diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-10-02 22:28:45 +0900 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-10-07 15:44:19 +0200 |
| commit | 6d1abbcab482556ad13cc7285680b97d4a28a465 (patch) | |
| tree | 29e6a577c6cb51bbf83c0b7b84466947df2c11b5 /target/linux/apm821xx/nand | |
| parent | d745eac636f017d8a6ac2091746c985fcd8d2851 (diff) | |
| download | upstream-6d1abbcab482556ad13cc7285680b97d4a28a465.tar.gz upstream-6d1abbcab482556ad13cc7285680b97d4a28a465.tar.bz2 upstream-6d1abbcab482556ad13cc7285680b97d4a28a465.zip | |
ath79: add support for Buffalo WZR-HP-G302H A1A0
Buffalo WZR-HP-G302H is a 2T2R 2.4 GHz 11n router, based on Atheros
AR7242.
It is Japanese market model of WZR-HP-G300NH2, but there are some
diffrences. This commit is based on WZR-HP-G300NH2 in ar71xx.
And, G302H has several hardware versions and hardware is different
dependent on the versions. This commit adds support for "A1A0"
version.
Specification:
- Atheros AR7242
- 64 MB of RAM (DDR2)
- 32 MB of Flash
- 2x 16 MB SPI-NOR flash
- 2.4 GHz 2T2R wifi
- Atheros AR9283
- 5x 10/100/1000 Mbps Ethernet
- Atheros AR8316
- 7x LEDs, 5x keys
- LED: 1x gpio-leds, 6x ath9k-leds
- key: 3x buttons, 2x slide switches
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- 115200n8
Flash instruction using factory image:
1. Boot WZR-HP-G302H normaly and connect the computer to its LAN port
2. Access to "http://192.168.11.1/" and move to firmware update page
("ファーム更新")
3. Select the OpenWrt factory image and click update ("更新実行")
button to perform firmware update
4. Wait ~200 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/apm821xx/nand')
0 files changed, 0 insertions, 0 deletions