busybox: remove busybox menuconfig from top level menuconfig

This will help with avoiding bogus bug reports caused by stale configs
and bad cases of user tinkering :)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39106

2 files changed, 0 insertions, 1243 deletions

diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
deleted file mode 100644
index 442eb03428..0000000000
--- a/package/utils/busybox/config/networking/Config.in
+++ /dev/null
@@ -1,1088 +0,0 @@
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Networking Utilities"
-
-config BUSYBOX_CONFIG_NAMEIF
-	bool "nameif"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  nameif is used to rename network interface by its MAC address.
-	  Renamed interfaces MUST be in the down state.
-	  It is possible to use a file (default: /etc/mactab)
-	  with list of new interface names and MACs.
-	  Maximum interface name length: IFNAMSIZ = 16
-	  File fields are separated by space or tab.
-	  File format:
-	  # Comment
-	  new_interface_name    XX:XX:XX:XX:XX:XX
-
-config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
-	bool "Extended nameif"
-	default n
-	depends on BUSYBOX_CONFIG_NAMEIF
-	help
-	  This extends the nameif syntax to support the bus_info, driver,
-	  phyaddr selectors. The syntax is compatible to the normal nameif.
-	  File format:
-	    new_interface_name  driver=asix bus=usb-0000:00:08.2-3
-	    new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
-	    new_interface_name  phy_address=2 00:80:C8:38:91:B5
-	    new_interface_name  mac=00:80:C8:38:91:B5
-	    new_interface_name  00:80:C8:38:91:B5
-config BUSYBOX_CONFIG_NBDCLIENT
-	bool "nbd-client"
-	default n
-	help
-	  Network block device client
-config BUSYBOX_CONFIG_NC
-	bool "nc"
-	default y
-	help
-	  A simple Unix utility which reads and writes data across network
-	  connections.
-
-config BUSYBOX_CONFIG_NC_SERVER
-	bool "Netcat server options (-l)"
-	default n
-	depends on BUSYBOX_CONFIG_NC
-	help
-	  Allow netcat to act as a server.
-
-config BUSYBOX_CONFIG_NC_EXTRA
-	bool "Netcat extensions (-eiw and filename)"
-	default n
-	depends on BUSYBOX_CONFIG_NC
-	help
-	  Add -e (support for executing the rest of the command line after
-	  making or receiving a successful connection), -i (delay interval for
-	  lines sent), -w (timeout for initial connection).
-
-config BUSYBOX_CONFIG_NC_110_COMPAT
-	bool "Netcat 1.10 compatibility (+2.5k)"
-	default n  # off specially for Rob
-	depends on BUSYBOX_CONFIG_NC
-	help
-	  This option makes nc closely follow original nc-1.10.
-	  The code is about 2.5k bigger. It enables
-	  -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
-	  busybox-specific extensions: -f FILE and -ll.
-config BUSYBOX_CONFIG_PING
-	bool "ping"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
-	  elicit an ICMP ECHO_RESPONSE from a host or gateway.
-
-config BUSYBOX_CONFIG_PING6
-	bool "ping6"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
-	help
-	  This will give you a ping that can talk IPv6.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
-	bool "Enable fancy ping output"
-	default y
-	depends on BUSYBOX_CONFIG_PING
-	help
-	  Make the output from the ping applet include statistics, and at the
-	  same time provide full support for ICMP packets.
-config BUSYBOX_CONFIG_WHOIS
-	bool "whois"
-	default n
-	help
-	  whois is a client for the whois directory service
-
-config BUSYBOX_CONFIG_FEATURE_IPV6
-	bool "Enable IPv6 support"
-	default IPV6
-	help
-	  Enable IPv6 support in busybox.
-	  This adds IPv6 support in the networking applets.
-
-config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
-	bool "Enable Unix domain socket support (usually not needed)"
-	default n
-	help
-	  Enable Unix domain socket support in all busybox networking
-	  applets.  Address of the form local:/path/to/unix/socket
-	  will be recognized.
-
-	  This extension is almost never used in real world usage.
-	  You most likely want to say N.
-
-config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
-	bool "Prefer IPv4 addresses from DNS queries"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_IPV6
-	help
-	  Use IPv4 address of network host if it has one.
