diff options
author | Weijie Gao <hackpascal@gmail.com> | 2018-12-29 17:22:32 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-12-30 20:08:13 +0100 |
commit | abc7ed2c58860fc1363129efbe9e8c60f81a802c (patch) | |
tree | 972d250921df3ca509c8a98aa514a0e774c1e5b6 /scripts/flashing | |
parent | fd35c5b205e7583628472b607ee4eb41c6d1b6d5 (diff) | |
download | upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.gz upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.bz2 upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.zip |
ath79: add support for D-Link DIR-859 A1
Hardware spec of DIR-859 A1:
SoC: QCA9563
DRAM: 64MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9880
USB is supported on the PCB but not connected.
Flash instructions:
1. Upgrade the factory.bin through the factory web interface or the u-boot
failsafe interface.
The firmware will boot up correctly for the first time.
Do not power off the device after OpenWrt has booted. Otherwise the u-boot
will enter failsafe mode as the checksum of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
After upgrading completes the u-boot won't complain about the firmware
checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin, just
upgrade the factory.bin through the u-boot failsafe interface and then goto
step 2.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
[squash commits, use common seama recipes, sync factory image recipe
with ramips version]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'scripts/flashing')
0 files changed, 0 insertions, 0 deletions