aboutsummaryrefslogtreecommitdiffstats
path: root/package/utils/e2fsprogs/Makefile
diff options
context:
space:
mode:
authorDjango Armstrong <iamdjango@hotmail.com>2019-01-20 16:46:42 +0000
committerMathias Kresin <dev@kresin.me>2019-01-26 21:46:33 +0100
commit1c2f7b511514d43d8a826b26e09817b2750a2bf4 (patch)
tree1d704f9637e879606be61a01a7a3b494e5668ff8 /package/utils/e2fsprogs/Makefile
parent2a4e756085ad88969dbab32961119fe65e3b46b3 (diff)
downloadupstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.gz
upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.bz2
upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.zip
ath79: add support for Devolo WiFi Pro 1750e
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3) WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3) BTN: 1x Reset 1x WPS 1x USB eject LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports) Dupont 4 pin header Rear RJ45 serial port non-functional USB: 1x v2.0 Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password previously set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: Django Armstrong <iamdjango@hotmail.com>
Diffstat (limited to 'package/utils/e2fsprogs/Makefile')
0 files changed, 0 insertions, 0 deletions