ar7/patches-3.10/200-free-mem-below-kernel-offset.patch new file mode 100644 index 0000000000..4011942d79 --- /dev/null +++ b/target/linux/ar7/patches-3.10/200-free-mem-below-kernel-offset.patch @@ -0,0 +1,15 @@ +--- a/arch/mips/ar7/memory.c ++++ b/arch/mips/ar7/memory.c +@@ -66,5 +66,11 @@ void __init prom_meminit(void) + + void __init prom_free_prom_memory(void) + { +- /* Nothing to free */ ++ /* adapted from arch/mips/txx9/generic/setup.c */ ++ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE; ++ unsigned long eaddr = __pa_symbol(&_text); ++ ++ /* free memory between prom-record and kernel _text base */ ++ if (saddr < eaddr) ++ free_init_pages("prom memory", saddr, eaddr); + } diff --git a/target/linux/ar7/patches-3.10/300-add-ac49x-platform.patch b/target/linux/ar7/patches-3.10/300-add-ac49x-platform.patch new file mode 100644 index 0000000000..e1b11272df --- /dev/null +++ b/target/linux/ar7/patches-3.10/300-add-ac49x-platform.patch @@ -0,0 +1,85 @@ +--- a/arch/mips/ar7/Platform ++++ b/arch/mips/ar7/Platform +@@ -3,4 +3,9 @@ + # + platform-$(CONFIG_AR7) += ar7/ + cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 +-load-$(CONFIG_AR7) += 0xffffffff94100000 ++load-$(CONFIG_AR7_TI) += 0xffffffff94100000 ++ ++# ++# AudioCodes AC49x ++# ++load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000 +--- a/arch/mips/ar7/setup.c ++++ b/arch/mips/ar7/setup.c +@@ -69,6 +69,10 @@ const char *get_system_type(void) + return "TI AR7 (TNETV1056)"; + case TITAN_CHIP_1060: + return "TI AR7 (TNETV1060)"; ++ case TITAN_CHIP_AC495: ++ return "AudioCodes AC495"; ++ case TITAN_CHIP_AC496: ++ return "AudioCodes AC496"; + } + default: + return "TI AR7 (unknown)"; +--- a/arch/mips/include/asm/mach-ar7/ar7.h ++++ b/arch/mips/include/asm/mach-ar7/ar7.h +@@ -92,6 +92,8 @@ + #define TITAN_CHIP_1055 0x0e + #define TITAN_CHIP_1056 0x0d + #define TITAN_CHIP_1060 0x07 ++#define TITAN_CHIP_AC495 0x00 ++#define TITAN_CHIP_AC496 0x02 + + /* Interrupts */ + #define AR7_IRQ_UART0 15 +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -86,7 +86,7 @@ config AR7 + select HAVE_CLK + help + Support for the Texas Instruments AR7 System-on-a-Chip +- family: TNETD7100, 7200 and 7300. ++ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x. + + config ATH79 + bool "Atheros AR71XX/AR724X/AR913X based boards" +@@ -839,6 +839,7 @@ config NLM_XLP_BOARD + endchoice + + source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ar7/Kconfig" + source "arch/mips/ath79/Kconfig" + source "arch/mips/bcm47xx/Kconfig" + source "arch/mips/bcm63xx/Kconfig" +--- /dev/null ++++ b/arch/mips/ar7/Kconfig +@@ -0,0 +1,26 @@ ++if AR7 ++ ++config AR7_TI ++ bool ++ ++config AR7_AC49X ++ bool ++ ++choice ++ prompt "AR7 SoC family selection" ++ default AR7_TYPE_TI ++ depends on AR7 ++ help ++ Select AR7 MIPS SoC implementation. ++ ++ config AR7_TYPE_TI ++ bool "Texas Instruments AR7" ++ select AR7_TI ++ ++ config AR7_TYPE_AC49X ++ bool "AudioCodes AC49X" ++ select AR7_AC49X ++ ++endchoice ++ ++endif diff --git a/target/linux/ar7/patches-3.10/310-ac49x-prom-support.patch b/target/linux/ar7/patches-3.10/310-ac49x-prom-support.patch new file mode 100644 index 0000000000..dddf22106a --- /dev/null +++ b/target/linux/ar7/patches-3.10/310-ac49x-prom-support.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ar7/prom.c ++++ b/arch/mips/ar7/prom.c +@@ -70,6 +70,7 @@ struct psbl_rec { + }; + + static const char psp_env_version[] __initconst = "TIENV0.8"; ++static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2"; + + struct psp_env_chunk { + u8 num; +@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e + struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); + void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + +- if (strcmp(psp_env, psp_env_version) == 0) { ++ if (strcmp(psp_env, psp_env_version) == 0 || ++ strcmp(psp_env, psp_env_version_ac49x) == 0) { + parse_psp_env(psp_env); + } else { + for (i = 0; i < MAX_ENTRY; i++, env++) diff --git a/target/linux/ar7/patches-3.10/320-ac49x-mtd-partitions.patch b/target/linux/ar7/patches-3.10/320-ac49x-mtd-partitions.patch new file mode 100644 index 