busybox: add a reworked implementation of menuconfig support, this time with a guard option that keeps all symbols at default values until an extra option is activated

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39435

2 files changed, 1243 insertions, 0 deletions

diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
new file mode 100644
index 0000000000..26bde152c5
--- /dev/null
+++ b/package/utils/busybox/config/networking/Config.in
@@ -0,0 +1,1088 @@
+# DO NOT EDIT. This file is generated from Config.src
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Networking Utilities"
+
+config BUSYBOX_CONFIG_NAMEIF
+	bool "nameif"
+	default BUSYBOX_DEFAULT_NAMEIF
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  nameif is used to rename network interface by its MAC address.
+	  Renamed interfaces MUST be in the down state.
+	  It is possible to use a file (default: /etc/mactab)
+	  with list of new interface names and MACs.
+	  Maximum interface name length: IFNAMSIZ = 16
+	  File fields are separated by space or tab.
+	  File format:
+	  # Comment
+	  new_interface_name    XX:XX:XX:XX:XX:XX
+
+config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
+	bool "Extended nameif"
+	default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
+	depends on BUSYBOX_CONFIG_NAMEIF
+	help
+	  This extends the nameif syntax to support the bus_info, driver,
+	  phyaddr selectors. The syntax is compatible to the normal nameif.
+	  File format:
+	    new_interface_name  driver=asix bus=usb-0000:00:08.2-3
+	    new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+	    new_interface_name  phy_address=2 00:80:C8:38:91:B5
+	    new_interface_name  mac=00:80:C8:38:91:B5
+	    new_interface_name  00:80:C8:38:91:B5
+config BUSYBOX_CONFIG_NBDCLIENT
+	bool "nbd-client"
+	default BUSYBOX_DEFAULT_NBDCLIENT
+	help
+	  Network block device client
+config BUSYBOX_CONFIG_NC
+	bool "nc"
+	default BUSYBOX_DEFAULT_NC
+	help
+	  A simple Unix utility which reads and writes data across network
+	  connections.
+
+config BUSYBOX_CONFIG_NC_SERVER
+	bool "Netcat server options (-l)"
+	default BUSYBOX_DEFAULT_NC_SERVER
+	depends on BUSYBOX_CONFIG_NC
+	help
+	  Allow netcat to act as a server.
+
+config BUSYBOX_CONFIG_NC_EXTRA
+	bool "Netcat extensions (-eiw and filename)"
+	default BUSYBOX_DEFAULT_NC_EXTRA
+	depends on BUSYBOX_CONFIG_NC
+	help
+	  Add -e (support for executing the rest of the command line after
+	  making or receiving a successful connection), -i (delay interval for
+	  lines sent), -w (timeout for initial connection).
+
+config BUSYBOX_CONFIG_NC_110_COMPAT
+	bool "Netcat 1.10 compatibility (+2.5k)"
+	default BUSYBOX_DEFAULT_NC_110_COMPAT  # off specially for Rob
+	depends on BUSYBOX_CONFIG_NC
+	help
+	  This option makes nc closely follow original nc-1.10.
+	  The code is about 2.5k bigger. It enables
+	  -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+	  busybox-specific extensions: -f FILE and -ll.
+config BUSYBOX_CONFIG_PING
+	bool "ping"
+	default BUSYBOX_DEFAULT_PING
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+	  elicit an ICMP ECHO_RESPONSE from a host or gateway.
+
+config BUSYBOX_CONFIG_PING6
+	bool "ping6"
+	default BUSYBOX_DEFAULT_PING6
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
+	help
+	  This will give you a ping that can talk IPv6.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+	bool "Enable fancy ping output"
+	default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
+	depends on BUSYBOX_CONFIG_PING
+	help
+	  Make the output from the ping applet include statistics, and at the
+	  same time provide full support for ICMP packets.
+config BUSYBOX_CONFIG_WHOIS
+	bool "whois"
+	default BUSYBOX_DEFAULT_WHOIS
+	help
+	  whois is a client for the whois directory service
+
+config BUSYBOX_CONFIG_FEATURE_IPV6
+	bool "Enable IPv6 support"
+	default BUSYBOX_DEFAULT_FEATURE_IPV6
+	help
+	  Enable IPv6 support in busybox.
+	  This adds IPv6 support in the networking applets.
+
+config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
+	bool "Enable Unix domain socket support (usually not needed)"
+	default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
+	help
+	  Enable Unix domain socket support in all busybox networking
+	  applets.  Address of the form local:/path/to/unix/socket
+	  will be recognized.