-
-	  If this option is off, the first returned address will be used.
-	  This may cause problems when your DNS server is IPv6-capable and
-	  is returning IPv6 host addresses too. If IPv6 address
-	  precedes IPv4 one in DNS reply, busybox network applets
-	  (e.g. wget) will use IPv6 address. On an IPv6-incapable host
-	  or network applets will fail to connect to the host
-	  using IPv6 address.
-
-config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
-	bool "Verbose resolution errors"
-	default y
-	help
-	  Enable if you are not satisfied with simplistic
-	  "can't resolve 'hostname.com'" and want to know more.
-	  This may increase size of your executable a bit.
-
-config BUSYBOX_CONFIG_ARP
-	bool "arp"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Manipulate the system ARP cache.
-
-config BUSYBOX_CONFIG_ARPING
-	bool "arping"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Ping hosts by ARP packets.
-
-config BUSYBOX_CONFIG_BRCTL
-	bool "brctl"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Manage ethernet bridges.
-	  Supports addbr/delbr and addif/delif.
-
-config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
-	bool "Fancy options"
-	default y
-	depends on BUSYBOX_CONFIG_BRCTL
-	help
-	  Add support for extended option like:
-	    setageing, setfd, sethello, setmaxage,
-	    setpathcost, setportprio, setbridgeprio,
-	    stp
-	  This adds about 600 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
-	bool "Support show"
-	default y
-	depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
-	help
-	  Add support for option which prints the current config:
-	    show
-
-config BUSYBOX_CONFIG_DNSD
-	bool "dnsd"
-	default n
-	help
-	  Small and static DNS server daemon.
-
-config BUSYBOX_CONFIG_ETHER_WAKE
-	bool "ether-wake"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Send a magic packet to wake up sleeping machines.
-
-config BUSYBOX_CONFIG_FAKEIDENTD
-	bool "fakeidentd"
-	default n
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  fakeidentd listens on the ident port and returns a predefined
-	  fake value on any query.
-
-config BUSYBOX_CONFIG_FTPD
-	bool "ftpd"
-	default n
-	help
-	  simple FTP daemon. You have to run it via inetd.
-
-config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
-	bool "Enable upload commands"
-	default n
-	depends on BUSYBOX_CONFIG_FTPD
-	help
-	  Enable all kinds of FTP upload commands (-w option)
-
-config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
-	bool "Enable workaround for RFC-violating clients"
-	default n
-	depends on BUSYBOX_CONFIG_FTPD
-	help
-	  Some ftp clients (among them KDE's Konqueror) issue illegal
-	  "LIST -l" requests. This option works around such problems.
-	  It might prevent you from listing files starting with "-" and
-	  it increases the code size by ~40 bytes.
-	  Most other ftp servers seem to behave similar to this.
-
-config BUSYBOX_CONFIG_FTPGET
-	bool "ftpget"
-	default n
-	help
-	  Retrieve a remote file via FTP.
-
-config BUSYBOX_CONFIG_FTPPUT
-	bool "ftpput"
-	default n
-	help
-	  Store a remote file via FTP.
-
-config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
-	bool "Enable long options in ftpget/ftpput"
-	default n
-	depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
-	help
-	  Support long options for the ftpget/ftpput applet.
-
-config BUSYBOX_CONFIG_HOSTNAME
-	bool "hostname"
-	default n
-	help
-	  Show or set the system's host name.
-
-config BUSYBOX_CONFIG_HTTPD
-	bool "httpd"
-	default n
-	help
-	  Serve web pages via an HTTP server.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
-	bool "Support 'Ranges:' header"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  Makes httpd emit "Accept-Ranges: bytes" header and understand
-	  "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
-	  downloads, seeking in multimedia players etc.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
-	bool "Use sendfile system call"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  When enabled, httpd will use the kernel sendfile() function
-	  instead of read/write loop.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
-	bool "Enable -u <user> option"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  This option allows the server to run as a specific user
-	  rather than defaulting to the user that starts the server.
