busybox: unindent busybox Config.in

This is to align with upstream change 72089cf ("config: deindent all
help texts") and to make the follow-up change syncing Config.in files
with current busybox version more reviewable

It was made with the following commands

	cd package/utils/busybox/config
	find . -name 'Config.in' | xargs sed -ir -e 's/^\t  \([^ ]\)/\t\1/'

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

2 files changed, 421 insertions, 421 deletions

diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
index 97a1bfbce5..f9063d367e 100644
--- a/package/utils/busybox/config/networking/Config.in
+++ b/package/utils/busybox/config/networking/Config.in
@@ -11,134 +11,134 @@ config BUSYBOX_CONFIG_FEATURE_IPV6
 	default BUSYBOX_DEFAULT_FEATURE_IPV6
 	depends on IPV6
 	help
-	  Enable IPv6 support in busybox.
-	  This adds IPv6 support in the networking applets.
+	Enable IPv6 support in busybox.
+	This adds IPv6 support in the networking applets.
 
 config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
 	bool "Enable Unix domain socket support (usually not needed)"
 	default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
 	help
-	  Enable Unix domain socket support in all busybox networking
-	  applets.  Address of the form local:/path/to/unix/socket
-	  will be recognized.
+	Enable Unix domain socket support in all busybox networking
+	applets.  Address of the form local:/path/to/unix/socket
+	will be recognized.
 
-	  This extension is almost never used in real world usage.
-	  You most likely want to say N.
+	This extension is almost never used in real world usage.
+	You most likely want to say N.
 
 config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
 	bool "Prefer IPv4 addresses from DNS queries"
 	default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
 	depends on BUSYBOX_CONFIG_FEATURE_IPV6
 	help
-	  Use IPv4 address of network host if it has one.
+	Use IPv4 address of network host if it has one.
 
-	  If this option is off, the first returned address will be used.
-	  This may cause problems when your DNS server is IPv6-capable and
-	  is returning IPv6 host addresses too. If IPv6 address
-	  precedes IPv4 one in DNS reply, busybox network applets
-	  (e.g. wget) will use IPv6 address. On an IPv6-incapable host
-	  or network applets will fail to connect to the host
-	  using IPv6 address.
+	If this option is off, the first returned address will be used.
+	This may cause problems when your DNS server is IPv6-capable and
+	is returning IPv6 host addresses too. If IPv6 address
+	precedes IPv4 one in DNS reply, busybox network applets
+	(e.g. wget) will use IPv6 address. On an IPv6-incapable host
+	or network applets will fail to connect to the host
+	using IPv6 address.
 
 config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
 	bool "Verbose resolution errors"
 	default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
 	help
-	  Enable if you are not satisfied with simplistic
-	  "can't resolve 'hostname.com'" and want to know more.
-	  This may increase size of your executable a bit.
+	Enable if you are not satisfied with simplistic
+	"can't resolve 'hostname.com'" and want to know more.
+	This may increase size of your executable a bit.
 
 config BUSYBOX_CONFIG_ARP
 	bool "arp"
 	default BUSYBOX_DEFAULT_ARP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Manipulate the system ARP cache.
+	Manipulate the system ARP cache.
 config BUSYBOX_CONFIG_ARPING
 	bool "arping"
 	default BUSYBOX_DEFAULT_ARPING
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Ping hosts by ARP packets.
+	Ping hosts by ARP packets.
 
 config BUSYBOX_CONFIG_BRCTL
 	bool "brctl"
 	default BUSYBOX_DEFAULT_BRCTL
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Manage ethernet bridges.
-	  Supports addbr/delbr and addif/delif.
+	Manage ethernet bridges.
+	Supports addbr/delbr and addif/delif.
 
 config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
 	bool "Fancy options"
 	default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
 	depends on BUSYBOX_CONFIG_BRCTL
 	help
-	  Add support for extended option like:
+	Add support for extended option like:
 	    setageing, setfd, sethello, setmaxage,
 	    setpathcost, setportprio, setbridgeprio,
 	    stp
-	  This adds about 600 bytes.
+	This adds about 600 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
 	bool "Support show"
 	default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
 	depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
 	help
-	  Add support for option which prints the current config:
+	Add support for option which prints the current config:
 	    show
 config BUSYBOX_CONFIG_DNSD
 	bool "dnsd"
 	default BUSYBOX_DEFAULT_DNSD
 	help
-	  Small and static DNS server daemon.
+	Small and static DNS server daemon.
 config BUSYBOX_CONFIG_ETHER_WAKE
 	bool "ether-wake"
 	default BUSYBOX_DEFAULT_ETHER_WAKE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Send a magic packet to wake up sleeping machines.
+	Send a magic packet to wake up sleeping machines.
 config BUSYBOX_CONFIG_FTPD
 	bool "ftpd"
 	default BUSYBOX_DEFAULT_FTPD
 	help
-	  Simple FTP daemon. You have to run it via inetd.
+	Simple FTP daemon. You have to run it via inetd.
 
