adm8668: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 452 deletions

diff --git a/target/linux/adm8668/patches-3.18/004-tulip_pci_split.patch b/target/linux/adm8668/patches-3.18/004-tulip_pci_split.patch
deleted file mode 100644
index e39a1686ce..0000000000
--- a/target/linux/adm8668/patches-3.18/004-tulip_pci_split.patch
+++ /dev/null
@@ -1,452 +0,0 @@
---- a/drivers/net/ethernet/dec/tulip/tulip_core.c
-+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
-@@ -206,6 +206,7 @@ struct tulip_chip_table tulip_tbl[] = {
- };
- 
- 
-+#ifdef CONFIG_TULIP_PCI
- static const struct pci_device_id tulip_pci_tbl[] = {
- 	{ 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
- 	{ 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
-@@ -249,7 +250,7 @@ static const struct pci_device_id tulip_
- 	{ } /* terminate list */
- };
- MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);
--
-+#endif
- 
- /* A full-duplex map for media types. */
- const char tulip_media_cap[32] =
-@@ -267,11 +268,14 @@ static void tulip_down(struct net_device
- static struct net_device_stats *tulip_get_stats(struct net_device *dev);
- static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
- static void set_rx_mode(struct net_device *dev);
-+#ifdef CONFIG_TULIP_PCI
- static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts);
-+#endif
- #ifdef CONFIG_NET_POLL_CONTROLLER
- static void poll_tulip(struct net_device *dev);
- #endif
- 
-+#ifdef CONFIG_TULIP_PCI
- static void tulip_set_power_state (struct tulip_private *tp,
- 				   int sleep, int snooze)
- {
-@@ -288,7 +292,7 @@ static void tulip_set_power_state (struc
- 	}
- 
- }
--
-+#endif
- 
- static void tulip_up(struct net_device *dev)
- {
-@@ -302,6 +306,7 @@ static void tulip_up(struct net_device *
- 	napi_enable(&tp->napi);
- #endif
- 
-+#ifdef CONFIG_TULIP_PCI
- 	/* Wake the chip from sleep/snooze mode. */
- 	tulip_set_power_state (tp, 0, 0);
- 
-@@ -309,6 +314,7 @@ static void tulip_up(struct net_device *
- 	pci_enable_wake(tp->pdev, PCI_D3hot, 0);
- 	pci_enable_wake(tp->pdev, PCI_D3cold, 0);
- 	tulip_set_wolopts(tp->pdev, 0);
-+#endif
- 
- 	/* On some chip revs we must set the MII/SYM port before the reset!? */
- 	if (tp->mii_cnt  ||  (tp->mtable  &&  tp->mtable->has_mii))
-@@ -316,18 +322,22 @@ static void tulip_up(struct net_device *
- 
- 	/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
- 	iowrite32(0x00000001, ioaddr + CSR0);
-+#ifdef CONFIG_TULIP_PCI
- 	pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg);  /* flush write */
-+#endif
- 	udelay(100);
- 
- 	/* Deassert reset.
- 	   Wait the specified 50 PCI cycles after a reset by initializing
- 	   Tx and Rx queues and the address filter list. */
- 	iowrite32(tp->csr0, ioaddr + CSR0);
-+#ifdef CONFIG_TULIP_PCI
- 	pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg);  /* flush write */
-+#endif
- 	udelay(100);
- 
- 	if (tulip_debug > 1)
--		netdev_dbg(dev, "tulip_up(), irq==%d\n", tp->pdev->irq);
-+		netdev_dbg(dev, "tulip_up(), irq==%d\n", tp->irq);
- 
- 	iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
- 	iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
-@@ -361,9 +371,11 @@ static void tulip_up(struct net_device *
- 		*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
- 		*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
- 
-+#ifdef CONFIG_TULIP_PCI
- 		mapping = pci_map_single(tp->pdev, tp->setup_frame,
- 					 sizeof(tp->setup_frame),
- 					 PCI_DMA_TODEVICE);
-+#endif
- 		tp->tx_buffers[tp->cur_tx].skb = NULL;
- 		tp->tx_buffers[tp->cur_tx].mapping = mapping;
- 
-@@ -519,7 +531,7 @@ tulip_open(struct net_device *dev)
- 
- 	tulip_init_ring (dev);
- 
