aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120/files-3.8/arch
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2015-01-10 18:08:53 +0000
committerFlorian Fainelli <florian@openwrt.org>2015-01-10 18:08:53 +0000
commitc119814b2bf25bc89a5cbfb3eb791ad7461d0c38 (patch)
treefd78acd3929b0e93574a133fdcd2c2fc026aa45d /target/linux/adm5120/files-3.8/arch
parent0c5feac5731052fea718ebf350b13d9eaaefc432 (diff)
downloadupstream-c119814b2bf25bc89a5cbfb3eb791ad7461d0c38.tar.gz
upstream-c119814b2bf25bc89a5cbfb3eb791ad7461d0c38.tar.bz2
upstream-c119814b2bf25bc89a5cbfb3eb791ad7461d0c38.zip
adm5120: move files to files-3.8
In preparation for adding new kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43914
Diffstat (limited to 'target/linux/adm5120/files-3.8/arch')
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig197
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform19
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile4
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c37
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c147
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h28
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c47
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile8
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c76
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c65
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c31
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c330
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c171
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c149
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c375
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c264
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c128
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile5
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c60
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h23
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c28
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c63
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c95
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile5
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c36
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c39
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c43
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c84
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h23
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile1
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c120
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile6
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c48
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c24
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c22
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c23
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c108
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h25
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile8
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c35
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c40
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c36
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c131
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c70
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c27
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c149
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h33
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile1
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c96
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c71
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile1
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile10
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c55
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c119
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c69
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c47
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c68
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h50
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c121
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile4
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c34
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c21
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c85
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h22
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h53
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h129
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h63
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h92
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h89
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h87
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h300
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h64
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h56
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h71
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h115
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h43
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h17
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h18
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h18
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h179
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h36
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h86
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h25
-rw-r--r--target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c277
84 files changed, 6178 insertions, 0 deletions
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig
new file mode 100644
index 0000000000..be35a8f72e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig
@@ -0,0 +1,197 @@
+if ADM5120
+
+menu "ADM5120 Board selection"
+
+config ADM5120_MACH_CAS_771
+ bool "Cellvision CAS-771/771W support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_CELLVISION
+ default y
+
+config ADM5120_MACH_NFS_101
+ bool "Cellvision NFS-101U/101WU support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_CELLVISION
+ default y
+
+config ADM5120_MACH_NP27G
+ bool "Compex NP27G support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_COMPEX
+ default y
+
+config ADM5120_MACH_NP28G
+ bool "Compex NP28G support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_COMPEX
+ default y
+
+config ADM5120_MACH_WP54
+ bool "Compex WP54 family support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_COMPEX
+ default y
+
+config ADM5120_MACH_EB_214A
+ bool "EB-214A support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_GENERIC
+ default y
+
+config ADM5120_MACH_BR_6104K
+ bool "Edimax BR-6104K support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_OEM_EDIMAX
+ default y
+
+config ADM5120_MACH_BR_6104KP
+ bool "Edimax BR-6104KP support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_OEM_EDIMAX
+ default y
+
+config ADM5120_MACH_BR_61X4WG
+ bool "Edimax BR-6104WG/6114WG support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_EDIMAX
+ default y
+
+config ADM5120_MACH_EASY5120_RT
+ bool "Infineon EASY 5120-RT Reference Board support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_INFINEON
+ default y
+
+config ADM5120_MACH_EASY5120_WVOIP
+ bool "Infineon EASY 5120-WVoIP Reference Board support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_INFINEON
+ default y
+
+config ADM5120_MACH_EASY5120P_ATA
+ bool "Infineon EASY 5120P-ATA Reference Board support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_OEM_INFINEON
+ default y
+
+config ADM5120_MACH_EASY83000
+ bool "Infineon EASY 83000 Reference Board support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_OEM_INFINEON
+ default y
+
+config ADM5120_MACH_RB_11X
+ bool "MikroTik RouterBOARD 111/112 support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_RB_133
+ bool "MikroTik RouterBOARD 133 support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_RB_133C
+ bool "MikroTik RouterBOARD 133C support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_RB_150
+ bool "MikroTik RouterBOARD 150 support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_RB_153
+ bool "MikroTik RouterBOARD 153 support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_RB_192
+ bool "MikroTik RouterBOARD 192 support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MIKROTIK
+ default y
+
+config ADM5120_MACH_PMUGW
+ bool "Motorola Powerline MU Gateway"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MOTOROLA
+ default y
+
+config ADM5120_MACH_5GXI
+ bool "OSBRiDGE 5GXi/5XLi support"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_OSBRIDGE
+ default y
+
+config ADM5120_MACH_P_334WT
+ bool "ZyXEL Prestige 334WT"
+ depends on CPU_BIG_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_ZYXEL
+ default y
+
+config ADM5120_MACH_P_335
+ bool "ZyXEL Prestige 335/335WT"
+ depends on CPU_BIG_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_ZYXEL
+ default y
+
+endmenu
+
+config ADM5120_SOC_BGA
+ select HW_HAS_PCI
+ def_bool n
+
+config ADM5120_OEM_CELLVISION
+ def_bool n
+
+config ADM5120_OEM_COMPEX
+ def_bool n
+
+config ADM5120_OEM_EDIMAX
+ def_bool n
+
+config ADM5120_OEM_GENERIC
+ def_bool n
+
+config ADM5120_OEM_INFINEON
+ def_bool n
+
+config ADM5120_OEM_MIKROTIK
+ def_bool n
+
+config ADM5120_OEM_MOTOROLA
+ def_bool n
+
+config ADM5120_OEM_OSBRIDGE
+ def_bool n
+
+config ADM5120_OEM_ZYXEL
+ def_bool n
+
+config ARM_AMBA
+ def_bool y
+
+endif
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform
new file mode 100644
index 0000000000..0c9edf218b
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform
@@ -0,0 +1,19 @@
+#
+# Infineon/ADMtek ADM5120
+#
+
+platform-$(CONFIG_ADM5120) += adm5120/common/
+
+platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/
+platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/
+platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/
+platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/
+platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/
+platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/
+platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/
+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/
+platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/
+
+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
+load-$(CONFIG_ADM5120) += 0xffffffff80001000
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile
new file mode 100644
index 0000000000..a949fc9f61
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile
@@ -0,0 +1,4 @@
+obj-y += cellvision.o
+
+obj-$(CONFIG_ADM5120_MACH_CAS_771) += cas-771.o
+obj-$(CONFIG_ADM5120_MACH_NFS_101) += nfs-101.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c
new file mode 100644
index 0000000000..5033e02469
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c
@@ -0,0 +1,37 @@
+/*
+ * Cellvision/SparkLAN CAS-771/771W support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+ PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
+ PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+static struct gpio_led cas771_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL),
+ /* GPIO PIN3 is the reset */
+ GPIO_LED_STD(ADM5120_GPIO_PIN6, "access", NULL),
+ GPIO_LED_STD(ADM5120_GPIO_P0L1, "status", NULL),
+ GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag", NULL),
+};
+
+static void __init cas771_setup(void)
+{
+ cas7xx_setup();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
+ cas771_gpio_leds);
+ adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_CAS771, "CAS-771", "Cellvision CAS-771/771W",
+ cas771_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c
new file mode 100644
index 0000000000..a7cedf03bc
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c
@@ -0,0 +1,147 @@
+/*
+ * Cellvision/SparkLAN boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+#include <prom/admboot.h>
+
+#define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
+#define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20)
+
+#define CELLVISION_CONFIG_OFFSET 0x8000
+#define CELLVISION_CONFIG_SIZE 0x1000
+
+static struct mtd_partition cas6xx_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "nvfs1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "nvfs2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "nvfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 128*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(CELLVISION_GPIO_FLASH_A20, 0);
+ break;
+ case 1:
+ gpio_set_value(CELLVISION_GPIO_FLASH_A20, 1);
+ break;
+ }
+}
+
+static void __init cellvision_flash_setup(void)
+{
+ /* setup flash A20 line */
+ gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
+ gpio_direction_output(CELLVISION_GPIO_FLASH_A20, 0);
+
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_add_device_flash(0);
+}
+
+void __init cellvision_mac_setup(void)
+{
+ u8 mac_base[6];
+ int err;
+
+ err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET,
+ CELLVISION_CONFIG_SIZE, mac_base);
+
+ if ((err) || !is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+void __init cas6xx_flash_setup(void)
+{
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+ adm5120_flash0_data.parts = cas6xx_partitions;
+
+ cellvision_flash_setup();
+}
+
+void __init cas7xx_flash_setup(void)
+{
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+ adm5120_flash0_data.parts = cas7xx_partitions;
+
+ cellvision_flash_setup();
+}
+
+void __init cas6xx_setup(void)
+{
+ cas6xx_flash_setup();
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+ adm5120_add_device_switch(1, NULL);
+}
+
+MIPS_MACHINE(MACH_ADM5120_CAS630, "CAS-630", "Cellvision CAS-630/630W",
+ cas6xx_setup);
+MIPS_MACHINE(MACH_ADM5120_CAS670, "CAS-670", "Cellvision CAS-670/670W",
+ cas6xx_setup);
+
+void __init cas7xx_setup(void)
+{
+ cas7xx_flash_setup();
+ cellvision_mac_setup();
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+ adm5120_add_device_switch(1, NULL);
+}
+
+MIPS_MACHINE(MACH_ADM5120_CAS700, "CAS-700", "Cellvision CAS-700/700W",
+ cas7xx_setup);
+MIPS_MACHINE(MACH_ADM5120_CAS790, "CAS-790", "Cellvision CAS-790",
+ cas7xx_setup);
+MIPS_MACHINE(MACH_ADM5120_CAS861, "CAS-861", "Cellvision CAS-861/861W",
+ cas7xx_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h
new file mode 100644
index 0000000000..2b55ebf761
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h
@@ -0,0 +1,28 @@
+/*
+ * Cellvision/SparkLAN boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+extern void cellvision_mac_setup(void) __init;
+
+extern void cas6xx_flash_setup(void) __init;
+extern void cas7xx_flash_setup(void) __init;
+extern void cas6xx_setup(void) __init;
+extern void cas7xx_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c
new file mode 100644
index 0000000000..7d214c0909
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c
@@ -0,0 +1,47 @@
+/*
+ * Cellvision/SparkLAN NFS-101U/WU support
+ *
+ * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static struct adm5120_pci_irq nfs101_pci_irqs[] __initdata = {
+ /* miniPCI slot */
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+
+ /* ALi USB controller */
+ PCIIRQ(3, 0, 2, ADM5120_IRQ_PCI2),
+ PCIIRQ(3, 3, 1, ADM5120_IRQ_PCI1),
+
+ /* NEC USB controller */
+ PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
+ PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI2),
+ PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2),
+};
+
+static u8 nfs101_vlans[6] __initdata = {
+ /* FIXME: not tested */
+ 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init nfs101_setup(void)
+{
+ cas6xx_flash_setup();
+ cellvision_mac_setup();
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+ adm5120_add_device_switch(1, nfs101_vlans);
+
+ adm5120_pci_set_irq_map(ARRAY_SIZE(nfs101_pci_irqs),
+ nfs101_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_NFS101U, "NFS-101U", "Cellvision NFS-101U/101WU",
+ nfs101_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile
new file mode 100644
index 0000000000..8d302c5931
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Infineon/ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y := adm5120.o setup.o prom.o irq.o memory.o clock.o \
+ gpio.o platform.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early-printk.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c
new file mode 100644
index 0000000000..28388342c6
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+unsigned int adm5120_product_code;
+unsigned int adm5120_revision;
+unsigned int adm5120_package;
+unsigned int adm5120_nand_boot;
+unsigned long adm5120_speed;
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
+
+void adm5120_ndelay(u32 ns)
+{
+ u32 t;
+
+ SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+ SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+
+ t = (ns+640) / 640;
+ t &= TIMER_PERIOD_MASK;
+ SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
+
+ /* wait until the timer expires */
+ do {
+ t = SW_READ_REG(SWITCH_REG_TIMER_INT);
+ } while ((t & TIMER_INT_TOS) == 0);
+
+ /* leave the timer disabled */
+ SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+ SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+}
+
+void __init adm5120_soc_init(void)
+{
+ u32 code;
+ u32 clks;
+
+ code = SW_READ_REG(SWITCH_REG_CODE);
+
+ adm5120_product_code = CODE_GET_PC(code);
+ adm5120_revision = CODE_GET_REV(code);
+ adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+ ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
+ adm5120_nand_boot = CODE_GET_NAB(code);
+
+ clks = CODE_GET_CLKS(code);
+ adm5120_speed = ADM5120_SPEED_175;
+ if (clks & 1)
+ adm5120_speed += 25000000;
+ if (clks & 2)
+ adm5120_speed += 50000000;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c
new file mode 100644
index 0000000000..52ae64c419
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c
@@ -0,0 +1,65 @@
+/*
+ * ADM5120 minimal CLK API implementation
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was based on the CLK API implementation in:
+ * arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+struct clk {
+ unsigned long rate;
+};
+
+static struct clk uart_clk = {
+ .rate = ADM5120_UART_CLOCK
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ const char *name = dev_name(dev);
+
+ if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
+ return &uart_clk;
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c
new file mode 100644
index 0000000000..d900712639
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c
@@ -0,0 +1,31 @@
+/*
+ * ADM5120 specific early printk support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_uart.h>
+
+#define UART_READ(r) \