+
+	  This extension is almost never used in real world usage.
+	  You most likely want to say N.
+
+config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
+	bool "Prefer IPv4 addresses from DNS queries"
+	default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  Use IPv4 address of network host if it has one.
+
+	  If this option is off, the first returned address will be used.
+	  This may cause problems when your DNS server is IPv6-capable and
+	  is returning IPv6 host addresses too. If IPv6 address
+	  precedes IPv4 one in DNS reply, busybox network applets
+	  (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+	  or network applets will fail to connect to the host
+	  using IPv6 address.
+
+config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
+	bool "Verbose resolution errors"
+	default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
+	help
+	  Enable if you are not satisfied with simplistic
+	  "can't resolve 'hostname.com'" and want to know more.
+	  This may increase size of your executable a bit.
+
+config BUSYBOX_CONFIG_ARP
+	bool "arp"
+	default BUSYBOX_DEFAULT_ARP
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Manipulate the system ARP cache.
+
+config BUSYBOX_CONFIG_ARPING
+	bool "arping"
+	default BUSYBOX_DEFAULT_ARPING
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Ping hosts by ARP packets.
+
+config BUSYBOX_CONFIG_BRCTL
+	bool "brctl"
+	default BUSYBOX_DEFAULT_BRCTL
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Manage ethernet bridges.
+	  Supports addbr/delbr and addif/delif.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+	bool "Fancy options"
+	default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
+	depends on BUSYBOX_CONFIG_BRCTL
+	help
+	  Add support for extended option like:
+	    setageing, setfd, sethello, setmaxage,
+	    setpathcost, setportprio, setbridgeprio,
+	    stp
+	  This adds about 600 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
+	bool "Support show"
+	default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
+	depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+	help
+	  Add support for option which prints the current config:
+	    show
+
+config BUSYBOX_CONFIG_DNSD
+	bool "dnsd"
+	default BUSYBOX_DEFAULT_DNSD
+	help
+	  Small and static DNS server daemon.
+
+config BUSYBOX_CONFIG_ETHER_WAKE
+	bool "ether-wake"
+	default BUSYBOX_DEFAULT_ETHER_WAKE
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Send a magic packet to wake up sleeping machines.
+
+config BUSYBOX_CONFIG_FAKEIDENTD
+	bool "fakeidentd"
+	default BUSYBOX_DEFAULT_FAKEIDENTD
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  fakeidentd listens on the ident port and returns a predefined
+	  fake value on any query.
+
+config BUSYBOX_CONFIG_FTPD
+	bool "ftpd"
+	default BUSYBOX_DEFAULT_FTPD
+	help
+	  simple FTP daemon. You have to run it via inetd.
+
+config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
+	bool "Enable upload commands"
+	default BUSYBOX_DEFAULT_FEATURE_FTP_WRITE
+	depends on BUSYBOX_CONFIG_FTPD
+	help
+	  Enable all kinds of FTP upload commands (-w option)
+
+config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
+	bool "Enable workaround for RFC-violating clients"
+	default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
+	depends on BUSYBOX_CONFIG_FTPD
+	help
+	  Some ftp clients (among them KDE's Konqueror) issue illegal
+	  "LIST -l" requests. This option works around such problems.
+	  It might prevent you from listing files starting with "-" and
+	  it increases the code size by ~40 bytes.
+	  Most other ftp servers seem to behave similar to this.
+
+config BUSYBOX_CONFIG_FTPGET
+	bool "ftpget"
+	default BUSYBOX_DEFAULT_FTPGET
+	help
+	  Retrieve a remote file via FTP.
+
+config BUSYBOX_CONFIG_FTPPUT
+	bool "ftpput"
+	default BUSYBOX_DEFAULT_FTPPUT
+	help
+	  Store a remote file via FTP.
+
+config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
+	bool "Enable long options in ftpget/ftpput"
+	default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS
+	depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
+	help
+	  Support long options for the ftpget/ftpput applet.
+
+config BUSYBOX_CONFIG_HOSTNAME
+	bool "hostname"
+	default BUSYBOX_DEFAULT_HOSTNAME
+	help
+	  Show or set the system's host name.
+
+config BUSYBOX_CONFIG_HTTPD
+	bool "httpd"
+	default BUSYBOX_DEFAULT_HTTPD
+	help
+	  Serve web pages via an HTTP server.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
+	bool "Support 'Ranges:' header"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  Makes httpd emit "Accept-Ranges: bytes" header and understand
+	  "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+	  downloads, seeking in multimedia players etc.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
+	bool "Use sendfile system call"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_USE_SENDFILE
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  When enabled, httpd will use the kernel sendfile() function
+	  instead of read/write loop.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
+	bool "Enable -u <user> option"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows the server to run as a specific user
+	  rather than defaulting to the user that starts the server.
