diff options
| author | Filip Moc <lede@moc6.cz> | 2020-11-18 20:36:12 +0100 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2020-11-22 21:13:39 +0000 |
| commit | 9ebbb5511392571c008f92f37bf477d04c2f4d88 (patch) | |
| tree | b40788e2d08718ca6b1f508bcff6eb390bab77e8 /package | |
| parent | 2b3a0cabea33763775dbc4b8aab5f54a377bd71e (diff) | |
| download | upstream-9ebbb5511392571c008f92f37bf477d04c2f4d88.tar.gz upstream-9ebbb5511392571c008f92f37bf477d04c2f4d88.tar.bz2 upstream-9ebbb5511392571c008f92f37bf477d04c2f4d88.zip | |
uqmi: add support for IPv4 autoconf from QMI
There already was an option for autoconfiguring IPv4 from QMI but this
was removed by commit 3b9b963e6e08 ("uqmi: always use DHCP for IPv4").
DHCP does not work on MR400 LTE module (in TL-MR6400 v4) so let's readd
support for IPv4 autoconf from QMI but this time allow to configure this
for IPv4 and IPv6 independently and keep DHCP default on IPv4.
Signed-off-by: Filip Moc <lede@moc6.cz>
Diffstat (limited to 'package')
| -rw-r--r-- | package/network/utils/uqmi/Makefile | 2 | ||||
| -rwxr-xr-x | package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh | 49 |
2 files changed, 39 insertions, 12 deletions
diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile index dee4bd051e..4a15a15c19 100644 --- a/package/network/utils/uqmi/Makefile +++ b/package/network/utils/uqmi/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uqmi -PKG_RELEASE:=7 +PKG_RELEASE:=8 PKG_SOURCE_PROTO:=git PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index 31c2656142..a77523cd40 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -19,6 +19,7 @@ proto_qmi_init_config() { proto_config_add_string modes proto_config_add_string pdptype proto_config_add_int profile + proto_config_add_boolean dhcp proto_config_add_boolean dhcpv6 proto_config_add_boolean autoconnect proto_config_add_int plmn @@ -31,13 +32,13 @@ proto_qmi_setup() { local interface="$1" local dataformat connstat local device apn auth username password pincode delay modes pdptype - local profile dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS + local profile dhcp dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS local ip4table ip6table local cid_4 pdh_4 cid_6 pdh_6 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6 json_get_vars device apn auth username password pincode delay modes - json_get_vars pdptype profile dhcpv6 autoconnect plmn ip4table + json_get_vars pdptype profile dhcp dhcpv6 autoconnect plmn ip4table json_get_vars ip6table timeout mtu $PROTO_DEFAULT_OPTIONS [ "$timeout" = "" ] && timeout="10" @@ -353,15 +354,41 @@ proto_qmi_setup() { } [ -n "$pdh_4" ] && { - json_init - json_add_string name "${interface}_4" - json_add_string ifname "@$interface" - json_add_string proto "dhcp" - [ -n "$ip4table" ] && json_add_string ip4table "$ip4table" - proto_add_dynamic_defaults - [ -n "$zone" ] && json_add_string zone "$zone" - json_close_object - ubus call network add_dynamic "$(json_dump)" + if [ "$dhcp" = 0 ]; then + json_load "$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)" + json_select ipv4 + json_get_var ip_4 ip + json_get_var gateway_4 gateway + json_get_var dns1_4 dns1 + json_get_var dns2_4 dns2 + json_get_var subnet_4 subnet + + proto_init_update "$ifname" 1 + proto_set_keep 1 + proto_add_ipv4_address "$ip_4" "$subnet_4" + proto_add_ipv4_route "$gateway_4" "128" + [ "$defaultroute" = 0 ] || proto_add_ipv4_route "0.0.0.0" 0 "$gateway_4" + [ "$peerdns" = 0 ] || { + proto_add_dns_server "$dns1_4" + proto_add_dns_server "$dns2_4" + } + [ -n "$zone" ] && { + proto_add_data + json_add_string zone "$zone" + proto_close_data + } + proto_send_update "$interface" + else + json_init + json_add_string name "${interface}_4" + json_add_string ifname "@$interface" + json_add_string proto "dhcp" + [ -n "$ip4table" ] && json_add_string ip4table "$ip4table" + proto_add_dynamic_defaults + [ -n "$zone" ] && json_add_string zone "$zone" + json_close_object + ubus call network add_dynamic "$(json_dump)" + fi } } |