-	  Use of this option requires special privileges to change to a
-	  different user.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
-	bool "Enable Basic http Authentication"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  Utilizes password settings from /etc/httpd.conf for basic
-	  authentication on a per url basis.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
-	bool "Support MD5 crypted passwords for http Authentication"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
-	help
-	  Enables basic per URL authentication from /etc/httpd.conf
-	  using md5 passwords.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
-	bool "Support Common Gateway Interface (CGI)"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  This option allows scripts and executables to be invoked
-	  when specific URLs are requested.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
-	bool "Support for running scripts through an interpreter"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
-	help
-	  This option enables support for running scripts through an
-	  interpreter. Turn this on if you want PHP scripts to work
-	  properly. You need to supply an additional line in your httpd
-	  config file:
-	  *.php:/path/to/your/php
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
-	bool "Set REMOTE_PORT environment variable for CGI"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
-	help
-	  Use of this option can assist scripts in generating
-	  references that contain a unique port number.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
-	bool "Enable -e option (useful for CGIs written as shell scripts)"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  This option allows html encoding of arbitrary strings for display
-	  by the browser. Output goes to stdout.
-	  For example, httpd -e "<Hello World>" produces
-	  "&#60Hello&#32World&#62".
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
-	bool "Support for custom error pages"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  This option allows you to define custom error pages in
-	  the configuration file instead of the default HTTP status
-	  error pages. For instance, if you add the line:
-	        E404:/path/e404.html
-	  in the config file, the server will respond the specified
-	  '/path/e404.html' file instead of the terse '404 NOT FOUND'
-	  message.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
-	bool "Support for reverse proxy"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  This option allows you to define URLs that will be forwarded
-	  to another HTTP server. To setup add the following line to the
-	  configuration file
-	        P:/url/:http://hostname[:port]/new/path/
-	  Then a request to /url/myfile will be forwarded to
-	  http://hostname[:port]/new/path/myfile.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
-	bool "Support for GZIP content encoding"
-	default n
-	depends on BUSYBOX_CONFIG_HTTPD
-	help
-	  Makes httpd send files using GZIP content encoding if the
-	  client supports it and a pre-compressed <file>.gz exists.
-
-config BUSYBOX_CONFIG_IFCONFIG
-	bool "ifconfig"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Ifconfig is used to configure the kernel-resident network interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
-	bool "Enable status reporting output (+7k)"
-	default y
-	depends on BUSYBOX_CONFIG_IFCONFIG
-	help
-	  If ifconfig is called with no arguments it will display the status
-	  of the currently active interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
-	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
-	default n
-	depends on BUSYBOX_CONFIG_IFCONFIG
-	help
-	  Allow "keepalive" and "outfill" support for SLIP. If you're not
-	  planning on using serial lines, leave this unchecked.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
-	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
-	default n
-	depends on BUSYBOX_CONFIG_IFCONFIG
-	help
-	  Allow the start address for shared memory, start address for I/O,
-	  and/or the interrupt line used by the specified device.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
-	bool "Enable option \"hw\" (ether only)"
-	default y
-	depends on BUSYBOX_CONFIG_IFCONFIG
-	help
-	  Set the hardware address of this interface, if the device driver
-	  supports  this  operation. Currently, we only support the 'ether'
-	  class.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
-	bool "Set the broadcast automatically"
-	default y
-	depends on BUSYBOX_CONFIG_IFCONFIG
-	help
-	  Setting this will make ifconfig attempt to find the broadcast
-	  automatically if the value '+' is used.
-
-config BUSYBOX_CONFIG_IFENSLAVE
-	bool "ifenslave"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Userspace application to bind several interfaces
-	  to a logical interface (use with kernel bonding driver).
-
-config BUSYBOX_CONFIG_IFPLUGD
-	bool "ifplugd"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Network interface plug detection daemon.
-
-config BUSYBOX_CONFIG_IFUPDOWN
-	bool "ifupdown"
-	default n
-	help
-	  Activate or deactivate the specified interfaces. This applet makes
-	  use of either "ifconfig" and "route" or the "ip" command to actually
-	  configure network interfaces. Therefore, you will probably also want
-	  to enable either IFCONFIG and ROUTE, or enable
-	  FEATURE_IFUPDOWN_IP and the various IP options. Of
-	  course you could use non-busybox versions of these programs, so
-	  against my better judgement (since this will surely result in plenty
-	  of support questions on the mailing list), I do not force you to
-	  enable these additional options. It is up to you to supply either
-	  "ifconfig", "route" and "run-parts" or the "ip" command, either
-	  via busybox or via standalone utilities.
