cleanup patches * nuke patches for 2.6.21 * refresh patches for 2.6.22

SVN-Revision: 8122

13 files changed, 1 insertions, 572 deletions

diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
index 184d9fbadd..574b2d2158 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
@@ -2,7 +2,7 @@ Index: linux-2.6.22.1/drivers/mtd/Kconfig
 ===================================================================
 --- linux-2.6.22.1.orig/drivers/mtd/Kconfig
 +++ linux-2.6.22.1/drivers/mtd/Kconfig
-@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
+@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
  
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
deleted file mode 100644
index c1b2688d5a..0000000000
--- a/target/linux/adm5120-2.6/patches/001-adm5120.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-Index: linux-2.6.21.1/arch/mips/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/Kconfig
-+++ linux-2.6.21.1/arch/mips/Kconfig
-@@ -16,6 +16,17 @@ choice
- 	prompt "System type"
- 	default SGI_IP22
-
-+config MIPS_ADM5120
-+	bool "Support for ADM5120 SoC"
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select GENERIC_GPIO
-+
- config MIPS_MTX1
- 	bool "4G Systems MTX-1 board"
- 	select DMA_NONCOHERENT
-@@ -766,6 +775,7 @@
-
- endchoice
-
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
-Index: linux-2.6.21.1/arch/mips/Makefile
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/Makefile
-+++ linux-2.6.21.1/arch/mips/Makefile
-@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
- load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
-
- #
-+# ADMtek 5120
-+#
-+
-+core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
-+cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.21.1/include/asm-mips/bootinfo.h
-@@ -213,6 +213,57 @@
- #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
- #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
-
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_GROUP_ADM5120	23
-+#define MACH_ADM5120_UNKNOWN	0	/* Unknown board */
-+#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
-+#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G	4	/* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG	5	/* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G	6	/* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS	7	/* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G	8	/* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C	9	/* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111	10	/* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112	11	/* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133	12	/* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C	13	/* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150	14	/* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153	15	/* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100	16	/* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334	17	/* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U	18	/* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W	19	/* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH	20	/* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD	21	/* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT	22	/* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335	23	/* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS	24	/* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U	25	/* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108	26	/* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F	27	/* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G	28	/* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC	29	/* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR	30	/* ZyXEL Ethernet Switch 2108-PWR */
-+#define MACH_ADM5120_ES2024A	31	/* ZyXEL Ethernet Switch 2024A */
-+#define MACH_ADM5120_ES2024PWR	32	/* ZyXEL Ethernet Switch 2024PWR */
-+#define MACH_ADM5120_CAS630	33	/* Cellvision CAS-630/630W */
-+#define MACH_ADM5120_CAS670	34	/* Cellvision CAS-670/670W */
-+#define MACH_ADM5120_CAS700	36	/* Cellvision CAS-700/700W */
-+#define MACH_ADM5120_CAS771	37	/* Cellvision CAS-771/771W */
-+#define MACH_ADM5120_CAS790	38	/* Cellvision CAS-790 */
-+#define MACH_ADM5120_CAS861	39	/* Cellvision CAS-861/861W */
-+#define MACH_ADM5120_NFS101U	40	/* Cellvision NFS-101U/101WU */
-+#define MACH_ADM5120_NFS202U	41	/* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120	43	/* Infineon EASY 5120 */
-+#define MACH_ADM5120_EASY5120RT 44	/* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120PATA 45	/* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY83000	46	/* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K	47	/* Edimax BR-6104K */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
deleted file mode 100644
index c6237c6dd0..0000000000
--- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig
-@@ -605,5 +605,10 @@ config MTD_PLATRAM
- 
- 	  This selection automatically selects the map_ram driver.
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADMtek ADM5120 boards"
-+	depends on MIPS_ADM5120
-+	select MTD_CFI_AMDSTD
-+
- endmenu
- 
-Index: linux-2.6.21.1/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.21.1/drivers/mtd/maps/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)      	+= adm5120_mtd.o
- obj-$(CONFIG_MTD_LASAT)		+= lasat.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
deleted file mode 100644
index cbd28b1aa8..0000000000
--- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Index: linux-2.6.21.1/drivers/net/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/net/Kconfig
-+++ linux-2.6.21.1/drivers/net/Kconfig
-@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_ADM5120_ENET
-+	tristate "MIPS ADM5120 Ethernet switch support"
-+	depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
- 	tristate "SB1250 Ethernet support"
- 	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.21.1/drivers/net/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/net/Makefile
-+++ linux-2.6.21.1/drivers/net/Makefile
-@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
- 
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
deleted file mode 100644
index 8a6d0205e2..0000000000
--- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Index: linux-2.6.21.1/drivers/serial/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/serial/Makefile
-+++ linux-2.6.21.1/drivers/serial/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.21.1/include/linux/serial_core.h
-===================================================================
---- linux-2.6.21.1.orig/include/linux/serial_core.h
-+++ linux-2.6.21.1/include/linux/serial_core.h
-@@ -135,6 +135,9 @@
- /* Xilinx uartlite */
- #define PORT_UARTLITE	74
- 
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120	68
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>
-Index: linux-2.6.21.1/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/serial/Kconfig
-+++ linux-2.6.21.1/drivers/serial/Kconfig
-@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00
- 
- comment "Non-8250 serial port support"
- 
-+config SERIAL_ADM5120
-+       bool "ADM5120 serial port support"
-+       depends on MIPS_ADM5120
-+       select SERIAL_CORE
-+       select SERIAL_CORE_CONSOLE
-+       help
-+         Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+       int "Maximum number of ADM5120 serial ports"
-+       depends on SERIAL_ADM5120
-+       default "2"
-+       ---help---
-+         Set this to the number of serial ports you want the driver to
-+         support.
