diff options
author | Christian Lamparter <chunkeey@googlemail.com> | 2016-10-05 14:53:11 +0200 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2016-10-15 11:36:50 +0200 |
commit | 098f7156cc68d07a8eed9574c76b90c7ade77026 (patch) | |
tree | 57d71f1eef6e8fa33320a617dee42309ebbf41c3 /target/linux/adm8668 | |
parent | e9455c561d4af68840421e3d442e4ad5ebfbedc6 (diff) | |
download | upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.gz upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.tar.bz2 upstream-098f7156cc68d07a8eed9574c76b90c7ade77026.zip |
ar71xx: add support for the Airtight C-60
This patch adds support for the Airtight C-60.
SOC: Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM: 128 MiB
NOR: MX25L3205D 4MiB
NAND: ST Micro NAND 32MiB 3,3V 8-bit
SW-NET: AR8327N (2 Ports)
WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip
The switch is setup for an accesspoint:
LAN1: (gigabit) is the wan-port.
LAN2: (fast ethernet) is bridged with the br-lan.
Flashing Guide (via initramfs):
1. Connect a PC to the serial port of the C-60.
power up the C-60.
Enter u-boot command prompt:
#> nand erase
#> setenv bootcmd "bootm 0x9f060000"
#> saveenv
#> setenv ipaddr 192.168.1.1
#> setenv netmask 255.255.255.0
#> setenv serverip 192.168.1.100
#> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
#> tftpboot
#> bootm
2. Wait for the C-60 to boot LEDE.
On the root prompt. Enter:
# ubiformat /dev/mtd4
# ubiattach -p /dev/mtd4
3. After that copy the sysupgrade.tar onto the router and run:
# sysupgrade sysupgrade.tar
to flash the image.
Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/adm8668')
0 files changed, 0 insertions, 0 deletions