--	retval = request_irq(tp->pdev->irq, tulip_interrupt, IRQF_SHARED,
-+	retval = request_irq(tp->irq, tulip_interrupt, IRQF_SHARED,
- 			     dev->name, dev);
- 	if (retval)
- 		goto free_ring;
-@@ -643,8 +655,10 @@ static void tulip_init_ring(struct net_d
- 		tp->rx_buffers[i].skb = skb;
- 		if (skb == NULL)
- 			break;
-+#ifdef CONFIG_TULIP_PCI
- 		mapping = pci_map_single(tp->pdev, skb->data,
- 					 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
-+#endif
- 		tp->rx_buffers[i].mapping = mapping;
- 		tp->rx_ring[i].status = cpu_to_le32(DescOwned);	/* Owned by Tulip chip */
- 		tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
-@@ -677,8 +691,10 @@ tulip_start_xmit(struct sk_buff *skb, st
- 	entry = tp->cur_tx % TX_RING_SIZE;
- 
- 	tp->tx_buffers[entry].skb = skb;
-+#ifdef CONFIG_TULIP_PCI
- 	mapping = pci_map_single(tp->pdev, skb->data,
- 				 skb->len, PCI_DMA_TODEVICE);
-+#endif
- 	tp->tx_buffers[entry].mapping = mapping;
- 	tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
- 
-@@ -729,16 +745,19 @@ static void tulip_clean_tx_ring(struct t
- 		if (tp->tx_buffers[entry].skb == NULL) {
- 			/* test because dummy frames not mapped */
- 			if (tp->tx_buffers[entry].mapping)
-+#ifdef CONFIG_TULIP_PCI
- 				pci_unmap_single(tp->pdev,
- 					tp->tx_buffers[entry].mapping,
- 					sizeof(tp->setup_frame),
- 					PCI_DMA_TODEVICE);
-+#endif
- 			continue;
- 		}
--
-+#ifdef CONFIG_TULIP_PCI
- 		pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
- 				tp->tx_buffers[entry].skb->len,
- 				PCI_DMA_TODEVICE);
-+#endif
- 
- 		/* Free the original skb. */
- 		dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
-@@ -789,7 +808,9 @@ static void tulip_down (struct net_devic
- 	dev->if_port = tp->saved_if_port;
- 
- 	/* Leave the driver in snooze, not sleep, mode. */
-+#ifdef CONFIG_TULIP_PCI
- 	tulip_set_power_state (tp, 0, 1);
-+#endif
- }
- 
- static void tulip_free_ring (struct net_device *dev)
-@@ -810,8 +831,10 @@ static void tulip_free_ring (struct net_
- 		/* An invalid address. */
- 		tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
- 		if (skb) {
-+#ifdef CONFIG_TULIP_PCI
- 			pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
- 					 PCI_DMA_FROMDEVICE);
-+#endif
- 			dev_kfree_skb (skb);
- 		}
- 	}
-@@ -820,8 +843,10 @@ static void tulip_free_ring (struct net_
- 		struct sk_buff *skb = tp->tx_buffers[i].skb;
- 
- 		if (skb != NULL) {
-+#ifdef CONFIG_TULIP_PCI
- 			pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
- 					 skb->len, PCI_DMA_TODEVICE);
-+#endif
- 			dev_kfree_skb (skb);
- 		}
- 		tp->tx_buffers[i].skb = NULL;
-@@ -842,7 +867,7 @@ static int tulip_close (struct net_devic
- 		netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
- 			   ioread32 (ioaddr + CSR5));
- 
--	free_irq (tp->pdev->irq, dev);
-+	free_irq (tp->irq, dev);
- 
- 	tulip_free_ring (dev);
- 
-@@ -873,7 +898,9 @@ static void tulip_get_drvinfo(struct net
- 	struct tulip_private *np = netdev_priv(dev);
- 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-+#ifdef CONFIG_TULIP_PCI
- 	strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
-+#endif
- }
- 
- 
-@@ -886,7 +913,9 @@ static int tulip_ethtool_set_wol(struct
- 		   return -EOPNOTSUPP;
- 
- 	tp->wolinfo.wolopts = wolinfo->wolopts;
--	device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts);
-+#ifdef CONFIG_TULIP_PCI
-+	device_set_wakeup_enable(tp->kdev, tp->wolinfo.wolopts);
-+#endif
- 	return 0;
- }
- 
-@@ -1164,9 +1193,11 @@ static void set_rx_mode(struct net_devic
- 
- 			tp->tx_buffers[entry].skb = NULL;
- 			tp->tx_buffers[entry].mapping =
-+#ifdef CONFIG_TULIP_PCI
- 				pci_map_single(tp->pdev, tp->setup_frame,
- 					       sizeof(tp->setup_frame),