+ __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
+#define UART_WRITE(r, v) \
+ __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
+
+void __init prom_putchar(char ch)
+{
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
+ ;
+ UART_WRITE(UART_REG_DATA, ch);
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
+ ;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c
new file mode 100644
index 0000000000..e60ed7ad01
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c
@@ -0,0 +1,330 @@
+/*
+ * ADM5120 generic GPIO API support via GPIOLIB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
+
+struct gpio1_desc {
+ void __iomem *reg; /* register address */
+ u8 iv_shift; /* shift amount for input bit */
+ u8 mode_shift; /* shift amount for mode bits */
+};
+
+#define GPIO1_DESC(p, l) { \
+ .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)), \
+ .iv_shift = LED0_IV_SHIFT + (l), \
+ .mode_shift = (l) * 4 \
+ }
+
+static struct gpio1_desc gpio1_table[15] = {
+ GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
+ GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
+ GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
+ GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
+ GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
+};
+
+static u32 gpio_conf2;
+
+int adm5120_gpio_to_irq(unsigned gpio)
+{
+ int ret;
+
+ switch (gpio) {
+ case ADM5120_GPIO_PIN2:
+ ret = ADM5120_IRQ_GPIO2;
+ break;
+ case ADM5120_GPIO_PIN4:
+ ret = ADM5120_IRQ_GPIO4;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(adm5120_gpio_to_irq);
+
+int adm5120_irq_to_gpio(unsigned irq)
+{
+ int ret;
+
+ switch (irq) {
+ case ADM5120_IRQ_GPIO2:
+ ret = ADM5120_GPIO_PIN2;
+ break;
+ case ADM5120_IRQ_GPIO4:
+ ret = ADM5120_GPIO_PIN4;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(adm5120_irq_to_gpio);
+
+/*
+ * Helpers for GPIO lines in GPIO_CONF0 register
+ */
+#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p)
+#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p)
+#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p)
+#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p)
+
+int __adm5120_gpio0_get_value(unsigned offset)
+{
+ void __iomem **reg;
+ u32 t;
+
+ reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+ t = __raw_readl(reg);
+ if ((t & PIN_IM(offset)) != 0)
+ t &= PIN_IV(offset);
+ else
+ t &= PIN_OV(offset);
+
+ return (t) ? 1 : 0;
+}
+EXPORT_SYMBOL(__adm5120_gpio0_get_value);
+
+void __adm5120_gpio0_set_value(unsigned offset, int value)
+{
+ void __iomem **reg;
+ u32 t;
+
+ reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+ t = __raw_readl(reg);
+ if (value == 0)
+ t &= ~(PIN_OV(offset));
+ else
+ t |= PIN_OV(offset);
+
+ __raw_writel(t, reg);
+}
+EXPORT_SYMBOL(__adm5120_gpio0_set_value);
+
+static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return __adm5120_gpio0_get_value(offset);
+}
+
+static void adm5120_gpio0_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ __adm5120_gpio0_set_value(offset, value);
+}
+
+static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ void __iomem **reg;
+ u32 t;
+
+ reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+ t = __raw_readl(reg);
+ t &= ~(PIN_OE(offset));
+ t |= PIN_IM(offset);
+ __raw_writel(t, reg);
+
+ return 0;
+}
+
+static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem **reg;
+ u32 t;
+
+ reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+ t = __raw_readl(reg);
+ t &= ~(PIN_IM(offset) | PIN_OV(offset));
+ t |= PIN_OE(offset);
+
+ if (value)
+ t |= PIN_OV(offset);
+
+ __raw_writel(t, reg);
+
+ return 0;
+}
+
+static struct gpio_chip adm5120_gpio0_chip = {
+ .label = "adm5120 gpio0",
+ .get = adm5120_gpio0_get_value,
+ .set = adm5120_gpio0_set_value,
+ .direction_input = adm5120_gpio0_direction_input,
+ .direction_output = adm5120_gpio0_direction_output,
+ .base = ADM5120_GPIO_PIN0,
+ .ngpio = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
+};
+
+int __adm5120_gpio1_get_value(unsigned offset)
+{
+ void __iomem **reg;
+ u32 t, m;
+
+ reg = gpio1_table[offset].reg;
+
+ t = __raw_readl(reg);
+ m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
+ if (m == LED_MODE_INPUT)
+ return (t >> gpio1_table[offset].iv_shift) & 1;
+
+ if (m == LED_MODE_OUT_LOW)
+ return 0;
+
+ return 1;
+}
+EXPORT_SYMBOL(__adm5120_gpio1_get_value);
+
+void __adm5120_gpio1_set_value(unsigned offset, int value)
+{
+ void __iomem **reg;
+ u32 t, s;
+
+ reg = gpio1_table[offset].reg;
+ s = gpio1_table[offset].mode_shift;
+
+ t = __raw_readl(reg);
+ t &= ~(LED_MODE_MASK << s);
+
+ switch (value) {
+ case ADM5120_GPIO_LOW:
+ t |= (LED_MODE_OUT_LOW << s);
+ break;
+ case ADM5120_GPIO_FLASH:
+ case ADM5120_GPIO_LINK:
+ case ADM5120_GPIO_SPEED:
+ case ADM5120_GPIO_DUPLEX:
+ case ADM5120_GPIO_ACT:
+ case ADM5120_GPIO_COLL:
+ case ADM5120_GPIO_LINK_ACT:
+ case ADM5120_GPIO_DUPLEX_COLL:
+ case ADM5120_GPIO_10M_ACT:
+ case ADM5120_GPIO_100M_ACT:
+ t |= ((value & LED_MODE_MASK) << s);
+ break;
+ default:
+ t |= (LED_MODE_OUT_HIGH << s);
+ break;
+ }
+
+ __raw_writel(t, reg);
+}
+EXPORT_SYMBOL(__adm5120_gpio1_set_value);
+
+static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return __adm5120_gpio1_get_value(offset);
+}
+
+static void adm5120_gpio1_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ __adm5120_gpio1_set_value(offset, value);
+}
+
+static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ void __iomem **reg;
+ u32 t;
+
+ reg = gpio1_table[offset].reg;
+ t = __raw_readl(reg);
+ t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
+ __raw_writel(t, reg);
+
+ return 0;
+}
+
+static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ __adm5120_gpio1_set_value(offset, value);
+ return 0;
+}
+
+static struct gpio_chip adm5120_gpio1_chip = {
+ .label = "adm5120 gpio1",
+ .get = adm5120_gpio1_get_value,
+ .set = adm5120_gpio1_set_value,
+ .direction_input = adm5120_gpio1_direction_input,
+ .direction_output = adm5120_gpio1_direction_output,
+ .base = ADM5120_GPIO_P0L0,
+ .ngpio = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
+};
+
+void __init adm5120_gpio_csx0_enable(void)
+{
+ gpio_conf2 |= GPIO_CONF2_CSX0;
+ SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
+
+ gpio_request(ADM5120_GPIO_PIN1, "CSX0");
+}
+
+void __init adm5120_gpio_csx1_enable(void)
+{
+ gpio_conf2 |= GPIO_CONF2_CSX1;
+ SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
+
+ gpio_request(ADM5120_GPIO_PIN3, "CSX1");
+}
+
+void __init adm5120_gpio_ew_enable(void)
+{
+ gpio_conf2 |= GPIO_CONF2_EW;
+ SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
+
+ gpio_request(ADM5120_GPIO_PIN0, "EW");
+}
+
+void __init adm5120_gpio_init(void)
+{
+ int err;
+
+ SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
+
+ if (adm5120_package_pqfp()) {
+ gpiochip_reserve(ADM5120_GPIO_PIN4, 4);
+ adm5120_gpio0_chip.ngpio = 4;
+ }
+
+ err = gpiochip_add(&adm5120_gpio0_chip);
+ if (err)
+ panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
+
+ err = gpiochip_add(&adm5120_gpio1_chip);
+ if (err)
+ panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
+
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c
new file mode 100644
index 0000000000..a26e65176e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c
@@ -0,0 +1,171 @@
+/*
+ * ADM5120 specific interrupt handlers
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+static void adm5120_intc_irq_unmask(struct irq_data *d);
+static void adm5120_intc_irq_mask(struct irq_data *d);
+static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type);
+
+static inline void intc_write_reg(unsigned int reg, u32 val)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
+
+ __raw_writel(val, base + reg);
+}
+
+static inline u32 intc_read_reg(unsigned int reg)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
+
+ return __raw_readl(base + reg);
+}
+
+static struct irq_chip adm5120_intc_irq_chip = {
+ .name = "INTC",
+ .irq_unmask = adm5120_intc_irq_unmask,
+ .irq_mask = adm5120_intc_irq_mask,
+ .irq_mask_ack = adm5120_intc_irq_mask,
+ .irq_set_type = adm5120_intc_irq_set_type
+};
+
+static struct irqaction adm5120_intc_irq_action = {
+ .handler = no_action,
+ .name = "cascade [INTC]"
+};
+
+static void adm5120_intc_irq_unmask(struct irq_data *d)
+{
+ intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
+}
+
+static void adm5120_intc_irq_mask(struct irq_data *d)
+{
+ intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
+}
+
+static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ unsigned int irq = d->irq;
+ unsigned int sense;
+ unsigned long mode;
+ int err = 0;
+
+ sense = flow_type & (IRQ_TYPE_SENSE_MASK);
+ switch (sense) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_LEVEL_HIGH:
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ switch (irq) {
+ case ADM5120_IRQ_GPIO2:
+ case ADM5120_IRQ_GPIO4:
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ if (err)
+ return err;
+
+ switch (irq) {
+ case ADM5120_IRQ_GPIO2:
+ case ADM5120_IRQ_GPIO4:
+ mode = intc_read_reg(INTC_REG_INT_MODE);
+ if (sense == IRQ_TYPE_LEVEL_LOW)
+ mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
+ else
+ mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
+
+ intc_write_reg(INTC_REG_INT_MODE, mode);
+ break;
+ }
+
+ return 0;
+}
+
+static void adm5120_intc_irq_dispatch(void)
+{
+ unsigned long status;
+ int irq;
+
+ status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
+ if (status) {
+ irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
+ do_IRQ(irq);
+ } else
+ spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned long pending;
+
+ pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+ if (pending & STATUSF_IP7)
+ do_IRQ(ADM5120_IRQ_COUNTER);
+ else if (pending & STATUSF_IP2)
+ adm5120_intc_irq_dispatch();
+ else
+ spurious_interrupt();
+}
+
+#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
+static void __init adm5120_intc_irq_init(void)
+{
+ int i;
+
+ /* disable all interrupts */
+ intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
+
+ /* setup all interrupts to generate IRQ instead of FIQ */
+ intc_write_reg(INTC_REG_INT_MODE, 0);
+
+ /* set active level for all external interrupts to HIGH */
+ intc_write_reg(INTC_REG_INT_LEVEL, 0);
+
+ /* disable usage of the TEST_SOURCE register */
+ intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
+
+ for (i = ADM5120_INTC_IRQ_BASE;
+ i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
+ i++) {
+ irq_set_chip_and_handler(i, &adm5120_intc_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ adm5120_intc_irq_init();
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c
new file mode 100644
index 0000000000..d07266fa38
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+
+#ifdef DEBUG
+# define mem_dbg(f, a...) printk(KERN_INFO "mem_detect: " f, ## a)
+#else
+# define mem_dbg(f, a...)
+#endif
+
+unsigned long adm5120_memsize;
+
+#define MEM_READL(a) __raw_readl((void __iomem *)(a))
+#define MEM_WRITEL(a, v) __raw_writel((v), (void __iomem *)(a))
+
+static int __init mem_check_pattern(u8 *addr, unsigned long offs)
+{
+ u32 *p1 = (u32 *)addr;
+ u32 *p2 = (u32 *)(addr+offs);
+ u32 t, u, v;
+
+ /* save original value */
+ t = MEM_READL(p1);
+
+ u = MEM_READL(p2);
+ if (t != u)
+ return 0;
+
+ v = 0x55555555;
+ if (u == v)
+ v = 0xAAAAAAAA;
+
+ mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
+
+ MEM_WRITEL(p1, v);
+ adm5120_ndelay(1000);
+ u = MEM_READL(p2);
+
+ mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
+
+ /* restore original value */
+ MEM_WRITEL(p1, t);
+
+ return (v == u);
+}
+
+static void __init adm5120_detect_memsize(void)
+{
+ u32 memctrl;
+ u32 size, maxsize;
+ u8 *p;
+
+ memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
+ switch (memctrl & MEMCTRL_SDRS_MASK) {
+ case MEMCTRL_SDRS_4M:
+ maxsize = 4 << 20;
+ break;
+ case MEMCTRL_SDRS_8M:
+ maxsize = 8 << 20;
+ break;
+ case MEMCTRL_SDRS_16M:
+ maxsize = 16 << 20;
+ break;
+ default:
+ maxsize = 64 << 20;
+ break;
+ }
+
+ mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
+
+ /* detect size of the 1st SDRAM bank */
+ p = (u8 *)KSEG1ADDR(0);
+ for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
+ if (mem_check_pattern(p, size)) {
+ /* mirrored address */
+ mem_dbg("mirrored data found at offset 0x%08X\n", size);
+ break;
+ }
+ }
+
+ mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
+ adm5120_memsize = size;
+
+ if (size != maxsize)
+ /* 2nd bank is not supported */
+ goto out;
+
+ if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
+ /* 2nd bank is disabled */
+ goto out;
+
+ /*
+ * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
+ * are missing.
+ */
+ mem_dbg("check presence of 2nd bank\n");
+
+ p = (u8 *)KSEG1ADDR(maxsize+size-4);
+ if (mem_check_pattern(p, 0))
+ adm5120_memsize += size;
+
+ if (maxsize != size) {
+ /* adjusting MECTRL register */
+ memctrl &= ~(MEMCTRL_SDRS_MASK);
+ switch (size>>20) {
+ case 4:
+ memctrl |= MEMCTRL_SDRS_4M;
+ break;
+ case 8:
+ memctrl |= MEMCTRL_SDRS_8M;
+ break;
+ case 16:
+ memctrl |= MEMCTRL_SDRS_16M;
+ break;
+ default:
+ memctrl |= MEMCTRL_SDRS_64M;
+ break;
+ }
+ SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
+ }
+
+out:
+ mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
+ size>>20);
+}
+
+void __init adm5120_mem_init(void)
+{
+ adm5120_detect_memsize();
+ add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c
new file mode 100644
index 0000000000..bdbfbcbae5
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c
@@ -0,0 +1,375 @@
+/*
+ * ADM5120 generic platform devices
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_nand.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#if 1
+/*
+ * TODO:remove global adm5120_eth* variables when the switch driver will be
+ * converted into a real platform driver
+ */
+unsigned int adm5120_eth_num_ports = 6;
+EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
+
+unsigned char adm5120_eth_macs[6][6] = {
+ {'\00', 'A', 'D', 'M', '\x51', '\x20' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x21' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x22' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x23' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x24' },
+ {'\00', 'A', 'D', 'M', '\x51', '\x25' }
+};
+EXPORT_SYMBOL_GPL(adm5120_eth_macs);
+
+unsigned char adm5120_eth_vlans[6] = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
+};
+EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
+#endif
+
+void __init adm5120_setup_eth_macs(u8 *mac_base)
+{
+ u32 t;
+ int i, j;
+
+ t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
+ | ((u32) mac_base[5]);
+
+ for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
+ for (j = 0; j < 3; j++)
+ adm5120_eth_macs[i][j] = mac_base[j];
+
+ adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
+ adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
+ adm5120_eth_macs[i][5] = t & 0xff;
+
+ t++;
+ }
+}
+
+/*
+ * Built-in ethernet switch
+ */
+struct resource adm5120_switch_resources[] = {
+ [0] = {
+ .start = ADM5120_SWITCH_BASE,
+ .end = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ADM5120_IRQ_SWITCH,
+ .end = ADM5120_IRQ_SWITCH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct adm5120_switch_platform_data adm5120_switch_data;
+struct platform_device adm5120_switch_device = {
+ .name = "adm5120-switch",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adm5120_switch_resources),
+ .resource = adm5120_switch_resources,
+ .dev.platform_data = &adm5120_switch_data,
+};
+
+void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map)
+{
+ if (num_ports > 0)
+ adm5120_eth_num_ports = num_ports;
+
+ if (vlan_map)
+ memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans));
+
+ platform_device_register(&adm5120_switch_device);
+}
+
+/*
+ * USB Host Controller
+ */
+struct resource adm5120_hcd_resources[] = {
+ [0] = {
+ .start = ADM5120_USBC_BASE,
+ .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ADM5120_IRQ_USBC,
+ .end = ADM5120_IRQ_USBC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
+struct platform_device adm5120_hcd_device = {
+ .name = "adm5120-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
+ .resource = adm5120_hcd_resources,
+ .dev = {
+ .dma_mask = &adm5120_hcd_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(24),
+ }
+};
+
+void __init adm5120_add_device_usb(void)
+{
+ platform_device_register(&adm5120_hcd_device);
+}
+
+/*
+ * NOR flash devices
+ */
+struct adm5120_flash_platform_data adm5120_flash0_data;
+struct platform_device adm5120_flash0_device = {
+ .name = "adm5120-flash",
+ .id = 0,
+ .dev.platform_data = &adm5120_flash0_data,
+};
+
+struct adm5120_flash_platform_data adm5120_flash1_data;
+struct platform_device adm5120_flash1_device = {
+ .name = "adm5120-flash",
+ .id = 1,
+ .dev.platform_data = &adm5120_flash1_data,
+};
+
+void __init adm5120_add_device_flash(unsigned id)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0:
+ pdev = &adm5120_flash0_device;
+ break;
+ case 1:
+ pdev = &adm5120_flash1_device;
+ break;
+ default:
+ pdev = NULL;
+ break;
+ }
+
+ if (pdev)
+ platform_device_register(pdev);
+}
+
+/*
+ * built-in UARTs
+ */
+static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+ unsigned int mctrl)
+{
+}
+
+struct amba_pl010_data adm5120_uart0_data = {
+ .set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart0_device = {
+ .dev = {
+ .init_name = "apb:uart0",
+ .platform_data = &adm5120_uart0_data,
+ },
+ .res = {
+ .start = ADM5120_UART0_BASE,
+ .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { ADM5120_IRQ_UART0, 0 },
+ .periphid = 0x0041010,
+};
+
+struct amba_pl010_data adm5120_uart1_data = {
+ .set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart1_device = {
+ .dev = {
+ .init_name = "apb:uart1",
+ .platform_data = &adm5120_uart1_data,
+ },
+ .res = {
+ .start = ADM5120_UART1_BASE,
+ .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { ADM5120_IRQ_UART1, 0 },
+ .periphid = 0x0041010,
+};
+
+void __init adm5120_add_device_uart(unsigned id)
+{
+ struct amba_device *dev;
+
+ switch (id) {
+ case 0:
+ dev = &adm5120_uart0_device;
+ break;
+ case 1:
+ dev = &adm5120_uart1_device;
+ break;
+ default:
+ dev = NULL;
+ break;
+ }
+
+ if (dev)
+ amba_device_register(dev, &iomem_resource);
+}
+
+/*
+ * GPIO buttons
+ */
+void __init adm5120_register_gpio_buttons(int id,
+ unsigned poll_interval,
+ unsigned nbuttons,
+ struct gpio_keys_button *buttons)
+{
+ struct platform_device *pdev;
+ struct gpio_keys_platform_data pdata;
+ struct gpio_keys_button *p;
+ int err;
+
+ p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return;
+
+ pdev = platform_device_alloc("gpio-keys-polled", id);
+ if (!pdev)
+ goto err_free_buttons;
+
+ memset(&pdata, 0, sizeof(pdata));
+ pdata.poll_interval = poll_interval;
