aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm8668/files
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2012-12-06 22:39:43 +0000
committerFlorian Fainelli <florian@openwrt.org>2012-12-06 22:39:43 +0000
commitafc2b07be18f32327351c73d1e58f8e27fdc29bd (patch)
treefeb35c59476836dbf48640992af895299ccbb89c /target/linux/adm8668/files
parent2dee2133c5d6a3aa87b341c09c8978dd771edb94 (diff)
downloadupstream-afc2b07be18f32327351c73d1e58f8e27fdc29bd.tar.gz
upstream-afc2b07be18f32327351c73d1e58f8e27fdc29bd.tar.bz2
upstream-afc2b07be18f32327351c73d1e58f8e27fdc29bd.zip
get rid of the specific UART driver and use AMBA PL010
Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34548
Diffstat (limited to 'target/linux/adm8668/files')
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/Kconfig2
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/Makefile4
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/clock.c56
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/platform.c43
-rw-r--r--target/linux/adm8668/files/arch/mips/adm8668/serial.c638
-rw-r--r--target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/asm/sizes.h56
6 files changed, 146 insertions, 653 deletions
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/Kconfig b/target/linux/adm8668/files/arch/mips/adm8668/Kconfig
new file mode 100644
index 0000000000..2e7281ff0a
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/Kconfig
@@ -0,0 +1,2 @@
+config ARM_AMBA
+ def_bool y
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/Makefile b/target/linux/adm8668/files/arch/mips/adm8668/Makefile
index dbd3f12d11..ed45666194 100644
--- a/target/linux/adm8668/files/arch/mips/adm8668/Makefile
+++ b/target/linux/adm8668/files/arch/mips/adm8668/Makefile
@@ -2,6 +2,6 @@
# something witty --neutronscott
#
-obj-y := irq.o pci.o prom.o platform.o serial.o proc.o \
- setup.o time.o early_printk.o \
+obj-y := irq.o pci.o prom.o platform.o proc.o \
+ setup.o time.o early_printk.o clock.o \
net_core.o net_intr.o
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/clock.c b/target/linux/adm8668/files/arch/mips/adm8668/clock.c
new file mode 100644
index 0000000000..96d139e177
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/adm8668/clock.c
@@ -0,0 +1,56 @@
+/*
+ * ADM8668 minimal clock support
+ *
+ * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
+ *
+ * Licensed under the terms of the GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <adm8668.h>
+
+struct clk {
+ unsigned long rate;
+};
+
+static struct clk uart_clk = {
+ .rate = ADM8668_UARTCLK_FREQ,
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ const char *name = dev_name(dev);
+
+ if (!strcmp(name, "apb:uart0"))
+ return &uart_clk;
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/platform.c b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
index 4c158dd749..5030565a2c 100644
--- a/target/linux/adm8668/files/arch/mips/adm8668/platform.c
+++ b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
+ * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,9 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/addrspace.h>
@@ -20,23 +24,31 @@
#include <asm/io.h>
#include <adm8668.h>
-static struct resource uart_resources[] = {
- {
+static void adm8668_uart_set_mctrl(struct amba_device *dev,
+ void __iomem *base,
+ unsigned int mcrtl)
+{
+}
+
+static struct amba_pl010_data adm8668_uart0_data = {
+ .set_mctrl = adm8668_uart_set_mctrl,
+};
+
+static struct amba_device adm8668_uart0_device = {
+ .dev = {
+ .init_name = "apb:uart0",
+ .platform_data = &adm8668_uart0_data,
+ },
+ .res = {
.start = ADM8668_UART0_BASE,
.end = ADM8668_UART0_BASE + 0xF,
.flags = IORESOURCE_MEM,
},
- {
- .start = INT_LVL_UART0,
- .flags = IORESOURCE_IRQ,
+ .irq = {
+ INT_LVL_UART0,
+ -1
},
-};
-
-static struct platform_device adm8668_uart_device = {
- .name = "adm8668_uart",
- .id = 0,
- .resource = uart_resources,
- .num_resources = ARRAY_SIZE(uart_resources),
+ .periphid = 0x0041010,
};
static struct resource eth0_resources[] = {
@@ -78,13 +90,18 @@ static struct platform_device adm8668_eth1_device = {
};
static struct platform_device *adm8668_devs[] = {
- &adm8668_uart_device,
&adm8668_eth0_device,
&adm8668_eth1_device,
};
int __devinit adm8668_devs_register(void)
{
+ int ret;
+
+ ret = amba_device_register(&adm8668_uart0_device, &iomem_resource);
+ if (ret)
+ panic("failed to register AMBA UART");
+
return platform_add_devices(adm8668_devs, ARRAY_SIZE(adm8668_devs));
}
arch_initcall(adm8668_devs_register);
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/serial.c b/target/linux/adm8668/files/arch/mips/adm8668/serial.c
deleted file mode 100644
index 7d684b8102..0000000000
--- a/target/linux/adm8668/files/arch/mips/adm8668/serial.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * ADM8668 serial driver, totally ripped the source from BCM63xx and changed
- * all the registers to fit our hardware, and removed all the features that
- * I didn't know because our GPL'd serial driver was way lame.
