aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
diff options
context:
space:
mode:
authorChristian Lamparter <chunkeey@gmail.com>2018-09-30 11:40:13 +0200
committerChristian Lamparter <chunkeey@gmail.com>2018-12-27 14:36:23 +0100
commit32141c183a28a55fd3288397348ca820b77265d3 (patch)
tree04e7b6b8c5978a6362a0c519a990ac0441c54a40 /target/linux/apm821xx
parent96d55f9fd990beed06b79a65100ef7c942dc125d (diff)
downloadupstream-32141c183a28a55fd3288397348ca820b77265d3.tar.gz
upstream-32141c183a28a55fd3288397348ca820b77265d3.tar.bz2
upstream-32141c183a28a55fd3288397348ca820b77265d3.zip
apm821xx: add linux 4.19 apm821xx patches
This patch updates the apm821xx target to use the 4.19 kernel. 4.19 ships with all the crypto4xx driver patches. Furthermore, the DW-DMA fix for the SATA controller has been backported from 4.20 and integrated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/apm821xx')
-rw-r--r--target/linux/apm821xx/config-4.19337
-rw-r--r--target/linux/apm821xx/dts/apm82181.dtsi16
-rw-r--r--target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch155
-rw-r--r--target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch169
-rw-r--r--target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch30
-rw-r--r--target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch32
-rw-r--r--target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch51
-rw-r--r--target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch14
-rw-r--r--target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch545
-rw-r--r--target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch53
-rw-r--r--target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch65
-rw-r--r--target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch174
-rw-r--r--target/linux/apm821xx/sata/config-default1
13 files changed, 1640 insertions, 2 deletions
diff --git a/target/linux/apm821xx/config-4.19 b/target/linux/apm821xx/config-4.19
new file mode 100644
index 0000000000..3f57ec6b83
--- /dev/null
+++ b/target/linux/apm821xx/config-4.19
@@ -0,0 +1,337 @@
+# CONFIG_40x is not set
+CONFIG_44x=y
+CONFIG_460EX=y
+CONFIG_4xx=y
+CONFIG_4xx_SOC=y
+# CONFIG_ADVANCED_OPTIONS is not set
+CONFIG_APM821xx=y
+CONFIG_APOLLO3G=y
+# CONFIG_ARCHES is not set
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
+CONFIG_ARCH_HAS_PHYS_TO_DMA=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS=11
+CONFIG_ARCH_MMAP_RND_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
+CONFIG_AUDIT_ARCH=y
+# CONFIG_BAMBOO is not set
+CONFIG_BCH=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLUESTONE=y
+CONFIG_BOOKE=y
+CONFIG_BOOKE_WDT=y
+# CONFIG_BOUNCE is not set
+CONFIG_BUILD_SALT=""
+# CONFIG_CANYONLANDS is not set
+CONFIG_CC_HAS_SANCOV_TRACE_PC=y
+CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
+CONFIG_CC_IS_GCC=y
+CONFIG_CLANG_VERSION=0
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_CONSOLE_LOGLEVEL_QUIET=4
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEV_PPC4XX=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_KPP2=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5_PPC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DTC=y
+# CONFIG_E200 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EBONY is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EIGER is not set
+CONFIG_EXTRA_TARGETS="uImage"
+CONFIG_FIXED_PHY=y
+CONFIG_FREEZER=y
+# CONFIG_FSL_LBC is not set
+CONFIG_GCC_VERSION=70300
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_GLACIER is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_FASTPATH_LIMIT=512
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_PPC4XX=y
+CONFIG_HZ=1000
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_EMAC4=y
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RGMII=y
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_EMAC_TAH=y
+CONFIG_IBM_EMAC_TXB=128
+# CONFIG_ICE is not set
+# CONFIG_ICON is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_KATMAI is not set
+CONFIG_KERNEL_GZIP=y
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NF_LOG_BRIDGE is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_IRQS=512
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND=y
+# CONFIG_OVERLAY_FS_METACOPY is not set
+CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