+ pdata.nbuttons = nbuttons;
+ pdata.buttons = p;
+
+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (err)
+ goto err_put_pdev;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_put_pdev;
+
+ return;
+
+err_put_pdev:
+ platform_device_put(pdev);
+
+err_free_buttons:
+ kfree(p);
+}
+
+/*
+ * GPIO LEDS
+ */
+struct gpio_led_platform_data adm5120_gpio_leds_data;
+struct platform_device adm5120_gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &adm5120_gpio_leds_data,
+};
+
+void __init adm5120_add_device_gpio_leds(unsigned num_leds,
+ struct gpio_led *leds)
+{
+ struct gpio_led *p;
+
+ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return;
+
+ memcpy(p, leds, num_leds * sizeof(*p));
+ adm5120_gpio_leds_data.num_leds = num_leds;
+ adm5120_gpio_leds_data.leds = p;
+
+ platform_device_register(&adm5120_gpio_leds_device);
+}
+
+/*
+ * NAND flash
+ */
+struct resource adm5120_nand_resources[] = {
+ [0] = {
+ .start = ADM5120_NAND_BASE,
+ .end = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int adm5120_nand_ready(struct mtd_info *mtd)
+{
+ return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
+}
+
+static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ adm5120_nand_set_cle(ctrl & NAND_CLE);
+ adm5120_nand_set_ale(ctrl & NAND_ALE);
+ adm5120_nand_set_cen(ctrl & NAND_NCE);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ NAND_WRITE_REG(NAND_REG_DATA, cmd);
+}
+
+void __init adm5120_add_device_nand(struct platform_nand_data *pdata)
+{
+ struct platform_device *pdev;
+ int err;
+
+ pdev = platform_device_alloc("gen_nand", -1);
+ if (!pdev)
+ goto err_out;
+
+ err = platform_device_add_resources(pdev, adm5120_nand_resources,
+ ARRAY_SIZE(adm5120_nand_resources));
+ if (err)
+ goto err_put;
+
+ err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (err)
+ goto err_put;
+
+ pdata = pdev->dev.platform_data;
+ pdata->ctrl.dev_ready = adm5120_nand_ready;
+ pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_put;
+
+ return;
+
+err_put:
+ platform_device_put(pdev);
+err_out:
+ return;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c
new file mode 100644
index 0000000000..5c52ea27e2
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c
@@ -0,0 +1,264 @@
+/*
+ * ADM5120 specific prom routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#include <prom/cfe.h>
+#include <prom/generic.h>
+#include <prom/routerboot.h>
+#include <prom/myloader.h>
+#include <prom/zynos.h>
+
+unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
+
+struct board_desc {
+ unsigned long mach_type;
+ char *name;
+};
+
+#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
+static struct board_desc common_boards[] __initdata = {
+ /* Cellvision/SparkLAN boards */
+ DEFBOARD("CAS-630", MACH_ADM5120_CAS630),
+ DEFBOARD("CAS-670", MACH_ADM5120_CAS670),
+ DEFBOARD("CAS-700", MACH_ADM5120_CAS700),
+ DEFBOARD("CAS-771", MACH_ADM5120_CAS771),
+ DEFBOARD("CAS-790", MACH_ADM5120_CAS790),
+ DEFBOARD("CAS-861", MACH_ADM5120_CAS861),
+ DEFBOARD("NFS-101U", MACH_ADM5120_NFS101U),
+ /* Compex boards */
+ DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT),
+ /* Edimax boards */
+ DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K),
+ DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104KP),
+ DEFBOARD("BR-6104WG", MACH_ADM5120_BR61X4WG),
+ DEFBOARD("BR-6114WG", MACH_ADM5120_BR61X4WG),
+ /* Infineon boards */
+ DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA),
+ DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT),
+ DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP),
+ DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000),
+ /* Mikrotik RouterBOARDs */
+ DEFBOARD("111", MACH_ADM5120_RB_11X),
+ DEFBOARD("112", MACH_ADM5120_RB_11X),
+ DEFBOARD("133", MACH_ADM5120_RB_133),
+ DEFBOARD("133C", MACH_ADM5120_RB_133C),
+ DEFBOARD("133C3", MACH_ADM5120_RB_133C),
+ DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */
+ DEFBOARD("153", MACH_ADM5120_RB_153),
+ DEFBOARD("192", MACH_ADM5120_RB_192),
+ DEFBOARD("miniROUTER", MACH_ADM5120_RB_150),
+ /* OSBRiDGE boards */
+ DEFBOARD("OSBRiDGE 5GXi", MACH_ADM5120_5GXI),
+ /* Motorola boards */
+ DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW),
+ /* Generic EB-214A */
+ DEFBOARD("ADM5120", MACH_ADM5120_EB_214A),
+};
+
+static unsigned long __init find_machtype_byname(char *name)
+{
+ unsigned long ret;
+ int i;
+
+ ret = MACH_ADM5120_GENERIC;
+ if (name == NULL)
+ goto out;
+
+ if (*name == '\0')
+ goto out;
+
+ for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
+ if (strcmp(common_boards[i].name, name) == 0) {
+ ret = common_boards[i].mach_type;
+ break;
+ }
+ }
+
+out:
+ return ret;
+}
+
+static unsigned long __init detect_machtype_routerboot(void)
+{
+ char *name;
+
+ name = routerboot_get_boardname();
+ return find_machtype_byname(name);
+}
+
+static unsigned long __init detect_machtype_generic(void)
+{
+ char *name;
+
+ name = generic_prom_getenv("board_name");
+ return find_machtype_byname(name);
+}
+
+unsigned long __init detect_machtype_cfe(void)
+{
+ char *name;
+
+ name = cfe_getenv("BOARD_NAME");
+ return find_machtype_byname(name);
+}
+
+static struct {
+ unsigned long mach_type;
+ u16 vendor_id;
+ u16 board_id;
+} zynos_boards[] __initdata = {
+#define ZYNOS_BOARD(vi, bi, mt) \
+ {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
+
+#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
+#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
+#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
+ ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
+ ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT, MACH_ADM5120_P334WT),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
+ ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U)
+};
+
+static unsigned long __init detect_machtype_bootbase(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
+ if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
+ zynos_boards[i].board_id == bootbase_info.board_id) {
+ return zynos_boards[i].mach_type;
+ break;
+ }
+ }
+
+ printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
+ bootbase_info.board_id);
+ return MACH_ADM5120_GENERIC;
+}
+
+static struct {
+ unsigned long mach_type;
+ u16 vid;
+ u16 did;
+ u16 svid;
+ u16 sdid;
+} mylo_boards[] __initdata = {
+#define MYLO_BOARD(v, d, sv, sd, mt) \
+ {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
+#define COMPEX_BOARD(d, mt) \
+ MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
+
+ COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
+ COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
+ COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
+ COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54),
+ COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
+ COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54),
+ COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WP54),
+ COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WP54),
+};
+
+static unsigned long __init detect_machtype_myloader(void)
+{
+ unsigned long ret;
+ int i;
+
+ ret = MACH_ADM5120_GENERIC;
+ for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
+ if (mylo_boards[i].vid == myloader_info.vid &&
+ mylo_boards[i].did == myloader_info.did &&
+ mylo_boards[i].svid == myloader_info.svid &&
+ mylo_boards[i].sdid == myloader_info.sdid) {
+ ret = mylo_boards[i].mach_type;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static void __init prom_detect_machtype(void)
+{
+ if (bootbase_present()) {
+ adm5120_prom_type = ADM5120_PROM_BOOTBASE;
+ mips_machtype = detect_machtype_bootbase();
+ return;
+ }
+
+ if (cfe_present()) {
+ adm5120_prom_type = ADM5120_PROM_CFE;
+ mips_machtype = detect_machtype_cfe();
+ return;
+ }
+
+ if (myloader_present()) {
+ adm5120_prom_type = ADM5120_PROM_MYLOADER;
+ mips_machtype = detect_machtype_myloader();
+ return;
+ }
+
+ if (routerboot_present()) {
+ adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
+ mips_machtype = detect_machtype_routerboot();
+ return;
+ }
+
+ if (generic_prom_present()) {
+ adm5120_prom_type = ADM5120_PROM_GENERIC;
+ mips_machtype = detect_machtype_generic();
+ return;
+ }
+
+ mips_machtype = MACH_ADM5120_GENERIC;
+}
+
+#ifdef CONFIG_IMAGE_CMDLINE_HACK
+extern char __image_cmdline[];
+
+static void __init prom_init_cmdline(void)
+{
+ char *cmd;
+
+ /* init command line, register a default kernel command line */
+ cmd = __image_cmdline;
+ if (strlen(cmd) > 0)
+ strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline));
+
+}
+#else
+static inline void prom_init_cmdline(void) {}
+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
+
+void __init prom_init(void)
+{
+ prom_detect_machtype();
+ prom_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* We do not have to prom memory to free */
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c
new file mode 100644
index 0000000000..c4be845170
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c
@@ -0,0 +1,128 @@
+/*
+ * ADM5120 specific setup
+ *
+ * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
+ * done by Jeroen Vreeken
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * Jeroen's code was based on the Linux 2.4.xx source codes found in various
+ * tarballs released by Edimax for it's ADM5120 based devices
+ * Copyright (C) ADMtek Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#define ADM5120_SYS_TYPE_LEN 64
+
+unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN];
+void (*adm5120_board_reset)(void);
+
+static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
+ [ADM5120_PROM_GENERIC] = "Generic",
+ [ADM5120_PROM_CFE] = "CFE",
+ [ADM5120_PROM_UBOOT] = "U-Boot",
+ [ADM5120_PROM_MYLOADER] = "MyLoader",
+ [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT",
+ [ADM5120_PROM_BOOTBASE] = "Bootbase"
+};
+
+static void __init adm5120_report(void)
+{
+ printk(KERN_INFO "SoC : %s\n", adm5120_sys_type);
+ printk(KERN_INFO "Bootdev : %s flash\n",
+ adm5120_nand_boot ? "NAND" : "NOR");
+ printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]);
+}
+
+const char *get_system_type(void)
+{
+ return adm5120_sys_type;
+}
+
+static void adm5120_restart(char *command)
+{
+ /* TODO: stop switch before reset */
+
+ if (adm5120_board_reset)
+ adm5120_board_reset();
+
+ SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
+}
+
+static void adm5120_halt(void)
+{
+ local_irq_disable();
+
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = adm5120_speed / 2;
+}
+
+void __init plat_mem_setup(void)
+{
+ adm5120_soc_init();
+ adm5120_mem_init();
+
+ sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz",
+ adm5120_product_code,
+ adm5120_package_bga() ? "" : "P",
+ adm5120_revision,
+ (adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000);
+
+ adm5120_report();
+
+ _machine_restart = adm5120_restart;
+ _machine_halt = adm5120_halt;
+ pm_power_off = adm5120_halt;
+
+ set_io_port_base(KSEG1);
+}
+
+static int __init adm5120_board_setup(void)
+{
+ adm5120_gpio_init();
+
+ mips_machine_setup();
+
+ return 0;
+}
+arch_initcall(adm5120_board_setup);
+
+static void __init adm5120_generic_board_setup(void)
+{
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_add_device_flash(0);
+ adm5120_add_device_switch(6, NULL);
+}
+
+MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board",
+ adm5120_generic_board_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile
new file mode 100644
index 0000000000..8c66c171e7
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile
@@ -0,0 +1,5 @@
+obj-y += compex.o
+
+obj-$(CONFIG_ADM5120_MACH_NP27G) += np27g.o
+obj-$(CONFIG_ADM5120_MACH_NP28G) += np28g.o
+obj-$(CONFIG_ADM5120_MACH_WP54) += wp54.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c
new file mode 100644
index 0000000000..814acfb0cf
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c
@@ -0,0 +1,60 @@
+/*
+ * Compex boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "compex.h"
+
+#include <asm/mach-adm5120/prom/myloader.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+void __init compex_mac_setup(void)
+{
+ if (myloader_present()) {
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ if (is_valid_ether_addr(myloader_info.macs[i]))
+ memcpy(adm5120_eth_macs[i],
+ myloader_info.macs[i], ETH_ALEN);
+ else
+ random_ether_addr(adm5120_eth_macs[i]);
+ }
+ } else {
+ u8 mac[ETH_ALEN];
+
+ random_ether_addr(mac);
+ adm5120_setup_eth_macs(mac);
+ }
+}
+
+void __init compex_generic_setup(void)
+{
+ gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+ gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_add_device_flash(0);
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ compex_mac_setup();
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h
new file mode 100644
index 0000000000..124e676971
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h
@@ -0,0 +1,23 @@
+/*
+ * Compex boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+extern void compex_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c
new file mode 100644
index 0000000000..82da46d1c7
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c
@@ -0,0 +1,28 @@
+/*
+ * Compex NP27G board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "compex.h"
+
+static u8 np27g_vlans[6] __initdata = {
+ /* FIXME: untested */
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init np27g_setup(void)
+{
+ compex_generic_setup();
+ adm5120_add_device_switch(5, np27g_vlans);
+ adm5120_add_device_usb();
+
+ /* TODO: add PCI IRQ map */
+}
+
+MIPS_MACHINE(MACH_ADM5120_NP27G, "NP27G", "Compex NetPassage 27G", np27g_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c
new file mode 100644
index 0000000000..a541439998
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c
@@ -0,0 +1,63 @@
+/*
+ * Compex NP28G board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "compex.h"
+
+static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+ PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
+ PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
+ PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+static struct gpio_led np28g_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN3, "power", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
+};
+
+static u8 np28g_vlans[6] __initdata = {
+ 0x50, 0x42, 0x44, 0x48, 0x00, 0x00
+};
+
+static void np28g_reset(void)
+{
+ gpio_set_value(ADM5120_GPIO_PIN4, 0);
+}
+
+static void __init np28g_setup(void)
+{
+ compex_generic_setup();
+
+ /* setup reset line */
+ gpio_request(ADM5120_GPIO_PIN4, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN4, 1);
+ adm5120_board_reset = np28g_reset;
+
+ adm5120_add_device_switch(4, np28g_vlans);
+ adm5120_add_device_usb();
+
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds),
+ np28g_gpio_leds);
+
+ adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_NP28G, "NP28G", "Compex NetPassage 28G", np28g_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c
new file mode 100644
index 0000000000..8aa35c555a
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c
@@ -0,0 +1,95 @@
+/*
+ * Compex WP54 board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "compex.h"
+
+#define WP54_KEYS_POLL_INTERVAL 20
+#define WP54_KEYS_DEBOUNCE_INTERVAL (3 * WP54_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wp54g_wrt_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "trx",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x3A0000,
+ } , {
+ .name = "nvram",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x010000,
+ }
+};
+
+static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static struct gpio_keys_button wp54_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset_button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ADM5120_GPIO_PIN4,
+ }
+};
+
+static struct gpio_led wp54_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
+};
+
+static u8 wp54_vlans[6] __initdata = {
+ 0x41, 0x42, 0x00, 0x00, 0x00, 0x00
+};
+
+static void wp54_reset(void)
+{
+ gpio_set_value(ADM5120_GPIO_PIN3, 0);
+}
+
+static void __init wp54_setup(void)
+{
+ compex_generic_setup();
+
+ /* setup reset line */
+ gpio_request(ADM5120_GPIO_PIN3, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN3, 1);
+ adm5120_board_reset = wp54_reset;
+
+ adm5120_add_device_switch(2, wp54_vlans);
+ adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wp54_gpio_buttons),
+ wp54_gpio_buttons);
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
+ wp54_gpio_leds);
+
+ adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", "Compex WP54 family", wp54_setup);
+
+static void __init wp54_wrt_setup(void)
+{
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
+ adm5120_flash0_data.parts = wp54g_wrt_partitions;
+
+ wp54_setup();
+}
+
+MIPS_MACHINE(MACH_ADM5120_WP54G_WRT, "WP54G-WRT", "Compex WP54G-WRT",
+ wp54_wrt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile
new file mode 100644
index 0000000000..1286ed4c1e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile
@@ -0,0 +1,5 @@
+obj-y := br-61xx.o
+
+obj-$(CONFIG_ADM5120_MACH_BR_6104K) += br-6104k.o
+obj-$(CONFIG_ADM5120_MACH_BR_6104KP) += br-6104kp.o
+obj-$(CONFIG_ADM5120_MACH_BR_61X4WG) += br-61x4wg.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c
new file mode 100644
index 0000000000..8b2b445506
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c
@@ -0,0 +1,36 @@
+/*
+ * Edimax BR-6104K board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "br-61xx.h"
+
+static struct gpio_led br6104k_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
+};
+
+static void __init br6104k_setup(void)
+{
+ br61xx_generic_setup();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104k_gpio_leds),
+ br6104k_gpio_leds);
+}
+
+MIPS_MACHINE(MACH_ADM5120_BR6104K, "BR-6104K", "Edimax BR-6104K",
+ br6104k_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c
new file mode 100644
index 0000000000..034575d6b2
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c
@@ -0,0 +1,39 @@
+/*
+ * Edimax BR-6104KP board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "br-61xx.h"
+
+static struct gpio_led br6104kp_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN3, "usb1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_PIN1, "usb2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
+};
+
+static void __init br6104kp_setup(void)
+{
+ br61xx_generic_setup();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104kp_gpio_leds),
+ br6104kp_gpio_leds);
+ adm5120_add_device_usb();
+}
+
+MIPS_MACHINE(MACH_ADM5120_BR6104KP, "BR-6104KP", "Edimax BR-6104KP",
+ br6104kp_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c
new file mode 100644
index 0000000000..5d57507101
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c
@@ -0,0 +1,43 @@
+/*