-
-config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
-	string "Absolute path to ifstate file"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  ifupdown keeps state information in a file called ifstate.
-	  Typically it is located in /var/run/ifstate, however
-	  some distributions tend to put it in other places
-	  (debian, for example, uses /etc/network/run/ifstate).
-	  This config option defines location of ifstate.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
-	bool "Use ip applet"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  Use the iproute "ip" command to implement "ifup" and "ifdown", rather
-	  than the default of using the older 'ifconfig' and 'route' utilities.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
-	bool "Use busybox ip applet"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_IP
-	select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-	select BUSYBOX_CONFIG_FEATURE_IP_LINK
-	select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-	help
-	  Use the busybox iproute "ip" applet to implement "ifupdown".
-
-	  If left disabled, you must install the full-blown iproute2
-	  utility or the  "ifup" and "ifdown" applets will not work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
-	bool "Use busybox ifconfig and route applets"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
-	select BUSYBOX_CONFIG_IFCONFIG
-	select BUSYBOX_CONFIG_ROUTE
-	help
-	  Use the busybox iproute "ifconfig" and "route" applets to
-	  implement the "ifup" and "ifdown" utilities.
-
-	  If left disabled, you must install the full-blown ifconfig
-	  and route utilities, or the  "ifup" and "ifdown" applets will not
-	  work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
-	bool "Support for IPv4"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  If you want ifup/ifdown to talk IPv4, leave this on.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
-	bool "Support for IPv6"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
-	help
-	  If you need support for IPv6, turn this option on.
-
-### UNUSED
-###config FEATURE_IFUPDOWN_IPX
-###	bool "Support for IPX"
-###	default y
-###	depends on IFUPDOWN
-###	help
-###	  If this option is selected you can use busybox to work with IPX
-###	  networks.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
-	bool "Enable mapping support"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  This enables support for the "mapping" stanza, unless you have
-	  a weird network setup you don't need it.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
-	bool "Support for external dhcp clients"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  This enables support for the external dhcp clients. Clients are
-	  tried in the following order: dhcpcd, dhclient, pump and udhcpc.
-	  Otherwise, if udhcpc applet is enabled, it is used.
-	  Otherwise, ifup/ifdown will have no support for DHCP.
-
-config BUSYBOX_CONFIG_INETD
-	bool "inetd"
-	default n
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  Internet superserver daemon
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
-	bool "Support echo service"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	help
-	  Echo received data internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
-	bool "Support discard service"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	help
-	  Internet /dev/null internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
-	bool "Support time service"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	help
-	  Return 32 bit time since 1900 internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
-	bool "Support daytime service"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	help
-	  Return human-readable time internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
-	bool "Support chargen service"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	help
-	  Familiar character generator internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_RPC
-	bool "Support RPC services"
-	default n
-	depends on BUSYBOX_CONFIG_INETD
-	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
-	help
-	  Support Sun-RPC based services
-
-config BUSYBOX_CONFIG_IP
-	bool "ip"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The "ip" applet is a TCP/IP interface configuration and routing
-	  utility. You generally don't need "ip" to use busybox with
-	  TCP/IP.
-
-config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-	bool "ip address"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Address manipulation support for the "ip" applet.
-
-config BUSYBOX_CONFIG_FEATURE_IP_LINK
-	bool "ip link"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Configure network devices with "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-	bool "ip route"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Add support for routing table management to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
-	bool "ip tunnel"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Add support for tunneling commands to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_RULE
-	bool "ip rule"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Add support for rule commands to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
-	bool "Support short forms of ip commands"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  Also support short-form of ip <OBJECT> commands:
-	  ip addr   -> ipaddr
-	  ip link   -> iplink
-	  ip route  -> iproute
-	  ip tunnel -> iptunnel
-	  ip rule   -> iprule
-
-	  Say N unless you desparately need the short form of the ip
-	  object commands.