+	  Use of this option requires special privileges to change to a
+	  different user.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+	bool "Enable Basic http Authentication"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  Utilizes password settings from /etc/httpd.conf for basic
+	  authentication on a per url basis.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
+	bool "Support MD5 crypted passwords for http Authentication"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+	help
+	  Enables basic per URL authentication from /etc/httpd.conf
+	  using md5 passwords.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	bool "Support Common Gateway Interface (CGI)"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows scripts and executables to be invoked
+	  when specific URLs are requested.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+	bool "Support for running scripts through an interpreter"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	help
+	  This option enables support for running scripts through an
+	  interpreter. Turn this on if you want PHP scripts to work
+	  properly. You need to supply an additional line in your httpd
+	  config file:
+	  *.php:/path/to/your/php
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+	bool "Set REMOTE_PORT environment variable for CGI"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	help
+	  Use of this option can assist scripts in generating
+	  references that contain a unique port number.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
+	bool "Enable -e option (useful for CGIs written as shell scripts)"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows html encoding of arbitrary strings for display
+	  by the browser. Output goes to stdout.
+	  For example, httpd -e "<Hello World>" produces
+	  "&#60Hello&#32World&#62".
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
+	bool "Support for custom error pages"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows you to define custom error pages in
+	  the configuration file instead of the default HTTP status
+	  error pages. For instance, if you add the line:
+	        E404:/path/e404.html
+	  in the config file, the server will respond the specified
+	  '/path/e404.html' file instead of the terse '404 NOT FOUND'
+	  message.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
+	bool "Support for reverse proxy"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows you to define URLs that will be forwarded
+	  to another HTTP server. To setup add the following line to the
+	  configuration file
+	        P:/url/:http://hostname[:port]/new/path/
+	  Then a request to /url/myfile will be forwarded to
+	  http://hostname[:port]/new/path/myfile.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
+	bool "Support for GZIP content encoding"
+	default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  Makes httpd send files using GZIP content encoding if the
+	  client supports it and a pre-compressed <file>.gz exists.
+
+config BUSYBOX_CONFIG_IFCONFIG
+	bool "ifconfig"
+	default BUSYBOX_DEFAULT_IFCONFIG
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Ifconfig is used to configure the kernel-resident network interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
+	bool "Enable status reporting output (+7k)"
+	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  If ifconfig is called with no arguments it will display the status
+	  of the currently active interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
+	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
+	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Allow "keepalive" and "outfill" support for SLIP. If you're not
+	  planning on using serial lines, leave this unchecked.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
+	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Allow the start address for shared memory, start address for I/O,
+	  and/or the interrupt line used by the specified device.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
+	bool "Enable option \"hw\" (ether only)"
+	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Set the hardware address of this interface, if the device driver
+	  supports  this  operation. Currently, we only support the 'ether'
+	  class.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
+	bool "Set the broadcast automatically"
+	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Setting this will make ifconfig attempt to find the broadcast
+	  automatically if the value '+' is used.
+
+config BUSYBOX_CONFIG_IFENSLAVE
+	bool "ifenslave"
+	default BUSYBOX_DEFAULT_IFENSLAVE
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Userspace application to bind several interfaces
+	  to a logical interface (use with kernel bonding driver).
+
+config BUSYBOX_CONFIG_IFPLUGD
+	bool "ifplugd"
+	default BUSYBOX_DEFAULT_IFPLUGD
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Network interface plug detection daemon.
+
+config BUSYBOX_CONFIG_IFUPDOWN
+	bool "ifupdown"
+	default BUSYBOX_DEFAULT_IFUPDOWN
+	help
+	  Activate or deactivate the specified interfaces. This applet makes
+	  use of either "ifconfig" and "route" or the "ip" command to actually
+	  configure network interfaces. Therefore, you will probably also want
+	  to enable either IFCONFIG and ROUTE, or enable
+	  FEATURE_IFUPDOWN_IP and the various IP options. Of
+	  course you could use non-busybox versions of these programs, so
+	  against my better judgement (since this will surely result in plenty
+	  of support questions on the mailing list), I do not force you to
+	  enable these additional options. It is up to you to supply either
+	  "ifconfig", "route" and "run-parts" or the "ip" command, either
+	  via busybox or via standalone utilities.