+ * Edimax BR-6104Wg/6114WG board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "br-61xx.h"
+
+static struct adm5120_pci_irq br61x4wg_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static struct gpio_led br61x4wg_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
+ GPIO_LED_STD(ADM5120_GPIO_PIN5, "wlan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
+};
+
+static void __init br61x4wg_setup(void)
+{
+ br61xx_generic_setup();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(br61x4wg_gpio_leds),
+ br61x4wg_gpio_leds);
+ adm5120_pci_set_irq_map(ARRAY_SIZE(br61x4wg_pci_irqs),
+ br61x4wg_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_BR61X4WG, "BR-6104WG", "Edimax BR-6104WG/6114WG",
+ br61x4wg_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c
new file mode 100644
index 0000000000..62a1cee384
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c
@@ -0,0 +1,84 @@
+/*
+ * Edimax BR-61xx support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "br-61xx.h"
+
+#include <prom/admboot.h>
+
+#define BR61XX_CONFIG_OFFSET 0x8000
+#define BR61XX_CONFIG_SIZE 0x1000
+
+#define BR61XX_KEYS_POLL_INTERVAL 20
+#define BR61XX_KEYS_DEBOUNCE_INTERVAL (3 * BR61XX_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition br61xx_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset_button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ADM5120_GPIO_PIN2,
+ }
+};
+
+static u8 br61xx_vlans[6] __initdata = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init br61xx_mac_setup(void)
+{
+ u8 mac_base[6];
+ int err;
+
+ err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
+ BR61XX_CONFIG_SIZE, mac_base);
+
+ if ((err) || !is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+void __init br61xx_generic_setup(void)
+{
+
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
+ adm5120_flash0_data.parts = br61xx_partitions;
+ adm5120_add_device_flash(0);
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_add_device_switch(5, br61xx_vlans);
+
+ adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(br61xx_gpio_buttons),
+ br61xx_gpio_buttons);
+
+ br61xx_mac_setup();
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h
new file mode 100644
index 0000000000..c4a9eced56
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h
@@ -0,0 +1,23 @@
+/*
+ * Edimax BR-61xx board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+extern void __init br61xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile
new file mode 100644
index 0000000000..0c032e3a52
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ADM5120_MACH_EB_214A) += eb-214a.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c
new file mode 100644
index 0000000000..cf491a1efc
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c
@@ -0,0 +1,120 @@
+/*
+ * EB-214A board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Cezary Jackiewicz <cezary@eko.one.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+
+#define EB214A_CONFIG_OFFSET 0x4000
+
+#define EB214A_KEYS_POLL_INTERVAL 20
+#define EB214A_KEYS_DEBOUNCE_INTERVAL (3 * EB214A_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition eb214a_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 32*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = {
+ PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0),
+ PCIIRQ(4, 1, 2, ADM5120_IRQ_PCI0),
+ PCIIRQ(4, 2, 3, ADM5120_IRQ_PCI0),
+};
+
+static struct gpio_led eb214a_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN7, "power", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "usb1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "usb2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L2, "usb3", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4", NULL),
+};
+
+static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ADM5120_GPIO_PIN1,
+ }
+};
+
+static u8 eb214a_vlans[6] __initdata = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init eb214a_mac_setup(void)
+{
+ u8 mac_base[6];
+ u8 *cfg;
+ int i;
+
+ cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + EB214A_CONFIG_OFFSET);
+ for (i = 0; i < 6; i++)
+ mac_base[i] = cfg[i];
+
+ if (!is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+static void __init eb214a_setup(void)
+{
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
+ adm5120_flash0_data.parts = eb214a_partitions;
+ adm5120_add_device_flash(0);
+
+ adm5120_add_device_uart(0);
+ /* adm5120_add_device_uart(1); */
+
+ adm5120_add_device_switch(5, eb214a_vlans);
+
+ eb214a_mac_setup();
+
+ adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(eb214a_gpio_buttons),
+ eb214a_gpio_buttons);
+
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds),
+ eb214a_gpio_leds);
+
+ adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
+ eb214a_pci_irqs);
+ /* adm5120_add_device_usb(); */
+}
+
+MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile
new file mode 100644
index 0000000000..49453cba9a
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile
@@ -0,0 +1,6 @@
+obj-y += infineon.o
+
+obj-$(CONFIG_ADM5120_MACH_EASY5120_RT) += easy5120-rt.o
+obj-$(CONFIG_ADM5120_MACH_EASY5120_WVOIP) += easy5120-wvoip.o
+obj-$(CONFIG_ADM5120_MACH_EASY5120P_ATA) += easy5120p-ata.o
+obj-$(CONFIG_ADM5120_MACH_EASY83000) += easy83000.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c
new file mode 100644
index 0000000000..31eaee7721
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c
@@ -0,0 +1,48 @@
+/*
+ * Infineon EASY 5120-RT Reference Board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "infineon.h"
+
+static struct gpio_led easy5120_rt_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN6, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan0_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan0_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
+};
+
+static struct adm5120_pci_irq easy5120_rt_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static u8 easy5120_rt_vlans[6] __initdata = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init easy5120_rt_setup(void)
+{
+ easy_setup_bga();
+
+ adm5120_add_device_switch(5, easy5120_rt_vlans);
+ adm5120_add_device_usb();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds),
+ easy5120_rt_gpio_leds);
+ adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs),
+ easy5120_rt_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_EASY5120RT, "EASY5120-RT",
+ "Infineon EASY 5120-RT Reference Board", easy5120_rt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c
new file mode 100644
index 0000000000..0bf404cc26
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c
@@ -0,0 +1,24 @@
+/*
+ * Infineon EASY 5120-WVoIP Reference Board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "infineon.h"
+
+static void __init easy5120wvoip_setup(void)
+{
+ easy_setup_bga();
+ adm5120_add_device_switch(6, NULL);
+
+ /* TODO: add VINETIC2 device */
+ /* TODO: setup PCI IRQ map */
+}
+
+MIPS_MACHINE(MACH_ADM5120_EASY5120WVOIP, "EASY5120WVoIP",
+ "Infineon EASY 5120-WVoIP Reference Board", easy5120wvoip_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c
new file mode 100644
index 0000000000..fafe0238bd
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c
@@ -0,0 +1,22 @@
+/*
+ * Infineon EASY 5120P-ATA Reference Board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "infineon.h"
+
+static void __init easy5120pata_setup(void)
+{
+ easy_setup_pqfp();
+
+ adm5120_add_device_switch(6, NULL);
+}
+
+MIPS_MACHINE(MACH_ADM5120_EASY5120PATA, "EASY5120P-ATA",
+ "Infineon EASY 5120P-ATA Reference Board", easy5120pata_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c
new file mode 100644
index 0000000000..051b852749
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c
@@ -0,0 +1,23 @@
+/*
+ * Infineon EASY 83000 Reference Board support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "infineon.h"
+
+static void __init easy83000_setup(void)
+{
+ easy_setup_pqfp();
+ adm5120_add_device_switch(6, NULL);
+
+ /* TODO: add VINAX device */
+}
+
+MIPS_MACHINE(MACH_ADM5120_EASY83000, "EASY8300",
+ "Infineon EASY 83000 Reference Board", easy83000_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c
new file mode 100644
index 0000000000..5c441da90e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c
@@ -0,0 +1,108 @@
+/*
+ * Infineon Reference Boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "infineon.h"
+
+#include <prom/admboot.h>
+
+#define EASY_CONFIG_OFFSET 0x10000
+#define EASY_CONFIG_SIZE 0x1000
+
+static struct mtd_partition easy_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "boardcfg",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static __init void easy_setup_mac(void)
+{
+ u8 mac_base[6];
+ int err;
+
+ err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
+ EASY_CONFIG_SIZE, mac_base);
+
+ if ((err) || !is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+static void switch_bank_gpio3(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN3, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN3, 1);
+ break;
+ }
+}
+
+void __init easy_setup_pqfp(void)
+{
+ /* setup flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN3, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN3, 0);
+ adm5120_flash0_data.switch_bank = switch_bank_gpio3;
+
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+ adm5120_flash0_data.parts = easy_partitions;
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_add_device_flash(0);
+
+ easy_setup_mac();
+}
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+void __init easy_setup_bga(void)
+{
+ /* setup flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN5, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+ adm5120_flash0_data.parts = easy_partitions;
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_add_device_flash(0);
+
+ easy_setup_mac();
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h
new file mode 100644
index 0000000000..a5f28b4fec
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h
@@ -0,0 +1,25 @@
+/*
+ * Infineon Reference Boards
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+extern void easy_setup_pqfp(void) __init;
+extern void easy_setup_bga(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile
new file mode 100644
index 0000000000..34ea0a3d88
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile
@@ -0,0 +1,8 @@
+obj-y += rb-1xx.o
+
+obj-${CONFIG_ADM5120_MACH_RB_11X} += rb-11x.o
+obj-${CONFIG_ADM5120_MACH_RB_133} += rb-133.o
+obj-${CONFIG_ADM5120_MACH_RB_133C} += rb-133c.o
+obj-${CONFIG_ADM5120_MACH_RB_150} += rb-150.o
+obj-${CONFIG_ADM5120_MACH_RB_153} += rb-153.o
+obj-${CONFIG_ADM5120_MACH_RB_192} += rb-192.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c
new file mode 100644
index 0000000000..fd768d8ef0
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c
@@ -0,0 +1,35 @@
+/*
+ * Mikrotik RouterBOARD 111/112 support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+static struct gpio_led rb11x_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN3, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact", NULL),
+};
+
+static u8 rb11x_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init rb11x_setup(void)
+{
+ rb1xx_generic_setup();
+ rb1xx_add_device_nand();
+
+ adm5120_add_device_switch(1, rb11x_vlans);
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(rb11x_gpio_leds),
+ rb11x_gpio_leds);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_11X, "11x", "Mikrotik RouterBOARD 111/112",
+ rb11x_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c
new file mode 100644
index 0000000000..23c57820c3
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c
@@ -0,0 +1,40 @@
+/*
+ * Mikrotik RouterBOARD 133 support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+static struct gpio_led rb133_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
+ GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact", NULL),
+};
+
+static u8 rb133_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init rb133_setup(void)
+{
+ rb1xx_generic_setup();
+ rb1xx_add_device_nand();
+
+ adm5120_add_device_switch(3, rb133_vlans);
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133_gpio_leds),
+ rb133_gpio_leds);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_133, "133", "Mikrotik RouterBOARD 133",
+ rb133_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c
new file mode 100644
index 0000000000..25bab70c00
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c
@@ -0,0 +1,36 @@
+/*
+ * Mikrotik RouterBOARD 133C support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+static struct gpio_led rb133c_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
+ GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL),
+};
+
+static u8 rb133c_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init rb133c_setup(void)
+{
+ rb1xx_generic_setup();
+ rb1xx_add_device_nand();
+
+ adm5120_add_device_switch(1, rb133c_vlans);
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133c_gpio_leds),
+ rb133c_gpio_leds);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_133C, "133C", "Mikrotik RouterBOARD 133C",
+ rb133c_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c
new file mode 100644
index 0000000000..96a8c1b87b
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c
@@ -0,0 +1,131 @@
+/*
+ * Mikrotik RouterBOARD 150 support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+#define RB150_NAND_BASE 0x1FC80000
+#define RB150_NAND_SIZE 1
+
+#define RB150_GPIO_NAND_READY ADM5120_GPIO_PIN0
+#define RB150_GPIO_NAND_NCE ADM5120_GPIO_PIN1
+#define RB150_GPIO_NAND_CLE ADM5120_GPIO_P2L2
+#define RB150_GPIO_NAND_ALE ADM5120_GPIO_P3L2
+#define RB150_GPIO_RESET_BUTTON ADM5120_GPIO_PIN1 /* FIXME */
+
+#define RB150_NAND_DELAY 100
+
+#define RB150_NAND_WRITE(v) \
+ writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
+
+static struct resource rb150_nand_resources[] __initdata = {
+ [0] = {
+ .start = RB150_NAND_BASE,
+ .end = RB150_NAND_BASE + RB150_NAND_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct gpio_led rb150_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_P0L2, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_led1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_led2", NULL),
+};
+
+static u8 rb150_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static int rb150_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(RB150_GPIO_NAND_READY);
+}
+
+static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
+ gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
+ gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
+ }
+
+ udelay(RB150_NAND_DELAY);
+
+ if (cmd != NAND_CMD_NONE)
+ RB150_NAND_WRITE(cmd);
+}
+
+static void __init rb150_add_device_nand(void)
+{
+ struct platform_device *pdev;
+ int err;
+
+ /* setup GPIO pins for NAND flash chip */
+ gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
+ gpio_direction_input(RB150_GPIO_NAND_READY);
+ gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
+ gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
+ gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
+ gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
+ gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
+ gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
+
+ pdev = platform_device_alloc("gen_nand", -1);
+ if (!pdev)
+ goto err_out;
+
+ err = platform_device_add_resources(pdev, rb150_nand_resources,
+ ARRAY_SIZE(rb150_nand_resources));
+ if (err)
+ goto err_put;
+
+
+ rb1xx_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
+ rb1xx_nand_data.ctrl.dev_ready = rb150_nand_dev_ready;
+
+ err = platform_device_add_data(pdev, &rb1xx_nand_data,
+ sizeof(rb1xx_nand_data));
+ if (err)
+ goto err_put;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_put;
+
+ return;
+
+err_put:
+ platform_device_put(pdev);
+err_out:
+ return;
+}
+
+static void __init rb150_setup(void)
+{
+ rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON;
+ rb1xx_generic_setup();
+ rb150_add_device_nand();
+
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds),
+ rb150_gpio_leds);
+ adm5120_add_device_switch(5, rb150_vlans);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_150, "miniROUTER", "Mikrotik RouterBOARD 150",
+ rb150_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c
new file mode 100644
index 0000000000..8456684951
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c
@@ -0,0 +1,70 @@
+/*
+ * Mikrotik RouterBOARD 153 support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+static struct resource rb153_cf_resources[] __initdata = {
+ {
+ .name = "cf_membase",
+ .start = ADM5120_EXTIO1_BASE,
+ .end = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
+ .flags = IORESOURCE_MEM
+ }, {
+ .name = "cf_irq",
+ .start = ADM5120_IRQ_GPIO4,
+ .end = ADM5120_IRQ_GPIO4,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct gpio_led rb153_gpio_leds[] __initdata = {
+ GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_speed", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact", NULL),
+};
+
+static u8 rb153_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init rb153_add_device_cf(void)
+{
+ /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
+ adm5120_gpio_csx1_enable();
+
+ /* enable the wait state pin GPIO[0] for external I/O control */
+ adm5120_gpio_ew_enable();
+
+ platform_device_register_simple("pata-rb153-cf", -1,
+ rb153_cf_resources, ARRAY_SIZE(rb153_cf_resources));
+}
+
+static void __init rb153_setup(void)
+{
+ rb1xx_generic_setup();
+ rb1xx_add_device_nand();
+ rb153_add_device_cf();
+
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds),
+ rb153_gpio_leds);
+ adm5120_add_device_switch(5, rb153_vlans);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_153, "150", "Mikrotik RouterBOARD 153",
+ rb153_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c
new file mode 100644
index 0000000000..9049421397
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c
@@ -0,0 +1,27 @@
+/*
+ * Mikrotik RouterBOARD 192 support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+static u8 rb192_vlans[6] __initdata = {
+ 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init rb192_setup(void)
+{
+ rb1xx_generic_setup();
+ rb1xx_add_device_nand();
+
+ adm5120_add_device_switch(6, rb192_vlans);
+}
+
+MIPS_MACHINE(MACH_ADM5120_RB_192, "192", "Mikrotik RouterBOARD 192",
+ rb192_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c
new file mode 100644
index 0000000000..8961115c7e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c
@@ -0,0 +1,149 @@
+/*
+ * Mikrotik RouterBOARD 1xx series support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * NAND initialization code was based on a driver for Linux 2.6.19+ which
+ * was derived from the driver for Linux 2.4.xx published by Mikrotik for
+ * their RouterBoard 1xx and 5xx series boards.
+ * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "rb-1xx.h"
+
+#define RB1XX_NAND_CHIP_DELAY 25
+
+#define RB1XX_KEYS_POLL_INTERVAL 20
+#define RB1XX_KEYS_DEBOUNCE_INTERVAL (3 * RB1XX_KEYS_POLL_INTERVAL)
+
+static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
+ PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
+ PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
+};
+
+static struct mtd_partition rb1xx_nor_parts[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition rb1xx_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ } , {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load. So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb1xx_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int rb1xx_nand_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512)
+ chip->ecc.layout = &rb1xx_nand_ecclayout;
+
+ return 0;
+}
+
+struct platform_nand_data rb1xx_nand_data __initdata = {
+ .chip = {
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts),
+ .partitions = rb1xx_nand_parts,
+ .chip_delay = RB1XX_NAND_CHIP_DELAY,
+ .chip_fixup = rb1xx_nand_fixup,
+ },
+};
+
+struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset_button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ADM5120_GPIO_PIN7,
+ }
+};
+
+static void __init rb1xx_mac_setup(void)
+{
+ if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
+ adm5120_setup_eth_macs(rb_hs.mac_base);
+ } else {
+ u8 mac[ETH_ALEN];
+
+ random_ether_addr(mac);
+ adm5120_setup_eth_macs(mac);
+ }
+}
+
+void __init rb1xx_add_device_flash(void)
+{
+ /* setup data for flash0 device */
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
+ adm5120_flash0_data.parts = rb1xx_nor_parts;
+ adm5120_flash0_data.window_size = 128*1024;
+
+ adm5120_add_device_flash(0);
+}
+
+void __init rb1xx_add_device_nand(void)
+{
+ /* enable NAND flash interface */
+ adm5120_nand_enable();
+
+ /* initialize NAND chip */
+ adm5120_nand_set_spn(1);
+ adm5120_nand_set_wpn(0);
+
+ adm5120_add_device_nand(&rb1xx_nand_data);
+}
+
+void __init rb1xx_generic_setup(void)
+{
+ if (adm5120_package_bga())
+ adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
+ rb1xx_pci_irqs);
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb1xx_gpio_buttons),
+ rb1xx_gpio_buttons);
+
+ rb1xx_add_device_flash();
+ rb1xx_mac_setup();
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h
new file mode 100644
index 0000000000..05e68bd0a8
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h
@@ -0,0 +1,33 @@
+/*
+ * Mikrotik RouterBOARD 1xx series support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_nand.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#include <prom/routerboot.h>
+
+extern struct platform_nand_data rb1xx_nand_data __initdata;
+extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata;
+
+extern void rb1xx_add_device_flash(void) __init;
+extern void rb1xx_add_device_nand(void) __init;
+extern void rb1xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile
new file mode 100644
index 0000000000..239d5a0880
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ADM5120_MACH_PMUGW) += pmugw.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c
new file mode 100644
index 0000000000..369892fd13
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c
@@ -0,0 +1,96 @@
+/*
+ * Motorola Powerline MU Gateway board
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#include <prom/admboot.h>
+
+#define PMUGW_CONFIG_OFFSET 0x10000
+#define PMUGW_CONFIG_SIZE 0x1000
+
+static struct mtd_partition pmugw_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "boardcfg",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static u8 pmugw_vlans[6] __initdata = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static __init void pmugw_setup_mac(void)
+{
+ u8 mac_base[6];
+ int err;
+
+ err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
+ PMUGW_CONFIG_SIZE, mac_base);
+
+ if ((err) || !is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+void __init pmugw_setup(void)
+{
+ /* setup flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN5, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
+ adm5120_flash0_data.parts = pmugw_partitions;
+
+ adm5120_add_device_uart(1); /* ttyAM0 */
+ adm5120_add_device_uart(0); /* ttyAM1 */
+
+ adm5120_add_device_flash(0);
+
+ pmugw_setup_mac();
+ adm5120_add_device_switch(5, pmugw_vlans);
+}
+
+MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway",
+ pmugw_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c
new file mode 100644
index 0000000000..a5c2c3653e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c
@@ -0,0 +1,71 @@
+/*
+ * OSBRiDGE 5GXi/5XLi board support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+static struct mtd_partition osbridge_5gxi_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "boardcfg",
+ .offset = 64*1024,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "5gxi:yellow:lan", NULL),
+};
+
+static struct adm5120_pci_irq osbridge_5gxi_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static u8 osbridge_5gxi_vlans[6] __initdata = {
+ 0x41, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static void __init osbridge_5gxi_setup(void)
+{
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions);
+ adm5120_flash0_data.parts = osbridge_5gxi_partitions;
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_add_device_flash(0);
+
+ adm5120_add_device_switch(1, osbridge_5gxi_vlans);
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(osbridge_5gxi_gpio_leds),
+ osbridge_5gxi_gpio_leds);
+ adm5120_pci_set_irq_map(ARRAY_SIZE(osbridge_5gxi_pci_irqs),
+ osbridge_5gxi_pci_irqs);
+}
+
+MIPS_MACHINE(MACH_ADM5120_5GXI, "5GXi", "OSBRiDGE 5GXi/5XLi board",
+ osbridge_5gxi_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile
new file mode 100644
index 0000000000..34946c5e58
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ADM5120_MACH_5GXI) += 5gxi.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile
new file mode 100644
index 0000000000..650be40779
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+lib-y += admboot.o
+lib-y += bootbase.o
+lib-y += cfe.o
+lib-y += generic.o
+lib-y += myloader.o
+lib-y += routerboot.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c
new file mode 100644
index 0000000000..b655390c16
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c
@@ -0,0 +1,55 @@
+/*
+ * ADMBoot specific prom routines
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <prom/admboot.h>
+#include "prom_read.h"
+
+#define ADMBOOT_MAGIC_MAC_BASE 0x636D676D /* 'mgmc' */
+#define ADMBOOT_MAGIC_MAC_BASE_BR6104XX 0x31305348 /* 'HS01' */
+
+int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac)
+{
+ u8 *cfg;
+ int i;
+
+ cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset);
+ for (i = 0; i < len; i += 4) {
+ u32 magic;
+
+ magic = prom_read_le32(cfg + i);
+ if (magic == ADMBOOT_MAGIC_MAC_BASE) {
+ int j;
+
+ for (j = 0; j < 6; j++)
+ mac[j] = cfg[i + 4 + j];
+
+ return 0;
+ }
+ if (magic == ADMBOOT_MAGIC_MAC_BASE_BR6104XX) {
+ int j;
+
+ for (j = 0; j < 6; j++)
+ mac[j] = cfg[i + 7 + j];
+
+ return 0;
+ }
+ }
+
+ return -ENXIO;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c
new file mode 100644
index 0000000000..063281e3f7
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c
@@ -0,0 +1,119 @@
+/*
+ * ZyXEL's Bootbase specific prom routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <prom/zynos.h>
+#include "prom_read.h"
+
+#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
+#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
+#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
+#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
+
+static int bootbase_found;
+static struct zynos_board_info *board_info;
+
+struct bootbase_info bootbase_info;
+
+static inline int bootbase_dbgarea_present(u8 *data)
+{
+ u32 t;
+
+ t = prom_read_be32(data+5);
+ if (t != ZYNOS_MAGIC_DBGAREA1)
+ return 0;
+
+ t = prom_read_be32(data+9);
+ if (t != ZYNOS_MAGIC_DBGAREA2)
+ return 0;
+
+ return 1;
+}
+
+static inline u32 bootbase_get_bootext_addr(void)
+{
+ return prom_read_be32(&board_info->bootext_addr);
+}
+
+static inline void bootbase_get_mac(u8 *mac)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ mac[i] = board_info->mac[i];
+}
+
+static inline u16 bootbase_get_vendor_id(void)
+{
+#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
+ unsigned char vendor[ZYNOS_NAME_LEN];
+ int i;
+
+ for (i = 0; i < ZYNOS_NAME_LEN; i++)
+ vendor[i] = board_info->vendor[i];
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
+ return ZYNOS_VENDOR_ID_ZYXEL;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
+ return ZYNOS_VENDOR_ID_DLINK;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
+ return ZYNOS_VENDOR_ID_LUCENT;
+
+ if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
+ return ZYNOS_VENDOR_ID_NETGEAR;
+
+ return ZYNOS_VENDOR_ID_OTHER;
+}
+
+static inline u16 bootbase_get_board_id(void)
+{
+ return prom_read_be16(&board_info->board_id);
+}
+
+int __init bootbase_present(void)
+{
+ u32 t;
+
+ if (bootbase_found)
+ goto out;
+
+ /* check presence of the dbgarea */
+ if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
+ goto out;
+
+ board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
+
+ /* check for a valid BootExt address */
+ t = bootbase_get_bootext_addr();
+ if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
+ goto out;
+
+ bootbase_info.vendor_id = bootbase_get_vendor_id();
+ bootbase_info.board_id = bootbase_get_board_id();
+ bootbase_get_mac(bootbase_info.mac);
+
+ bootbase_found = 1;
+
+out:
+ return bootbase_found;
+}
+
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c
new file mode 100644
index 0000000000..5a343cd7e4
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c
@@ -0,0 +1,69 @@
+/*
+ * Broadcom's CFE specific prom routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <prom/cfe.h>
+#include "prom_read.h"
+
+/*
+ * CFE based boards
+ */
+#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE
+from other bootloaders */
+
+static int cfe_found;
+
+static u32 cfe_handle;
+static u32 cfe_entry;
+static u32 cfe_seal;
+
+int __init cfe_present(void)
+{
+ /*
+ * This method only works, when we are booted directly from the CFE.
+ */
+ u32 a1 = (u32) fw_arg1;
+
+ if (cfe_found)
+ return 1;
+
+ cfe_handle = (u32) fw_arg0;
+ cfe_entry = (u32) fw_arg2;
+ cfe_seal = (u32) fw_arg3;
+
+ /* Check for CFE by finding the CFE magic number */
+ if (cfe_seal != CFE_EPTSEAL)
+ return 0;
+
+ /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
+ if (a1 != 0)
+ return 0;
+
+ /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+ if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
+ return 0;
+
+ cfe_found = 1;
+ return 1;
+}
+
+char *cfe_getenv(char *envname)
+{
+ if (cfe_found == 0)
+ return NULL;
+
+ return NULL;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c
new file mode 100644
index 0000000000..4d4caa8476
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c
@@ -0,0 +1,47 @@
+/*
+ * Generic PROM routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include <prom/generic.h>
+
+static int *_prom_argc;
+static char **_prom_argv;
+static char **_prom_envp;
+
+char *generic_prom_getenv(char *envname)
+{
+ char **env;
+ char *ret;
+
+ ret = NULL;
+ for (env = _prom_envp; *env != NULL; env++) {
+ if (strcmp(envname, *env++) == 0) {
+ ret = *env;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int generic_prom_present(void)
+{
+ _prom_argc = (int *)fw_arg0;
+ _prom_argv = (char **)fw_arg1;
+ _prom_envp = (char **)fw_arg2;
+
+ return 1;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c
new file mode 100644
index 0000000000..5357db511b
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c
@@ -0,0 +1,68 @@
+/*
+ * Compex's MyLoader specific prom routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <prom/myloader.h>
+#include "prom_read.h"
+
+#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
+#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
+#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
+
+static int myloader_found;
+
+struct myloader_info myloader_info;
+
+int __init myloader_present(void)
+{
+ struct mylo_system_params *sysp;
+ struct mylo_board_params *boardp;
+ struct mylo_partition_table *parts;
+ int i;
+
+ if (myloader_found)
+ goto out;
+
+ sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
+ boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
+ parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
+
+ /* Check for some magic numbers */
+ if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
+ (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
+ (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
+ goto out;
+
+ myloader_info.vid = le32_to_cpu(sysp->vid);
+ myloader_info.did = le32_to_cpu(sysp->did);
+ myloader_info.svid = le32_to_cpu(sysp->svid);
+ myloader_info.sdid = le32_to_cpu(sysp->sdid);
+
+ for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
+ int j;
+ for (j = 0; j < 6; j++)
+ myloader_info.macs[i][j] = boardp->addr[i].mac[j];
+ }
+
+ myloader_found = 1;
+
+out:
+ return myloader_found;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h
new file mode 100644
index 0000000000..1a6ea110ce
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h
@@ -0,0 +1,50 @@
+/*
+ * Generic prom definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ADM5120_PROM_H_
+#define _ADM5120_PROM_H_
+
+/*
+ * Helper routines
+ */
+static inline u16 prom_read_le16(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u16)p[0] + ((u16)p[1] << 8));
+}
+
+static inline u32 prom_read_le32(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
+ ((u32)p[3] << 24));
+}
+
+static inline u16 prom_read_be16(void *buf)
+{
+ u8 *p = buf;
+
+ return (((u16)p[0] << 8) + (u16)p[1]);
+}
+
+static inline u32 prom_read_be32(void *buf)
+{
+ u8 *p = buf;
+
+ return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
+ ((u32)p[3]));
+}
+
+#endif /* _ADM5120_PROM_H_ */
+
+
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c
new file mode 100644
index 0000000000..d9a06d968e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c
@@ -0,0 +1,121 @@
+/*
+ * Mikrotik's RouterBOOT specific prom routines
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/routerboot.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <prom/routerboot.h>
+#include "prom_read.h"
+
+struct rb_hard_settings rb_hs;
+static int rb_found;
+
+static int __init routerboot_load_hs(u8 *buf, u16 buflen)
+{
+ u16 id, len;
+
+ memset(&rb_hs, 0, sizeof(rb_hs));
+
+ if (buflen < 4)
+ return -1;
+
+ if (prom_read_le32(buf) != RB_MAGIC_HARD)
+ return -1;
+
+ /* skip magic value */
+ buf += 4;
+ buflen -= 4;
+
+ while (buflen > 2) {
+ id = prom_read_le16(buf);
+ buf += 2;
+ buflen -= 2;
+ if (id == RB_ID_TERMINATOR || buflen < 2)
+ break;
+
+ len = prom_read_le16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (buflen < len)
+ break;
+
+ switch (id) {
+ case RB_ID_BIOS_VERSION:
+ rb_hs.bios_ver = (char *)buf;
+ break;
+ case RB_ID_BOARD_NAME:
+ rb_hs.name = (char *)buf;
+ break;
+ case RB_ID_MEMORY_SIZE:
+ rb_hs.mem_size = prom_read_le32(buf);
+ break;
+ case RB_ID_MAC_ADDRESS_COUNT:
+ rb_hs.mac_count = prom_read_le32(buf);
+ break;
+ case RB_ID_MAC_ADDRESS_PACK:
+ if ((len / RB_MAC_SIZE) > 0)
+ rb_hs.mac_base = buf;
+ break;
+ }
+
+ buf += len;
+ buflen -= len;
+
+ }
+
+ return 0;
+}
+
+#define RB_BS_OFFS 0x14
+#define RB_OFFS_MAX (128*1024)
+
+int __init routerboot_present(void)
+{
+ struct rb_bios_settings *bs;
+ u8 *base;
+ u32 off, len;
+
+ if (rb_found)
+ goto out;
+
+ base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
+ bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
+
+ off = prom_read_le32(&bs->hs_offs);
+ len = prom_read_le32(&bs->hs_size);
+ if (off > RB_OFFS_MAX)
+ goto out;
+
+ if (routerboot_load_hs(base+off, len) != 0)
+ goto out;
+
+ rb_found = 1;
+
+out:
+ return rb_found;
+}
+
+char *routerboot_get_boardname(void)
+{
+ if (rb_found == 0)
+ return NULL;
+
+ return rb_hs.name;
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile
new file mode 100644
index 0000000000..e8325a1b1f
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile
@@ -0,0 +1,4 @@
+obj-y += p-33x.o
+
+obj-${CONFIG_ADM5120_MACH_P_334WT} += p-334wt.o
+obj-${CONFIG_ADM5120_MACH_P_335} += p-335.o \ No newline at end of file
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c
new file mode 100644
index 0000000000..6cc9aee857
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c
@@ -0,0 +1,34 @@
+/*
+ * ZyXEL Prestige P-334WT support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "p-33x.h"
+
+static struct gpio_led p334wt_gpio_leds[] __initdata = {
+ GPIO_LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P2L2, "otist", NULL),
+ GPIO_LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL),
+};
+
+static void __init p334wt_setup(void)
+{
+ p33x_generic_setup();
+ adm5120_add_device_gpio_leds(ARRAY_SIZE(p334wt_gpio_leds),
+ p334wt_gpio_leds);
+}
+
+MIPS_MACHINE(MACH_ADM5120_P334WT, "P-334WT", "ZyXEL Prestige 334WT",
+ p334wt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c
new file mode 100644
index 0000000000..6ac2b09158
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c
@@ -0,0 +1,21 @@
+/*
+ * ZyXEL Prestige P-335/335WT support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "p-33x.h"
+
+static void __init p335_setup(void)
+{
+ p33x_generic_setup();
+ adm5120_add_device_usb();
+}
+
+MIPS_MACHINE(MACH_ADM5120_P335, "P-335", "ZyXEL Prestige 335/335WT",
+ p335_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c
new file mode 100644
index 0000000000..2626cf9eec
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c
@@ -0,0 +1,85 @@
+/*
+ * ZyXEL Prestige P-33x boards support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "p-33x.h"
+
+#include <prom/zynos.h>
+
+#define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
+static struct mtd_partition p33x_partitions[] = {
+ {
+ .name = "bootbase",
+ .offset = 0,
+ .size = 16*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "rom",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "bootext1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 32*1024,
+ } , {
+ .name = "bootext2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "trx",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ } , {
+ .name = "firmware",
+ .offset = 32*1024,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
+ PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static u8 p33x_vlans[6] __initdata = {
+ /* FIXME: untested */
+ 0x50, 0x48, 0x44, 0x42, 0x41, 0x00
+};
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(P33X_GPIO_FLASH_A20, 0);
+ break;
+ case 1:
+ gpio_set_value(P33X_GPIO_FLASH_A20, 1);
+ break;
+ }
+}
+
+void __init p33x_generic_setup(void)
+{
+ /* setup data for flash0 device */
+ gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
+ gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
+ adm5120_flash0_data.parts = p33x_partitions;
+ adm5120_add_device_flash(0);
+
+ adm5120_add_device_uart(0);
+ adm5120_add_device_uart(1);
+
+ adm5120_setup_eth_macs(bootbase_info.mac);
+ adm5120_add_device_switch(6, p33x_vlans);
+
+ adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);
+}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h
new file mode 100644
index 0000000000..8a7340cb5e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h
@@ -0,0 +1,22 @@
+/*
+ * ZyXEL Prestige P-33x boards support
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+extern void p33x_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
new file mode 100644
index 0000000000..bf220ff4d6
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
@@ -0,0 +1,53 @@
+/*
+ * ADM5120 SoC definitions
+ *
+ * This file defines some constants specific to the ADM5120 SoC
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H
+#define _ASM_MIPS_MACH_ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE 0x00000000
+#define ADM5120_SDRAM1_BASE 0x01000000
+#define ADM5120_SRAM1_BASE 0x10000000
+#define ADM5120_EXTIO0_BASE 0x10C00000
+#define ADM5120_EXTIO0_SIZE 0x00200000
+#define ADM5120_EXTIO1_BASE 0x10E00000
+#define ADM5120_EXTIO1_SIZE 0x00200000
+#define ADM5120_MPMC_BASE 0x11000000
+#define ADM5120_MPMC_SIZE 0x00200000
+#define ADM5120_USBC_BASE 0x11200000
+#define ADM5120_USBC_SIZE 0x00200000
+#define ADM5120_PCIMEM_BASE 0x11400000
+#define ADM5120_PCIMEM_SIZE 0x00100000
+#define ADM5120_PCIIO_BASE 0x11500000
+#define ADM5120_PCIIO_SIZE 0x000FFFF0
+#define ADM5120_PCICFG_ADDR 0x115FFFF0
+#define ADM5120_PCICFG_DATA 0x115FFFF8
+#define ADM5120_PCICFG_SIZE 0x00000010
+#define ADM5120_SWITCH_BASE 0x12000000
+#define ADM5120_SWITCH_SIZE 0x00200000
+#define ADM5120_INTC_BASE 0x12200000
+#define ADM5120_INTC_SIZE 0x00200000
+#define ADM5120_UART0_BASE 0x12600000
+#define ADM5120_UART1_BASE 0x12800000
+#define ADM5120_UART_SIZE 0x00200000
+#define ADM5120_SRAM0_BASE 0x1FC00000
+
+#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE
+#define ADM5120_NAND_SIZE 0xB
+
+#define ADM5120_CLK_175 175000000
+#define ADM5120_CLK_200 200000000
+#define ADM5120_CLK_225 225000000
+#define ADM5120_CLK_250 250000000
+
+#define ADM5120_UART_CLOCK 62500000
+
+#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h
new file mode 100644
index 0000000000..1d34d80ee6
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_INFO_H
+#define _MACH_ADM5120_INFO_H
+
+#include <linux/types.h>
+
+extern unsigned int adm5120_prom_type;
+#define ADM5120_PROM_GENERIC 0
+#define ADM5120_PROM_CFE 1
+#define ADM5120_PROM_MYLOADER 2
+#define ADM5120_PROM_ROUTERBOOT 3
+#define ADM5120_PROM_BOOTBASE 4
+#define ADM5120_PROM_UBOOT 5
+#define ADM5120_PROM_LAST 5
+
+extern unsigned int adm5120_product_code;
+extern unsigned int adm5120_revision;
+extern unsigned int adm5120_nand_boot;
+
+extern unsigned long adm5120_speed;
+#define ADM5120_SPEED_175 175000000
+#define ADM5120_SPEED_200 200000000
+#define ADM5120_SPEED_225 225000000
+#define ADM5120_SPEED_250 250000000
+
+extern unsigned int adm5120_package;
+#define ADM5120_PACKAGE_PQFP 0
+#define ADM5120_PACKAGE_BGA 1
+
+extern unsigned long adm5120_memsize;
+
+enum {
+ MACH_ADM5120_GENERIC = 0, /* Generic board */
+ MACH_ADM5120_5GXI, /* OSBRiDGE 5GXi/5XLi */
+ MACH_ADM5120_BR6104K, /* Edimax BR-6104K */
+ MACH_ADM5120_BR6104KP, /* Edimax BR-6104KP */
+ MACH_ADM5120_BR61X4WG, /* Edimax BR-6104Wg/BR-6114WG */
+ MACH_ADM5120_CAS630, /* Cellvision CAS-630/630W */
+ MACH_ADM5120_CAS670, /* Cellvision CAS-670/670W */
+ MACH_ADM5120_CAS700, /* Cellvision CAS-700/700W */
+ MACH_ADM5120_CAS771, /* Cellvision CAS-771/771W */
+ MACH_ADM5120_CAS790, /* Cellvision CAS-790 */
+ MACH_ADM5120_CAS861, /* Cellvision CAS-861/861W */
+ MACH_ADM5120_EASY5120PATA, /* Infineon EASY 5120P-ATA */
+ MACH_ADM5120_EASY5120RT, /* Infineon EASY 5120-RT */
+ MACH_ADM5120_EASY5120WVOIP, /* Infineon EASY 5120-WVoIP */
+ MACH_ADM5120_EASY83000, /* Infineon EASY-83000 */
+ MACH_ADM5120_ES2108, /* ZyXEL Ethernet Switch 2108 */
+ MACH_ADM5120_ES2108F, /* ZyXEL Ethernet Switch 2108-F */
+ MACH_ADM5120_ES2108G, /* ZyXEL Ethernet Switch 2108-G */
+ MACH_ADM5120_ES2108LC, /* ZyXEL Ethernet Switch 2108-LC */
+ MACH_ADM5120_ES2108PWR, /* ZyXEL Ethernet Switch 2108-PWR */
+ MACH_ADM5120_ES2024A, /* ZyXEL Ethernet Switch 2024A */
+ MACH_ADM5120_ES2024PWR, /* ZyXEL Ethernet Switch 2024PWR */
+ MACH_ADM5120_HS100, /* ZyXEL HomeSafe 100/100W */
+ MACH_ADM5120_NFS101U, /* Cellvision NFS-101U/101WU */
+ MACH_ADM5120_NFS202U, /* Cellvision NFS-202U/202WU */
+ MACH_ADM5120_NP28G, /* Compex NP28G */
+ MACH_ADM5120_NP28GHS, /* Compex NP28G HotSpot */
+ MACH_ADM5120_NP27G, /* Compex NP27G */
+ MACH_ADM5120_RB_11X, /* Mikrotik RouterBOARD 111/112 */
+ MACH_ADM5120_RB_133, /* Mikrotik RouterBOARD 133 */
+ MACH_ADM5120_RB_133C, /* Mikrotik RouterBOARD 133c */
+ MACH_ADM5120_RB_150, /* Mikrotik RouterBOARD 150 */
+ MACH_ADM5120_RB_153, /* Mikrotik RouterBOARD 153 */
+ MACH_ADM5120_RB_192, /* Mikrotik RouterBOARD 192 */
+ MACH_ADM5120_P334U, /* ZyXEL Prestige 334U */
+ MACH_ADM5120_P334W, /* ZyXEL Prestige 334W */
+ MACH_ADM5120_P334WH, /* ZyXEL Prestige 334WH */
+ MACH_ADM5120_P334WHD, /* ZyXEL Prestige 334WHD */
+ MACH_ADM5120_P334WT, /* ZyXEL Prestige 334WT */
+ MACH_ADM5120_P335, /* ZyXEL Prestige 335/335WT */
+ MACH_ADM5120_P335PLUS, /* ZyXEL Prestige 335Plus */
+ MACH_ADM5120_P335U, /* ZyXEL Prestige 335U */
+ MACH_ADM5120_PMUGW, /* Motorola Powerline MU Gateway */
+ MACH_ADM5120_WP54, /* Compex WP54G/WP54AG/WPP54G/WPP54AG */
+ MACH_ADM5120_WP54G_WRT, /* Compex WP54G-WRT */
+ MACH_ADM5120_WP54Gv1C, /* Compex WP54G version 1C */
+ MACH_ADM5120_EB_214A, /* Generic EB-214A */
+};
+
+/*
+ * TODO:remove adm5120_eth* variables when the switch driver will be
+ * converted into a real platform driver
+ */
+extern unsigned int adm5120_eth_num_ports;
+extern unsigned char adm5120_eth_macs[6][6];
+extern unsigned char adm5120_eth_vlans[6];
+
+extern void adm5120_soc_init(void) __init;
+extern void adm5120_mem_init(void) __init;
+extern void adm5120_ndelay(u32 ns);
+
+extern void (*adm5120_board_reset)(void);
+
+extern void adm5120_gpio_init(void) __init;
+extern void adm5120_gpio_csx0_enable(void) __init;
+extern void adm5120_gpio_csx1_enable(void) __init;
+extern void adm5120_gpio_ew_enable(void) __init;
+
+static inline int adm5120_package_pqfp(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_PQFP);
+}
+
+static inline int adm5120_package_bga(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_pci(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_gmii(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+#endif /* _MACH_ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
new file mode 100644
index 0000000000..70dd6bbe85
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
@@ -0,0 +1,63 @@
+/*
+ * ADM5120 interrupt controller definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in interrupt controller.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_INTC_H
+#define _MACH_ADM5120_INTC_H
+
+/*
+ * INTC register offsets
+ */
+#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */
+#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */
+#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */
+#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */
+#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR
+#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */
+#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */
+#define INTC_REG_IRQ_TEST_SOURCE 0x1C
+#define INTC_REG_IRQ_SOURCE_SELECT 0x20
+#define INTC_REG_INT_LEVEL 0x24
+
+/*
+ * INTC IRQ numbers
+ */
+#define INTC_IRQ_TIMER 0 /* built in timer */
+#define INTC_IRQ_UART0 1 /* built-in UART0 */
+#define INTC_IRQ_UART1 2 /* built-in UART1 */
+#define INTC_IRQ_USBC 3 /* USB Host Controller */
+#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */
+#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */
+#define INTC_IRQ_PCI0 6 /* PCI slot 2 */
+#define INTC_IRQ_PCI1 7 /* PCI slot 3 */
+#define INTC_IRQ_PCI2 8 /* PCI slot 4 */
+#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */
+#define INTC_IRQ_LAST INTC_IRQ_SWITCH
+#define INTC_IRQ_COUNT 10
+
+/*
+ * INTC register bits
+ */
+#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER)
+#define INTC_INT_UART0 (1 << INTC_IRQ_UART0)
+#define INTC_INT_UART1 (1 << INTC_IRQ_UART1)
+#define INTC_INT_USBC (1 << INTC_IRQ_USBC)
+#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0)
+#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1)
+#define INTC_INT_PCI0 (1 << INTC_IRQ_PCI0)
+#define INTC_INT_PCI1 (1 << INTC_IRQ_PCI1)
+#define INTC_INT_PCI2 (1 << INTC_IRQ_PCI2)
+#define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH)
+#define INTC_INT_ALL ((1 << INTC_IRQ_COUNT) - 1)
+
+#endif /* _MACH_ADM5120_INTC_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
new file mode 100644
index 0000000000..c4e9591fb8
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
@@ -0,0 +1,92 @@
+/*
+ * ADM5120 MPMC (Multiport Memory Controller) register definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_MPMC_H
+#define _MACH_ADM5120_MPMC_H
+
+#define MPMC_READ_REG(r) __raw_readl( \
+ (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
+#define MPMC_WRITE_REG(r, v) __raw_writel((v), \
+ (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
+
+#define MPMC_REG_CTRL 0x0000
+#define MPMC_REG_STATUS 0x0004
+#define MPMC_REG_CONF 0x0008
+#define MPMC_REG_DC 0x0020
+#define MPMC_REG_DR 0x0024
+#define MPMC_REG_DRP 0x0030
+
+#define MPMC_REG_DC0 0x0100
+#define MPMC_REG_DRC0 0x0104
+#define MPMC_REG_DC1 0x0120
+#define MPMC_REG_DRC1 0x0124
+#define MPMC_REG_DC2 0x0140
+#define MPMC_REG_DRC2 0x0144
+#define MPMC_REG_DC3 0x0160
+#define MPMC_REG_DRC3 0x0164
+#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */
+#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */
+#define MPMC_REG_SC2 0x0240
+#define MPMC_REG_WEN2 0x0244
+#define MPMC_REG_OEN2 0x0248
+#define MPMC_REG_RD2 0x024C
+#define MPMC_REG_PG2 0x0250
+#define MPMC_REG_WR2 0x0254
+#define MPMC_REG_TN2 0x0258
+#define MPMC_REG_SC3 0x0260
+
+/* Control register bits */
+#define MPMC_CTRL_AM (1 << 1) /* Address Mirror */
+#define MPMC_CTRL_LPM (1 << 2) /* Low Power Mode */
+#define MPMC_CTRL_DWB (1 << 3) /* Drain Write Buffers */
+
+/* Status register bits */
+#define MPMC_STATUS_BUSY (1 << 0) /* Busy */
+#define MPMC_STATUS_WBS (1 << 1) /* Write Buffer Status */
+#define MPMC_STATUS_SRA (1 << 2) /* Self-Refresh Acknowledge*/
+
+/* Dynamic Control register bits */
+#define MPMC_DC_CE (1 << 0)
+#define MPMC_DC_DMC (1 << 1)
+#define MPMC_DC_SRR (1 << 2)
+#define MPMC_DC_SI_SHIFT 7
+#define MPMC_DC_SI_MASK (3 << 7)
+#define MPMC_DC_SI_NORMAL (0 << 7)
+#define MPMC_DC_SI_MODE (1 << 7)
+#define MPMC_DC_SI_PALL (2 << 7)
+#define MPMC_DC_SI_NOP (3 << 7)
+
+#define SRAM_REG_CONF 0x00
+#define SRAM_REG_WWE 0x04
+#define SRAM_REG_WOE 0x08
+#define SRAM_REG_WRD 0x0C
+#define SRAM_REG_WPG 0x10
+#define SRAM_REG_WWR 0x14
+#define SRAM_REG_WTR 0x18
+
+/* Dynamic Configuration register bits */
+#define DC_BE (1 << 19) /* buffer enable */
+#define DC_RW_SHIFT 28 /* shift for number of rows */
+#define DC_RW_MASK 0x03
+#define DC_NB_SHIFT 26 /* shift for number of banks */
+#define DC_NB_MASK 0x01
+#define DC_CW_SHIFT 22 /* shift for number of columns */
+#define DC_CW_MASK 0x07
+#define DC_DW_SHIFT 7 /* shift for device width */
+#define DC_DW_MASK 0x03
+
+/* Static Configuration register bits */
+#define SC_MW_MASK 0x03 /* memory width mask */
+#define SC_MW_8 0x00 /* 8 bit memory width */
+#define SC_MW_16 0x01 /* 16 bit memory width */
+#define SC_MW_32 0x02 /* 32 bit memory width */
+
+#endif /* _MACH_ADM5120_MPMC_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
new file mode 100644
index 0000000000..1e2f3bd15d
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
@@ -0,0 +1,89 @@
+/*
+ * ADM5120 NAND interface definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in NAND interface.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * NAND interface routines was based on a driver for Linux 2.6.19+ which
+ * was derived from the driver for Linux 2.4.xx published by Mikrotik for
+ * their RouterBoard 1xx and 5xx series boards.
+ * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_NAND_H
+#define _MACH_ADM5120_NAND_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+/* NAND control registers */
+#define NAND_REG_DATA 0x0 /* data register */
+#define NAND_REG_SET_CEn 0x1 /* CE# low */
+#define NAND_REG_CLR_CEn 0x2 /* CE# high */
+#define NAND_REG_CLR_CLE 0x3 /* CLE low */
+#define NAND_REG_SET_CLE 0x4 /* CLE high */
+#define NAND_REG_CLR_ALE 0x5 /* ALE low */
+#define NAND_REG_SET_ALE 0x6 /* ALE high */
+#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */
+#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */
+#define NAND_REG_SET_WPn 0x9 /* WP# low */
+#define NAND_REG_CLR_WPn 0xA /* WP# high */
+#define NAND_REG_STATUS 0xB /* Status register */
+
+#define ADM5120_NAND_STATUS_READY 0x80
+
+#define NAND_READ_REG(r) \
+ readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+#define NAND_WRITE_REG(r, v) \
+ writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+
+/*-------------------------------------------------------------------------*/
+
+static inline void adm5120_nand_enable(void)
+{
+ SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
+ SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
+}
+
+static inline void adm5120_nand_set_wpn(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
+}
+
+static inline void adm5120_nand_set_spn(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
+}
+
+static inline void adm5120_nand_set_cle(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
+}
+
+static inline void adm5120_nand_set_ale(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
+}
+
+static inline void adm5120_nand_set_cen(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
+}
+
+static inline u8 adm5120_nand_get_status(void)
+{
+ return NAND_READ_REG(NAND_REG_STATUS);
+}
+
+#endif /* _MACH_ADM5120_NAND_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
new file mode 100644
index 0000000000..ed73b53297
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
@@ -0,0 +1,87 @@
+/*
+ * ADM5120 specific platform definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H
+#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+
+struct adm5120_flash_platform_data {
+ void (*set_vpp)(struct map_info *, int);
+ void (*switch_bank)(unsigned);
+ u32 window_size;
+ unsigned int nr_parts;
+ struct mtd_partition *parts;
+};
+
+struct adm5120_switch_platform_data {
+ /* TODO: not yet implemented */
+};
+
+struct adm5120_pci_irq {
+ u8 slot;
+ u8 func;
+ u8 pin;
+ unsigned irq;
+};
+
+#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)}
+
+#ifdef CONFIG_PCI
+extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
+ struct adm5120_pci_irq *map) __init;
+#else
+static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
+ struct adm5120_pci_irq *map)
+{
+}
+#endif
+
+extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
+
+extern struct adm5120_flash_platform_data adm5120_flash0_data;
+extern struct adm5120_flash_platform_data adm5120_flash1_data;
+
+extern void adm5120_add_device_flash(unsigned id) __init;
+extern void adm5120_add_device_usb(void) __init;
+extern void adm5120_add_device_uart(unsigned id) __init;
+extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init;
+extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init;
+extern void adm5120_register_gpio_buttons(int id,
+ unsigned poll_interval,
+ unsigned nbuttons,
+ struct gpio_keys_button *buttons);
+
+#define GPIO_LED_DEF(g, n, t, a) { \
+ .name = (n), \
+ .default_trigger = (t), \
+ .gpio = (g), \
+ .active_low = (a) \
+}
+
+#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0)
+#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1)
+
+extern void adm5120_add_device_gpio_leds(unsigned num_leds,
+ struct gpio_led *leds) __init;
+
+#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
new file mode 100644
index 0000000000..91adc5bae9
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
@@ -0,0 +1,300 @@
+/*
+ * ADM5120 ethernet switch definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in Ethernet switch.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_SWITCH_H
+#define _MACH_ADM5120_SWITCH_H
+
+#ifndef BIT
+# define BIT(at) (1 << (at))
+#endif
+#define BITMASK(len) (BIT(len)-1)
+
+#define SW_READ_REG(r) __raw_readl( \
+ (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
+#define SW_WRITE_REG(r, v) __raw_writel((v), \
+ (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE 0x0000
+#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */
+#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */
+#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */
+#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */
+#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */
+#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */
+#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */
+#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */
+#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */
+#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */
+#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */
+#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */
+#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */
+#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */
+#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */
+#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */
+#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */
+#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */
+#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */
+#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */
+#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */
+#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */
+#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */
+#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */
+#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */
+#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */
+#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */
+#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */
+#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */
+#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */
+#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */
+#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */
+
+#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */
+#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */
+#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */
+#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */
+#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */
+#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */
+#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */
+#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */
+
+#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */
+#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */
+
+#define SWITCH_REG_PORT0_LED 0x0100
+#define SWITCH_REG_PORT1_LED 0x0104
+#define SWITCH_REG_PORT2_LED 0x0108
+#define SWITCH_REG_PORT3_LED 0x010C
+#define SWITCH_REG_PORT4_LED 0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK BITMASK(16) /* Product Code */
+#define CODE_REV_SHIFT 16
+#define CODE_REV_MASK BITMASK(4) /* Product Revision */
+#define CODE_CLKS_SHIFT 20
+#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
+#define CODE_CLKS_175 0 /* 175 MHz */
+#define CODE_CLKS_200 1 /* 200 MHz */
+#define CODE_CLKS_225 2 /* 225 MHz */
+#define CODE_CLKS_250 3 /* 250 MHz */
+#define CODE_NAB BIT(24) /* NAND boot */
+#define CODE_PK_MASK BITMASK(1) /* Package type */
+#define CODE_PK_SHIFT 29
+#define CODE_PK_BGA 0 /* BGA package */
+#define CODE_PK_PQFP 1 /* PQFP package */
+
+/* MEMCTRL register bits */
+#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */
+#define MEMCTRL_SDRS_4M 0x01
+#define MEMCTRL_SDRS_8M 0x02
+#define MEMCTRL_SDRS_16M 0x03
+#define MEMCTRL_SDRS_64M 0x04
+#define MEMCTRL_SDRS_128M 0x05
+#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */
+
+#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */
+#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */
+#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */
+#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */
+#define MEMCTRL_SRS_512K 0x01 /* 512KB*/
+#define MEMCTRL_SRS_1M 0x02 /* 1MB */
+#define MEMCTRL_SRS_2M 0x03 /* 2MB */
+#define MEMCTRL_SRS_4M 0x04 /* 4MB */
+
+/* Port bits used in various registers */
+#define SWITCH_PORT_PHY0 BIT(0)
+#define SWITCH_PORT_PHY1 BIT(1)
+#define SWITCH_PORT_PHY2 BIT(2)
+#define SWITCH_PORT_PHY3 BIT(3)
+#define SWITCH_PORT_PHY4 BIT(4)
+#define SWITCH_PORT_MII BIT(5)
+#define SWITCH_PORT_CPU BIT(6)
+
+/* Port bit shorthands */
+#define SWITCH_PORTS_PHY 0x1F /* phy ports */
+#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */
+#define SWITCH_PORTS_ALL 0x7F /* all ports */
+
+/* CPUP_CONF register bits */
+#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */
+#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */
+#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */
+#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */
+#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */
+#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */
+
+/* PORT_CONF0 register bits */
+#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */
+#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */
+#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */
+
+/* PORT_CONF1 register bits */
+#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */
+#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */
+#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */
+
+/* SEND_TRIG register bits */
+#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */
+#define SEND_TRIG_STH BIT(1) /* Send Trigger High */
+
+/* MAC_WT0 register bits */
+#define MAC_WT0_MAWC BIT(0) /* MAC address write command */
+#define MAC_WT0_MWD_SHIFT 1
+#define MAC_WT0_MWD BIT(1) /* MAC write done */
+#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */
+#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */
+#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */
+#define MAC_WT0_WPMN_SHIFT 7
+#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */
+#define MAC_WT0_WAF_EMPTY 0
+#define MAC_WT0_WAF_STATIC 7 /* age: static */
+#define MAC_WT0_MAC0_SHIFT 16
+#define MAC_WT0_MAC1_SHIFT 24
+
+/* MAC_WT1 register bits */
+#define MAC_WT1_MAC2_SHIFT 0
+#define MAC_WT1_MAC3_SHIFT 8
+#define MAC_WT1_MAC4_SHIFT 16
+#define MAC_WT1_MAC5_SHIFT 24
+
+/* BW_CNTL0/BW_CNTL1 register bits */
+#define BW_CNTL_DISABLE 0x00
+#define BW_CNTL_64K 0x01
+#define BW_CNTL_128K 0x02
+#define BW_CNTL_256K 0x03
+#define BW_CNTL_512K 0x04
+#define BW_CNTL_1M 0x05
+#define BW_CNTL_4M 0x06
+#define BW_CNTL_10M 0x07
+
+#define P4TBC_SHIFT 0
+#define P4RBC_SHIFT 4
+#define P5TBC_SHIFT 8
+#define P5RBC_SHIFT 12
+
+#define BW_CNTL1_NAND_ENABLE 0x100
+
+/* PHY_CNTL0 register bits */
+#define PHY_CNTL0_PHYA_MASK BITMASK(5)
+#define PHY_CNTL0_PHYR_MASK BITMASK(5)
+#define PHY_CNTL0_PHYR_SHIFT 8
+#define PHY_CNTL0_WC BIT(13) /* Write Command */
+#define PHY_CNTL0_RC BIT(14) /* Read Command */
+#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */
+#define PHY_CNTL0_WTD_SHIFT 16
+
+/* PHY_CNTL1 register bits */
+#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */
+#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */
+#define PHY_CNTL1_RD_MASK BITMASK(16)
+#define PHY_CNTL1_RD_SHIFT 16
+
+/* PHY_CNTL2 register bits */
+#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */
+#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */
+#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */
+#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */
+#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */
+#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */
+/* PHY_CNTL2_RMAE is bad in datasheet */
+#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */
+
+/* PHY_CNTL3 register bits */
+#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */
+
+/* PORT_TH register bits */
+#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */
+#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */
+#define PORT_TH_CPUT_MASK BITMASK(8)
+#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */
+#define PORT_TH_CPUHT_MASK BITMASK(8)
+#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */
+#define PORT_TH_CPURT_MASK BITMASK(8)
+
+/* EMPTY_CNT register bits */
+#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */
+
+/* GPIO_CONF0 register bits */
+#define GPIO_CONF0_MASK BITMASK(8)
+#define GPIO_CONF0_IM_SHIFT 0
+#define GPIO_CONF0_IV_SHIFT 8
+#define GPIO_CONF0_OE_SHIFT 16
+#define GPIO_CONF0_OV_SHIFT 24
+#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT)
+#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT)
+#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT)
+#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT)
+
+/* GPIO_CONF2 register bits */
+#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */
+#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */
+#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */
+
+/* INT_STATUS/INT_MASK register bits */
+#define SWITCH_INT_SHD BIT(0) /* Send High Done */
+#define SWITCH_INT_SLD BIT(1) /* Send Low Done */
+#define SWITCH_INT_RHD BIT(2) /* Receive High Done */
+#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */
+#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */
+#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */
+#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */
+#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */
+#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */
+#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */
+#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */
+#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */
+#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */
+#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */
+#define SWITCH_INT_MD BIT(15) /* Must Drop */
+#define SWITCH_INT_BCS BIT(16) /* BC Storm */
+#define SWITCH_INT_PSC BIT(18) /* Port Status Change */
+#define SWITCH_INT_ID BIT(19) /* Intruder Detected */
+#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */
+#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */
+#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */
+#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */
+#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */
+
+/* TIMER_INT register bits */
+#define TIMER_INT_TOS BIT(0) /* time-out status */
+#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */
+
+/* TIMER register bits */
+#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */
+#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */
+#define TIMER_TE BIT(16) /* timer enable bit */
+
+/* PORTx_LED register bits */
+#define LED_MODE_MASK BITMASK(4)
+#define LED_MODE_INPUT 0
+#define LED_MODE_FLASH 1
+#define LED_MODE_OUT_HIGH 2
+#define LED_MODE_OUT_LOW 3
+#define LED_MODE_LINK 4
+#define LED_MODE_SPEED 5
+#define LED_MODE_DUPLEX 6
+#define LED_MODE_ACT 7
+#define LED_MODE_COLL 8
+#define LED_MODE_LINK_ACT 9
+#define LED_MODE_DUPLEX_COLL 10
+#define LED_MODE_10M_ACT 11
+#define LED_MODE_100M_ACT 12
+#define LED0_MODE_SHIFT 0 /* LED0 mode shift */
+#define LED1_MODE_SHIFT 4 /* LED1 mode shift */
+#define LED2_MODE_SHIFT 8 /* LED2 mode shift */
+#define LED0_IV_SHIFT 12 /* LED0 input value shift */
+#define LED1_IV_SHIFT 13 /* LED1 input value shift */
+#define LED2_IV_SHIFT 14 /* LED2 input value shift */
+
+#endif /* _MACH_ADM5120_SWITCH_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
new file mode 100644
index 0000000000..81d3067da3
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
@@ -0,0 +1,64 @@
+/*
+ * ADM5120 UART definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in UARTs.
