strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

13 files changed, 2166 insertions, 0 deletions

diff --git a/target/linux/adm5120/image/lzma-loader/Makefile b/target/linux/adm5120/image/lzma-loader/Makefile
new file mode 100644
index 0000000000..74866e765e
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/Makefile
@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+LOADER		:= loader.bin
+LOADER_NAME	:= $(basename $(notdir $(LOADER)))
+LOADER_DATA 	:=
+TARGET_DIR	:=
+
+ifeq ($(TARGET_DIR),)
+TARGET_DIR	:= $(KDIR)
+endif
+
+LOADER_BIN	:= $(TARGET_DIR)/$(LOADER_NAME).bin
+LOADER_GZ	:= $(TARGET_DIR)/$(LOADER_NAME).gz
+LOADER_ELF	:= $(TARGET_DIR)/$(LOADER_NAME).elf
+
+LZMA_STARTUP_ORG:= 0
+LZMA_TEXT_START	:= 0x80300000
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
+
+.PHONY : loader-compile loader.bin loader.elf loader.gz
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+loader-compile: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
+		LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \
+		LZMA_TEXT_START=$(LZMA_TEXT_START) \
+		LOADER_DATA=$(LOADER_DATA) \
+		CONFIG_BOARD=$(CONFIG_BOARD) \
+		CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \
+		clean all
+
+loader.gz: $(PKG_BUILD_DIR)/loader.bin
+	gzip -nc9 $< > $(LOADER_GZ)
+
+loader.elf: $(PKG_BUILD_DIR)/loader.elf
+	$(CP) $< $(LOADER_ELF)
+
+loader.bin: $(PKG_BUILD_DIR)/loader.bin
+	$(CP) $< $(LOADER_BIN)
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: loader-compile
+
+install:
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000000..75a358a9ee
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,589 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+  
+  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to 
+  statically or dynamically link your Code (or bind by name) to the 
+  interfaces of this file without subjecting your linked Code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+ 
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
+  
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  #endif
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int RemainLen;
+  Byte TempDictionary[4];
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  vs->Range = Range;
+  vs->Code = Code;
+  #ifdef _LZMA_IN_CB
+  vs->InCallback = InCallback;
+  #endif
+
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  Byte *Buffer = vs->Buffer;
+  Byte *BufferLim = vs->BufferLim;
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback = vs->InCallback;
+  #endif
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  int state = vs->State;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+
+  UInt32 i;
+  int state = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1;
+  
+
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        // prob += 0x100;
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+        // prob -= 0x100;
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else             
+    {
+      // int isItRep;
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+            if (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+                == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else 
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = -1;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos || rep0 > dictionarySize
+        #endif
+        ) 
+        return LZMA_RESULT_DATA_ERROR;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000000..53677350ae
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/Makefile b/target/linux/adm5120/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000000..a553b7fdef
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/Makefile
@@ -0,0 +1,99 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+# Copyright 2007 Gabor Juhos <juhosg at openwrt.org>
+#   Modified to support user defined entry point address.
+#   Added support for make targets with different names
+#
+
+LOADADDR	:= 0x80001000
+LZMA_TEXT_START	:= 0x80500000
+LZMA_STARTUP_ORG:= 0
+LOADER_DATA	:=
+CONFIG_PASS_KARGS :=
+CONFIG_BOARD	:=
+
+CC		:= $(CROSS_COMPILE)gcc