- *
- * Copyright (C) 2010 Scott Nicholas <neutronscott@scottn.us>
- * Derived directly from bcm63xx_uart
- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
- *
- */
-
-#if defined(CONFIG_SERIAL_ADM8668_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/clk.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <adm8668.h>
-
-#define ADM8668_NR_UARTS 1
-
-static struct uart_port ports[ADM8668_NR_UARTS];
-
-/*
- * handy uart register accessor
- */
-static inline unsigned int adm_uart_readl(struct uart_port *port,
- unsigned int offset)
-{
- return (*(volatile unsigned int *)(port->membase + offset));
-}
-
-static inline void adm_uart_writel(struct uart_port *port,
- unsigned int value, unsigned int offset)
-{
- (*((volatile unsigned int *)(port->membase + offset))) = value;
-}
-
-/*
- * serial core request to check if uart tx fifo is empty
- */
-static unsigned int adm_uart_tx_empty(struct uart_port *port)
-{
- /* we always wait for completion, no buffer is made... */
- return 1;
-}
-
-/*
- * serial core request to set RTS and DTR pin state and loopback mode
- */
-static void adm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-/*
- * serial core request to return RI, CTS, DCD and DSR pin state
- */
-static unsigned int adm_uart_get_mctrl(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * serial core request to disable tx ASAP (used for flow control)
- */
-static void adm_uart_stop_tx(struct uart_port *port)
-{
- unsigned int val;
-
- val = adm_uart_readl(port, UART_CR_REG);
- val &= ~(UART_TX_INT_EN);
- adm_uart_writel(port, val, UART_CR_REG);
-}
-
-/*
- * serial core request to (re)enable tx
- */
-static void adm_uart_start_tx(struct uart_port *port)
-{
- unsigned int val;
-
- val = adm_uart_readl(port, UART_CR_REG);
- val |= UART_TX_INT_EN;
- adm_uart_writel(port, val, UART_CR_REG);
-}
-
-/*
- * serial core request to stop rx, called before port shutdown
- */
-static void adm_uart_stop_rx(struct uart_port *port)
-{
- unsigned int val;
-
- val = adm_uart_readl(port, UART_CR_REG);
- val &= ~UART_RX_INT_EN;
- adm_uart_writel(port, val, UART_CR_REG);
-}
-
-/*
- * serial core request to enable modem status interrupt reporting
- */
-static void adm_uart_enable_ms(struct uart_port *port)
-{
-}
-
-/*
- * serial core request to start/stop emitting break char
- */
-static void adm_uart_break_ctl(struct uart_port *port, int ctl)
-{
-}
-
-/*
- * return port type in string format
- */
-static const char *adm_uart_type(struct uart_port *port)
-{
- return (port->type == PORT_ADM8668) ? "adm8668_uart" : NULL;
-}
-
-/*
- * read all chars in rx fifo and send them to core
- */
-static void adm_uart_do_rx(struct uart_port *port)
-{
- struct tty_struct *tty;
- unsigned int max_count;
-
- /* limit number of char read in interrupt, should not be
- * higher than fifo size anyway since we're much faster than
- * serial port */
- max_count = 32;
- tty = port->state->port.tty;
- do {
- unsigned int iestat, c, cstat;
- char flag;
-
- /* get overrun/fifo empty information from ier
- * register */
- iestat = adm_uart_readl(port, UART_FR_REG);
- if (iestat & UART_RX_FIFO_EMPTY)
- break;
-
- /* recieve status */
- cstat = adm_uart_readl(port, UART_RSR_REG);
- /* clear errors */
- adm_uart_writel(port, cstat, UART_RSR_REG);
-
- c = adm_uart_readl(port, UART_DR_REG);
- port->icount.rx++;
- flag = TTY_NORMAL;
-
- if (unlikely((cstat & UART_RX_STATUS_MASK))) {
- /* do stats first */