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_UART_H
+#define _MACH_ADM5120_UART_H
+
+#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
+
+#define UART_REG_DATA 0x00
+#define UART_REG_RSR 0x04
+#define UART_REG_ECR UART_REG_RSR
+#define UART_REG_LCRH 0x08
+#define UART_REG_LCRM 0x0C
+#define UART_REG_LCRL 0x10
+#define UART_REG_CTRL 0x14
+#define UART_REG_FLAG 0x18
+
+/* Receive Status Register bits */
+#define UART_RSR_FE (1 << 0)
+#define UART_RSR_PE (1 << 1)
+#define UART_RSR_BE (1 << 2)
+#define UART_RSR_OE (1 << 3)
+#define UART_RSR_ERR (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE)
+
+#define UART_ECR_ALL 0xFF
+
+/* Line Control High register bits */
+#define UART_LCRH_BRK (1 << 0) /* send break */
+#define UART_LCRH_PEN (1 << 1) /* parity enable */
+#define UART_LCRH_EPS (1 << 2) /* even parity select */
+#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */
+#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */
+#define UART_LCRH_FEN (1 << 4) /* FIFO enable */
+
+#define UART_LCRH_WLEN5 (0 << 5)
+#define UART_LCRH_WLEN6 (1 << 5)
+#define UART_LCRH_WLEN7 (2 << 5)
+#define UART_LCRH_WLEN8 (3 << 5)
+
+/* Control register bits */
+#define UART_CTRL_EN (1 << 0)
+
+/* Flag register bits */
+#define UART_FLAG_CTS (1 << 0)
+#define UART_FLAG_DSR (1 << 1)
+#define UART_FLAG_DCD (1 << 2)
+#define UART_FLAG_BUSY (1 << 3)
+#define UART_FLAG_RXFE (1 << 4)
+#define UART_FLAG_TXFF (1 << 5)
+#define UART_FLAG_RXFF (1 << 6)
+#define UART_FLAG_TXFE (1 << 7)
+
+#endif /* _MACH_ADM5120_UART_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h
new file mode 100644
index 0000000000..503843db15
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h
@@ -0,0 +1,56 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size definitions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_16 0x00000010
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
new file mode 100644
index 0000000000..c6310cc6e6
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
@@ -0,0 +1,71 @@
+/*
+ * ADM5120 specific CPU feature overrides
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ADM5120 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+/* #define cpu_has_vce ? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+#define cpu_has_prefetch 1
+/* #define cpu_has_mcheck ? */
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+/* #define cpu_has_pindexed_dcache ? */
+
+/* #define cpu_icache_snoops_remote_store ? */
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+/* #define cpu_has_nofpuex ? */
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+/* #define cpu_has_inclusive_pcaches ? */
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+
+#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h
new file mode 100644
index 0000000000..7ba7efca1f
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h
@@ -0,0 +1,115 @@
+/*
+ * ADM5120 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H
+#define _ASM_MIPS_MACH_ADM5120_GPIO_H
+
+#define ARCH_NR_GPIOS 64
+
+#include <asm-generic/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_GPIO_PIN0 0
+#define ADM5120_GPIO_PIN1 1
+#define ADM5120_GPIO_PIN2 2
+#define ADM5120_GPIO_PIN3 3
+#define ADM5120_GPIO_PIN4 4
+#define ADM5120_GPIO_PIN5 5
+#define ADM5120_GPIO_PIN6 6
+#define ADM5120_GPIO_PIN7 7
+#define ADM5120_GPIO_P0L0 8
+#define ADM5120_GPIO_P0L1 9
+#define ADM5120_GPIO_P0L2 10
+#define ADM5120_GPIO_P1L0 11
+#define ADM5120_GPIO_P1L1 12
+#define ADM5120_GPIO_P1L2 13
+#define ADM5120_GPIO_P2L0 14
+#define ADM5120_GPIO_P2L1 15
+#define ADM5120_GPIO_P2L2 16
+#define ADM5120_GPIO_P3L0 17
+#define ADM5120_GPIO_P3L1 18
+#define ADM5120_GPIO_P3L2 19
+#define ADM5120_GPIO_P4L0 20
+#define ADM5120_GPIO_P4L1 21
+#define ADM5120_GPIO_P4L2 22
+#define ADM5120_GPIO_MAX 22
+#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1
+
+#define ADM5120_GPIO_LOW 0
+#define ADM5120_GPIO_HIGH 1
+
+#define ADM5120_GPIO_SWITCH 0x10
+#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
+#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
+#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
+#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
+#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
+#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
+#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
+#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
+#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
+#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
+
+extern int __adm5120_gpio0_get_value(unsigned gpio);
+extern void __adm5120_gpio0_set_value(unsigned gpio, int value);
+extern int __adm5120_gpio1_get_value(unsigned gpio);
+extern void __adm5120_gpio1_set_value(unsigned gpio, int value);
+extern int adm5120_gpio_to_irq(unsigned gpio);
+extern int adm5120_irq_to_gpio(unsigned irq);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ int ret;
+
+ switch (gpio) {
+ case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
+ ret = __adm5120_gpio0_get_value(gpio);
+ break;
+ case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
+ ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0);
+ break;
+ default:
+ ret = __gpio_get_value(gpio);
+ break;
+ }
+
+ return ret;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ switch (gpio) {
+ case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
+ __adm5120_gpio0_set_value(gpio, value);
+ break;
+ case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
+ __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value);
+ break;
+ default:
+ __gpio_set_value(gpio, value);
+ break;
+ }
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return adm5120_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return adm5120_irq_to_gpio(irq);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h
new file mode 100644
index 0000000000..b0350c8b83
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h
@@ -0,0 +1,43 @@
+/*
+ * ADM5120 specific IRQ numbers
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
+#define _ASM_MIPS_MACH_ADM5120_IRQ_H
+
+#define MIPS_CPU_IRQ_BASE 0
+#define NR_IRQS 24
+
+#include_next <irq.h>
+
+#include <asm/mach-adm5120/adm5120_intc.h>
+
+#define NO_IRQ (-1)
+
+#define MIPS_CPU_IRQ_COUNT 8
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+
+#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
+#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
+
+#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2)
+#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7)
+
+#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
+#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
+#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
+#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
+#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
+#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
+#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
+#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
+#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
+#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
+
+#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h
new file mode 100644
index 0000000000..fa42bf7148
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h
@@ -0,0 +1,17 @@
+/*
+ * ADMBoot specific definitions
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ADMBOOT_H
+#define _ADMBOOT_H
+
+extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
+
+#endif /* _ADMBOOT_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h
new file mode 100644
index 0000000000..0cb3eee70e
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h
@@ -0,0 +1,18 @@
+/*
+ * Broadcom's CFE definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h
new file mode 100644
index 0000000000..778df24677
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h
@@ -0,0 +1,18 @@
+/*
+ * Generic prom definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h
new file mode 100644
index 0000000000..ea8db81ed3
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h
@@ -0,0 +1,179 @@
+/*
+ * Compex's MyLoader specific definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ * <header>
+ * [<block descriptor 0>]
+ * ...
+ * [<block descriptor n>]
+ * <null block descriptor>
+ * [<block data 0>]
+ * ...
+ * [<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE 0x4C594D00
+#define MYLO_MAGIC_20021103 0x20021103
+#define MYLO_MAGIC_20021107 0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
+#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX 0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G 0x0078
+#define DEVID_COMPEX_NP28G 0x044C
+#define DEVID_COMPEX_NP28GHS 0x044E
+#define DEVID_COMPEX_WP54Gv1C 0x0514
+#define DEVID_COMPEX_WP54G 0x0515
+#define DEVID_COMPEX_WP54AG 0x0546
+#define DEVID_COMPEX_WPP54AG 0x0550
+#define DEVID_COMPEX_WPP54G 0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18 0x047E
+#define DEVID_COMPEX_NP18A 0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M 0x03E8
+#define DEVID_COMPEX_NP26G16M 0x03E9
+
+struct mylo_fw_header {
+ uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
+ uint32_t crc; /* CRC of the whole firmware */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint16_t vid; /* vendor ID */
+ uint16_t did; /* device ID */
+ uint16_t svid; /* sub vendor ID */
+ uint16_t sdid; /* sub device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi; /* FIXME: firmware version high? */
+ uint32_t fwlo; /* FIXME: firmware version low? */
+ uint32_t flags; /* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+ uint32_t type; /* block type */
+ uint32_t addr; /* relative address to flash start */
+ uint32_t dlen; /* size of block data in bytes */
+ uint32_t blen; /* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED 0
+#define FW_DESC_TYPE_USED 1
+
+struct mylo_partition {
+ uint16_t flags; /* partition flags */
+ uint16_t type; /* type of the partition */
+ uint32_t addr; /* relative address of the partition from the
+ flash start */
+ uint32_t size; /* size of the partition in bytes */
+ uint32_t param; /* if this is the active partition, the
+ MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
+ * MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
+ * before decompression */
+#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE 0
+#define PARTITION_TYPE_USED 1
+
+#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
+ partition table */
+
+struct mylo_partition_table {
+ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint32_t res2; /* unknown/unused */
+ struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+ uint32_t len; /* length of the partition data */
+ uint32_t crc; /* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t mylo_ver;
+ uint16_t vid; /* Vendor ID */
+ uint16_t did; /* Device ID */
+ uint16_t svid; /* Sub Vendor ID */
+ uint16_t sdid; /* Sub Device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi;
+ uint32_t fwlo;
+ uint32_t tftp_addr;
+ uint32_t prog_start;
+ uint32_t flash_size; /* Size of boot FLASH in bytes */
+ uint32_t dram_size; /* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+ uint8_t mac[6];
+ uint8_t csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
+ in the board parameters */
+
+struct mylo_board_params {
+ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t res2;
+ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+struct myloader_info {
+ u32 vid;
+ u32 did;
+ u32 svid;
+ u32 sdid;
+ uint8_t macs[MYLO_ETHADDR_COUNT][6];
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
new file mode 100644
index 0000000000..91ac05a630
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
@@ -0,0 +1,36 @@
+/*
+ * Mikrotik's RouterBOOT definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_ROUTERBOOT_H_
+#define _PROM_ROUTERBOOT_H_
+
+struct rb_bios_settings {
+ u32 hs_offs; /* hard settings offset */
+ u32 hs_size; /* hard settings size */
+ u32 fw_offs; /* firmware offset */
+ u32 ss_offs; /* soft settings offset */
+ u32 ss_size; /* soft settings size */
+};
+
+struct rb_hard_settings {
+ char *name; /* board name */
+ char *bios_ver; /* BIOS version */
+ u32 mem_size; /* memory size in bytes */
+ u32 mac_count; /* number of mac addresses */
+ u8 *mac_base; /* mac address base */
+};
+
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
+extern struct rb_hard_settings rb_hs;
+
+#endif /* _PROM_ROUTERBOOT_H_ */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h
new file mode 100644
index 0000000000..d1e3e5b941
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h
@@ -0,0 +1,86 @@
+/*
+ * ZyNOS (ZyXEL's Networking OS) definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ZYNOS_H
+#define _ZYNOS_H
+
+#define ZYNOS_NAME_LEN 32
+#define ZYNOS_FEAT_BYTES 22
+#define ZYNOS_MAC_LEN 6
+
+struct zynos_board_info {
+ unsigned char vendor[ZYNOS_NAME_LEN];
+ unsigned char product[ZYNOS_NAME_LEN];
+ u32 bootext_addr;
+ u32 res0;
+ u16 board_id;
+ u8 res1[6];
+ u8 feat_other[ZYNOS_FEAT_BYTES];
+ u8 feat_main;
+ u8 res2;
+ u8 mac[ZYNOS_MAC_LEN];
+ u8 country;
+ u8 dbgflag;
+} __attribute__ ((packed));
+
+/*
+ * Vendor IDs
+ */
+#define ZYNOS_VENDOR_ID_ZYXEL 0
+#define ZYNOS_VENDOR_ID_NETGEAR 1
+#define ZYNOS_VENDOR_ID_DLINK 2
+#define ZYNOS_VENDOR_ID_OTHER 3
+#define ZYNOS_VENDOR_ID_LUCENT 4
+
+/*
+ * Vendor names
+ */
+#define ZYNOS_VENDOR_DLINK "D-Link"
+#define ZYNOS_VENDOR_LUCENT "LUCENT"
+#define ZYNOS_VENDOR_NETGEAR "NetGear"
+#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
+
+/*
+ * Board IDs (big-endian)
+ */
+#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
+#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
+#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
+#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
+#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
+#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
+#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
+#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
+#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
+#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
+#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
+#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
+#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/
+#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
+#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
+#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
+
+/*
+ * Some magic numbers (big-endian)
+ */
+#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
+#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
+
+struct bootbase_info {
+ u16 vendor_id;
+ u16 board_id;
+ u8 mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
+#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h
new file mode 100644
index 0000000000..87c35f375b
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
+#define __ASM_MIPS_MACH_ADM5120_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c
new file mode 100644
index 0000000000..f8d359806a
--- /dev/null
+++ b/target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c
@@ -0,0 +1,277 @@
+/*
+ * ADM5120 PCI Host Controller driver
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
+ * done by Jeroen Vreeken
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ * Jeroen's code was based on the Linux 2.4.xx source codes found in various
+ * tarballs released by Edimax for it's ADM5120 based devices
+ * Copyright (C) ADMtek Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/pci_regs.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(f, a...) printk(KERN_DEBUG f, ## a)
+#else
+#define DBG(f, a...) do {} while (0)
+#endif
+
+#define PCI_ENABLE 0x80000000
+
+/* -------------------------------------------------------------------------*/
+
+static unsigned int adm5120_pci_nr_irqs __initdata;
+static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
+
+static DEFINE_SPINLOCK(pci_lock);
+
+/* -------------------------------------------------------------------------*/
+
+static inline void write_cfgaddr(u32 addr)
+{
+ __raw_writel((addr | PCI_ENABLE),
+ (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
+}
+
+static inline void write_cfgdata(u32 data)
+{
+ __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
+}
+
+static inline u32 read_cfgdata(void)
+{
+ return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
+}
+
+static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+ return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
+ (where & 0xFC);
+}
+
+/* -------------------------------------------------------------------------*/
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ u32 data;
+
+ spin_lock_irqsave(&pci_lock, flags);
+
+ write_cfgaddr(mkaddr(bus, devfn, where));
+ data = read_cfgdata();
+
+ DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ where, size, data);
+
+ switch (size) {
+ case 1:
+ if (where & 1)
+ data >>= 8;
+ if (where & 2)
+ data >>= 16;
+ data &= 0xFF;
+ break;
+ case 2:
+ if (where & 2)
+ data >>= 16;
+ data &= 0xFFFF;
+ break;
+ }
+
+ *val = data;
+ DBG(", 0x%08X returned\n", data);
+
+ spin_unlock_irqrestore(&pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ unsigned long flags;
+ u32 data;
+ int s;
+
+ spin_lock_irqsave(&pci_lock, flags);
+
+ write_cfgaddr(mkaddr(bus, devfn, where));
+ data = read_cfgdata();
+
+ DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ where, size, data);
+
+ switch (size) {
+ case 1:
+ s = ((where & 3) << 3);
+ data &= ~(0xFF << s);
+ data |= ((val & 0xFF) << s);
+ break;
+ case 2:
+ s = ((where & 2) << 4);
+ data &= ~(0xFFFF << s);
+ data |= ((val & 0xFFFF) << s);
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ write_cfgdata(data);
+ DBG(", 0x%08X written\n", data);
+
+ spin_unlock_irqrestore(&pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
+
+/* -------------------------------------------------------------------------*/
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn != 0)
+ return;
+
+ /* setup COMMAND register */
+ pci_write_config_word(dev, PCI_COMMAND,
+ (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
+
+ /* setup CACHE_LINE_SIZE register */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+
+ /* setup BARS */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
+ adm5120_pci_fixup);
+
+/* -------------------------------------------------------------------------*/
+
+void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
+ struct adm5120_pci_irq *map)
+{
+ adm5120_pci_nr_irqs = nr_irqs;
+ adm5120_pci_irq_map = map;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq = -1;
+ int i;
+
+ if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
+ printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
+ goto out;
+ }
+
+ if (slot < 1 || slot > 4) {
+ printk(KERN_ALERT "PCI: slot number %u is not supported\n",
+ slot);
+ goto out;
+ }
+
+ for (i = 0; i < adm5120_pci_nr_irqs; i++) {
+ if ((adm5120_pci_irq_map[i].slot == slot)
+ && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
+ && (adm5120_pci_irq_map[i].pin == pin)) {
+ irq = adm5120_pci_irq_map[i].irq;
+ break;
+ }
+ }
+
+ if (irq < 0) {
+ printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
+ pci_name((struct pci_dev *)dev), pin);
+ } else {
+ printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
+ pci_name((struct pci_dev *)dev), pin, irq);
+ }
+
+out:
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/* -------------------------------------------------------------------------*/
+
+static struct resource pci_io_resource = {
+ .name = "ADM5120 PCI I/O",
+ .start = ADM5120_PCIIO_BASE,
+ .end = ADM5120_PCICFG_ADDR-1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ .name = "ADM5120 PCI MEM",
+ .start = ADM5120_PCIMEM_BASE,
+ .end = ADM5120_PCIIO_BASE-1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+ .pci_ops = &adm5120_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+};
+
+static int __init adm5120_pci_setup(void)
+{
+ if (adm5120_package_pqfp()) {
+ printk(KERN_INFO "PCI: not available on ADM5120P\n");
+ return -1;
+ }
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00000000;
+ PCIBIOS_MIN_MEM = 0x00000000;
+
+ /* Set I/O resource limits. */
+ ioport_resource.end = 0x1fffffff;
+ iomem_resource.end = 0xffffffff;
+
+ register_pci_controller(&adm5120_controller);
+ return 0;
+}
+
+arch_initcall(adm5120_pci_setup);