- 					       PCI_DMA_TODEVICE);
-+#endif
- 			/* Put the setup frame on the Tx list. */
- 			if (entry == TX_RING_SIZE-1)
- 				tx_flags |= DESC_RING_WRAP;		/* Wrap ring. */
-@@ -1263,19 +1294,22 @@ out:
- 		netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n",
- 			   cache, csr0);
- }
--#endif
- 
- /*
-  *	Chips that have the MRM/reserved bit quirk and the burst quirk. That
-  *	is the DM910X and the on chip ULi devices
-  */
-+#endif
- 
-+#ifdef CONFIG_TULIP_PCI
- static int tulip_uli_dm_quirk(struct pci_dev *pdev)
- {
- 	if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
- 		return 1;
- 	return 0;
- }
-+#endif
-+
- 
- static const struct net_device_ops tulip_netdev_ops = {
- 	.ndo_open		= tulip_open,
-@@ -1293,6 +1327,7 @@ static const struct net_device_ops tulip
- #endif
- };
- 
-+#ifdef CONFIG_TULIP_PCI
- const struct pci_device_id early_486_chipsets[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
-@@ -1470,6 +1505,8 @@ static int tulip_init_one(struct pci_dev
- 		}
- 	}
- 	tp->pdev = pdev;
-+	tp->kdev = &pdev->dev;
-+	tp->irq = irq;
- 	tp->base_addr = ioaddr;
- 	tp->revision = pdev->revision;
- 	tp->csr0 = csr0;
-@@ -1800,6 +1837,7 @@ err_out_free_netdev:
- }
- 
- 
-+#ifdef CONFIG_TULIP_PCI
- /* set the registers according to the given wolopts */
- static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts)
- {
-@@ -1828,6 +1866,7 @@ static void tulip_set_wolopts (struct pc
- 		iowrite32(tmp, ioaddr + CSR13);
- 	}
- }
-+#endif
- 
- #ifdef CONFIG_PM
- 
-@@ -1942,6 +1981,7 @@ static void tulip_remove_one(struct pci_
- 
- 	/* pci_power_off (pdev, -1); */
- }
-+#endif /* CONFIG_TULIP_PCI */
- 
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
-@@ -1963,7 +2003,8 @@ static void poll_tulip (struct net_devic
- }
- #endif
- 
--static struct pci_driver tulip_driver = {
-+#ifdef CONFIG_TULIP_PCI
-+static struct pci_driver tulip_pci_driver = {
- 	.name		= DRV_NAME,
- 	.id_table	= tulip_pci_tbl,
- 	.probe		= tulip_init_one,
-@@ -1973,10 +2014,12 @@ static struct pci_driver tulip_driver =
- 	.resume		= tulip_resume,
- #endif /* CONFIG_PM */
- };
-+#endif
- 
- 
- static int __init tulip_init (void)
- {
-+	int ret = 0;
- #ifdef MODULE
- 	pr_info("%s", version);
- #endif
-@@ -1992,13 +2035,18 @@ static int __init tulip_init (void)
- 	tulip_max_interrupt_work = max_interrupt_work;
- 
- 	/* probe for and init boards */
--	return pci_register_driver(&tulip_driver);
-+#ifdef CONFIG_TULIP_PCI
-+	ret = pci_register_driver(&tulip_pci_driver);
-+#endif
-+	return ret;
- }
- 
- 
- static void __exit tulip_cleanup (void)
- {
--	pci_unregister_driver (&tulip_driver);
-+#ifdef CONFIG_TULIP_PCI
-+	pci_unregister_driver (&tulip_pci_driver);
-+#endif
- }
- 
- 
---- a/drivers/net/ethernet/dec/tulip/interrupt.c
-+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
-@@ -73,10 +73,11 @@ int tulip_refill_rx(struct net_device *d
- 				netdev_alloc_skb(dev, PKT_BUF_SZ);
- 			if (skb == NULL)
- 				break;
--
-+#ifdef CONFIG_TULIP_PCI
- 			mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
- 						 PCI_DMA_FROMDEVICE);
--			if (dma_mapping_error(&tp->pdev->dev, mapping)) {
-+#endif
-+			if (dma_mapping_error(tp->kdev, mapping)) {
- 				dev_kfree_skb(skb);
- 				tp->rx_buffers[entry].skb = NULL;
- 				break;
-@@ -210,9 +211,11 @@ int tulip_poll(struct napi_struct *napi,
-                                if (pkt_len < tulip_rx_copybreak &&
-                                    (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
-                                        skb_reserve(skb, 2);    /* 16 byte align the IP header */
-+#ifdef CONFIG_TULIP_PCI
-                                        pci_dma_sync_single_for_cpu(tp->pdev,