+# CONFIG_OVERLAY_FS_XINO_AUTO is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_MSI=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYS_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+CONFIG_PM_AUTOSLEEP=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_PPC4xx_CPM=y
+CONFIG_PPC4xx_GPIO=y
+CONFIG_PPC4xx_MSI=y
+CONFIG_PPC4xx_OCM=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+# CONFIG_PPC64 is not set
+# CONFIG_PPC_47x is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_REGS=y
+# CONFIG_PPC_BOOK3S_32 is not set
+CONFIG_PPC_DCR=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MSI_BITMAP=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PPC_PTDUMP is not set
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+CONFIG_PTE_64BIT=y
+# CONFIG_RAINIER is not set
+# CONFIG_RANDOM_TRUST_CPU is not set
+CONFIG_RAS=y
+CONFIG_RD_GZIP=y
+# CONFIG_RENESAS_PHY is not set
+# CONFIG_RPMSG_VIRTIO is not set
+CONFIG_RSEQ=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SIMPLE_GPIO=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TAISHAN is not set
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_THREAD_SHIFT=13
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VDSO32=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
+# CONFIG_WARP is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WNDR4700 is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_XILINX_VCU is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_XIL_AXIS_FIFO is not set
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
+# CONFIG_YOSEMITE is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/apm821xx/dts/apm82181.dtsi b/target/linux/apm821xx/dts/apm82181.dtsi
index bd6786b40e..45d4eac171 100644
--- a/target/linux/apm821xx/dts/apm82181.dtsi
+++ b/target/linux/apm821xx/dts/apm82181.dtsi
@@ -21,6 +21,7 @@
*
*/
+#include <dt-bindings/dma/dw-dmac.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
@@ -384,7 +385,20 @@
interrupt-parent = <&UIC0>;
interrupts = <0x19 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <3>;
- /* use autoconfiguration for the dma setup */
+
+ dma-channels = <2>;
+ dma-masters = <3>;
+ block_size = <4095>;
+ data-width = <4>, <4>, <4>;
+ multi-block = <1>, <1>;
+
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+
+ snps,dma-protection-control =
+ <(DW_DMAC_HPROT1_PRIVILEGED_MODE |
+ DW_DMAC_HPROT2_BUFFERABLE)>;
+ is_memcpy;
};
SATA0: sata@bffd1000 {
diff --git a/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch b/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch
new file mode 100644
index 0000000000..3c4edff3eb
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/010-dmaengine-dw-dmac-implement-dma-prot.patch
@@ -0,0 +1,155 @@
+From 7b0c03ecc42fb223baf015877fee9d517c2c8af1 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 17 Nov 2018 17:17:21 +0100
+Subject: dmaengine: dw-dmac: implement dma protection control setting
+
+This patch adds a new device-tree property that allows to
+specify the dma protection control bits for the all of the
+DMA controller's channel uniformly.
+
+Setting the "correct" bits can have a huge impact on the
+PPC460EX and APM82181 that use this DMA engine in combination
+with a DesignWare' SATA-II core (sata_dwc_460ex driver).
+
+In the OpenWrt Forum, the user takimata reported that:
+|It seems your patch unleashed the full power of the SATA port.
+|Where I was previously hitting a really hard limit at around
+|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
+|
+|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
+|1024+0 records in
+|1024+0 records out
+|real 0m 13.65s
+|user 0m 0.01s
+|sys 0m 11.89s
+|
+|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
+|1024+0 records in
+|1024+0 records out
+|real 0m 8.41s
+|user 0m 0.01s
+|sys 0m 4.70s
+|
+|This means: 121 MB/s reading and 75 MB/s writing!
+|
+|The drive is a WD Green WD10EARX taken from an older MBL Single.
+|I repeated the test a few times with even larger files to rule out
+|any caching, I'm still seeing the same great performance. OpenWrt is
+|now completely on par with the original MBL firmware's performance.
+
+Another user And.short reported:
+|I can report that your fix worked! Boots up fine with two
+|drives even with more partitions, and no more reboot on
+|concurrent disk access!
+
+A closer look into the sata_dwc_460ex code revealed that
+the driver did initally set the correct protection control
+bits. However, this feature was lost when the sata_dwc_460ex
+driver was converted to the generic DMA driver framework.