-
-config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
-	bool "Support displaying rarely used link types"
-	default n
-	depends on BUSYBOX_CONFIG_IP
-	help
-	  If you are not going to use links of type "frad", "econet",
-	  "bif" etc, you probably don't need to enable this.
-	  Ethernet, wireless, infrared, ppp/slip, ip tunnelling
-	  link types are supported without this option selected.
-
-config BUSYBOX_CONFIG_IPADDR
-	bool
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-
-config BUSYBOX_CONFIG_IPLINK
-	bool
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
-
-config BUSYBOX_CONFIG_IPROUTE
-	bool
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-
-config BUSYBOX_CONFIG_IPTUNNEL
-	bool
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
-
-config BUSYBOX_CONFIG_IPRULE
-	bool
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
-
-config BUSYBOX_CONFIG_IPCALC
-	bool "ipcalc"
-	default n
-	help
-	  ipcalc takes an IP address and netmask and calculates the
-	  resulting broadcast, network, and host range.
-
-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
-	bool "Fancy IPCALC, more options, adds 1 kbyte"
-	default n
-	depends on BUSYBOX_CONFIG_IPCALC
-	help
-	  Adds the options hostname, prefix and silent to the output of
-	  "ipcalc".
-
-config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
-	bool "Enable long options"
-	default n
-	depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
-	help
-	  Support long options for the ipcalc applet.
-
-config BUSYBOX_CONFIG_NETMSG
-	bool "netmsg"
-	default y
-	help
-	  simple program for sending udp broadcast messages
-
-config BUSYBOX_CONFIG_NETSTAT
-	bool "netstat"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  netstat prints information about the Linux networking subsystem.
-
-config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
-	bool "Enable wide netstat output"
-	default y
-	depends on BUSYBOX_CONFIG_NETSTAT
-	help
-	  Add support for wide columns. Useful when displaying IPv6 addresses
-	  (-W option).
-
-config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
-	bool "Enable PID/Program name output"
-	default y
-	depends on BUSYBOX_CONFIG_NETSTAT
-	help
-	  Add support for -p flag to print out PID and program name.
-	  +700 bytes of code.
-
-config BUSYBOX_CONFIG_NSLOOKUP
-	bool "nslookup"
-	default y
-	help
-	  nslookup is a tool to query Internet name servers.
-
-config BUSYBOX_CONFIG_NTPD
-	bool "ntpd"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The NTP client/server daemon.
-
-config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
-	bool "Make ntpd usable as a NTP server"
-	default y
-	depends on BUSYBOX_CONFIG_NTPD
-	help
-	  Make ntpd usable as a NTP server. If you disable this option
-	  ntpd will be usable only as a NTP client.
-
-config BUSYBOX_CONFIG_PSCAN
-	bool "pscan"
-	default n
-	help
-	  Simple network port scanner.
-
-config BUSYBOX_CONFIG_ROUTE
-	bool "route"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Route displays or manipulates the kernel's IP routing tables.
-
-config BUSYBOX_CONFIG_SLATTACH
-	bool "slattach"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  slattach is a small utility to attach network interfaces to serial
-	  lines.
-
-#config TC
-#	bool "tc"
-#	default y
-#	help
-#	  show / manipulate traffic control settings
-#
-#config FEATURE_TC_INGRESS
-#	def_bool n
-#	depends on TC
-
-config BUSYBOX_CONFIG_TCPSVD
-	bool "tcpsvd"
-	default n
-	help
-	  tcpsvd listens on a TCP port and runs a program for each new
-	  connection.
-
-config BUSYBOX_CONFIG_TELNET
-	bool "telnet"
-	default y
-	help
-	  Telnet is an interface to the TELNET protocol, but is also commonly
-	  used to test other simple protocols.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
-	bool "Pass TERM type to remote host"
-	default y
-	depends on BUSYBOX_CONFIG_TELNET
-	help
-	  Setting this option will forward the TERM environment variable to the
-	  remote host you are connecting to. This is useful to make sure that
-	  things like ANSI colors and other control sequences behave.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
-	bool "Pass USER type to remote host"
-	default n
-	depends on BUSYBOX_CONFIG_TELNET
-	help
-	  Setting this option will forward the USER environment variable to the
-	  remote host you are connecting to. This is useful when you need to
-	  log into a machine without telling the username (autologin). This
-	  option enables `-a' and `-l USER' arguments.