+LD		:= $(CROSS_COMPILE)ld
+OBJCOPY		:= $(CROSS_COMPILE)objcopy
+OBJDUMP		:= $(CROSS_COMPILE)objdump
+
+BIN_FLAGS	:= -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+		  -ffunction-sections -pipe -mlong-calls -fno-common \
+		  -ffreestanding \
+		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS		+= -DLOADADDR=$(LOADADDR)
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG)
+
+LDFLAGS		= -static --gc-sections -no-warn-mismatch
+LDFLAGS		+= -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
+
+O_FORMAT 	= $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+OBJECTS		:= head.o decompress.o board.o printf.o LzmaDecode.o
+
+ifneq ($(strip $(LOADER_DATA)),)
+OBJECTS		+= data.o
+CFLAGS		+= -DLZMA_WRAPPER=1
+else
+CFLAGS		+= -D_LZMA_IN_CB
+endif
+
+ifneq ($(strip $(CONFIG_PASS_KARGS)),)
+CFLAGS		+= -DCONFIG_PASS_KARGS
+endif
+
+BOARD_DEF := $(strip $(CONFIG_BOARD))
+BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -)
+ifneq ($(BOARD_DEF),)
+CFLAGS		+= -DCONFIG_BOARD_$(BOARD_DEF)
+endif
+
+all: loader.bin
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+%.o : %.S
+	$(CC) $(ASFLAGS) -c -o $@ $<
+
+data.o: $(LOADER_DATA)
+	$(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
+
+loader.bin: loader.elf
+	$(OBJCOPY) $(BIN_FLAGS) $< $@
+
+loader.elf: $(OBJECTS)
+	$(LD) $(LDFLAGS) -o $@ $(OBJECTS)
+
+mrproper: clean
+
+clean:
+	rm -f *.elf *.bin *.o
+
+
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/README b/target/linux/adm5120/image/lzma-loader/src/README
new file mode 100644
index 0000000000..16649e9500
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+	0.02	Initial release
+	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+		output size to decoder (stream mode compressed input is not 
+		a requirement anymore)
+	0.04	Reordered functions using lds script
diff --git a/target/linux/adm5120/image/lzma-loader/src/board.c b/target/linux/adm5120/image/lzma-loader/src/board.c
new file mode 100644
index 0000000000..22317f9683
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/board.c
@@ -0,0 +1,178 @@
+/*
+ * ADM5120 specific board support for LZMA decompressor
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stddef.h>
+
+#define READREG(r)	*(volatile unsigned int *)(r)
+#define WRITEREG(r,v)	*(volatile unsigned int *)(r) = v
+
+/*
+ * INTC definitions
+ */
+#define INTC_BASE	0xB2200000
+
+/* INTC registers */
+#define INTC_REG_IRQ_DISABLE	0x0C
+
+/*
+ * UART definitions
+ */
+#define UART_BASE	0xB2600000
+/* UART registers */
+#define UART_REG_DATA	0x00	/* Data register */
+#define UART_REG_ECR	0x04	/* Error Clear register */
+#define UART_REG_LCRH	0x08	/* Line Control High register */
+#define UART_REG_LCRM	0x0C	/* Line Control Middle register */
+#define UART_REG_LCRL	0x10	/* Line Control Low register */
+#define UART_REG_CTRL	0x14	/* Control register */
+#define UART_REG_FLAG   0x18	/* Flag register */
+
+/* Control register bits */
+#define UART_CTRL_EN	( 1 << 0 )	/* UART enable */
+
+/* Line Control High register bits */
+#define UART_LCRH_FEN	( 1 << 4 )	/* FIFO enable */
+
+/* Flag register bits */
+#define UART_FLAG_CTS	( 1 << 0 )
+#define UART_FLAG_DSR	( 1 << 1 )
+#define UART_FLAG_DCD	( 1 << 2 )
+#define UART_FLAG_BUSY	( 1 << 3 )
+#define UART_FLAG_RXFE	( 1 << 4 )	/* RX FIFO empty */
+#define UART_FLAG_TXFF	( 1 << 5 )	/* TX FIFO full */
+#define UART_FLAG_RXFF	( 1 << 6 )	/* RX FIFO full */
+#define UART_FLAG_TXFE	( 1 << 7 )	/* TX FIFO empty */
+
+/*
+ * SWITCH definitions
+ */
+#define SWITCH_BASE	0xB2000000
+
+#define SWITCH_REG_CPUP_CONF	0x0024
+#define SWITCH_REG_PORT_CONF0	0x0028
+
+#define SWITCH_REG_GPIO_CONF0	0x00B8
+#define SWITCH_REG_GPIO_CONF2	0x00BC
+
+#define SWITCH_REG_PORT0_LED	0x0100
+#define SWITCH_REG_PORT1_LED	0x0104
+#define SWITCH_REG_PORT2_LED	0x0108
+#define SWITCH_REG_PORT3_LED	0x010C
+#define SWITCH_REG_PORT4_LED	0x0110
+
+#define SWITCH_PORTS_HW		0x3F		/* Hardware Ports */
+
+/* CPUP_CONF register bits */
+#define CPUP_CONF_DCPUP		( 1 << 0 )	/* Disable CPU port */
+
+/* PORT_CONF0 register bits */
+#define PORT_CONF0_DP_SHIFT	0	/* disable port shift*/