- if (cstat & UART_BREAK_ERR) {
- port->icount.brk++;
- if (uart_handle_break(port))
- continue;
- }
-
- if (cstat & UART_PARITY_ERR)
- port->icount.parity++;
- if (cstat & UART_FRAMING_ERR)
- port->icount.frame++;
- if (cstat & UART_OVERRUN_ERR) {
- port->icount.overrun++;
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
-
- /* update flag wrt read_status_mask */
- cstat &= port->read_status_mask;
- if (cstat & UART_BREAK_ERR)
- flag = TTY_BREAK;
- if (cstat & UART_FRAMING_ERR)
- flag = TTY_FRAME;
- if (cstat & UART_PARITY_ERR)
- flag = TTY_PARITY;
- }
-
- if (uart_handle_sysrq_char(port, c))
- continue;
-
- /* fixthis */
- if ((cstat & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, c, flag);
- } while (max_count--);
-
- tty_flip_buffer_push(tty);
-}
-
-/*
- * fill tx fifo with chars to send, stop when fifo is about to be full
- * or when all chars have been sent.
- */
-static void adm_uart_do_tx(struct uart_port *port)
-{
- struct circ_buf *xmit;
-
- if (port->x_char) {
- adm_uart_writel(port, port->x_char, UART_DR_REG);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_tx_stopped(port))
- adm_uart_stop_tx(port);
-
- xmit = &port->state->xmit;
-
- if (uart_circ_empty(xmit))
- goto txq_empty;
- do
- {
- while ((adm_uart_readl(port, UART_FR_REG) & UART_TX_FIFO_FULL) != 0)
- ;
- adm_uart_writel(port, xmit->buf[xmit->tail], UART_DR_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- goto txq_empty;
-
- return;
-
-txq_empty:
- adm_uart_stop_tx(port);
-}
-
-/*
- * process uart interrupt
- */
-static irqreturn_t adm_uart_interrupt(int irq, void *dev_id)
-{
- struct uart_port *port;
- unsigned int irqstat;
-
- port = dev_id;
- spin_lock(&port->lock);
-
- irqstat = adm_uart_readl(port, UART_IIR_REG);
-
- if (irqstat & (UART_RX_INT|UART_RX_TIMEOUT_INT)) {
- adm_uart_do_rx(port);
- }
-
- if (irqstat & UART_TX_INT) {
- adm_uart_do_tx(port);
- }
- spin_unlock(&port->lock);
- return IRQ_HANDLED;
-}
-
-/*
- * enable rx & tx operation on uart
- */
-static void adm_uart_enable(struct uart_port *port)
-{
- unsigned int val;
-
- val = adm_uart_readl(port, UART_CR_REG);
- // BREAK_INT too
- val |= (UART_RX_INT_EN | UART_RX_TIMEOUT_INT_EN);
- adm_uart_writel(port, val, UART_CR_REG);
-}
-
-/*
- * disable rx & tx operation on uart
- */
-static void adm_uart_disable(struct uart_port *port)
-{
- unsigned int val;
-
- val = adm_uart_readl(port, UART_CR_REG);
- val &= ~(UART_TX_INT_EN | UART_RX_INT_EN | UART_RX_TIMEOUT_INT_EN);
- adm_uart_writel(port, val, UART_CR_REG);
-}
-
-/*
- * clear all unread data in rx fifo and unsent data in tx fifo
- */
-static void adm_uart_flush(struct uart_port *port)
-{
- /* read any pending char to make sure all irq status are
- * cleared */
- (void)adm_uart_readl(port, UART_DR_REG);
-}
-
-/*
- * serial core request to initialize uart and start rx operation
- */
-static int adm_uart_startup(struct uart_port *port)
-{
- int ret;
-
- /* clear any pending external input interrupt */
- (void)adm_uart_readl(port, UART_IIR_REG);
-
- /* register irq and enable rx interrupts */
- ret = request_irq(port->irq, adm_uart_interrupt, 0,
- adm_uart_type(port), port);
- if (ret)
- return ret;
-
- adm_uart_enable(port);
-
- return 0;
-}
-
-/*
- * serial core request to flush & disable uart
- */
-static void adm_uart_shutdown(struct uart_port *port)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
-// adm_uart_writel(port, 0, UART_CR_REG);
- spin_unlock_irqrestore(&port->lock, flags);
-
- adm_uart_disable(port);
- adm_uart_flush(port);
- free_irq(port->irq, port);
-}
-
-/*
- * serial core request to change current uart setting
- */
-static void adm_uart_set_termios(struct uart_port *port,
- struct ktermios *new,
- struct ktermios *old)
-{
- port->ignore_status_mask = 0;
- uart_update_timeout(port, new->c_cflag, 115200);
-}
-
-/*
- * serial core request to claim uart iomem
- */
-static int adm_uart_request_port(struct uart_port *port)
-{
- unsigned int size = 0xf;
- if (!request_mem_region(port->mapbase, size, "adm8668")) {
- dev_err(port->dev, "Memory region busy\n");
- return -EBUSY;
- }
-
- port->membase = ioremap(port->mapbase, size);
- if (!port->membase) {
- dev_err(port->dev, "Unable to map registers\n");
- release_mem_region(port->mapbase, size);
- return -EBUSY;
- }
- return 0;
-}
-
-/*
- * serial core request to release uart iomem
- */
-static void adm_uart_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, 0xf);
- iounmap(port->membase);
-}
-
-/*
- * serial core request to do any port required autoconfiguration
- */
-static void adm_uart_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- if (adm_uart_request_port(port))
- return;
- port->type = PORT_ADM8668;
- }
-}
-
-/*
- * serial core request to check that port information in serinfo are
- * suitable
- */
-static int adm_uart_verify_port(struct uart_port *port,
- struct serial_struct *serinfo)
-{
- if (port->type != PORT_ADM8668)
- return -EINVAL;
- if (port->irq != serinfo->irq)
- return -EINVAL;
- if (port->iotype != serinfo->io_type)
- return -EINVAL;
- if (port->mapbase != (unsigned long)serinfo->iomem_base)
- return -EINVAL;
- return 0;
-}
-
-/* serial core callbacks */
-static struct uart_ops adm_uart_ops = {
- .tx_empty = adm_uart_tx_empty,
- .get_mctrl = adm_uart_get_mctrl,
- .set_mctrl = adm_uart_set_mctrl,
- .start_tx = adm_uart_start_tx,
- .stop_tx = adm_uart_stop_tx,
- .stop_rx = adm_uart_stop_rx,
- .enable_ms = adm_uart_enable_ms,
- .break_ctl = adm_uart_break_ctl,
- .startup = adm_uart_startup,
- .shutdown = adm_uart_shutdown,
- .set_termios = adm_uart_set_termios,
- .type = adm_uart_type,
- .release_port = adm_uart_release_port,
- .request_port = adm_uart_request_port,
- .config_port = adm_uart_config_port,
- .verify_port = adm_uart_verify_port,
-};
-
-#ifdef CONFIG_SERIAL_ADM8668_CONSOLE
-static inline void wait_for_xmitr(struct uart_port *port)
-{
- while ((adm_uart_readl(port, UART_FR_REG) & UART_TX_FIFO_FULL) != 0)
- ;
-}
-
-/*
- * output given char
- */
-static void adm_console_putchar(struct uart_port *port, int ch)
-{
- wait_for_xmitr(port);
- adm_uart_writel(port, ch, UART_DR_REG);
-}
-
-/*
- * console core request to output given string
- */
-static void adm_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct uart_port *port;
- unsigned long flags;
- int locked;
-
- port = &ports[co->index];
-
- local_irq_save(flags);
- if (port->sysrq) {
- /* adm_uart_interrupt() already took the lock */
- locked = 0;
- } else if (oops_in_progress) {
- locked = spin_trylock(&port->lock);
- } else {
- spin_lock(&port->lock);
- locked = 1;
- }
-
- /* call helper to deal with \r\n */
- uart_console_write(port, s, count, adm_console_putchar);
-
- /* and wait for char to be transmitted */
- wait_for_xmitr(port);
-
- if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
-}
-
-/*
- * console core request to setup given console, find matching uart
- * port and setup it.