+
+BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55
+BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50
+Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver")
+Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+
+diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
+index d0c3e50b39fb..2c5ca1961256 100644
+--- a/drivers/dma/dw/core.c
++++ b/drivers/dma/dw/core.c
+@@ -160,12 +160,14 @@ static void dwc_initialize_chan_idma32(struct dw_dma_chan *dwc)
+
+ static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc)
+ {
++ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+ u32 cfghi = DWC_CFGH_FIFO_MODE;
+ u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
+ bool hs_polarity = dwc->dws.hs_polarity;
+
+ cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
+ cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
++ cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl);
+
+ /* Set polarity of handshake interface */
+ cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0;
+diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
+index f01b2c173fa6..31ff8113c3de 100644
+--- a/drivers/dma/dw/platform.c
++++ b/drivers/dma/dw/platform.c
+@@ -162,6 +162,12 @@ dw_dma_parse_dt(struct platform_device *pdev)
+ pdata->multi_block[tmp] = 1;
+ }
+
++ if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) {
++ if (tmp > CHAN_PROTCTL_MASK)
++ return NULL;
++ pdata->protctl = tmp;
++ }
++
+ return pdata;
+ }
+ #else
+diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
+index 09e7dfdbb790..646c9c960c07 100644
+--- a/drivers/dma/dw/regs.h
++++ b/drivers/dma/dw/regs.h
+@@ -200,6 +200,10 @@ enum dw_dma_msize {
+ #define DWC_CFGH_FCMODE (1 << 0)
+ #define DWC_CFGH_FIFO_MODE (1 << 1)
+ #define DWC_CFGH_PROTCTL(x) ((x) << 2)
++#define DWC_CFGH_PROTCTL_DATA (0 << 2) /* data access - always set */
++#define DWC_CFGH_PROTCTL_PRIV (1 << 2) /* privileged -> AHB HPROT[1] */
++#define DWC_CFGH_PROTCTL_BUFFER (2 << 2) /* bufferable -> AHB HPROT[2] */
++#define DWC_CFGH_PROTCTL_CACHE (4 << 2) /* cacheable -> AHB HPROT[3] */
+ #define DWC_CFGH_DS_UPD_EN (1 << 5)
+ #define DWC_CFGH_SS_UPD_EN (1 << 6)
+ #define DWC_CFGH_SRC_PER(x) ((x) << 7)
+diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
+index 896cb71a382c..1a1d58ebffbf 100644
+--- a/include/linux/platform_data/dma-dw.h
++++ b/include/linux/platform_data/dma-dw.h
+@@ -49,6 +49,7 @@ struct dw_dma_slave {
+ * @data_width: Maximum data width supported by hardware per AHB master
+ * (in bytes, power of 2)
+ * @multi_block: Multi block transfers supported by hardware per channel.
++ * @protctl: Protection control signals setting per channel.
+ */
+ struct dw_dma_platform_data {
+ unsigned int nr_channels;
+@@ -65,6 +66,11 @@ struct dw_dma_platform_data {
+ unsigned char nr_masters;
+ unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
+ unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS];
++#define CHAN_PROTCTL_PRIVILEGED BIT(0)
++#define CHAN_PROTCTL_BUFFERABLE BIT(1)
++#define CHAN_PROTCTL_CACHEABLE BIT(2)
++#define CHAN_PROTCTL_MASK GENMASK(2, 0)
++ unsigned char protctl;
+ };
+
+ #endif /* _PLATFORM_DATA_DMA_DW_H */
+diff --git a/include/dt-bindings/dma/dw-dmac.h b/include/dt-bindings/dma/dw-dmac.h
+new file mode 100644
+index 000000000000..d1ca705c95b3
+--- /dev/null
++++ b/include/dt-bindings/dma/dw-dmac.h
+@@ -0,0 +1,14 @@
++/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
++
++#ifndef __DT_BINDINGS_DMA_DW_DMAC_H__
++#define __DT_BINDINGS_DMA_DW_DMAC_H__
++
++/*
++ * Protection Control bits provide protection against illegal transactions.
++ * The protection bits[0:2] are one-to-one mapped to AHB HPROT[3:1] signals.
++ */
++#define DW_DMAC_HPROT1_PRIVILEGED_MODE (1 << 0) /* Privileged Mode */
++#define DW_DMAC_HPROT2_BUFFERABLE (1 << 1) /* DMA is bufferable */
++#define DW_DMAC_HPROT3_CACHEABLE (1 << 2) /* DMA is cacheable */
++
++#endif /* __DT_BINDINGS_DMA_DW_DMAC_H__ */
+--
+cgit 1.2-0.3.lf.el7
+
diff --git a/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch b/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 0000000000..5a05c6095e
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,169 @@
+From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 30/36] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib.c | 11 +++++--
+ include/asm-generic/gpio.h | 5 +++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 90 insertions(+), 2 deletions(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ #include "gpiolib.h"
+
+@@ -654,3 +656,72 @@ void of_gpiochip_remove(struct gpio_chip
+ gpiochip_remove_pin_ranges(chip);
+ of_node_put(chip->of_node);
+ }
++
++#ifdef CONFIG_GPIO_SYSFS
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++ if (!gpio_is_valid(gpio))
++ return gpio;
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++ .probe = of_gpio_export_probe,
++};
++
++module_platform_driver(gpio_export_driver);
++
++#endif
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -531,6 +531,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -538,6 +539,13 @@ void gpiod_unexport(struct gpio_desc *de
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -568,7 +568,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
+@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -651,6 +653,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
new file mode 100644
index 0000000000..18982392d4
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -144,6 +144,17 @@ config CANYONLANDS
+ help
+ This option enables support for the AMCC PPC460EX evaluation board.
+
++config APOLLO3G
++ bool "Apollo3G"
++ depends on 44x
++ default n
++ select PPC44x_SIMPLE
++ select APM821xx
++ select IBM_EMAC_RGMII
++ select 460EX
++ help
++ This option enables support for the AMCC Apollo 3G board.
++
+ config GLACIER
+ bool "Glacier"
+ depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
+ * board.c file for it rather than adding it to this list.
