brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

6 files changed, 25 insertions, 25 deletions

diff --git a/package/firmware/cypress-nvram/Makefile b/package/firmware/cypress-nvram/Makefile
index 418a2b0d7e..ef4044c6d0 100644
--- a/package/firmware/cypress-nvram/Makefile
+++ b/package/firmware/cypress-nvram/Makefile
@@ -34,7 +34,7 @@ endef
 define Package/cypress-nvram-43430-sdio-rpi-3b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi 3B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-3b/install
@@ -50,7 +50,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-3b))
 define Package/cypress-nvram-43430-sdio-rpi-zero-w
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi Zero W
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-zero-w/install
@@ -66,7 +66,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-zero-w))
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 3B+
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus/install
@@ -82,7 +82,7 @@ $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-3b-plus))
 define Package/cypress-nvram-43455-sdio-rpi-4b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 4B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-4b/install
diff --git a/package/kernel/brcm2708-gpu-fw/Makefile b/package/kernel/bcm27xx-gpu-fw/Makefile
index fa53f48333..bbaff39cc6 100644
--- a/package/kernel/brcm2708-gpu-fw/Makefile
+++ b/package/kernel/bcm27xx-gpu-fw/Makefile
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_NAME:=brcm2708-gpu-fw
+PKG_NAME:=bcm27xx-gpu-fw
 PKG_VERSION:=2020-01-30
 PKG_RELEASE:=63bdbe0ea609a69f5c0a2212d608ef3d9915a7ad
 
@@ -133,16 +133,16 @@ define Download/start4x_elf
 endef
 $(eval $(call Download,start4x_elf))
 
-define Package/brcm2708-gpu-fw
+define Package/bcm27xx-gpu-fw
   SECTION:=boot
   CATEGORY:=Boot Loaders
-  DEPENDS:=@TARGET_brcm2708
-  TITLE:=brcm2708-gpu-fw
-  DEFAULT:=y if TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
+  TITLE:=bcm27xx-gpu-fw
+  DEFAULT:=y if TARGET_bcm27xx
 endef
 
-define Package/brcm2708-gpu-fw/description
- GPU and kernel boot firmware for brcm2708. 
+define Package/bcm27xx-gpu-fw/description
+ GPU and kernel boot firmware for bcm27xx.
 endef
 
 define Build/Prepare
@@ -168,7 +168,7 @@ define Build/Compile
 	true
 endef
 
-define Package/brcm2708-gpu-fw/install
+define Package/bcm27xx-gpu-fw/install
 	true
 endef
 
@@ -189,4 +189,4 @@ define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/fixup4x.dat $(KERNEL_BUILD_DIR)
 endef
 
-$(eval $(call BuildPackage,brcm2708-gpu-fw))
+$(eval $(call BuildPackage,bcm27xx-gpu-fw))
diff --git a/package/kernel/linux/modules/netdevices.mk b/package/kernel/linux/modules/netdevices.mk
index 7aa97a8d9b..4fcd03ae85 100644
--- a/package/kernel/linux/modules/netdevices.mk
+++ b/package/kernel/linux/modules/netdevices.mk
@@ -125,7 +125,7 @@ $(eval $(call KernelPackage,mii))
 define KernelPackage/mdio-gpio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:= Supports GPIO lib-based MDIO busses
-  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:= \
 	CONFIG_MDIO_BITBANG \
 	CONFIG_MDIO_GPIO
@@ -320,7 +320,7 @@ $(eval $(call KernelPackage,switch-rtl8306))
 define KernelPackage/switch-rtl8366-smi
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Realtek RTL8366 SMI switch interface support
-  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:=CONFIG_RTL8366_SMI
   FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
   AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi)
diff --git a/package/kernel/mac80211/broadcom.mk b/package/kernel/mac80211/broadcom.mk
index c725c4924f..41320bcc12 100644
--- a/package/kernel/mac80211/broadcom.mk
+++ b/package/kernel/mac80211/broadcom.mk
@@ -449,7 +449,7 @@ define KernelPackage/brcmfmac/config
 
 	config BRCMFMAC_SDIO
 		bool "Enable SDIO bus interface support"
-		default y if TARGET_brcm2708
+		default y if TARGET_bcm27xx
 		default y if TARGET_sunxi
 		default n
 		help
diff --git a/package/utils/brcm2708-userland/Makefile b/package/utils/bcm27xx-userland/Makefile
index 7fea952974..718e853993 100644
--- a/package/utils/brcm2708-userland/Makefile
+++ b/package/utils/bcm27xx-userland/Makefile
@@ -7,7 +7,7 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=brcm2708-userland
+PKG_NAME:=bcm27xx-userland
 PKG_VERSION:=42ec119e03eb8dffc7c83e2ac0e665e333abbef6
 PKG_RELEASE:=1
 
@@ -34,19 +34,19 @@ include $(INCLUDE_DIR)/cmake.mk
 TAR_OPTIONS:=--strip-components 1 $(TAR_OPTIONS)
 TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
 
-define Package/brcm2708-userland
+define Package/bcm27xx-userland
   SECTION:=utils
   CATEGORY:=Utilities
-  DEPENDS:=@TARGET_brcm2708
-  TITLE:=BCM2708 userland tools
-  DEFAULT:=y if TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
+  TITLE:=BCM27xx userland tools
+  DEFAULT:=y if TARGET_bcm27xx
 endef
 
-define Package/brcm2708-userland/description
-  BCM2708 userland tools including vcgencmd and tvservice.
+define Package/bcm27xx-userland/description
+  BCM27xx userland tools including vcgencmd and tvservice.
 endef
 
-define Package/brcm2708-userland/install
+define Package/bcm27xx-userland/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtparam $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtoverlay $(1)/usr/bin
@@ -61,4 +61,4 @@ define Package/brcm2708-userland/install
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ $(1)/usr/
 endef
 
-$(eval $(call BuildPackage,brcm2708-userland))
+$(eval $(call BuildPackage,bcm27xx-userland))
diff --git a/package/utils/brcm2708-userland/patches/001-interface-vcms_host-cmake-fixes.patch b/package/utils/bcm27xx-userland/patches/001-interface-vcms_host-cmake-fixes.patch
index cb73512af9..cb73512af9 100644
--- a/package/utils/brcm2708-userland/patches/001-interface-vcms_host-cmake-fixes.patch
+++ b/package/utils/bcm27xx-userland/patches/001-interface-vcms_host-cmake-fixes.patch