diff options
| author | David Bauer <mail@david-bauer.net> | 2019-02-01 20:48:41 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-02-11 19:04:06 +0100 |
| commit | 0c24b363a69d1445a280e41e5c33675be95295d1 (patch) | |
| tree | 16756d1854fc028e917a1634066ce030b8d76d0a /target/linux/apm821xx/patches-4.14/140-GPIO-add-named-gpio-exports.patch | |
| parent | 4130e24326d6a7bea6f786589baf65dc992c97a5 (diff) | |
| download | upstream-0c24b363a69d1445a280e41e5c33675be95295d1.tar.gz upstream-0c24b363a69d1445a280e41e5c33675be95295d1.tar.bz2 upstream-0c24b363a69d1445a280e41e5c33675be95295d1.zip | |
ath79: add support for Xiaomi Mi Router 4Q
Hardware
--------
CPU: Qualcomm Atheros QCA9561
RAM: 64M DDR2
FLASH: 16M SPI-NOR
ETH: 1x WAN - 2x LAN
WiFi: QCA9561 3T3R
BTN: 1x Reset - 1x WPS
LED: 1x Blue - 1x Red - 1x Yellow
UART: TX - GND - RX - VCC (From ethernet port)
115200n8 - 3.3V
Installation
------------
1. Connect to the device via UART.
2. Interrupt the U-Boot on power-on by pressing enter when prompted.
3. Connect you computer to one of the routers LAN ports.
Assign yourself the IP 192.168.31.10/24.
Copy the OpenWRT initramfs image to a tftp server root directory.
Rename the image to 'x4q.bin'.
4. Load the initramfs image to the router by executing following command
in U-Boot. The image will boot afterwards.
> tftpboot 0x81000000 x4q.bin; bootm
5. SCP the sysupgrade-image into '/tmp'.
Remember to assign yourself an IP in 192.168.1.0/24 for this step!
6. Install OpenWRT permanently by executing
> sysupgrade -n /tmp/<OpenWRT-sysupgrade-image>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/apm821xx/patches-4.14/140-GPIO-add-named-gpio-exports.patch')
0 files changed, 0 insertions, 0 deletions