+ */
+ static char *board[] __initdata = {
++ "amcc,apollo3g",
+ "amcc,arches",
+ "amcc,bamboo",
+ "apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
new file mode 100644
index 0000000000..77294a8cbd
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Makefile
++++ b/arch/powerpc/platforms/44x/Makefile
+@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
+ obj-y += idle.o
+ endif
+ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
++obj-$(CONFIG_WNDR4700) += wndr4700.o
+ obj-$(CONFIG_EBONY) += ebony.o
+ obj-$(CONFIG_SAM440EP) += sam440ep.o
+ obj-$(CONFIG_WARP) += warp.o
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -273,6 +273,19 @@ config ICON
+ help
+ This option enables support for the AMCC PPC440SPe evaluation board.
+
++config WNDR4700
++ bool "WNDR4700"
++ depends on 44x
++ default n
++ select APM821xx
++ select PCI_MSI
++ select PPC4xx_MSI
++ select PPC4xx_PCI_EXPRESS
++ select IBM_EMAC_RGMII
++ select 460EX
++ help
++ This option enables support for the Netgear WNDR4700/WNDR4720 board.
++
+ config XILINX_VIRTEX440_GENERIC_BOARD
+ bool "Generic Xilinx Virtex 5 FXT board support"
+ depends on 44x
diff --git a/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
new file mode 100644
index 0000000000..110726d258
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
@@ -0,0 +1,51 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
+ u32 val;
+
+ /*
+- * Do a software reset on PCIe ports.
+- * This code is to fix the issue that pci drivers doesn't re-assign
+- * bus number for PCIE devices after Uboot
+- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+- * PT quad port, SAS LSI 1064E)
++ * Only reset the PHY when no link is currently established.
++ * This is for the Atheros PCIe board which has problems to establish
++ * the link (again) after this PHY reset. All other currently tested
++ * PCIe boards don't show this problem.
+ */
+-
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+- mdelay(10);
++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++ if (!(val & 0x00001000)) {
++ /*
++ * Do a software reset on PCIe ports.
++ * This code is to fix the issue that pci drivers doesn't re-assign
++ * bus number for PCIE devices after Uboot
++ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
++ * PT quad port, SAS LSI 1064E)
++ */
++
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
++ mdelay(10);
++ }
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+- mdelay(50);
+- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
++ if (!(val & 0x00001000)) {
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
++ mdelay(50);
++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
++ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
new file mode 100644
index 0000000000..6eb04b2c25
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
@@ -0,0 +1,14 @@
+--- a/arch/powerpc/platforms/4xx/pci.c
++++ b/arch/powerpc/platforms/4xx/pci.c
+@@ -1905,9 +1905,9 @@ static void __init ppc4xx_configure_pcie
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
diff --git a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
new file mode 100644
index 0000000000..b892674c66
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
@@ -0,0 +1,545 @@
+From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 2 Jun 2016 00:48:46 +0200
+Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
+ w/o ROM
+
+This patch adds a firmware loader for the uPD720201K8-711-BAC-A
+and uPD720202K8-711-BAA-A variant. Both of these chips are listed
+in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
+devices which need the firmware loader on page 2 in order to
+work as they "do not support the External ROM".
+
+The "Firmware Download Sequence" is describe in chapter
+"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
+
+The firmware "K2013080.mem" is available from a USB3.0 Host to
+PCIe Adapter (PP2U-E card) "Firmware download" archive. An
+alternative version can be sourced from Netgear's WNDR4700 GPL
+archives.
+
+The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
+(2012-06-15) state that the firmware is for the following devices:
+ - uPD720201 ES 2.0 sample whose revision ID is 2.
+ - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+ - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+
+If someone from Renesas is listening: It would be great, if these
+firmwares could be added to linux-firmware.git.
+
+Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+ drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 492 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -12,6 +12,8 @@
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/acpi.h>
++#include <linux/firmware.h>
++#include <asm/unaligned.h>
+
+ #include "xhci.h"
+ #include "xhci-trace.h"
+@@ -248,6 +250,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+ #endif /* CONFIG_ACPI */
+
++static const struct renesas_fw_entry {
++ const char *firmware_name;
++ u16 device;
++ u8 revision;
++ u16 expected_version;
++} renesas_fw_table[] = {
++ /*
++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
++ * need the software loader.
++ *
++ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
++ *
++ * Note: This firmware is for the following devices.
++ * - uPD720201 ES 2.0 sample whose revision ID is 2.
