diff options
| author | Igor Nazarov <tigron.dev@gmail.com> | 2022-03-17 00:51:35 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-03-19 19:51:20 +0100 |
| commit | 42626aef676d2ca1ea1577b7a47ba8e4135f1a4c (patch) | |
| tree | ffc5ce3e299072e2945dee7e8e65e3c41a9045b8 /scripts/arm-magic.sh | |
| parent | 1eb5d50fd3dff15a2e316fcfa3c25597be429526 (diff) | |
| download | upstream-42626aef676d2ca1ea1577b7a47ba8e4135f1a4c.tar.gz upstream-42626aef676d2ca1ea1577b7a47ba8e4135f1a4c.tar.bz2 upstream-42626aef676d2ca1ea1577b7a47ba8e4135f1a4c.zip | |
ramips: add support for D-Link DIR-878 R1
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MT7615N (2.4GHz) and MT7615N (5Ghz)
- Switch: 1 WAN, 4 LAN (Gigabit)
- Buttons: Reset, WiFi Toggle, WPS
- LEDs: Power, Internet, WiFi 2.4G WiFi 5G
The R1 revision is identical to the A1 revision except
- No Config2 Parition, therefore
- factory partition resized to 64k from 128K
- Firmware partition offset is 0x50000 not 0x60000
- Firmware partitions size increased by 64K
- Firmware partition type is "denx,uimage", not "sge,uimage"
- Padding of image creation "uimage-padhdr 96" removed
Installation:
Update to the last D-Link firmware through web-ui before OpenWRT
installation then follow the instructions to patch your device using
D-Link FailsafeUI.
- D-Link FailsafeUI:
Power down the router, press and hold the reset button, then
re-plug it. Keep the reset button pressed until the internet LED stops
flashing, then jack into any lan port and manually assign a static IP
address in 192.168.0.0/24 other than 192.168.0.1 (e.g. 192.168.0.2)
and go to http://192.168.0.1
Flash with the factory image.
Signed-off-by: Igor Nazarov <tigron.dev@gmail.com>
Diffstat (limited to 'scripts/arm-magic.sh')
0 files changed, 0 insertions, 0 deletions