diff options
| author | David Bauer <mail@david-bauer.net> | 2020-03-08 21:39:19 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2020-03-10 21:54:46 +0100 |
| commit | 4c8446bf39de99990847eb4bc7744e25835a34f5 (patch) | |
| tree | 8315c46efcb3a698533c22f8cedaf4a0825c7eb3 /package | |
| parent | 0c4d91f121b7a3660dbf433a8a6858573a86d137 (diff) | |
| download | upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.tar.gz upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.tar.bz2 upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.zip | |
ramips: add support for Ubiquiti UniFi nanoHD
Hardware
--------
SoC: MediaTek MT7621AT
WiFi: MediaTek MT7603 bgn 2T2R
MediaTek MT7615 ac 4T4R
Flash: 32M SPI (Macronix MX25L25635F)
RAM: 128M DDR3 (Winbond W631GG6KB)
LED: Dome (Blue / White)
BTN: Reset
Installation
------------
These instructions were written for firmware version v3.9.27.
Downgrade if necessary.
1. Copy the OpenWrt sysupgrade image to the devices /tmp folder
via scp. On factory defaults, user and password is "ubnt" at
192.168.1.20/24.
2. Write the bootselect flag. Otherwise, the device might boot from the
wrong partition. Verify the mtd partition used in the command below
is the one labled "bs" in /proc/mtd (as this might change in the
future).
> dd if=/dev/zero bs=1 count=1 of=/dev/mtd4
3. Write the OpenWrt sysupgrade to the mtd partitions labled
"kernel0" and "kernel1".
> dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock6
> dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock7
4. Reboot or powercycle the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package')
0 files changed, 0 insertions, 0 deletions