++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
++ */
++ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
++ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
++ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
++};
++
++static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
++{
++ const struct renesas_fw_entry *entry;
++ size_t i;
++
++ /* This loader will only work with a RENESAS device. */
++ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
++ return NULL;
++
++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++ entry = &renesas_fw_table[i];
++ if (entry->device == dev->device &&
++ entry->revision == dev->revision)
++ return entry;
++ }
++
++ return NULL;
++}
++
++static int renesas_fw_download_image(struct pci_dev *dev,
++ const u32 *fw,
++ size_t step)
++{
++ size_t i;
++ int err;
++ u8 fw_status;
++ bool data0_or_data1;
++
++ /*
++ * The hardware does alternate between two 32-bit pages.
++ * (This is because each row of the firmware is 8 bytes).
++ *
++ * for even steps we use DATA0, for odd steps DATA1.
++ */
++ data0_or_data1 = (step & 1) == 1;
++
++ /* step+1. Read "Set DATAX" and confirm it is cleared. */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(dev, 0xF5, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & BIT(data0_or_data1)))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000)
++ return -ETIMEDOUT;
++
++ /*
++ * step+2. Write FW data to "DATAX".
++ * "LSB is left" => force little endian
++ */
++ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
++ (__force u32) cpu_to_le32(fw[step]));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ udelay(100);
++
++ /* step+3. Set "Set DATAX". */
++ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ return 0;
++}
++
++static int renesas_fw_verify(struct pci_dev *dev,
++ const void *fw_data,
++ size_t length)
++{
++ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
++ u16 fw_version_pointer;
++ u16 fw_version;
++
++ if (!entry)
++ return -EINVAL;
++
++ /*
++ * The Firmware's Data Format is describe in
++ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
++ */
++
++ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
++ if (length % 8 != 0) {
++ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
++ return -EINVAL;
++ }
++
++ /*
++ * The bootrom chips of the big brother have sizes up to 64k, let's
++ * assume that's the biggest the firmware can get.
++ */
++ if (length < 0x1000 || length >= 0x10000) {
++ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
++ length);
++ return -EINVAL;
++ }
++
++ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
++ if (get_unaligned_le16(fw_data) != 0x55aa) {
++ dev_err(&dev->dev, "no valid firmware header found.");
++ return -EINVAL;
++ }
++
++ /* verify the firmware version position and print it. */
++ fw_version_pointer = get_unaligned_le16(fw_data + 4);
++ if (fw_version_pointer + 2 >= length) {
++ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
++ return -EINVAL;
++ }
++
++ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
++ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
++
++ if (fw_version != entry->expected_version) {
++ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
++ entry->expected_version);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int renesas_fw_check_running(struct pci_dev *pdev)
++{
++ int err;
++ u8 fw_state;
++
++ /*
++ * Test if the device is actually needing the firmware. As most
++ * BIOSes will initialize the device for us. If the device is
++ * initialized.
++ */
++ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /*
++ * Check if "FW Download Lock" is locked. If it is and the FW is
++ * ready we can simply continue. If the FW is not ready, we have
++ * to give up.
++ */
++ if (fw_state & BIT(1)) {
++ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
++
++ if (fw_state & BIT(4))
++ return 0;
++
++ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
++ return -EIO;
++ }
++
++ /*
++ * Check if "FW Download Enable" is set. If someone (us?) tampered
++ * with it and it can't be resetted, we have to give up too... and
++ * ask for a forgiveness and a reboot.
++ */
++ if (fw_state & BIT(0)) {
++ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
++ return -EIO;
++ }
++
++ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
++ switch ((fw_state & 0x70)) {
++ case 0: /* No result yet */
++ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
++
++ /* tell the caller, that this device needs the firmware. */
++ return 1;
++
++ case BIT(4): /* Success, device should be working. */
++ dev_dbg(&pdev->dev, "FW is ready.");
++ return 0;
++
++ case BIT(5): /* Error State */
++ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
++ return -ENODEV;
++
++ default: /* All other states are marked as "Reserved states" */
++ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
++ (fw_state & 0x70) >> 4);
++ return -EINVAL;
++ }
++}
++
++static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
++{
++#if 0
++ u32 val;
++
++ /*
++ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
++ * 'RUN/STOP' of USBCMD Register is set"
++ */
++ val = readl(hcd->regs + 0x20);
++ if (val & BIT(0)) {
++ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
++ return -EBUSY;
++ }
++#endif
++ return 0;
++}
++
++static int renesas_fw_download(struct pci_dev *pdev,
++ const struct firmware *fw, unsigned int retry_counter)
++{
++ const u32 *fw_data = (const u32 *) fw->data;
++ size_t i;
++ int err;
++ u8 fw_status;
++
++ /*
++ * For more information and the big picture: please look at the
++ * "Firmware Download Sequence" in "7.1 FW Download Interface"
++ * of R19UH0078EJ0500 Rev.5.00 page 131
++ */
++ err = renesas_hw_check_run_stop_busy(pdev);
++ if (err)
++ return err;
++
++ /*
++ * 0. Set "FW Download Enable" bit in the
++ * "FW Download Control & Status Register" at 0xF4
++ */
++ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 1 - 10 follow one step after the other. */
++ for (i = 0; i < fw->size / 4; i++) {
++ err = renesas_fw_download_image(pdev, fw_data, i);
++ if (err) {
++ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
++ i, i * 4, err);
++ return err;
++ }
++ }
++
++ /*
++ * This sequence continues until the last data is written to
++ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
++ * is cleared by the hardware beforehand.
