diff options
author | Birger Koblitz <git@birger-koblitz.de> | 2021-12-31 12:51:45 +0100 |
---|---|---|
committer | Daniel Golle <daniel@makrotopia.org> | 2022-02-17 15:21:47 +0000 |
commit | 47f5a0a3eed593e147ee1bdd36ea532ee266ba18 (patch) | |
tree | aabc16e06a03863b5a7cf9153132ddc1215eed1a /scripts/check-toolchain-clean.sh | |
parent | 0a7565e53653f3e5a3448ef892b414187b8abba2 (diff) | |
download | upstream-47f5a0a3eed593e147ee1bdd36ea532ee266ba18.tar.gz upstream-47f5a0a3eed593e147ee1bdd36ea532ee266ba18.tar.bz2 upstream-47f5a0a3eed593e147ee1bdd36ea532ee266ba18.zip |
realtek: Add support for ZyXEL GS1900-48 Switch
The GS1900-48 is a 48 + 2 port Gigabit L2 switch with 48 gigabit ports.
Hardware:
RTL8393M SoC
Macronix MX25l12805D (16MB flash)
128MB RAM
6 * RTL8218B external PHY
2 * RTL8231 GPIO extenders to control the port LEDs, system LED and
Reset button
2 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules.
Power is supplied via a 230 volt mains connector.
The board has a hard reset switch SW1, which is is not reachable from the outside.
J4 provides a 12V RS232 serial connector which is connected through U8 to
the 3.3V UART of the RTL8393. Conversion is done by U8, a SIPEX 3232EC.
To connect to the UART, wires can be soldered to R603 (TX) and R602 (RX).
Installation:
Install the squashfs image via Realtek's original Web-Interface.
Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
Diffstat (limited to 'scripts/check-toolchain-clean.sh')
0 files changed, 0 insertions, 0 deletions