layerscape: resurrect support for FRDM-LS1012A

Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.

0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"

Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
            µUSB 2.0 (debugging & power input)
            2x 3.5mm jack for microphone & headphone (SGTL5000)
            Arduino Shield expansion with I2C, SPI, UART, and GPIO
            JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)

Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.

Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.

As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

4 files changed, 30 insertions, 0 deletions

diff --git a/package/boot/tfa-layerscape/Makefile b/package/boot/tfa-layerscape/Makefile
index a34c52bc3b..d2da84ec15 100644
--- a/package/boot/tfa-layerscape/Makefile
+++ b/package/boot/tfa-layerscape/Makefile
@@ -69,6 +69,14 @@ define Host/Install
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
 
+define Package/tfa-layerscape/ls1012afrdm
+  TITLE:=NXP LS1012AFRDM Trusted Firmware
+  PLAT:=ls1012afrdm
+  BOOT_MODE:=qspi
+  BIN_BL2:=build/ls1012afrdm/release/bl2_qspi.pbl
+  BIN_FIP:=build/ls1012afrdm/release/fip.bin
+endef
+
 define Package/tfa-layerscape/ls1012ardb
   TITLE:=NXP LS1012ARDB Trusted Firmware
   PLAT:=ls1012ardb
@@ -142,6 +150,7 @@ define Package/tfa-layerscape/ls2088ardb
 endef
 
 TFAS := \
+  ls1012afrdm \
   ls1012ardb \
   ls1012afrwy \
   ls1043ardb \
diff --git a/package/boot/uboot-layerscape/Makefile b/package/boot/uboot-layerscape/Makefile
index ddf71bd986..63c16a7db0 100644
--- a/package/boot/uboot-layerscape/Makefile
+++ b/package/boot/uboot-layerscape/Makefile
@@ -27,6 +27,12 @@ define U-Boot/Default
   ENV_SIZE:=0x2000
 endef
 
+define U-Boot/ls1012afrdm
+  NAME:=NXP LS1012AFRDM
+  UBOOT_CONFIG:=ls1012afrdm_tfa
+  ENV_SIZE:=0x40000
+endef
+
 define U-Boot/ls1012ardb
   NAME:=NXP LS1012ARDB
   UBOOT_CONFIG:=ls1012ardb_tfa
@@ -102,6 +108,7 @@ endef
 
 
 UBOOT_TARGETS := \
+  ls1012afrdm \
   ls1012ardb \
   ls1012afrwy \
   ls1043ardb \
diff --git a/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt b/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt
new file mode 100644
index 0000000000..ccc98dd299
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=ubi.mtd=8 root=ubi0:rootfs rw rootfstype=ubifs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.quadspi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(ubifs)
+bootcmd=echo starting OpenWrt ...;pfe stop;run qspi_boot
+bootdelay=3
diff --git a/package/firmware/layerscape/ls-rcw/Makefile b/package/firmware/layerscape/ls-rcw/Makefile
index 5bcbff5bc4..ddef58fa0b 100644
--- a/package/firmware/layerscape/ls-rcw/Makefile
+++ b/package/firmware/layerscape/ls-rcw/Makefile
@@ -28,6 +28,11 @@ define Package/layerscape-rcw/Config
   endef
 endef
 
+define Package/layerscape-rcw/ls1012afrdm
+  TITLE:=NXP LS1012AFRDM RCW binary
+  CONFIG:=ls1012afrdm/N_SSNP_3305/rcw_800.bin
+endef
+
 define Package/layerscape-rcw/ls1012ardb
   TITLE:=NXP LS1012ARDB RCW binary
   CONFIG:=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
@@ -86,6 +91,7 @@ define Package/layerscape-rcw/Install
 endef
 
 RCWS := \
+  ls1012afrdm \
   ls1012ardb \
   ls1012afrwy \
   ls1043ardb \