aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-09-10 21:07:23 +0200
committerMatthias Schiffer <mschiffer@universe-factory.net>2019-11-22 22:32:58 +0100
commit6160f773fef2e204065a398abdd1504913a1bf8e (patch)
tree6b19ff777229bf21b0b9002cbd0d93513475dd70 /package
parent63b1e8f8d226231c31f710dde9cc7b3a06a5503b (diff)
downloadupstream-6160f773fef2e204065a398abdd1504913a1bf8e.tar.gz
upstream-6160f773fef2e204065a398abdd1504913a1bf8e.tar.bz2
upstream-6160f773fef2e204065a398abdd1504913a1bf8e.zip
ipq40xx: add support for AVM FRITZ!Repeater 1200
Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Diffstat (limited to 'package')
-rw-r--r--package/boot/uboot-fritz4040/Makefile7
1 files changed, 6 insertions, 1 deletions
diff --git a/package/boot/uboot-fritz4040/Makefile b/package/boot/uboot-fritz4040/Makefile
index 5bf0192fee..2130581765 100644
--- a/package/boot/uboot-fritz4040/Makefile
+++ b/package/boot/uboot-fritz4040/Makefile
@@ -26,6 +26,11 @@ define U-Boot/Default
UBOOT_IMAGE:=uboot-$(1).bin
endef
+define U-Boot/fritz1200
+ NAME:=FritzRepeater 1200
+ BUILD_DEVICES:=avm_fritzrepeater-1200
+endef
+
define U-Boot/fritz3000
NAME:=FritzRepeater 3000
BUILD_DEVICES:=avm_fritzrepeater-3000
@@ -67,6 +72,6 @@ define Package/u-boot/install
$(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/
endef
-UBOOT_TARGETS := fritz3000 fritz4040 fritz7530
+UBOOT_TARGETS := fritz1200 fritz3000 fritz4040 fritz7530
$(eval $(call BuildPackage/U-Boot))