-+
- config SERIAL_AMBA_PL010
- 	tristate "ARM AMBA PL010 serial port support"
- 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
deleted file mode 100644
index f48b0f96c3..0000000000
--- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-Index: linux-2.6.21.1/drivers/usb/core/hub.c
-===================================================================
---- linux-2.6.21.1.orig/drivers/usb/core/hub.c
-+++ linux-2.6.21.1/drivers/usb/core/hub.c
-@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru
- 					USB_DT_DEVICE << 8, 0,
- 					buf, GET_DESCRIPTOR_BUFSIZE,
- 					(i ? USB_CTRL_GET_TIMEOUT : 1000));
-+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
-+buf->bDescriptorType, USB_DT_DEVICE);
- 				switch (buf->bMaxPacketSize0) {
- 				case 8: case 16: case 32: case 64: case 255:
- 					if (buf->bDescriptorType ==
-Index: linux-2.6.21.1/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.21.1/drivers/usb/host/Kconfig
-@@ -224,3 +224,6 @@ config USB_SL811_CS
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called "sl811_cs".
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support"
-+	depends on USB && MIPS_ADM5120
-Index: linux-2.6.21.1/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/usb/host/Makefile
-+++ linux-2.6.21.1/drivers/usb/host/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd
- obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
- obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
-Index: linux-2.6.21.1/drivers/usb/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/usb/Kconfig
-+++ linux-2.6.21.1/drivers/usb/Kconfig
-@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig"
- 
- source "drivers/usb/net/Kconfig"
- 
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
- 	depends on USB
- 
-Index: linux-2.6.21.1/drivers/usb/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/usb/Makefile
-+++ linux-2.6.21.1/drivers/usb/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
- obj-$(CONFIG_USB_U132_HCD)	+= host/
- obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
- obj-$(CONFIG_USB_OHCI_AT91)	+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
- 
- obj-$(CONFIG_USB_ACM)		+= class/
- obj-$(CONFIG_USB_PRINTER)	+= class/
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
deleted file mode 100644
index ac654a017e..0000000000
--- a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: linux-2.6.21.1/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Kconfig
-+++ linux-2.6.21.1/drivers/leds/Kconfig
-@@ -19,6 +19,27 @@ config LEDS_CLASS
- 
- comment "LED drivers"
- 
-+config LEDS_GPIO
-+	tristate "LED support for LEDS on GPIO lines"
-+	depends on LEDS_CLASS && GENERIC_GPIO
-+	help
-+	  This option enables support for LEDs connected to GPIO lines
-+
-+config LEDS_ADM5120
-+	tristate "LED Support for ADM5120 GPIO LEDs"
-+	depends on LEDS_GPIO && MIPS_ADM5120
-+	help
-+	  This option enables support for LEDs connected to GPIO lines
-+	  on ADM5120 SoC based platforms.
-+
-+config LEDS_ADM5120_EXPERIMENTAL
-+	bool "Enable ADM5120 LEDs experimental code"
-+	depends on LEDS_ADM5120
-+
-+config LEDS_ADM5120_DIAG
-+	bool "Enable ADM5120 LEDs diagnostic mode"
-+	depends on LEDS_ADM5120
-+
- config LEDS_CORGI
- 	tristate "LED Support for the Sharp SL-C7x0 series"
- 	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.21.1/drivers/leds/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/leds/Makefile
-+++ linux-2.6.21.1/drivers/leds/Makefile
-@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
- obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
- 
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_GPIO)		+= leds-gpio.o
-+obj-$(CONFIG_LEDS_ADM5120)		+= leds-adm5120.o
- obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
deleted file mode 100644
index 1098a24ba8..0000000000
--- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Index: linux-2.6.21.1/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/pci/Makefile
-+++ linux-2.6.21.1/arch/mips/pci/Makefile
-@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.21.1/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.21.1.orig/include/linux/pci_ids.h
-+++ linux-2.6.21.1/include/linux/pci_ids.h
-@@ -1701,6 +1701,9 @@
- #define PCI_VENDOR_ID_ESDGMBH		0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
deleted file mode 100644
index 6b0fe55edf..0000000000
--- a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- linux-2.6.19.2/include/asm-mips/byteorder.h	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h	2007-05-16 21:14:47.000000000 +0200
-@@ -58,6 +58,35 @@
- 
- #endif /* CONFIG_CPU_MIPSR2 */
- 
-+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
-+
-+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
-+{
-+	__asm__ (
-+	"	sh	%2, 0xCA(%1)			\n"
-+	"	lhu	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
-+{
-+	__asm__ (
-+	"	sw	%2, 0xC8(%1)			\n"
-+	"	lw	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+#define __arch__swab16(x)	___adm5120__swab16(x)
-+#define __arch__swab32(x)	___adm5120__swab32(x)
-+
-+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
-+
- #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- #  define __BYTEORDER_HAS_U64__
- #  define __SWAB_64_THRU_32__
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
deleted file mode 100644
index 88b90454a8..0000000000
--- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.21.1/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/Kconfig
-@@ -157,6 +157,22 @@ config MTD_AFS_PARTS
- 	  for your particular device. It won't happen automatically. The
- 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on MIPS_ADM5120 && MTD_PARTITIONS
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 	depends on MTD
- 
-Index: linux-2.6.21.1/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/Makefile
-+++ linux-2.6.21.1/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
deleted file mode 100644
index 84fc8652f4..0000000000
--- a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-Index: linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.21.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -47,12 +47,19 @@
- #define MANUFACTURER_AMD	0x0001
- #define MANUFACTURER_ATMEL	0x001F
- #define MANUFACTURER_SST	0x00BF
-+#define MANUFACTURER_MACRONIX	0x00C2
- #define SST49LF004B	        0x0060
- #define SST49LF040B	        0x0050
- #define SST49LF008A		0x005a
- #define AT49BV6416		0x00d6
- #define MANUFACTURER_SAMSUNG	0x00ec
- 
-+/* Macronix */
-+#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
-+#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct 
- 	mtd->flags |= MTD_STUPID_LOCK;
- }
- 
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+	__u8 t;
-+
-+	switch (cfi->id) {
-+	/* TODO: put affected chip ids here */
-+	case MX29LV160B:
-+	case MX29LV320B:
-+		t = 2;	/* Bottom boot */
-+		break;
-+	case MX29LV160T:
-+	case MX29LV320T:
-+		t = 3;	/* Top boot */
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (extp->TopBottom == t)
-+		/* boot location detected by the CFI layer is correct */
-+		return;
-+
-+	extp->TopBottom = t;
-+	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
- 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
- 	{ 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.21.5/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.21.5.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.21.5/drivers/mtd/chips/Kconfig
-@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD
- 	  provides support for one of those command sets, used on chips
- 	  including the AMD Am29LV320.
- 
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	bool "Force bottom boot for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have no/wrong boot-block location in the
-+	  CFI table, and the driver may detect the type incorrectly. Select
-+	  this if your board has such chip.
-+
- config MTD_CFI_STAA
- 	tristate "Support for ST (Advanced Architecture) flash chips"
- 	depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
deleted file mode 100644
index d5edc23dce..0000000000
--- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: linux-2.6.21.1/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.21.1.orig/arch/mips/kernel/head.S
-+++ linux-2.6.21.1/arch/mips/kernel/head.S
-@@ -129,14 +129,19 @@
- #endif
- 	.endm
- 
--
- 	j kernel_entry
- 	nop
--
-+	nop
-+	
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-+	 * Use as temporary storage for the kernel command line, so that it
-+	 * can be updated easily without having to relink the kernel.
- 	 */
-+	 
-+EXPORT(_image_cmdline)
-+	.ascii "CMDLINE:"
- 	.align 10
- 
- EXPORT(stext)					# used for profiling
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
deleted file mode 100644
index 8929a73fbb..0000000000
--- a/target/linux/adm5120-2.6/patches/500-Nand.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig
-@@ -75,6 +75,12 @@ config MTD_NAND_TS7250
- 	help
- 	  Support for NAND flash on Technologic Systems TS-7250 platform.
- 
-+config MTD_NAND_RB100
-+	tristate "NAND Flash device on RB100 board"
-+	depends on MTD_NAND
-+	help
-+	  Support for NAND flash on RB100 platform.
-+
- config MTD_NAND_IDS
- 	tristate
- 
-Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.21.1/drivers/mtd/nand/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
- obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
-+obj-$(CONFIG_MTD_NAND_RB100)		+= rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o