0000000000..3bccd3e187 --- /dev/null +++ b/target/linux/ar7/patches-3.10/320-ac49x-mtd-partitions.patch @@ -0,0 +1,35 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -188,6 +188,11 @@ config MTD_OF_PARTS + the partition map from the children of the flash node, + as described in Documentation/devicetree/booting-without-of.txt. + ++config MTD_AC49X_PARTS ++ tristate "AudioCodes AC49X partitioning support" ++ ---help--- ++ AudioCodes AC49X partitioning support ++ + config MTD_AR7_PARTS + tristate "TI AR7 partitioning support" + ---help--- +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -14,6 +14,7 @@ mtd-$(CONFIG_MTD_SPLIT_UIMAGE_FW) += mtd + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o ++obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -202,7 +202,7 @@ static struct resource physmap_flash_res + .end = 0x11ffffff, + }; + +-static const char *ar7_probe_types[] = { "ar7part", NULL }; ++static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL }; + + static struct physmap_flash_data physmap_flash_data = { + .width = 2, diff --git a/target/linux/ar7/patches-3.10/500-serial_kludge.patch b/target/linux/ar7/patches-3.10/500-serial_kludge.patch new file mode 100644 index 0000000000..bb341c67c4 --- /dev/null +++ b/target/linux/ar7/patches-3.10/500-serial_kludge.patch @@ -0,0 +1,28 @@ +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -323,6 +323,13 @@ static const struct serial8250_config ua + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, ++ [PORT_AR7] = { ++ .name = "TI-AR7", ++ .fifo_size = 16, ++ .tx_loadsz = 16, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, ++ .flags = UART_CAP_FIFO | UART_CAP_AFE, ++ }, + }; + + /* Uart divisor latch read */ +@@ -2839,7 +2846,11 @@ static void serial8250_console_putchar(s + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + ++#ifdef CONFIG_AR7 ++ wait_for_xmitr(up, BOTH_EMPTY); ++#else + wait_for_xmitr(up, UART_LSR_THRE); ++#endif + serial_port_out(port, UART_TX, ch); + } + diff --git a/target/linux/ar7/patches-3.10/920-ar7part.patch b/target/linux/ar7/patches-3.10/920-ar7part.patch new file mode 100644 index 0000000000..9948858d05 --- /dev/null +++ b/target/linux/ar7/patches-3.10/920-ar7part.patch @@ -0,0 +1,118 @@ +--- a/drivers/mtd/ar7part.c ++++ b/drivers/mtd/ar7part.c +@@ -30,11 +30,14 @@ + + #include <uapi/linux/magic.h> + ++#include <asm/mach-ar7/prom.h> ++ + #define AR7_PARTS 4 + #define ROOT_OFFSET 0xe0000 + + #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42) + #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281) ++#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c) + + struct ar7_bin_rec { + unsigned int checksum; +@@ -42,12 +45,16 @@ struct ar7_bin_rec { + unsigned int address; + }; + ++int create_titan_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data); ++ + static int create_mtd_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { + struct ar7_bin_rec header; +- unsigned int offset; ++ unsigned int offset, mtd_start, mtd_end; + size_t len; + unsigned int pre_size = master->erasesize, post_size = 0; + unsigned int root_offset = ROOT_OFFSET; +@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct + int retries = 10; + struct mtd_partition *ar7_parts; + ++ const char *prom_str = prom_getenv("ProductID"); ++ char mtd_name[] = "mtd1"; ++ if(prom_str && ++ (strcmp(prom_str, "CYWL")==0 || ++ strcmp(prom_str, "CYWM")==0 || ++ strcmp(prom_str, "CYLM")==0 || ++ strcmp(prom_str, "CYLL")==0)){ ++ return create_titan_partitions(master, pparts, data); ++ } ++ + ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL); + if (!ar7_parts) + return -ENOMEM; +@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct + + pre_size = offset; + +- if (!ar7_parts[1].offset) { +- ar7_parts[1].offset = master->size - master->erasesize; +- post_size = master->erasesize; +- } +- + switch (header.checksum) { +- case LOADER_MAGIC1: +- while (header.length) { +- offset += sizeof(header) + header.length; +- mtd_read(master, offset, sizeof(header), &len, +- (uint8_t *)&header); +- } +- root_offset = offset + sizeof(header) + 4; +- break; + case LOADER_MAGIC2: ++ for (retries = 0; retries <= 9; retries++) { ++ mtd_name[3] = '0' + retries; ++ prom_str = prom_getenv(mtd_name); ++ if (prom_str == NULL) ++ continue; ++ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end); ++ if (pre_size == (mtd_start & 0x1ffffff)) { ++ ar7_parts[1].offset = mtd_end &= 0x1ffffff; ++ ar7_parts[1].size = post_size = master->size - mtd_end; ++ break; ++ } ++ } ++ case LOADER_MAGIC1: ++ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0; + while (header.length) { + offset += sizeof(header) + header.length; + mtd_read(master, offset, sizeof(header), &len, + (uint8_t *)&header); + } +- root_offset = offset + sizeof(header) + 4 + 0xff; +- root_offset &= ~(uint32_t)0xff; ++ root_offset += offset + sizeof(header); + break; + default: + printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum); + break; + } + ++ if (!ar7_parts[1].offset) { ++ post_size = master->erasesize; ++ ar7_parts[1].offset = master->size - post_size; ++ } ++ + mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header); + if (header.checksum != SQUASHFS_MAGIC) { + root_offset += master->erasesize - 1; +--- a/drivers/mtd/titanpart.c ++++ b/drivers/mtd/titanpart.c +@@ -149,7 +149,7 @@ static void titan_add_partition(char * e + } + int create_titan_partitions(struct mtd_info *master, + struct mtd_partition **pparts, +- unsigned long origin) ++ struct mtd_part_parser_data *data) + { + struct nsp_img_hdr_head hdr; + struct nsp_img_hdr_section_info sect_info; diff --git a/target/linux/ar7/patches-3.10/925-actiontec_leds.patch b/target/linux/ar7/patches-3.10/925-actiontec_leds.patch new file mode 100644 index 0000000000..41af2cb54f --- /dev/null +++ b/target/linux/ar7/patches-3.10/925-actiontec_leds.patch @@ -0,0 +1,95 @@ +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -465,31 +465,22 @@ static struct gpio_led fb_fon_leds[] = { + }, + }; + +-static struct gpio_led gt701_leds[] = { ++static struct gpio_led actiontec_leds[] = { + { + .name = "inet:green", + .gpio = 13, +- .active_low = 1, +- }, +- { +- .name = "usb", +- .gpio = 12, +- .active_low = 1, + }, + { + .name = "inet:red", + .gpio = 9, +- .active_low = 1, + }, + { +- .name = "power:red", ++ .name = "power:green", + .gpio = 7, +- .active_low = 1, + }, + { +- .name = "power:green", ++ .name = "power:red", + .gpio = 8, +- .active_low = 1, + .default_trigger = "default-on", + }, + { +@@ -497,6 +488,44 @@ static struct gpio_led gt701_leds[] = { + .gpio = 10, + .active_low = 1, + }, ++ { ++ .name = "wifi", ++ .gpio = 6, ++ .active_low = 1, ++ }, ++ { ++ .name = "wifi:red", ++ .gpio = 3, ++ }, ++ { ++ .name = "standby", ++ .gpio = 4, ++ }, ++ { ++ .name = "wps", ++ .gpio = 16, ++ .active_low = 1, ++ }, ++ { ++ .name = "usb", ++ .gpio = 12, ++ .active_low = 1, ++ }, ++ { ++ .name = "voip", ++ .gpio = 15, ++ .active_low = 1, ++ }, ++ { ++ .name = "line1", ++ .gpio = 23, ++ .active_low = 1, ++ }, ++ { ++ .name = "line2", ++ .gpio = 25, ++ .active_low = 1, ++ }, + }; + + static struct gpio_led_platform_data ar7_led_data; +@@ -540,9 +569,9 @@ static void __init detect_leds(void) + } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { + ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); + ar7_led_data.leds = titan_leds; +- } else if (strstr(prid, "GT701")) { +- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds); +- ar7_led_data.leds = gt701_leds; ++ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) { ++ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds); ++ ar7_led_data.leds = actiontec_leds; + } + } + diff --git a/target/linux/ar7/patches-3.10/950-cpmac_titan.patch b/target/linux/ar7/patches-3.10/950-cpmac_titan.patch new file mode 100644 index 0000000000..bc31222cb8 --- /dev/null +++ b/target/linux/ar7/patches-3.10/950-cpmac_titan.patch @@ -0,0 +1,52 @@ +--- a/drivers/net/ethernet/ti/cpmac.c ++++ b/drivers/net/ethernet/ti/cpmac.c +@@ -1155,6 +1155,8 @@ static int cpmac_probe(struct platform_d + goto fail; + } + ++ ar7_device_reset(pdata->reset_bit); ++ + dev->irq = platform_get_irq_byname(pdev, "irq"); + + dev->netdev_ops = &cpmac_netdev_ops; +@@ -1233,7 +1235,7 @@ int cpmac_init(void) + cpmac_mii->reset = cpmac_mdio_reset; + cpmac_mii->irq = mii_irqs; + +- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256); ++ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256); + + if (!cpmac_mii->priv) { + printk(KERN_ERR "Can't ioremap mdio registers\n"); +@@ -1244,10 +1246,16 @@ int cpmac_init(void) + #warning FIXME: unhardcode gpio&reset bits + ar7_gpio_disable(26); + ar7_gpio_disable(27); +- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); +- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); ++ ++ if (!ar7_is_titan()) { ++ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); ++ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); ++ } + ar7_device_reset(AR7_RESET_BIT_EPHY); + ++ if (ar7_is_titan()) ++ ar7_device_reset(TITAN_RESET_BIT_EPHY1); ++ + cpmac_mii->reset(cpmac_mii); + + for (i = 0; i < 300; i++) { +@@ -1264,7 +1272,11 @@ int cpmac_init(void) + mask = 0; + } + +- cpmac_mii->phy_mask = ~(mask | 0x80000000); ++ if (ar7_is_titan()) ++ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); ++ else ++ cpmac_mii->phy_mask = ~(mask | 0x80000000); ++ + snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1"); + + res = mdiobus_register(cpmac_mii); diff --git a/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch b/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch new file mode 100644 index 0000000000..db290b4e95 --- /dev/null +++ b/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch @@ -0,0 +1,221 @@ +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -712,26 +712,23 @@ static int __init ar7_register_devices(v + } + + if (ar7_has_high_cpmac()) { ++ cpmac_get_mac(0, cpmac_high_data.dev_addr); ++ + res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); +- if (!res) { +- cpmac_get_mac(1, cpmac_high_data.dev_addr); ++ if (!res) ++ pr_warning("unable to register fixed phy for cpmac-high: %d\n", res); + +- res = platform_device_register(&cpmac_high); +- if (res) +- pr_warning("unable to register cpmac-high: %d\n", res); +- } else +- pr_warning("unable to add cpmac-high phy: %d\n", res); +- } else ++ res = platform_device_register(&cpmac_high); ++ if (res) ++ pr_warning("unable to register cpmac-high: %d\n", res); ++ cpmac_get_mac(1, cpmac_low_data.dev_addr); ++ } else { + cpmac_low_data.phy_mask = 0xffffffff; +- +- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); +- if (!res) { + cpmac_get_mac(0, cpmac_low_data.dev_addr); +- res = platform_device_register(&cpmac_low); +- if (res) +- pr_warning("unable to register cpmac-low: %d\n", res); +- } else +- pr_warning("unable to add cpmac-low phy: %d\n", res); ++ } ++ res = platform_device_register(&cpmac_low); ++ if (res) ++ pr_warning("unable to register cpmac-low: %d\n", res); + + detect_leds(); + res = platform_device_register(&ar7_gpio_leds); +--- a/arch/mips/include/asm/mach-ar7/ar7.h ++++ b/arch/mips/include/asm/mach-ar7/ar7.h +@@ -42,6 +42,7 @@ + #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) + #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) + #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) ++#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08) + #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) + #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) + #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +--- a/drivers/net/ethernet/ti/cpmac.c ++++ b/drivers/net/ethernet/ti/cpmac.c +@@ -35,7 +35,6 @@ + #include <linux/skbuff.h> + #include <linux/mii.h> + #include <linux/phy.h> +-#include <linux/phy_fixed.h> + #include <linux/platform_device.h> + #include <linux/dma-mapping.h> + #include <linux/clk.h> +@@ -48,14 +47,11 @@ MODULE_LICENSE("GPL"); + MODULE_ALIAS("platform:cpmac"); + + static int debug_level = 8; +-static int dumb_switch; + +-/* Next 2 are only used in cpmac_probe, so it's pointless to change them */ ++/* Next is only used in cpmac_probe, so it's pointless to change them */ + module_param(debug_level, int, 0444); +-module_param(dumb_switch, int, 0444); + + MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable"); +-MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus"); + + #define CPMAC_VERSION "0.5.2" + /* frame size + 802.1q