-
-config BUSYBOX_CONFIG_TELNETD
-	bool "telnetd"
-	default y
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  A daemon for the TELNET protocol, allowing you to log onto the host
-	  running the daemon. Please keep in mind that the TELNET protocol
-	  sends passwords in plain text. If you can't afford the space for an
-	  SSH daemon and you trust your network, you may say 'y' here. As a
-	  more secure alternative, you should seriously consider installing the
-	  very small Dropbear SSH daemon instead:
-		http://matt.ucc.asn.au/dropbear/dropbear.html
-
-	  Note that for busybox telnetd to work you need several things:
-	  First of all, your kernel needs:
-		  UNIX98_PTYS=y
-		  DEVPTS_FS=y
-
-	  Next, you need a /dev/pts directory on your root filesystem:
-
-		  $ ls -ld /dev/pts
-		  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
-
-	  Next you need the pseudo terminal master multiplexer /dev/ptmx:
-
-		  $ ls -la /dev/ptmx
-		  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
-
-	  Any /dev/ttyp[0-9]* files you may have can be removed.
-	  Next, you need to mount the devpts filesystem on /dev/pts using:
-
-		  mount -t devpts devpts /dev/pts
-
-	  You need to be sure that busybox has LOGIN and
-	  FEATURE_SUID enabled. And finally, you should make
-	  certain that Busybox has been installed setuid root:
-
-		chown root.root /bin/busybox
-		chmod 4755 /bin/busybox
-
-	  with all that done, telnetd _should_ work....
-
-
-config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
-	bool "Support standalone telnetd (not inetd only)"
-	default y
-	depends on BUSYBOX_CONFIG_TELNETD
-	help
-	  Selecting this will make telnetd able to run standalone.
-
-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
-	bool "Support -w SEC option (inetd wait mode)"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
-	help
-	  This option allows you to run telnetd in "inet wait" mode.
-	  Example inetd.conf line (note "wait", not usual "nowait"):
-
-	  telnet stream tcp wait root /bin/telnetd telnetd -w10
-
-	  In this example, inetd passes _listening_ socket_ as fd 0
-	  to telnetd when connection appears.
-	  telnetd will wait for connections until all existing
-	  connections are closed, and no new connections
-	  appear during 10 seconds. Then it exits, and inetd continues
-	  to listen for new connections.
-
-	  This option is rarely used. "tcp nowait" is much more usual
-	  way of running tcp services, including telnetd.
-	  You most probably want to say N here.
-
-config BUSYBOX_CONFIG_TFTP
-	bool "tftp"
-	default n
-	help
-	  This enables the Trivial File Transfer Protocol client program. TFTP
-	  is usually used for simple, small transfers such as a root image
-	  for a network-enabled bootloader.
-
-config BUSYBOX_CONFIG_TFTPD
-	bool "tftpd"
-	default n
-	help
-	  This enables the Trivial File Transfer Protocol server program.
-	  It expects that stdin is a datagram socket and a packet
-	  is already pending on it. It will exit after one transfer.
-	  In other words: it should be run from inetd in nowait mode,
-	  or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
-
-comment "Common options for tftp/tftpd"
-	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_GET
-	bool "Enable 'tftp get' and/or tftpd upload code"
-	default n
-	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-	help
-	  Add support for the GET command within the TFTP client. This allows
-	  a client to retrieve a file from a TFTP server.
-	  Also enable upload support in tftpd, if tftpd is selected.
-
-	  Note: this option does _not_ make tftpd capable of download
-	  (the usual operation people need from it)!
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
-	bool "Enable 'tftp put' and/or tftpd download code"
-	default n
-	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-	help
-	  Add support for the PUT command within the TFTP client. This allows
-	  a client to transfer a file to a TFTP server.
-	  Also enable download support in tftpd, if tftpd is selected.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
-	bool "Enable 'blksize' and 'tsize' protocol options"
-	default n
-	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-	help
-	  Allow tftp to specify block size, and tftpd to understand
-	  "blksize" and "tsize" options.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
-	bool "Enable tftp progress meter"
-	default n
-	depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
-	help
-	  Show progress bar.