+
+
+/*
+ * UART routines
+ */
+
+#define UART_READ(r)	READREG(UART_BASE+(r))
+#define UART_WRITE(r,v)	WRITEREG(UART_BASE+(r),(v))
+
+static void uart_init(void)
+{
+#if 0
+	unsigned int t;
+
+	/* disable uart */
+	UART_WRITE(UART_REG_CTRL, 0);
+
+	/* keep current baud rate */
+	t = UART_READ(UART_REG_LCRM);
+	UART_WRITE(UART_REG_LCRM, t);
+	t = UART_READ(UART_REG_LCRL);
+	UART_WRITE(UART_REG_LCRL, t);
+
+	/* keep data, stop, and parity bits, but disable FIFO */
+	t = UART_READ(UART_REG_LCRH);
+	t &= ~(UART_LCRH_FEN);
+	UART_WRITE(UART_REG_LCRH, t );
+
+	/* clear error bits */
+	UART_WRITE(UART_REG_ECR, 0xFF);
+
+	/* enable uart, and disable interrupts */
+	UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
+}
+
+/*
+ * INTC routines
+ */
+
+#define INTC_READ(r)	READREG(INTC_BASE+(r))
+#define INTC_WRITE(r,v)	WRITEREG(INTC_BASE+(r),v)
+
+static void intc_init(void)
+{
+	INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF);
+}
+
+/*
+ * SWITCH routines
+ */
+
+#define SWITCH_READ(r)		READREG(SWITCH_BASE+(r))
+#define SWITCH_WRITE(r,v)	WRITEREG(SWITCH_BASE+(r),v)
+
+static void switch_init(void)
+{
+	/* disable PHYS ports */
+	SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
+	    (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
+
+	/* disable CPU port */
+	SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP);
+
+	/* disable GPIO lines */
+	SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
+	SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
+
+	/* disable LED lines */
+	SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0);
+}
+
+void board_putc(int ch)
+{
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+
+	UART_WRITE(UART_REG_DATA, ch);
+
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void board_init(void)
+{
+	intc_init();
+	switch_init();
+	uart_init();
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/config.h b/target/linux/adm5120/image/lzma-loader/src/config.h
new file mode 100644
index 0000000000..310189c6d6
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/config.h
@@ -0,0 +1,119 @@
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#define FLASH_2M	(2<<20)
+#define FLASH_4M	(4<<20)
+
+/*
+ * Cellvision/SparkLAN boards
+ */
+
+#if defined(CONFIG_BOARD_CAS630)
+#  define CONFIG_BOARD_NAME	"CAS-630"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS670)
+#  define CONFIG_BOARD_NAME	"CAS-670"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS700)
+#  define CONFIG_BOARD_NAME	"CAS-700"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS790)
+#  define CONFIG_BOARD_NAME	"CAS-790"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS771)
+#  define CONFIG_BOARD_NAME	"CAS-771"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS861)
+#  define CONFIG_BOARD_NAME	"CAS-861"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS101U)
+#  define CONFIG_BOARD_NAME	"NFS-101U"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS202U)
+#  define CONFIG_BOARD_NAME	"NFS-202U"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Compex boards
+ */
+#if defined(CONFIG_BOARD_WP54GWRT)
+#  define CONFIG_BOARD_NAME	"WP54G-WRT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Edimax boards
+ */
+#if defined(CONFIG_BOARD_BR6104K)
+#  define CONFIG_BOARD_NAME	"BR-6104K"
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+#if defined(CONFIG_BOARD_BR6104KP)
+#  define CONFIG_BOARD_NAME	"BR-6104KP"
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+/*
+ * Infineon boards
+ */
+#if defined(CONFIG_BOARD_EASY5120PATA)
+#  define CONFIG_BOARD_NAME	"EASY 5120P-ATA"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120RT)
+#  define CONFIG_BOARD_NAME	"EASY 5120-RT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120WVOIP)
+#  define CONFIG_BOARD_NAME	"EASY 5120-WVOIP"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY83000)
+#  define CONFIG_BOARD_NAME	"EASY 83000"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * ZyXEL boards
+ */
+#if defined(CONFIG_BOARD_P334WT)
+#  define CONFIG_BOARD_NAME	"P-334WT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_P335)