tag + FCS size */ +@@ -674,9 +670,8 @@ static void cpmac_hw_start(struct net_de + for (i = 0; i < 8; i++) + cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]); + cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]); +- cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] | +- (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) | +- (dev->dev_addr[3] << 24)); ++ cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *) ++ dev->dev_addr)); + cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE); + cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff); + cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff); +@@ -1120,25 +1115,19 @@ static int cpmac_probe(struct platform_d + + pdata = pdev->dev.platform_data; + +- if (external_switch || dumb_switch) { +- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ +- phy_id = pdev->id; +- } else { +- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { +- if (!(pdata->phy_mask & (1 << phy_id))) +- continue; +- if (!cpmac_mii->phy_map[phy_id]) +- continue; +- strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); +- break; +- } ++ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { ++ if (!(pdata->phy_mask & (1 << phy_id))) ++ continue; ++ if (!cpmac_mii->phy_map[phy_id]) ++ continue; ++ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); ++ break; + } + +- if (phy_id == PHY_MAX_ADDR) { +- dev_err(&pdev->dev, "no PHY present, falling back " +- "to switch on MDIO bus 0\n"); +- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ ++ if (phy_id == PHY_MAX_ADDR && pdev->id == 1) { ++ printk(KERN_ERR "cpmac: No PHY present, using fixed PHY\n"); + phy_id = pdev->id; ++ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); + } + + dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); +@@ -1174,6 +1163,13 @@ static int cpmac_probe(struct platform_d + snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, + mdio_bus_id, phy_id); + ++ rc = register_netdev(dev); ++ if (rc) { ++ printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, ++ dev->name); ++ goto fail; ++ } ++ + priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, + PHY_INTERFACE_MODE_MII); + +@@ -1185,13 +1181,6 @@ static int cpmac_probe(struct platform_d + goto fail; + } + +- rc = register_netdev(dev); +- if (rc) { +- printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, +- dev->name); +- goto fail; +- } +- + if (netif_msg_probe(priv)) { + printk(KERN_INFO + "cpmac: device %s (regs: %p, irq: %d, phy: %s, " +@@ -1224,6 +1213,7 @@ int cpmac_init(void) + { + u32 mask; + int i, res; ++ void __iomem *mii_reg; + + cpmac_mii = mdiobus_alloc(); + if (cpmac_mii == NULL) +@@ -1247,31 +1237,51 @@ int cpmac_init(void) + ar7_gpio_disable(26); + ar7_gpio_disable(27); + +- if (!ar7_is_titan()) { ++ if (ar7_is_titan()) { ++ ar7_device_reset(AR7_RESET_BIT_EPHY); ++ ar7_device_reset(TITAN_RESET_BIT_EPHY1); ++ } else { ++ ar7_device_reset(AR7_RESET_BIT_EPHY); + ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); + ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); + } +- ar7_device_reset(AR7_RESET_BIT_EPHY); +- +- if (ar7_is_titan()) +- ar7_device_reset(TITAN_RESET_BIT_EPHY1); + + cpmac_mii->reset(cpmac_mii); + + for (i = 0; i < 300; i++) { + mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE); ++ mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000); + if (mask) + break; + else + msleep(10); + } + +- mask &= 0x7fffffff; + if (mask & (mask - 1)) { + external_switch = 1; +- mask = 0; ++ if (!ar7_has_high_cpmac()) { ++ if (ar7_is_titan()) { ++ ar7_device_disable(AR7_RESET_BIT_EPHY); ++ ar7_device_disable(TITAN_RESET_BIT_EPHY1); ++ } else ++ ar7_device_disable(AR7_RESET_BIT_EPHY); ++ ++ //Titan remap might be different ++ mii_reg = ioremap(AR7_REGS_MII, 4); ++ if (mii_reg) { ++ writel(readl(mii_reg) | 1, mii_reg); ++ iounmap(mii_reg); ++ } ++ } + } + ++ if (external_switch) ++ printk(KERN_INFO "EXTERNAL SWITCH!!!\n"); ++ else if (mask) ++ printk(KERN_INFO "EXTERNAL PHY!!!\n"); ++ else ++ printk(KERN_INFO "INTERNAL PHY!!!\n"); ++ + if (ar7_is_titan()) + cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); + else |