 config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE
 	bool "Enable upload commands"
 	default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE
 	depends on BUSYBOX_CONFIG_FTPD
 	help
-	  Enable all kinds of FTP upload commands (-w option)
+	Enable all kinds of FTP upload commands (-w option)
 
 config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
 	bool "Enable workaround for RFC-violating clients"
 	default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
 	depends on BUSYBOX_CONFIG_FTPD
 	help
-	  Some ftp clients (among them KDE's Konqueror) issue illegal
-	  "LIST -l" requests. This option works around such problems.
-	  It might prevent you from listing files starting with "-" and
-	  it increases the code size by ~40 bytes.
-	  Most other ftp servers seem to behave similar to this.
+	Some ftp clients (among them KDE's Konqueror) issue illegal
+	"LIST -l" requests. This option works around such problems.
+	It might prevent you from listing files starting with "-" and
+	it increases the code size by ~40 bytes.
+	Most other ftp servers seem to behave similar to this.
 
 config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION
 	bool "Enable authentication"
 	default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION
 	depends on BUSYBOX_CONFIG_FTPD
 	help
-	  Enable basic system login as seen in telnet etc.
+	Enable basic system login as seen in telnet etc.
 config BUSYBOX_CONFIG_FTPGET
 	bool "ftpget"
 	default BUSYBOX_DEFAULT_FTPGET
 	help
-	  Retrieve a remote file via FTP.
+	Retrieve a remote file via FTP.
 
 config BUSYBOX_CONFIG_FTPPUT
 	bool "ftpput"
 	default BUSYBOX_DEFAULT_FTPPUT
 	help
-	  Store a remote file via FTP.
+	Store a remote file via FTP.
 
 config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
 	bool "Enable long options in ftpget/ftpput"
@@ -148,252 +148,252 @@ config BUSYBOX_CONFIG_HOSTNAME
 	bool "hostname"
 	default BUSYBOX_DEFAULT_HOSTNAME
 	help
-	  Show or set the system's host name.
+	Show or set the system's host name.
 