+#  define CONFIG_BOARD_NAME	"P-335"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Default values
+ */
+#ifndef CONFIG_BOARD_NAME
+#  define CONFIG_BOARD_NAME	"ADM5120"
+#endif
+
+#ifndef CONFIG_FLASH_SIZE
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/adm5120/image/lzma-loader/src/decompress.c b/target/linux/adm5120/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000000..9e2a04c994
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/decompress.c
@@ -0,0 +1,349 @@
+/*
+ * $Id$
+ *
+ * LZMA compressed kernel decompressor for ADM5120 boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ * 24-Mar-2007 Gabor Juhos
+ *   pass original values of the a0,a1,a2,a3 registers to the kernel
+ *
+ * 19-May-2007 Gabor Juhos
+ *   endiannes related cleanups
+ *   add support for decompressing an embedded kernel
+ *
+ */
+
+#include <stddef.h>
+
+#include "config.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define ADM5120_FLASH_START	0x1fc00000	/* Flash start */
+#define ADM5120_FLASH_END	0x1fe00000	/* Flash end */
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:				\
+		: "r" (base),			\
+		  "i" (op));
+
+#ifdef LZMA_DEBUG
+#  define DBG(f, a...)	printf(f, ## a)
+#else
+#  define DBG(f, a...)	do {} while (0)
+#endif
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+#define TRX_ALIGN	0x1000
+
+struct trx_header {
+	unsigned int magic;		/* "HDR0" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned int offsets[3];	/* Offsets of partitions from start of header */
+};
+
+struct env_var {
+	char	*name;
+	char	*value;
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+extern void board_init(void);
+
+typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3);
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed);
+
+#ifdef CONFIG_PASS_KARGS
+#define ENVV(n,v)	{.name = (n), .value = (v)}
+struct env_var env_vars[] = {
+	ENVV("board_name",	CONFIG_BOARD_NAME),
+	ENVV(NULL, NULL)
+};
+#endif
+
+static void halt(void)
+{
+	printf("\nSystem halted!\n");
+	for(;;);
+}
+
+#if LZMA_WRAPPER
+extern unsigned char _lzma_data_start[];
+extern unsigned char _lzma_data_end[];
+
+unsigned char *data;
+unsigned long datalen;
+
+static __inline__ unsigned char get_byte(void)
+{
+	datalen--;
+	return *data++;
+}
+
+static void decompress_init(void)
+{
+	data = _lzma_data_start;
+	datalen = _lzma_data_end - _lzma_data_start;
+}
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed)
+{
+	return LzmaDecode(buffer, bufferSize, lc, lp, pb, data, datalen,
+		outStream, outSize, outSizeProcessed);
+}
+#endif /* LZMA_WRAPPER */
+
+#if !(LZMA_WRAPPER)
+
+#define FLASH_BANK_SIZE	(2<<20)
+
+static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START);
+static unsigned long flash_ofs = 0;
+static unsigned long flash_max = 0;
+static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1);
+
+static __inline__ unsigned char get_byte(void)
+{
+	return *(flash_base+flash_ofs++);
+}
+
+static int lzma_read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	unsigned long len;
+
+	if (flash_ofs >= flash_max)
+		return LZMA_RESULT_DATA_ERROR;
+
+	len = flash_max-flash_ofs;
+
+#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE)
+	if (flash_ofs < FLASH_BANK_SIZE) {
+		/* switch to bank 0 */
+		DBG("lzma_read_byte: switch to bank 0\n");
+
+		if (len > FLASH_BANK_SIZE-flash_ofs)
+			len = FLASH_BANK_SIZE-flash_ofs;
+	} else {
+		/* switch to bank 1 */
+		DBG("lzma_read_byte: switch to bank 1\n");
+	}
+#endif
+	DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len);
+
+	*buffer = flash_base+(flash_ofs & flash_ofs_mask);
+	*bufferSize = len;
+	flash_ofs += len;
+
+	return LZMA_RESULT_OK;
+}
+
+static ILzmaInCallback lzma_callback = {
+	.Read	= lzma_read_byte,
+};
+
+static __inline__ unsigned int read_le32(void *buf)
+{
+	unsigned char *p = buf;
+
+	return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) +
+		((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24));
+}
+
+static void decompress_init(void)
+{
+	struct trx_header *hdr = NULL;
+	unsigned long kofs,klen;
+
+    	printf("Looking for TRX header... ");