++ */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & (BIT(0) | BIT(1))))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000)
++ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
++
++ /*
++ * 11. After finishing writing the last data of FW, the
++ * System Software must clear "FW Download Enable"
++ */
++ err = pci_write_config_byte(pdev, 0xF4, 0);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 12. Read "Result Code" and confirm it is good. */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (fw_status & BIT(4))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000) {
++ /* Timed out / Error - let's see if we can fix this */
++ err = renesas_fw_check_running(pdev);
++ switch (err) {
++ case 0: /*
++ * we shouldn't end up here.
++ * maybe it took a little bit longer.
++ * But all should be well?
++ */
++ break;
++
++ case 1: /* (No result yet? - we can try to retry) */
++ if (retry_counter < 10) {
++ retry_counter++;
++ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
++ retry_counter);
++ return renesas_fw_download(pdev, fw,
++ retry_counter);
++ }
++ return -ETIMEDOUT;
++
++ default:
++ return err;
++ }
++ }
++ /*
++ * Optional last step: Engage Firmware Lock
++ *
++ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
++ * if (err)
++ * return pcibios_err_to_errno(err);
++ */
++
++ return 0;
++}
++
++struct renesas_fw_ctx {
++ struct pci_dev *pdev;
++ const struct pci_device_id *id;
++ bool resume;
++};
++
++static int xhci_pci_probe(struct pci_dev *pdev,
++ const struct pci_device_id *id);
++
++static void renesas_fw_callback(const struct firmware *fw,
++ void *context)
++{
++ struct renesas_fw_ctx *ctx = context;
++ struct pci_dev *pdev = ctx->pdev;
++ struct device *parent = pdev->dev.parent;
++ int err = -ENOENT;
++
++ if (fw) {
++ err = renesas_fw_verify(pdev, fw->data, fw->size);
++ if (!err) {
++ err = renesas_fw_download(pdev, fw, 0);
++ release_firmware(fw);
++ if (!err) {
++ if (ctx->resume)
++ return;
++
++ err = xhci_pci_probe(pdev, ctx->id);
++ if (!err) {
++ /* everything worked */
++ devm_kfree(&pdev->dev, ctx);
++ return;
++ }
++
++ /* in case of an error - fall through */
++ } else {
++ dev_err(&pdev->dev, "firmware failed to download (%d).",
++ err);
++ }
++ }
++ } else {
++ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
++ }
++
++ dev_info(&pdev->dev, "Unloading driver");
++
++ if (parent)
++ device_lock(parent);
++
++ device_release_driver(&pdev->dev);
++
++ if (parent)
++ device_unlock(parent);
++
++ pci_dev_put(pdev);
++}
++
++static int renesas_fw_alive_check(struct pci_dev *pdev)
++{
++ const struct renesas_fw_entry *entry;
++ int err;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ err = renesas_fw_check_running(pdev);
++ /* Also go ahead, if the firmware is running */
++ if (err == 0)
++ return 0;
++
++ /* At this point, we can be sure that the FW isn't ready. */
++ return err;
++}
++
++static int renesas_fw_download_to_hw(struct pci_dev *pdev,
++ const struct pci_device_id *id,
++ bool do_resume)
++{
++ const struct renesas_fw_entry *entry;
++ struct renesas_fw_ctx *ctx;
++ int err;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ err = renesas_fw_check_running(pdev);
++ /* Continue ahead, if the firmware is already running. */
++ if (err == 0)
++ return 0;
++
++ if (err != 1)
++ return err;
++
++ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
++ if (!ctx)
++ return -ENOMEM;
++ ctx->pdev = pdev;
++ ctx->resume = do_resume;
++ ctx->id = id;
++
++ pci_dev_get(pdev);
++ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
++ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
++ if (err) {
++ pci_dev_put(pdev);
++ return err;
++ }
++
++ /*
++ * The renesas_fw_callback() callback will continue the probe
++ * process, once it aquires the firmware.
++ */
++ return 1;
++}
++
+ /* called during probe() after chip reset completes */
+ static int xhci_pci_setup(struct usb_hcd *hcd)
+ {
+@@ -286,6 +740,22 @@ static int xhci_pci_probe(struct pci_dev
+ struct hc_driver *driver;
+ struct usb_hcd *hcd;
+
++ /*
++ * Check if this device is a RENESAS uPD720201/2 device.
++ * Otherwise, we can continue with xhci_pci_probe as usual.
++ */
++ retval = renesas_fw_download_to_hw(dev, id, false);
++ switch (retval) {
++ case 0:
++ break;
++
++ case 1: /* let it load the firmware and recontinue the probe. */
++ return 0;
++
++ default:
++ return retval;
++ };
++
+ driver = (struct hc_driver *)id->driver_data;
+
+ /* Prevent runtime suspending between USB-2 and USB-3 initialization */
+@@ -347,6 +817,16 @@ static void xhci_pci_remove(struct pci_d
+ {
+ struct xhci_hcd *xhci;
+
++ if (renesas_fw_alive_check(dev)) {
++ /*
++ * bail out early, if this was a renesas device w/o FW.
++ * Else we might hit the NMI watchdog in xhci_handsake
++ * during xhci_reset as part of the driver's unloading.
++ * which we forced in the renesas_fw_callback().
++ */
++ return;
++ }
++
+ xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ xhci->xhc_state |= XHCI_STATE_REMOVING;
+ if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
new file mode 100644
index 0000000000..2fba6dcca1
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
@@ -0,0 +1,53 @@
+From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 23 Jun 2016 20:28:20 +0200
+Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
+ uPD720202
+
+The APM82181 does not support MSI-X. When probed, it will
+produce a noisy warning.
+
+---
+ drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 362 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -206,6 +206,7 @@ static void xhci_pci_quirks(struct devic
+ pdev->device == 0x0015) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci->quirks |= XHCI_ZERO_64B_REGS;
++ xhci->quirks |= XHCI_FORCE_MSI;
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -424,10 +424,14 @@ static int xhci_try_enable_msi(struct us
+ free_irq(hcd->irq, hcd);
+ hcd->irq = 0;
+
+- ret = xhci_setup_msix(xhci);
+- if (ret)
+- /* fall back to msi*/
++ if (xhci->quirks & XHCI_FORCE_MSI) {
+ ret = xhci_setup_msi(xhci);
++ } else {
++ ret = xhci_setup_msix(xhci);
++ if (ret)
++ /* fall back to msi*/
++ ret = xhci_setup_msi(xhci);
++ }
+
+ if (!ret) {
+ hcd->msi_enabled = 1;
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1857,6 +1857,7 @@ struct xhci_hcd {
+ /* support xHCI 0.96 spec USB2 software LPM */
+ unsigned sw_lpm_support:1;
+ /* support xHCI 1.0 spec USB2 hardware LPM */
++#define XHCI_FORCE_MSI (1 << 24)
+ unsigned hw_lpm_support:1;
+ /* cached usb2 extened protocol capabilites */
+ u32 *ext_caps;
diff --git a/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
new file mode 100644
index 0000000000..f8b30ae1b3
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
@@ -0,0 +1,65 @@
+From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:27:15 +0100
+Subject: [PATCH 1/2] hwmon: tc654 add detection routine
+
+This patch adds a detection routine for the TC654/TC655
+chips. Both IDs are listed in the Datasheet.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -64,6 +64,11 @@ enum tc654_regs {
+ /* Register data is read (and cached) at most once per second. */
+ #define TC654_UPDATE_INTERVAL HZ
+
++/* Manufacturer and Version Identification Register Values */
++#define TC654_MFR_ID_MICROCHIP 0x84
++#define TC654_VER_ID 0x00
++#define TC655_VER_ID 0x01
++
+ struct tc654_data {
+ struct i2c_client *client;
+
+@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_
+ {}
+ };
+
++static int
++tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
++{
++ struct i2c_adapter *adapter = new_client->adapter;
++ int manufacturer, product;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
++ return -ENODEV;
++
++ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
++ if (manufacturer != TC654_MFR_ID_MICROCHIP)
++ return -ENODEV;
++
++ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
++ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
++ return -ENODEV;
++
++ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
++ I2C_NAME_SIZE);
++ return 0;
++}
++
++
+ MODULE_DEVICE_TABLE(i2c, tc654_id);
+
+ static struct i2c_driver tc654_driver = {
+@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver =
+ },
+ .probe = tc654_probe,
+ .id_table = tc654_id,
++ .detect = tc654_detect,
+ };
+
+ module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
new file mode 100644
index 0000000000..18ed8aecce
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
@@ -0,0 +1,174 @@
+From 15ae701189744d321d3a1264ff46f8871e8765ee Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 17 Dec 2017 17:29:13 +0100
+Subject: [PATCH] hwmon: tc654: add thermal_cooling device
+
+This patch adds a thermaL_cooling device to the tc654 driver.
+This allows the chip to be used for DT-based cooling.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++++++++---------
+ 1 file changed, 86 insertions(+), 17 deletions(-)
+
+--- a/drivers/hwmon/tc654.c
++++ b/drivers/hwmon/tc654.c
+@@ -24,6 +24,7 @@
+ #include <linux/module.h>
+ #include <linux/mutex.h>
+ #include <linux/slab.h>
++#include <linux/thermal.h>
+ #include <linux/util_macros.h>
+
+ enum tc654_regs {
+@@ -141,6 +142,9 @@ struct tc654_data {
+ * writable register used to control the duty
+ * cycle of the V OUT output.
+ */
++
++ /* optional cooling device */
++ struct thermal_cooling_device *cdev;
+ };
+
+ /* helper to grab and cache data, at most one time per second */
+@@ -376,36 +380,30 @@ static ssize_t set_pwm_mode(struct devic
+ static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
+ 172, 184, 196, 207, 219, 231, 243, 255};
+
++static int get_pwm(struct tc654_data *data)
++{
++ if (data->config & TC654_REG_CONFIG_SDM)
++ return 0;
++ else
++ return tc654_pwm_map[data->duty_cycle];
++}
++
+ static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
+ char *buf)
+ {
+ struct tc654_data *data = tc654_update_client(dev);
+- int pwm;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+- if (data->config & TC654_REG_CONFIG_SDM)
+- pwm = 0;
+- else
+- pwm = tc654_pwm_map[data->duty_cycle];
+-
+- return sprintf(buf, "%d\n", pwm);
++ return sprintf(buf, "%d\n", get_pwm(data));
+ }
+
+-static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
+- const char *buf, size_t count)
++static int _set_pwm(struct tc654_data *data, unsigned long val)
+ {
+- struct tc654_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+- unsigned long val;
+ int ret;
+
+- if (kstrtoul(buf, 10, &val))
+- return -EINVAL;
+- if (val > 255)
+- return -EINVAL;
+-
+ mutex_lock(&data->update_lock);
+
+ if (val == 0)
+@@ -425,6 +423,22 @@ static ssize_t set_pwm(struct device *de
+
+ out:
+ mutex_unlock(&data->update_lock);
++ return ret;
++}
++
++static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
++ const char *buf, size_t count)
++{
++ struct tc654_data *data = dev_get_drvdata(dev);
++ unsigned long val;
++ int ret;
++
++ if (kstrtoul(buf, 10, &val))
++ return -EINVAL;
++ if (val > 255)
++ return -EINVAL;
++
++ ret = _set_pwm(data, val);
+ return ret < 0 ? ret : count;
+ }
+
+@@ -462,6 +476,47 @@ static struct attribute *tc654_attrs[] =
+
+ ATTRIBUTE_GROUPS(tc654);
+
++/* cooling device */
++
++static int tc654_get_max_state(struct thermal_cooling_device *cdev,
++ unsigned long *state)
++{
++ *state = 255;
++ return 0;
++}
++
++static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
++ unsigned long *state)
++{
++ struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++ if (IS_ERR(data))
++ return PTR_ERR(data);
++
++ *state = get_pwm(data);
++ return 0;
++}
++
++static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
++ unsigned long state)
++{
++ struct tc654_data *data = tc654_update_client(cdev->devdata);
++
++ if (IS_ERR(data))
++ return PTR_ERR(data);
++
++ if (state > 255)
++ return -EINVAL;
++
++ return _set_pwm(data, state);
++}
++
++static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
++ .get_max_state = tc654_get_max_state,
++ .get_cur_state = tc654_get_cur_state,
++ .set_cur_state = tc654_set_cur_state,
++};
++
+ /*
+ * device probe and removal
+ */
+@@ -493,7 +548,21 @@ static int tc654_probe(struct i2c_client
+ hwmon_dev =
+ devm_hwmon_device_register_with_groups(dev, client->name, data,
+ tc654_groups);
+- return PTR_ERR_OR_ZERO(hwmon_dev);
++ if (IS_ERR(hwmon_dev))
++ return PTR_ERR(hwmon_dev);
++
++#if IS_ENABLED(CONFIG_OF)
++ /* Optional cooling device register for Device tree platforms */
++ data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
++ "tc654", hwmon_dev,
++ &tc654_fan_cool_ops);
++#else /* CONFIG_OF */
++ /* Optional cooling device register for non Device tree platforms */
++ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
++ &tc654_fan_cool_ops);
++#endif /* CONFIG_OF */
++
++ return PTR_ERR_OR_ZERO(data->cdev);
+ }
+
+ static const struct i2c_device_id tc654_id[] = {
diff --git a/target/linux/apm821xx/sata/config-default b/target/linux/apm821xx/sata/config-default
index 5af8c338f5..a93466a52e 100644
--- a/target/linux/apm821xx/sata/config-default
+++ b/target/linux/apm821xx/sata/config-default
@@ -1,4 +1,3 @@
-# CONFIG_IKAREM is not set
CONFIG_APOLLO3G=y
CONFIG_BROADCOM_PHY=y
CONFIG_EXT4_FS=y