+
+config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
+	string "Absolute path to ifstate file"
+	default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  ifupdown keeps state information in a file called ifstate.
+	  Typically it is located in /var/run/ifstate, however
+	  some distributions tend to put it in other places
+	  (debian, for example, uses /etc/network/run/ifstate).
+	  This config option defines location of ifstate.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+	bool "Use ip applet"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+	  than the default of using the older 'ifconfig' and 'route' utilities.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+	bool "Use busybox ip applet"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP_BUILTIN
+	depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	select BUSYBOX_CONFIG_IP
+	select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+	select BUSYBOX_CONFIG_FEATURE_IP_LINK
+	select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+	help
+	  Use the busybox iproute "ip" applet to implement "ifupdown".
+
+	  If left disabled, you must install the full-blown iproute2
+	  utility or the  "ifup" and "ifdown" applets will not work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+	bool "Use busybox ifconfig and route applets"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+	depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+	select BUSYBOX_CONFIG_IFCONFIG
+	select BUSYBOX_CONFIG_ROUTE
+	help
+	  Use the busybox iproute "ifconfig" and "route" applets to
+	  implement the "ifup" and "ifdown" utilities.
+
+	  If left disabled, you must install the full-blown ifconfig
+	  and route utilities, or the  "ifup" and "ifdown" applets will not
+	  work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
+	bool "Support for IPv4"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  If you want ifup/ifdown to talk IPv4, leave this on.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
+	bool "Support for IPv6"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
+	depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  If you need support for IPv6, turn this option on.
+
+### UNUSED
+###config FEATURE_IFUPDOWN_IPX
+###	bool "Support for IPX"
+###	default y
+###	depends on IFUPDOWN
+###	help
+###	  If this option is selected you can use busybox to work with IPX
+###	  networks.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
+	bool "Enable mapping support"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  This enables support for the "mapping" stanza, unless you have
+	  a weird network setup you don't need it.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+	bool "Support for external dhcp clients"
+	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  This enables support for the external dhcp clients. Clients are
+	  tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+	  Otherwise, if udhcpc applet is enabled, it is used.
+	  Otherwise, ifup/ifdown will have no support for DHCP.
+
+config BUSYBOX_CONFIG_INETD
+	bool "inetd"
+	default BUSYBOX_DEFAULT_INETD
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  Internet superserver daemon
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+	bool "Support echo service"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Echo received data internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+	bool "Support discard service"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Internet /dev/null internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+	bool "Support time service"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Return 32 bit time since 1900 internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+	bool "Support daytime service"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Return human-readable time internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+	bool "Support chargen service"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Familiar character generator internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_RPC
+	bool "Support RPC services"
+	default BUSYBOX_DEFAULT_FEATURE_INETD_RPC
+	depends on BUSYBOX_CONFIG_INETD
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	help
+	  Support Sun-RPC based services
+
+config BUSYBOX_CONFIG_IP
+	bool "ip"
+	default BUSYBOX_DEFAULT_IP
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  The "ip" applet is a TCP/IP interface configuration and routing
+	  utility. You generally don't need "ip" to use busybox with
+	  TCP/IP.
+
+config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+	bool "ip address"
+	default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Address manipulation support for the "ip" applet.
+
+config BUSYBOX_CONFIG_FEATURE_IP_LINK
+	bool "ip link"
+	default BUSYBOX_DEFAULT_FEATURE_IP_LINK
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Configure network devices with "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+	bool "ip route"
+	default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Add support for routing table management to "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+	bool "ip tunnel"
+	default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Add support for tunneling commands to "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_RULE
+	bool "ip rule"
+	default BUSYBOX_DEFAULT_FEATURE_IP_RULE
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Add support for rule commands to "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
+	bool "Support short forms of ip commands"
+	default BUSYBOX_DEFAULT_FEATURE_IP_SHORT_FORMS
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Also support short-form of ip <OBJECT> commands:
+	  ip addr   -> ipaddr
+	  ip link   -> iplink
+	  ip route  -> iproute
+	  ip tunnel -> iptunnel
+	  ip rule   -> iprule
+
+	  Say N unless you desparately need the short form of the ip
+	  object commands.
+
+config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
+	bool "Support displaying rarely used link types"
+	default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  If you are not going to use links of type "frad", "econet",
+	  "bif" etc, you probably don't need to enable this.
+	  Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+	  link types are supported without this option selected.