+	/* look for trx header, 32-bit data access */
+	for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) {
+		if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) {
+			hdr = (struct trx_header *)&flash_base[flash_ofs];
+			break;
+		}
+	}
+
+	if (hdr == NULL) {
+		printf("not found!\n");
+		/* no compressed kernel found, halting */
+		halt();
+	}
+
+	/* compressed kernel is in the partition 0 or 1 */
+	kofs = read_le32(&hdr->offsets[1]);
+	if (kofs == 0 || kofs > 65536) {
+		klen = kofs-read_le32(&hdr->offsets[0]);
+		kofs = read_le32(&hdr->offsets[0]);
+	} else {
+		klen = read_le32(&hdr->offsets[2]);
+		if (klen > kofs)
+			klen -= kofs;
+		else
+			klen = read_le32(&hdr->len)-kofs;
+	}
+
+	printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs,
+		kofs, klen);
+
+	flash_ofs += kofs;
+	flash_max = flash_ofs+klen;
+}
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed)
+{
+	return LzmaDecode(buffer, bufferSize, lc, lp, pb, &lzma_callback,
+		outStream, outSize, outSizeProcessed);
+}
+#endif /* !(LZMA_WRAPPER) */
+
+/* should be the first function */
+void decompress_entry(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3,
+	unsigned long icache_size, unsigned long icache_lsize,
+	unsigned long dcache_size, unsigned long dcache_lsize)
+{
+	unsigned int i;  /* temp value */
+	unsigned int lc; /* literal context bits */
+	unsigned int lp; /* literal pos state bits */
+	unsigned int pb; /* pos state bits */
+	unsigned int osize; /* uncompressed size */
+	int res;
+
+	board_init();
+
+	printf("\n\nLZMA loader for " CONFIG_BOARD_NAME
+			", Copyright (C) 2007 OpenWrt.org\n\n");
+
+	decompress_init();
+
+	/* lzma args */
+	i = get_byte();
+	lc = i % 9, i = i / 9;
+	lp = i % 5, pb = i / 5;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	printf("decompressing kernel... ");
+
+	/* decompress kernel */
+	res = decompress_data(workspace, ~0, lc, lp, pb,
+		(unsigned char *)LOADADDR, osize, &i);
+
+	if (res != LZMA_RESULT_OK) {
+		printf("failed, ");
+		switch (res) {
+		case LZMA_RESULT_DATA_ERROR:
+			printf("data error!\n");
+			break;
+		case LZMA_RESULT_NOT_ENOUGH_MEM:
+			printf("not enough memory!\n");
+			break;
+		default:
+			printf("unknown error %d!\n", res);
+		}
+		halt();
+	} else
+		printf("done!\n");
+
+	blast_dcache(dcache_size, dcache_lsize);
+	blast_icache(icache_size, icache_lsize);
+
+	printf("launching kernel...\n\n");
+
+#ifdef CONFIG_PASS_KARGS
+	reg_a0 = 0;
+	reg_a1 = 0;
+	reg_a2 = (unsigned long)env_vars;
+	reg_a3 = 0;
+#endif
+	/* Jump to load address */
+	((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/head.S b/target/linux/adm5120/image/lzma-loader/src/head.S
new file mode 100644
index 0000000000..ee8b3200cf
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/head.S
@@ -0,0 +1,209 @@
+/* Copyright 2007 Gabor Juhos <juhosg@freemail.hu>	*/
+/* keep original values of the a0,a1,a2,a3 registers	*/
+/* modifed to support user defined entry point address	*/
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* idea taken from original bunzip2 decompressor code	*/
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_STATUS	$12
+#define C0_CAUSE	$13
+#define C0_CONFIG	$16
+#define C0_WATCHLO	$18
+#define C0_WATCHHI	$19
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+	.text
+
+#if (LZMA_STARTUP_ORG)
+	.set	noreorder
+
+	b	startup
+	nop
+
+	.org	LZMA_STARTUP_ORG
+#endif
+
+LEAF(startup)
+	.set noreorder
+	.set mips32
+	
+	mtc0	zero, C0_WATCHLO	# clear watch registers
+	mtc0	zero, C0_WATCHHI
+
+	mtc0	zero, C0_CAUSE		# clear before writing status register
+
+	mfc0	t0, C0_STATUS		# get status register
+	li	t1, ~(0xFF01)
+	and	t0, t1			# mask interrupts
+	mtc0	t0, C0_STATUS		# set up status register
+
+	move	t1, ra			# save return address
+	la	t0, __reloc_label	# get linked address of label
+	bal	__reloc_label		# branch and link to label to
+	nop				# get actual address
+__reloc_label:
+	subu	t0, ra, t0		# get reloc_delta
+	move	ra, t1			# restore return address
+
+	beqz	t0, __reloc_end         # if delta is 0 we are in the right place
+	nop
+