- 								   tp->rx_buffers[entry].mapping,
- 								   pkt_len, PCI_DMA_FROMDEVICE);
-+#endif
- #if ! defined(__alpha__)
-                                        skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
-                                                         pkt_len);
-@@ -222,9 +225,11 @@ int tulip_poll(struct napi_struct *napi,
-                                               tp->rx_buffers[entry].skb->data,
-                                               pkt_len);
- #endif
-+#ifdef CONFIG_TULIP_PCI
-                                        pci_dma_sync_single_for_device(tp->pdev,
- 								      tp->rx_buffers[entry].mapping,
- 								      pkt_len, PCI_DMA_FROMDEVICE);
-+#endif
-                                } else {        /* Pass up the skb already on the Rx ring. */
-                                        char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
-                                                             pkt_len);
-@@ -239,9 +244,10 @@ int tulip_poll(struct napi_struct *napi,
- 						       skb->head, temp);
-                                        }
- #endif
--
-+#ifdef CONFIG_TULIP_PCI
-                                        pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
-                                                         PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
-+#endif
- 
-                                        tp->rx_buffers[entry].skb = NULL;
-                                        tp->rx_buffers[entry].mapping = 0;
-@@ -597,10 +603,12 @@ irqreturn_t tulip_interrupt(int irq, voi
- 				if (tp->tx_buffers[entry].skb == NULL) {
- 					/* test because dummy frames not mapped */
- 					if (tp->tx_buffers[entry].mapping)
-+#ifdef CONFIG_TULIP_PCI
- 						pci_unmap_single(tp->pdev,
- 							 tp->tx_buffers[entry].mapping,
- 							 sizeof(tp->setup_frame),
- 							 PCI_DMA_TODEVICE);
-+#endif
- 					continue;
- 				}
- 
-@@ -628,10 +636,11 @@ irqreturn_t tulip_interrupt(int irq, voi
- 					dev->stats.collisions += (status >> 3) & 15;
- 					dev->stats.tx_packets++;
- 				}
--
-+#ifdef CONFIG_TULIP_PCI
- 				pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
- 						 tp->tx_buffers[entry].skb->len,
- 						 PCI_DMA_TODEVICE);
-+#endif
- 
- 				/* Free the original skb. */
- 				dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
---- a/drivers/net/ethernet/dec/tulip/Kconfig
-+++ b/drivers/net/ethernet/dec/tulip/Kconfig
-@@ -40,8 +40,12 @@ config DE2104X_DSL
- 	  Default is 0, and range is 0 to 31.
- 
- config TULIP
-+	tristate
-+
-+config TULIP_PCI
- 	tristate "DECchip Tulip (dc2114x) PCI support"
- 	depends on PCI
-+	select TULIP
- 	select CRC32
- 	---help---
- 	  This driver is developed for the SMC EtherPower series Ethernet
-@@ -58,7 +62,7 @@ config TULIP
- 
- config TULIP_MWI
- 	bool "New bus configuration"
--	depends on TULIP
-+	depends on TULIP_PCI
- 	---help---
- 	  This configures your Tulip card specifically for the card and
- 	  system cache line size type you are using.
-@@ -69,7 +73,7 @@ config TULIP_MWI
- 
- config TULIP_MMIO
- 	bool "Use PCI shared mem for NIC registers"
--	depends on TULIP
-+	depends on TULIP_PCI
- 	---help---
- 	  Use PCI shared memory for the NIC registers, rather than going through
- 	  the Tulip's PIO (programmed I/O ports).  Faster, but could produce
---- a/drivers/net/ethernet/dec/tulip/tulip.h
-+++ b/drivers/net/ethernet/dec/tulip/tulip.h
-@@ -447,6 +447,8 @@ struct tulip_private {
- 	int cur_index;		/* Current media index. */
- 	int saved_if_port;
- 	struct pci_dev *pdev;
-+	struct device *kdev;
-+	int irq;
- 	int ttimer;
- 	int susp_rx;
- 	unsigned long nir;