aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorDaniel González Cabanelas <dgcbueu@gmail.com>2023-02-21 00:43:55 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2023-02-26 22:22:48 +0100
commitbe0f1c1b268a99ea25c9797a4ed725835ca79fea (patch)
treed0dc20130b8b087d82c5bc6b653e01b184d4d208 /package
parent107f7374c9ef3e3ea6d589b187671cd3e138e63c (diff)
downloadupstream-be0f1c1b268a99ea25c9797a4ed725835ca79fea.tar.gz
upstream-be0f1c1b268a99ea25c9797a4ed725835ca79fea.tar.bz2
upstream-be0f1c1b268a99ea25c9797a4ed725835ca79fea.zip
mvebu: add support for Buffalo LinkStation LS220DE
The Buffalo LinkStation LS220DE is a dual bay NAS, based on Marvell Armada 370 Hardware: SoC: Marvell Armada 88F6707 CPU: Cortex-A9 800 MHz, 1 core Flash 1: SPI-NOR 1 MiB (U-Boot) Flash 2: NAND 512 MiB (OS) RAM: DDR3 256 MiB Ethernet: 1x 1GbE USB: 1x 2.0 SATA: 2x 3Gb/s LEDs/Input: 5x / 2x (1x button, 1x slide-switch) Fan: 1x casing Flash instructions, from hard drive: 1. Get access to the "boot" partition at the hard drive where the stock firmware is installed. It can be done with acp-commander or by plugging the hard drive to a computer. 2. Backup the stock uImage: mv /boot/uImage.buffalo /boot/uImage.buffalo.bak 3. Move and rename the Openwrt initramfs image to the boot partition: mv openwrt-initramfs-kernel.bin /boot/uImage.buffalo 4. Power on the Linkstation with the hardrive inside. Now Openwrt will boot, but still not installed. 5. Connect via ssh to OpenWrt: ssh root@192.168.1.1 6. Rename boot files inside boot partition mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo /mnt/uImage.buffalo.openwrt.bak mv /mnt/initrd.buffalo /mnt/initrd.buffalo.bak 7. Format ubi partitions at the NAND flash ("kernel_ubi" and "ubi"): ubiformat /dev/mtd0 -y ubidetach -p /dev/mtd1 ubiformat /dev/mtd1 -y 8. Flash the sysupgrade image: sysupgrade -n openwrt-squashfs-sysupgrade.bin 9. Wait until it finish, the device will reboot with OpenWrt installed on the NAND flash. Restore the stock firmware: 1. Take the hard drive used for the installation and restore boot backup files to their original names: mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo.bak /mnt/uImage.buffalo mv /mnt/initrd.buffalo.bak /mnt/initrd.buffalo 2. Boot from the hard drive and perform a stock firmware update using the Buffalo utility. The NAND will be restored to the original state. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Diffstat (limited to 'package')
-rw-r--r--package/boot/uboot-envtools/files/mvebu1
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu
index cc1c648f24..63b5132608 100644
--- a/package/boot/uboot-envtools/files/mvebu
+++ b/package/boot/uboot-envtools/files/mvebu
@@ -13,6 +13,7 @@ touch /etc/config/ubootenv
board=$(board_name)
case "$board" in
+buffalo,ls220de|\
buffalo,ls421de)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"
;;