+	/* Copy our code to the right place */
+	la	t1, _code_start		# get linked address of _code_start
+	la	t2, _code_end		# get linked address of _code_end
+	addu	t0, t0, t1		# calculate actual address of _code_start
+
+__reloc_copy:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	add	t1, 4
+	blt	t1, t2, __reloc_copy
+	add	t0, 4
+
+__reloc_end:
+
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	.set	mips32
+	mfc0	s0,C0_CONFIG,1
+	.set	mips0
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s1
+
+nodc:
+	/* Now we get to do it all again for the I$ */
+
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Invalidate_I,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s3
+
+noic:
+	/* Setup new "C" stack */
+	la	sp, _stack
+
+	addiu	sp, -32			/* reserve stack for parameters */
+#if 0
+	sw	a0, 0(sp)
+	sw	a1, 4(sp)
+	sw	a2, 8(sp)
+	sw	a3, 12(sp)
+#endif
+	sw	s3, 16(sp)		/* icache line size */
+	sw	s4, 20(sp)		/* icache size */
+	sw	s1, 24(sp)		/* dcache line size */
+	sw	s2, 28(sp)		/* dcache size */
+
+	/* jump to the decompressor routine */
+	la	t0, decompress_entry
+	jr	t0
+	nop
+
+	.set reorder
+END(startup)
diff --git a/target/linux/adm5120/image/lzma-loader/src/loader.lds b/target/linux/adm5120/image/lzma-loader/src/loader.lds
new file mode 100644
index 0000000000..bae70fb6ea
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/loader.lds
@@ -0,0 +1,29 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.text : {
+		_code_start = .;
+		*(.text)
+		*(.text.*)
+		*(.rodata)
+		*(.rodata.*)
+		. = ALIGN(16);
+		*(.data.lzma)
+	}
+
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+	_code_end = .;
+
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+
+	. = ALIGN(16);
+	. = . + 8192;
+	_stack = .;
+
+	workspace = .;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
new file mode 100644
index 0000000000..abf756ba13
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
@@ -0,0 +1,8 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.data.lzma : {
+		_lzma_data_start = .;
+		*(.data)
+		_lzma_data_end = .;
+	}
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.c b/target/linux/adm5120/image/lzma-loader/src/printf.c
new file mode 100644
index 0000000000..7bb5a86e18
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include	"printf.h"
+
+extern void board_putc(int ch);
+
+/* this is the maximum width for a variable */
+#define		LP_MAX_BUF	256
+
+/* macros */
+#define		IsDigit(x)	( ((x) >= '0') && ((x) <= '9') )
+#define		Ctod(x)		( (x) - '0')
+
+/* forward declaration */
+static int PrintChar(char *, char, int, int);
+static int PrintString(char *, char *, int, int);
+static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+static void
+lp_Print(void (*output)(void *, char *, int),
+	 void * arg,
+	 char *fmt,
+	 va_list ap)
+{
+
+#define 	OUTPUT(arg, s, l)  \
+  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+    } else { \
+      (*output)(arg, s, l); \
+    } \
+  }
+
+    char buf[LP_MAX_BUF];
+
+    char c;
+    char *s;
+    long int num;
+
+    int longFlag;
+    int negFlag;
+    int width;
+    int prec;
+    int ladjust;
+    char padc;
+
+    int length;
+
+    for(;;) {
+	{
+	    /* scan for the next '%' */
+	    char *fmtStart = fmt;
+	    while ( (*fmt != '\0') && (*fmt != '%')) {
+		fmt ++;
+	    }
+
+	    /* flush the string found so far */
+	    OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+	    /* are we hitting the end? */
+	    if (*fmt == '\0') break;
+	}
+
+	/* we found a '%' */
+	fmt ++;
+
+	/* check for long */
+	if (*fmt == 'l') {
+	    longFlag = 1;
+	    fmt ++;
+	} else {
+	    longFlag = 0;
+	}
+
+	/* check for other prefixes */
+	width = 0;
+	prec = -1;
+	ladjust = 0;
+	padc = ' ';
+
+	if (*fmt == '-') {
+	    ladjust = 1;
+	    fmt ++;
+	}
+
+	if (*fmt == '0') {
+	    padc = '0';
+	    fmt++;
+	}
+
+	if (IsDigit(*fmt)) {
+	    while (IsDigit(*fmt)) {
+		width = 10 * width + Ctod(*fmt++);
+	    }
+	}
+
+	if (*fmt == '.') {
+	    fmt ++;
+	    if (IsDigit(*fmt)) {
+		prec = 0;
+		while (IsDigit(*fmt)) {
+		    prec = prec*10 + Ctod(*fmt++);
+		}
+	    }
+	}
+
+
+	/* check format flag */
+	negFlag = 0;
+	switch (*fmt) {
+	 case 'b':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'd':
+	 case 'D':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    if (num < 0) {
+		num = - num;
+		negFlag = 1;
+	    }
+	    length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'o':
+	 case 'O':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'u':
+	 case 'U':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'x':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'X':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'c':
+	    c = (char)va_arg(ap, int);
+	    length = PrintChar(buf, c, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 's':
+	    s = (char*)va_arg(ap, char *);
+	    length = PrintString(buf, s, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case '\0':
+	    fmt --;
+	    break;
+
+	 default:
+	    /* output this char as it is */
+	    OUTPUT(arg, fmt, 1);
+	}	/* switch (*fmt) */
+
+	fmt ++;
+    }		/* for(;;) */
+
+    /* special termination call */
+    OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+static int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+    int i;
+
+    if (length < 1) length = 1;
+    if (ladjust) {
+	*buf = c;
+	for (i=1; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-1; i++) buf[i] = ' ';
+	buf[length - 1] = c;
+    }
+    return length;
+}
+
+static int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+    int i;
+    int len=0;
+    char* s1 = s;
+    while (*s1++) len++;
+    if (length < len) length = len;
+
+    if (ladjust) {
+	for (i=0; i< len; i++) buf[i] = s[i];
+	for (i=len; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-len; i++) buf[i] = ' ';
+	for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+    }
+    return length;
+}
+
+static int
+PrintNum(char * buf, unsigned long u, int base, int negFlag,
+	 int length, int ladjust, char padc, int upcase)
+{
+    /* algorithm :
+     *  1. prints the number from left to right in reverse form.
+     *  2. fill the remaining spaces with padc if length is longer than
+     *     the actual length
+     *     TRICKY : if left adjusted, no "0" padding.
+     *		    if negtive, insert  "0" padding between "0" and number.
+     *  3. if (!ladjust) we reverse the whole string including paddings
+     *  4. otherwise we only reverse the actual string representing the num.
+     */
+
+    int actualLength =0;
+    char *p = buf;
+    int i;
+
+    do {
+	int tmp = u %base;
+	if (tmp <= 9) {
+	    *p++ = '0' + tmp;
+	} else if (upcase) {
+	    *p++ = 'A' + tmp - 10;
+	} else {
+	    *p++ = 'a' + tmp - 10;
+	}
+	u /= base;
+    } while (u != 0);
+
+    if (negFlag) {
+	*p++ = '-';
+    }
+
+    /* figure out actual length and adjust the maximum length */
+    actualLength = p - buf;
+    if (length < actualLength) length = actualLength;
+
+    /* add padding */
+    if (ladjust) {
+	padc = ' ';
+    }
+    if (negFlag && !ladjust && (padc == '0')) {
+	for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+	buf[length -1] = '-';
+    } else {
+	for (i = actualLength; i< length; i++) buf[i] = padc;
+    }
+
+
+    /* prepare to reverse the string */
+    {
+	int begin = 0;
+	int end;
+	if (ladjust) {
+	    end = actualLength - 1;
+	} else {
+	    end = length -1;
+	}
+
+	while (end > begin) {
+	    char tmp = buf[begin];
+	    buf[begin] = buf[end];
+	    buf[end] = tmp;
+	    begin ++;
+	    end --;
+	}
+    }
+
+    /* adjust the string pointer */
+    return length;
+}
+
+static void printf_output(void *arg, char *s, int l)
+{
+    int i;
+
+    // special termination call
+    if ((l==1) && (s[0] == '\0')) return;
+
+    for (i=0; i< l; i++) {
+	board_putc(s[i]);
+	if (s[i] == '\n') board_putc('\r');
+    }
+}
+
+void printf(char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    lp_Print(printf_output, 0, fmt, ap);
+    va_end(ap);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.h b/target/linux/adm5120/image/lzma-loader/src/printf.h
new file mode 100644
index 0000000000..9b1c1df232
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */