diff options
| author | David Bauer <mail@david-bauer.net> | 2018-12-27 02:32:38 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2018-12-27 14:06:38 +0100 |
| commit | 1724d4e9ed7716a5444eca42adf045c2f3afc554 (patch) | |
| tree | 633979e9b4ba8d4ca6693c06ac8aae889c6d3a49 /target/Config.in | |
| parent | 8471944325db80ca37f7c756130070d0add58ff6 (diff) | |
| download | upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.gz upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.bz2 upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.zip | |
ath79: add support for devolo WiFi pro 1200e
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
1x Atheros AR8033
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/Config.in')
0 files changed, 0 insertions, 0 deletions