- */
-static int adm_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= ADM8668_NR_UARTS)
- return -EINVAL;
- port = &ports[co->index];
- if (!port->membase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver adm_uart_driver;
-
-static struct console adm8668_console = {
- .name = "ttyS",
- .write = adm_console_write,
- .device = uart_console_device,
- .setup = adm_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &adm_uart_driver,
-};
-
-static int __init adm8668_console_init(void)
-{
- register_console(&adm8668_console);
- return 0;
-}
-
-console_initcall(adm8668_console_init);
-
-#define ADM8668_CONSOLE (&adm8668_console)
-#else
-#define ADM8668_CONSOLE NULL
-#endif /* CONFIG_SERIAL_ADM8668_CONSOLE */
-
-static struct uart_driver adm_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = "adm8668_uart",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = 1,
- .cons = ADM8668_CONSOLE,
-};
-
-/*
- * platform driver probe/remove callback
- */
-static int __devinit adm_uart_probe(struct platform_device *pdev)
-{
- struct resource *res_mem, *res_irq;
- struct uart_port *port;
- int ret;
-
- if (pdev->id < 0 || pdev->id >= ADM8668_NR_UARTS)
- return -EINVAL;
-
- if (ports[pdev->id].membase)
- return -EBUSY;
-
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res_mem)
- return -ENODEV;
-
- res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res_irq)
- return -ENODEV;
-
- port = &ports[pdev->id];
- memset(port, 0, sizeof(*port));
- port->iotype = UPIO_MEM;
- port->mapbase = res_mem->start;
- port->irq = res_irq->start;
- port->ops = &adm_uart_ops;
- port->flags = UPF_BOOT_AUTOCONF;
- port->dev = &pdev->dev;
- port->fifosize = 8;
- port->uartclk = ADM8668_UARTCLK_FREQ;
-
- ret = uart_add_one_port(&adm_uart_driver, port);
- if (ret) {
- ports[pdev->id].membase = 0;
- return ret;
- }
- platform_set_drvdata(pdev, port);
- return 0;
-}
-
-static int __devexit adm_uart_remove(struct platform_device *pdev)
-{
- struct uart_port *port;
-
- port = platform_get_drvdata(pdev);
- uart_remove_one_port(&adm_uart_driver, port);
- platform_set_drvdata(pdev, NULL);
- /* mark port as free */
- ports[pdev->id].membase = 0;
- return 0;
-}
-
-/*
- * platform driver stuff
- */
-static struct platform_driver adm_uart_platform_driver = {
- .probe = adm_uart_probe,
- .remove = __devexit_p(adm_uart_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = "adm8668_uart",
- },
-};
-
-static int __init adm_uart_init(void)
-{
- int ret;
-
- ret = uart_register_driver(&adm_uart_driver);
- if (ret)
- return ret;
-
- ret = platform_driver_register(&adm_uart_platform_driver);
- if (ret)
- uart_unregister_driver(&adm_uart_driver);
-
- return ret;
-}
-
-static void __exit adm_uart_exit(void)
-{
- platform_driver_unregister(&adm_uart_platform_driver);
- uart_unregister_driver(&adm_uart_driver);
-}
-
-module_init(adm_uart_init);
-module_exit(adm_uart_exit);
-
-MODULE_AUTHOR("Scott Nicholas <neutronscott@scottn.us>");
-MODULE_DESCRIPTION("ADM8668 integrated uart driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/asm/sizes.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/asm/sizes.h
new file mode 100644
index 0000000000..503843db15
--- /dev/null
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/asm/sizes.h
@@ -0,0 +1,56 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size definitions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_16 0x00000010
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */