diff options
author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-10-24 14:06:35 +0200 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-12-03 15:34:56 +0100 |
commit | e9a9b7d1ed76c88e097d5bc4dabf38735312558b (patch) | |
tree | 844dec550a138ed326345a8b3f1fdb8ade2ef6a6 /target/linux/apm821xx | |
parent | 40692f0fb55ca5bd2426701b3a9e64e3b7487a7d (diff) | |
download | upstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.tar.gz upstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.tar.bz2 upstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.zip |
ramips: add support for D-Link DWR-118-A1
The DWR-118-A1 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 3x 10/100 Mbps Ethernet (3 LAN)
- 2x 10/100/1000 Mbps ICPlus IP1001 Ethernet PHY (1 WAN AND 1 LAN)
- 1x internal, non-detachable antenna
- 2x external, non-detachable antennas
- 1x USB 2.0
- UART (J1) header on PCB (57600 8n1)
- 7x LED (5x GPIO-controlled), 2x button
- JBOOT bootloader
Known issues:
- WIFI 5G LED not working
- flash is very slow
The status led has been assigned to the dwr-118-a1:green:internet led.
At the end of the boot it is switched off and is available for other
operation. Work correctly also during sysupgrade operation.
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/apm821xx')
0 files changed, 0 insertions, 0 deletions