+
+config BUSYBOX_CONFIG_IPADDR
+	bool
+	default BUSYBOX_DEFAULT_IPADDR
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+
+config BUSYBOX_CONFIG_IPLINK
+	bool
+	default BUSYBOX_DEFAULT_IPLINK
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
+
+config BUSYBOX_CONFIG_IPROUTE
+	bool
+	default BUSYBOX_DEFAULT_IPROUTE
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+
+config BUSYBOX_CONFIG_IPTUNNEL
+	bool
+	default BUSYBOX_DEFAULT_IPTUNNEL
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+
+config BUSYBOX_CONFIG_IPRULE
+	bool
+	default BUSYBOX_DEFAULT_IPRULE
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
+
+config BUSYBOX_CONFIG_IPCALC
+	bool "ipcalc"
+	default BUSYBOX_DEFAULT_IPCALC
+	help
+	  ipcalc takes an IP address and netmask and calculates the
+	  resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+	bool "Fancy IPCALC, more options, adds 1 kbyte"
+	default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
+	depends on BUSYBOX_CONFIG_IPCALC
+	help
+	  Adds the options hostname, prefix and silent to the output of
+	  "ipcalc".
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
+	bool "Enable long options"
+	default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS
+	depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
+	help
+	  Support long options for the ipcalc applet.
+
+config BUSYBOX_CONFIG_NETMSG
+	bool "netmsg"
+	default BUSYBOX_DEFAULT_NETMSG
+	help
+	  simple program for sending udp broadcast messages
+
+config BUSYBOX_CONFIG_NETSTAT
+	bool "netstat"
+	default BUSYBOX_DEFAULT_NETSTAT
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  netstat prints information about the Linux networking subsystem.
+
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
+	bool "Enable wide netstat output"
+	default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
+	depends on BUSYBOX_CONFIG_NETSTAT
+	help
+	  Add support for wide columns. Useful when displaying IPv6 addresses
+	  (-W option).
+
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
+	bool "Enable PID/Program name output"
+	default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
+	depends on BUSYBOX_CONFIG_NETSTAT
+	help
+	  Add support for -p flag to print out PID and program name.
+	  +700 bytes of code.
+
+config BUSYBOX_CONFIG_NSLOOKUP
+	bool "nslookup"
+	default BUSYBOX_DEFAULT_NSLOOKUP
+	help
+	  nslookup is a tool to query Internet name servers.
+
+config BUSYBOX_CONFIG_NTPD
+	bool "ntpd"
+	default BUSYBOX_DEFAULT_NTPD
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  The NTP client/server daemon.
+
+config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
+	bool "Make ntpd usable as a NTP server"
+	default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
+	depends on BUSYBOX_CONFIG_NTPD
+	help
+	  Make ntpd usable as a NTP server. If you disable this option
+	  ntpd will be usable only as a NTP client.
+
+config BUSYBOX_CONFIG_PSCAN
+	bool "pscan"
+	default BUSYBOX_DEFAULT_PSCAN
+	help
+	  Simple network port scanner.
+
+config BUSYBOX_CONFIG_ROUTE
+	bool "route"
+	default BUSYBOX_DEFAULT_ROUTE
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Route displays or manipulates the kernel's IP routing tables.
+
+config BUSYBOX_CONFIG_SLATTACH
+	bool "slattach"
+	default BUSYBOX_DEFAULT_SLATTACH
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  slattach is a small utility to attach network interfaces to serial
+	  lines.
+
+#config TC
+#	bool "tc"
+#	default y
+#	help
+#	  show / manipulate traffic control settings
+#
+#config FEATURE_TC_INGRESS
+#	def_bool n
+#	depends on TC
+
+config BUSYBOX_CONFIG_TCPSVD
+	bool "tcpsvd"
+	default BUSYBOX_DEFAULT_TCPSVD
+	help
+	  tcpsvd listens on a TCP port and runs a program for each new
+	  connection.
+
+config BUSYBOX_CONFIG_TELNET
+	bool "telnet"
+	default BUSYBOX_DEFAULT_TELNET
+	help
+	  Telnet is an interface to the TELNET protocol, but is also commonly
+	  used to test other simple protocols.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
+	bool "Pass TERM type to remote host"
+	default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
+	depends on BUSYBOX_CONFIG_TELNET
+	help
+	  Setting this option will forward the TERM environment variable to the
+	  remote host you are connecting to. This is useful to make sure that
+	  things like ANSI colors and other control sequences behave.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
+	bool "Pass USER type to remote host"
+	default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
+	depends on BUSYBOX_CONFIG_TELNET
+	help
+	  Setting this option will forward the USER environment variable to the
+	  remote host you are connecting to. This is useful when you need to
+	  log into a machine without telling the username (autologin). This
+	  option enables `-a' and `-l USER' arguments.
