aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-12-08 15:18:17 +0900
committerChristian Lamparter <chunkeey@gmail.com>2018-12-24 19:18:07 +0100
commitc566439c9bf3cf2b4e5e5a059332c64199d97611 (patch)
tree88e55e4b1cbf4911e29df8e7ad31e341882d7aae /package
parent99df98442e1101607e3e6c902d5d957e72cea1d6 (diff)
downloadupstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.gz
upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.bz2
upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.zip
ath79: add support for NEC Aterm WG800HP
NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9563. Specification: - Qualcomm Atheros QCA9563 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2.4/5 GHz wifi - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 1T1R (QCA9887) - 4x 10/100/1000 Mbps Ethernet - 8x LEDs, 3x keys (2x buttons, 1x slide-switch) - UART through-hole on PCB (J2) - Vcc, GND, NC, TX, RX from SoC side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port on WG800HP 2. Connect power cable to WG800HP and turn on it 3. Access to "http://192.168.10.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'package')
0 files changed, 0 insertions, 0 deletions