-
-config BUSYBOX_CONFIG_TFTP_DEBUG
-	bool "Enable debug"
-	default n
-	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-	help
-	  Make tftp[d] print debugging messages on stderr.
-	  This is useful if you are diagnosing a bug in tftp[d].
-
-config BUSYBOX_CONFIG_TRACEROUTE
-	bool "traceroute"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Utility to trace the route of IP packets.
-
-config BUSYBOX_CONFIG_TRACEROUTE6
-	bool "traceroute6"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
-	help
-	  Utility to trace the route of IPv6 packets.
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
-	bool "Enable verbose output"
-	default y
-	depends on BUSYBOX_CONFIG_TRACEROUTE
-	help
-	  Add some verbosity to traceroute. This includes among other things
-	  hostnames and ICMP response types.
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
-	bool "Enable loose source route"
-	default n
-	depends on BUSYBOX_CONFIG_TRACEROUTE
-	help
-	  Add option to specify a loose source route gateway
-	  (8 maximum).
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
-	bool "Use ICMP instead of UDP"
-	default n
-	depends on BUSYBOX_CONFIG_TRACEROUTE
-	help
-	  Add option -I to use ICMP ECHO instead of UDP datagrams.
-
-config BUSYBOX_CONFIG_TUNCTL
-	bool "tunctl"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  tunctl creates or deletes tun devices.
-
-config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
-	bool "Support owner:group assignment"
-	default n
-	depends on BUSYBOX_CONFIG_TUNCTL
-	help
-	  Allow to specify owner and group of newly created interface.
-	  340 bytes of pure bloat. Say no here.
-
-source package/utils/busybox/config/networking/udhcp/Config.in
-
-config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
-	string "ifup udhcpc command line options"
-	default "-R -n"
-	depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
-	help
-	  Command line options to pass to udhcpc from ifup.
-	  Intended to alter options not available in /etc/network/interfaces.
-	  (IE: --syslog --background etc...)
-
-config BUSYBOX_CONFIG_UDPSVD
-	bool "udpsvd"
-	default n
-	help
-	  udpsvd listens on an UDP port and runs a program for each new
-	  connection.
-
-config BUSYBOX_CONFIG_VCONFIG
-	bool "vconfig"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Creates, removes, and configures VLAN interfaces
-
-config BUSYBOX_CONFIG_WGET
-	bool "wget"
-	default y
-	help
-	  wget is a utility for non-interactive download of files from HTTP,
-	  HTTPS, and FTP servers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
-	bool "Enable a nifty process meter (+2k)"
-	default y
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Enable the transfer progress bar for wget transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
-	bool "Enable HTTP authentication"
-	default y
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Support authenticated HTTP transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
-	help
-	  Support long options for the wget applet.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
-	bool "Enable read timeout option -T SEC"
-	default n
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Supports network read timeout for wget, so that wget will give
-	  up and timeout when reading network data, through the -T command
-	  line option.  Currently only network data read timeout is
-	  supported (i.e., timeout is not applied to the DNS nor TCP
-	  connection initialization).  When FEATURE_WGET_LONG_OPTIONS is
-	  also enabled, the --timeout option will work in addition to -T.
-
-config BUSYBOX_CONFIG_ZCIP
-	bool "zcip"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
-	  It's a daemon that allocates and defends a dynamically assigned
-	  address on the 169.254/16 network, requiring no system administrator.
-
-	  See http://www.zeroconf.org for further details, and "zcip.script"
-	  in the busybox examples.
-
-endmenu
diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in
deleted file mode 100644
index f4d26ec9c8..0000000000
--- a/package/utils/busybox/config/networking/udhcp/Config.in
+++ /dev/null
@@ -1,155 +0,0 @@
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-
-
-config BUSYBOX_CONFIG_UDHCPD
-	bool "udhcp server (udhcpd)"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  udhcpd is a DHCP server geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
-
-config BUSYBOX_CONFIG_DHCPRELAY
-	bool "dhcprelay"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD
-	help
-	  dhcprelay listens for dhcp requests on one or more interfaces
-	  and forwards these requests to a different interface or dhcp
-	  server.
-
-config BUSYBOX_CONFIG_DUMPLEASES
-	bool "Lease display utility (dumpleases)"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD
-	help
-	  dumpleases displays the leases written out by the udhcpd server.
-	  Lease times are stored in the file by time remaining in lease, or
-	  by the absolute time that it expires in seconds from epoch.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
-	bool "Rewrite the lease file at every new acknowledge"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD
-	help
-	  If selected, udhcpd will write a new file with leases every
-	  time a new lease has been accepted, thus eliminating the need
-	  to send SIGUSR1 for the initial writing or updating. Any timed
-	  rewriting remains undisturbed.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
-	bool "Select IP address based on client MAC"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD
-	help
-	  If selected, udhcpd will base its selection of IP address to offer
-	  on the client's hardware address. Otherwise udhcpd uses the next
-	  consecutive free address.
-
-	  This reduces the frequency of IP address changes for clients
-	  which let their lease expire, and makes consecutive DHCPOFFERS
-	  for the same client to (almost always) contain the same
-	  IP address.
-
-config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
-	string "Absolute path to lease file"
-	default "/var/run/udhcpd.leases"
-	depends on BUSYBOX_CONFIG_UDHCPD
-	help
-	  udhcpd stores addresses in a lease file. This is the absolute path
-	  of the file. Normally it is safe to leave it untouched.
-
-config BUSYBOX_CONFIG_UDHCPC
-	bool "udhcp client (udhcpc)"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  udhcpc is a DHCP client geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
-
-	  The udhcp client negotiates a lease with the DHCP server and
-	  runs a script when a lease is obtained or lost.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING
-	bool "Verify that the offered address is free, using ARP ping"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPC
-	help
-	  If selected, udhcpc will send ARP probes and make sure
-	  the offered address is really not in use by anyone. The client
-	  will DHCPDECLINE the offer if the address is in use,
-	  and restart the discover process.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
-	bool "Enable '-P port' option for udhcpd and udhcpc"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
-	help
-	  At the cost of ~300 bytes, enables -P port option.
-	  This feature is typically not needed.
-
-config BUSYBOX_CONFIG_UDHCP_DEBUG
-	int "Maximum verbosity level for udhcp applets (0..9)"
-	default 0
-	range 0 9
-	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
-	help
-	  Verbosity can be increased with multiple -v options.
-	  This option controls how high it can be cranked up.
-
-	  Bigger values result in bigger code. Levels above 1
-	  are very verbose and useful for debugging only.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
-	bool "Support for RFC3397 domain search (experimental)"
-	default y
-	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
-	help
-	  If selected, both client and server will support passing of domain
-	  search lists via option 119, specified in RFC 3397,
-	  and SIP servers option 120, specified in RFC 3361.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
-	bool "Support for 802.1Q VLAN parameters"
-	default n
-	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
-	help
-	  If selected, both client and server will support passing of VLAN
-	  ID and priority via options 132 and 133 as per 802.1Q.
-
-config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
-	string "Absolute path to config script"
-	default "/usr/share/udhcpc/default.script"
-	depends on BUSYBOX_CONFIG_UDHCPC
-	help
-	  This script is called after udhcpc receives an answer. See
-	  examples/udhcp for a working example. Normally it is safe
-	  to leave this untouched.
-
-config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
-	int "DHCP options slack buffer size"
-	default 80
-	range 0 924
-	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
-	help
-	  Some buggy DHCP servers send DHCP offer packets with option
-	  field larger than we expect (which might also be considered a
-	  buffer overflow attempt). These packets are normally discarded.
-	  If circumstances beyond your control force you to support such
-	  servers, this may help. The upper limit (924) makes dhcpc accept
-	  even 1500 byte packets (maximum-sized ethernet packets).
-
-	  This option does not make dhcp[cd] emit non-standard
-	  sized packets.
-
-	  Known buggy DHCP servers:
-	  3Com OfficeConnect Remote 812 ADSL Router:
-	    seems to confuse maximum allowed UDP packet size with
-	    maximum size of entire IP packet, and sends packets which are
-	    28 bytes too large.
-	  Seednet (ISP) VDSL: sends packets 2 bytes too large.