+
+config BUSYBOX_CONFIG_TELNETD
+	bool "telnetd"
+	default BUSYBOX_DEFAULT_TELNETD
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  A daemon for the TELNET protocol, allowing you to log onto the host
+	  running the daemon. Please keep in mind that the TELNET protocol
+	  sends passwords in plain text. If you can't afford the space for an
+	  SSH daemon and you trust your network, you may say 'y' here. As a
+	  more secure alternative, you should seriously consider installing the
+	  very small Dropbear SSH daemon instead:
+		http://matt.ucc.asn.au/dropbear/dropbear.html
+
+	  Note that for busybox telnetd to work you need several things:
+	  First of all, your kernel needs:
+		  UNIX98_PTYS=y
+		  DEVPTS_FS=y
+
+	  Next, you need a /dev/pts directory on your root filesystem:
+
+		  $ ls -ld /dev/pts
+		  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
+
+	  Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+		  $ ls -la /dev/ptmx
+		  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+	  Any /dev/ttyp[0-9]* files you may have can be removed.
+	  Next, you need to mount the devpts filesystem on /dev/pts using:
+
+		  mount -t devpts devpts /dev/pts
+
+	  You need to be sure that busybox has LOGIN and
+	  FEATURE_SUID enabled. And finally, you should make
+	  certain that Busybox has been installed setuid root:
+
+		chown root.root /bin/busybox
+		chmod 4755 /bin/busybox
+
+	  with all that done, telnetd _should_ work....
+
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+	bool "Support standalone telnetd (not inetd only)"
+	default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
+	depends on BUSYBOX_CONFIG_TELNETD
+	help
+	  Selecting this will make telnetd able to run standalone.
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
+	bool "Support -w SEC option (inetd wait mode)"
+	default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
+	depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+	help
+	  This option allows you to run telnetd in "inet wait" mode.
+	  Example inetd.conf line (note "wait", not usual "nowait"):
+
+	  telnet stream tcp wait root /bin/telnetd telnetd -w10
+
+	  In this example, inetd passes _listening_ socket_ as fd 0
+	  to telnetd when connection appears.
+	  telnetd will wait for connections until all existing
+	  connections are closed, and no new connections
+	  appear during 10 seconds. Then it exits, and inetd continues
+	  to listen for new connections.
+
+	  This option is rarely used. "tcp nowait" is much more usual
+	  way of running tcp services, including telnetd.
+	  You most probably want to say N here.
+
+config BUSYBOX_CONFIG_TFTP
+	bool "tftp"
+	default BUSYBOX_DEFAULT_TFTP
+	help
+	  This enables the Trivial File Transfer Protocol client program. TFTP
+	  is usually used for simple, small transfers such as a root image
+	  for a network-enabled bootloader.
+
+config BUSYBOX_CONFIG_TFTPD
+	bool "tftpd"
+	default BUSYBOX_DEFAULT_TFTPD
+	help
+	  This enables the Trivial File Transfer Protocol server program.
+	  It expects that stdin is a datagram socket and a packet
+	  is already pending on it. It will exit after one transfer.
+	  In other words: it should be run from inetd in nowait mode,
+	  or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+
+comment "Common options for tftp/tftpd"
+	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_GET
+	bool "Enable 'tftp get' and/or tftpd upload code"
+	default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
+	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+	help
+	  Add support for the GET command within the TFTP client. This allows
+	  a client to retrieve a file from a TFTP server.
+	  Also enable upload support in tftpd, if tftpd is selected.
+
+	  Note: this option does _not_ make tftpd capable of download
+	  (the usual operation people need from it)!
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
+	bool "Enable 'tftp put' and/or tftpd download code"
+	default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
+	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+	help
+	  Add support for the PUT command within the TFTP client. This allows
+	  a client to transfer a file to a TFTP server.
+	  Also enable download support in tftpd, if tftpd is selected.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
+	bool "Enable 'blksize' and 'tsize' protocol options"
+	default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
+	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+	help
+	  Allow tftp to specify block size, and tftpd to understand
+	  "blksize" and "tsize" options.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
+	bool "Enable tftp progress meter"
+	default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
+	depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
+	help
+	  Show progress bar.
+
+config BUSYBOX_CONFIG_TFTP_DEBUG
+	bool "Enable debug"
+	default BUSYBOX_DEFAULT_TFTP_DEBUG
+	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+	help
+	  Make tftp[d] print debugging messages on stderr.
+	  This is useful if you are diagnosing a bug in tftp[d].
+
+config BUSYBOX_CONFIG_TRACEROUTE
+	bool "traceroute"
+	default BUSYBOX_DEFAULT_TRACEROUTE
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Utility to trace the route of IP packets.
+
+config BUSYBOX_CONFIG_TRACEROUTE6
+	bool "traceroute6"
+	default BUSYBOX_DEFAULT_TRACEROUTE6
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Utility to trace the route of IPv6 packets.
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
+	bool "Enable verbose output"
+	default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add some verbosity to traceroute. This includes among other things
+	  hostnames and ICMP response types.
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
+	bool "Enable loose source route"
+	default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_SOURCE_ROUTE
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add option to specify a loose source route gateway
+	  (8 maximum).
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
+	bool "Use ICMP instead of UDP"
+	default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add option -I to use ICMP ECHO instead of UDP datagrams.
+
+config BUSYBOX_CONFIG_TUNCTL
+	bool "tunctl"
+	default BUSYBOX_DEFAULT_TUNCTL
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  tunctl creates or deletes tun devices.
+
+config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
+	bool "Support owner:group assignment"
+	default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
+	depends on BUSYBOX_CONFIG_TUNCTL
+	help
+	  Allow to specify owner and group of newly created interface.
+	  340 bytes of pure bloat. Say no here.
+
+source package/utils/busybox/config/networking/udhcp/Config.in
+
+config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
+	string "ifup udhcpc command line options"
+	default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
+	depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
+	help
+	  Command line options to pass to udhcpc from ifup.
+	  Intended to alter options not available in /etc/network/interfaces.
+	  (IE: --syslog --background etc...)
+
+config BUSYBOX_CONFIG_UDPSVD
+	bool "udpsvd"
+	default BUSYBOX_DEFAULT_UDPSVD
+	help
+	  udpsvd listens on an UDP port and runs a program for each new
+	  connection.
+
+config BUSYBOX_CONFIG_VCONFIG
+	bool "vconfig"
+	default BUSYBOX_DEFAULT_VCONFIG
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Creates, removes, and configures VLAN interfaces
+
+config BUSYBOX_CONFIG_WGET
+	bool "wget"
+	default BUSYBOX_DEFAULT_WGET
+	help
+	  wget is a utility for non-interactive download of files from HTTP,
+	  HTTPS, and FTP servers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
+	bool "Enable a nifty process meter (+2k)"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
+	bool "Enable HTTP authentication"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Support authenticated HTTP transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+	bool "Enable long options"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
+	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
+	help
+	  Support long options for the wget applet.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
+	bool "Enable read timeout option -T SEC"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Supports network read timeout for wget, so that wget will give
+	  up and timeout when reading network data, through the -T command
+	  line option.  Currently only network data read timeout is
+	  supported (i.e., timeout is not applied to the DNS nor TCP
+	  connection initialization).  When FEATURE_WGET_LONG_OPTIONS is
+	  also enabled, the --timeout option will work in addition to -T.
+
+config BUSYBOX_CONFIG_ZCIP
+	bool "zcip"
+	default BUSYBOX_DEFAULT_ZCIP
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+	  It's a daemon that allocates and defends a dynamically assigned
+	  address on the 169.254/16 network, requiring no system administrator.
+
+	  See http://www.zeroconf.org for further details, and "zcip.script"
+	  in the busybox examples.
+
+endmenu
diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in
new file mode 100644
index 0000000000..64731f15fd
--- /dev/null
+++ b/package/utils/busybox/config/networking/udhcp/Config.in
@@ -0,0 +1,155 @@
+# DO NOT EDIT. This file is generated from Config.src
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+
+
+config BUSYBOX_CONFIG_UDHCPD
+	bool "udhcp server (udhcpd)"
+	default BUSYBOX_DEFAULT_UDHCPD
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  udhcpd is a DHCP server geared primarily toward embedded systems,
+	  while striving to be fully functional and RFC compliant.
+
+config BUSYBOX_CONFIG_DHCPRELAY
+	bool "dhcprelay"
+	default BUSYBOX_DEFAULT_DHCPRELAY
+	depends on BUSYBOX_CONFIG_UDHCPD
+	help
+	  dhcprelay listens for dhcp requests on one or more interfaces
+	  and forwards these requests to a different interface or dhcp
+	  server.
+
+config BUSYBOX_CONFIG_DUMPLEASES
+	bool "Lease display utility (dumpleases)"
+	default BUSYBOX_DEFAULT_DUMPLEASES
+	depends on BUSYBOX_CONFIG_UDHCPD
+	help
+	  dumpleases displays the leases written out by the udhcpd server.
+	  Lease times are stored in the file by time remaining in lease, or
+	  by the absolute time that it expires in seconds from epoch.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
+	bool "Rewrite the lease file at every new acknowledge"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY
+	depends on BUSYBOX_CONFIG_UDHCPD
+	help
+	  If selected, udhcpd will write a new file with leases every
+	  time a new lease has been accepted, thus eliminating the need
+	  to send SIGUSR1 for the initial writing or updating. Any timed
+	  rewriting remains undisturbed.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
+	bool "Select IP address based on client MAC"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC
+	depends on BUSYBOX_CONFIG_UDHCPD
+	help
+	  If selected, udhcpd will base its selection of IP address to offer
+	  on the client's hardware address. Otherwise udhcpd uses the next
+	  consecutive free address.
+
+	  This reduces the frequency of IP address changes for clients
+	  which let their lease expire, and makes consecutive DHCPOFFERS
+	  for the same client to (almost always) contain the same
+	  IP address.
+
+config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
+	string "Absolute path to lease file"
+	default BUSYBOX_DEFAULT_DHCPD_LEASES_FILE
+	depends on BUSYBOX_CONFIG_UDHCPD
+	help
+	  udhcpd stores addresses in a lease file. This is the absolute path
+	  of the file. Normally it is safe to leave it untouched.
+
+config BUSYBOX_CONFIG_UDHCPC
+	bool "udhcp client (udhcpc)"
+	default BUSYBOX_DEFAULT_UDHCPC
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  udhcpc is a DHCP client geared primarily toward embedded systems,
+	  while striving to be fully functional and RFC compliant.
+
+	  The udhcp client negotiates a lease with the DHCP server and
+	  runs a script when a lease is obtained or lost.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING
+	bool "Verify that the offered address is free, using ARP ping"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCPC_ARPING
+	depends on BUSYBOX_CONFIG_UDHCPC
+	help
+	  If selected, udhcpc will send ARP probes and make sure
+	  the offered address is really not in use by anyone. The client
+	  will DHCPDECLINE the offer if the address is in use,
+	  and restart the discover process.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
+	bool "Enable '-P port' option for udhcpd and udhcpc"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT
+	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+	help
+	  At the cost of ~300 bytes, enables -P port option.
+	  This feature is typically not needed.
+
+config BUSYBOX_CONFIG_UDHCP_DEBUG
+	int "Maximum verbosity level for udhcp applets (0..9)"
+	default BUSYBOX_DEFAULT_UDHCP_DEBUG
+	range 0 9
+	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
+	help
+	  Verbosity can be increased with multiple -v options.
+	  This option controls how high it can be cranked up.
+
+	  Bigger values result in bigger code. Levels above 1
+	  are very verbose and useful for debugging only.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
+	bool "Support for RFC3397 domain search (experimental)"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397
+	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+	help
+	  If selected, both client and server will support passing of domain
+	  search lists via option 119, specified in RFC 3397,
+	  and SIP servers option 120, specified in RFC 3361.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
+	bool "Support for 802.1Q VLAN parameters"
+	default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q
+	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+	help
+	  If selected, both client and server will support passing of VLAN
+	  ID and priority via options 132 and 133 as per 802.1Q.
+
+config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
+	string "Absolute path to config script"
+	default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT
+	depends on BUSYBOX_CONFIG_UDHCPC
+	help
+	  This script is called after udhcpc receives an answer. See
+	  examples/udhcp for a working example. Normally it is safe
+	  to leave this untouched.
+
+config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
+	int "DHCP options slack buffer size"
+	default BUSYBOX_DEFAULT_UDHCPC_SLACK_FOR_BUGGY_SERVERS
+	range 0 924
+	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+	help
+	  Some buggy DHCP servers send DHCP offer packets with option
+	  field larger than we expect (which might also be considered a
+	  buffer overflow attempt). These packets are normally discarded.
+	  If circumstances beyond your control force you to support such
+	  servers, this may help. The upper limit (924) makes dhcpc accept
+	  even 1500 byte packets (maximum-sized ethernet packets).
+
+	  This option does not make dhcp[cd] emit non-standard
+	  sized packets.
+
+	  Known buggy DHCP servers:
+	  3Com OfficeConnect Remote 812 ADSL Router:
+	    seems to confuse maximum allowed UDP packet size with
+	    maximum size of entire IP packet, and sends packets which are
+	    28 bytes too large.
+	  Seednet (ISP) VDSL: sends packets 2 bytes too large.