 config BUSYBOX_CONFIG_DNSDOMAINNAME
 	bool "dnsdomainname"
 	default BUSYBOX_DEFAULT_DNSDOMAINNAME
 	help
-	  Alias to "hostname -d".
+	Alias to "hostname -d".
 config BUSYBOX_CONFIG_HTTPD
 	bool "httpd"
 	default BUSYBOX_DEFAULT_HTTPD
 	help
-	  HTTP server.
+	HTTP server.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
 	bool "Support 'Ranges:' header"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  Makes httpd emit "Accept-Ranges: bytes" header and understand
-	  "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
-	  downloads, seeking in multimedia players etc.
+	Makes httpd emit "Accept-Ranges: bytes" header and understand
+	"Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+	downloads, seeking in multimedia players etc.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
 	bool "Enable -u <user> option"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  This option allows the server to run as a specific user
-	  rather than defaulting to the user that starts the server.
-	  Use of this option requires special privileges to change to a
-	  different user.
+	This option allows the server to run as a specific user
+	rather than defaulting to the user that starts the server.
+	Use of this option requires special privileges to change to a
+	different user.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 	bool "Enable Basic http Authentication"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  Utilizes password settings from /etc/httpd.conf for basic
-	  authentication on a per url basis.
-	  Example for httpd.conf file:
-	  /adm:toor:PaSsWd
+	Utilizes password settings from /etc/httpd.conf for basic
+	authentication on a per url basis.
+	Example for httpd.conf file:
+	/adm:toor:PaSsWd
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
 	bool "Support MD5 crypted passwords for http Authentication"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
 	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 	help
-	  Enables encrypted passwords, and wildcard user/passwords
-	  in httpd.conf file.
-	  User '*' means 'any system user name is ok',
-	  password of '*' means 'use system password for this user'
-	  Examples:
-	  /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
-	  /adm:root:*
-	  /wiki:*:*
+	Enables encrypted passwords, and wildcard user/passwords
+	in httpd.conf file.
+	User '*' means 'any system user name is ok',
+	password of '*' means 'use system password for this user'
+	Examples:
+	/adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+	/adm:root:*
+	/wiki:*:*
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 	bool "Support Common Gateway Interface (CGI)"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  This option allows scripts and executables to be invoked
-	  when specific URLs are requested.
+	This option allows scripts and executables to be invoked
+	when specific URLs are requested.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 	bool "Support running scripts through an interpreter"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 	help
-	  This option enables support for running scripts through an
-	  interpreter. Turn this on if you want PHP scripts to work
-	  properly. You need to supply an additional line in your
-	  httpd.conf file:
-	  *.php:/path/to/your/php
+	This option enables support for running scripts through an
+	interpreter. Turn this on if you want PHP scripts to work
+	properly. You need to supply an additional line in your
+	httpd.conf file:
+	*.php:/path/to/your/php
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
 	bool "Set REMOTE_PORT environment variable for CGI"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
 	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 	help
-	  Use of this option can assist scripts in generating
-	  references that contain a unique port number.
+	Use of this option can assist scripts in generating
+	references that contain a unique port number.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
 	bool "Enable -e option (useful for CGIs written as shell scripts)"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  This option allows html encoding of arbitrary strings for display
-	  by the browser. Output goes to stdout.
-	  For example, httpd -e "<Hello World>" produces
-	  "&#60Hello&#32World&#62".
+	This option allows html encoding of arbitrary strings for display
+	by the browser. Output goes to stdout.
+	For example, httpd -e "<Hello World>" produces
+	"&#60Hello&#32World&#62".
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
 	bool "Support custom error pages"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  This option allows you to define custom error pages in
-	  the configuration file instead of the default HTTP status
-	  error pages. For instance, if you add the line:
+	This option allows you to define custom error pages in
+	the configuration file instead of the default HTTP status
+	error pages. For instance, if you add the line:
 	        E404:/path/e404.html
-	  in the config file, the server will respond the specified
-	  '/path/e404.html' file instead of the terse '404 NOT FOUND'
-	  message.
+	in the config file, the server will respond the specified
+	'/path/e404.html' file instead of the terse '404 NOT FOUND'
+	message.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
 	bool "Support reverse proxy"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  This option allows you to define URLs that will be forwarded
-	  to another HTTP server. To setup add the following line to the
-	  configuration file
+	This option allows you to define URLs that will be forwarded
+	to another HTTP server. To setup add the following line to the
+	configuration file
 	        P:/url/:http://hostname[:port]/new/path/
-	  Then a request to /url/myfile will be forwarded to
-	  http://hostname[:port]/new/path/myfile.
+	Then a request to /url/myfile will be forwarded to
+	http://hostname[:port]/new/path/myfile.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
 	bool "Support GZIP content encoding"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
-	  Makes httpd send files using GZIP content encoding if the
-	  client supports it and a pre-compressed <file>.gz exists.
+	Makes httpd send files using GZIP content encoding if the
+	client supports it and a pre-compressed <file>.gz exists.
 config BUSYBOX_CONFIG_IFCONFIG
 	bool "ifconfig"
 	default BUSYBOX_DEFAULT_IFCONFIG
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Ifconfig is used to configure the kernel-resident network interfaces.
+	Ifconfig is used to configure the kernel-resident network interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
 	bool "Enable status reporting output (+7k)"
 	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  If ifconfig is called with no arguments it will display the status
-	  of the currently active interfaces.
+	If ifconfig is called with no arguments it will display the status
+	of the currently active interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
 	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
 	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  Allow "keepalive" and "outfill" support for SLIP. If you're not
-	  planning on using serial lines, leave this unchecked.
+	Allow "keepalive" and "outfill" support for SLIP. If you're not
+	planning on using serial lines, leave this unchecked.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
 	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
 	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  Allow the start address for shared memory, start address for I/O,
-	  and/or the interrupt line used by the specified device.
+	Allow the start address for shared memory, start address for I/O,
+	and/or the interrupt line used by the specified device.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
 	bool "Enable option \"hw\" (ether only)"
 	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  Set the hardware address of this interface, if the device driver
-	  supports  this  operation. Currently, we only support the 'ether'
-	  class.
+	Set the hardware address of this interface, if the device driver
+	supports  this  operation. Currently, we only support the 'ether'
+	class.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
 	bool "Set the broadcast automatically"
 	default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  Setting this will make ifconfig attempt to find the broadcast
-	  automatically if the value '+' is used.
+	Setting this will make ifconfig attempt to find the broadcast
+	automatically if the value '+' is used.
 config BUSYBOX_CONFIG_IFENSLAVE
 	bool "ifenslave"
 	default BUSYBOX_DEFAULT_IFENSLAVE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Userspace application to bind several interfaces
-	  to a logical interface (use with kernel bonding driver).
+	Userspace application to bind several interfaces
+	to a logical interface (use with kernel bonding driver).
 config BUSYBOX_CONFIG_IFPLUGD
 	bool "ifplugd"
 	default BUSYBOX_DEFAULT_IFPLUGD
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Network interface plug detection daemon.
+	Network interface plug detection daemon.
 config BUSYBOX_CONFIG_IFUP
 	bool "ifup"
 	default BUSYBOX_DEFAULT_IFUP
 	help
-	  Activate the specified interfaces. This applet makes use
-	  of either "ifconfig" and "route" or the "ip" command to actually
-	  configure network interfaces. Therefore, you will probably also want
-	  to enable either IFCONFIG and ROUTE, or enable
-	  FEATURE_IFUPDOWN_IP and the various IP options. Of
-	  course you could use non-busybox versions of these programs, so
-	  against my better judgement (since this will surely result in plenty
-	  of support questions on the mailing list), I do not force you to
-	  enable these additional options. It is up to you to supply either
-	  "ifconfig", "route" and "run-parts" or the "ip" command, either
-	  via busybox or via standalone utilities.
+	Activate the specified interfaces. This applet makes use
+	of either "ifconfig" and "route" or the "ip" command to actually
+	configure network interfaces. Therefore, you will probably also want
+	to enable either IFCONFIG and ROUTE, or enable
+	FEATURE_IFUPDOWN_IP and the various IP options. Of
+	course you could use non-busybox versions of these programs, so
+	against my better judgement (since this will surely result in plenty
+	of support questions on the mailing list), I do not force you to
+	enable these additional options. It is up to you to supply either
+	"ifconfig", "route" and "run-parts" or the "ip" command, either
+	via busybox or via standalone utilities.
 
 config BUSYBOX_CONFIG_IFDOWN
 	bool "ifdown"
 	default BUSYBOX_DEFAULT_IFDOWN
 	help
-	  Deactivate the specified interfaces.
+	Deactivate the specified interfaces.
 
 config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
 	string "Absolute path to ifstate file"
 	default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  ifupdown keeps state information in a file called ifstate.
-	  Typically it is located in /var/run/ifstate, however
-	  some distributions tend to put it in other places
-	  (debian, for example, uses /etc/network/run/ifstate).
-	  This config option defines location of ifstate.
+	ifupdown keeps state information in a file called ifstate.
+	Typically it is located in /var/run/ifstate, however
+	some distributions tend to put it in other places
+	(debian, for example, uses /etc/network/run/ifstate).
+	This config option defines location of ifstate.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 	bool "Use ip tool (else ifconfig/route is used)"
 	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  Use the iproute "ip" command to implement "ifup" and "ifdown", rather
-	  than the default of using the older "ifconfig" and "route" utilities.
+	Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+	than the default of using the older "ifconfig" and "route" utilities.
 
-	  If Y: you must install either the full-blown iproute2 package
-	  or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
-	  will not work.
+	If Y: you must install either the full-blown iproute2 package
+	or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
+	will not work.
 
-	  If N: you must install either the full-blown ifconfig and route
-	  utilities, or enable these applets in Busybox.
+	If N: you must install either the full-blown ifconfig and route
+	utilities, or enable these applets in Busybox.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
 	bool "Support IPv4"
 	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  If you want ifup/ifdown to talk IPv4, leave this on.
+	If you want ifup/ifdown to talk IPv4, leave this on.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 	bool "Support IPv6"
 	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
 	depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6
 	help
-	  If you need support for IPv6, turn this option on.
+	If you need support for IPv6, turn this option on.
 
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
@@ -401,68 +401,68 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
 	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  This enables support for the "mapping" stanza, unless you have
-	  a weird network setup you don't need it.
+	This enables support for the "mapping" stanza, unless you have
+	a weird network setup you don't need it.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
 	bool "Support external DHCP clients"
 	default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  This enables support for the external dhcp clients. Clients are
-	  tried in the following order: dhcpcd, dhclient, pump and udhcpc.
-	  Otherwise, if udhcpc applet is enabled, it is used.
-	  Otherwise, ifup/ifdown will have no support for DHCP.
+	This enables support for the external dhcp clients. Clients are
+	tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+	Otherwise, if udhcpc applet is enabled, it is used.
+	Otherwise, ifup/ifdown will have no support for DHCP.
 config BUSYBOX_CONFIG_INETD
 	bool "inetd"
 	default BUSYBOX_DEFAULT_INETD
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  Internet superserver daemon
+	Internet superserver daemon
 
 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
 	bool "Support echo service"
 	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
 	depends on BUSYBOX_CONFIG_INETD
 	help
-	  Echo received data internal inetd service
+	Echo received data internal inetd service
 
 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
 	bool "Support discard service"
 	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
 	depends on BUSYBOX_CONFIG_INETD
 	help
-	  Internet /dev/null internal inetd service
+	Internet /dev/null internal inetd service
 
 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
 	bool "Support time service"
 	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
 	depends on BUSYBOX_CONFIG_INETD
 	help
-	  Return 32 bit time since 1900 internal inetd service
+	Return 32 bit time since 1900 internal inetd service
 
 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
 	bool "Support daytime service"
 	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
 	depends on BUSYBOX_CONFIG_INETD
 	help
-	  Return human-readable time internal inetd service
+	Return human-readable time internal inetd service
 
 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
 	bool "Support chargen service"
 	default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
 	depends on BUSYBOX_CONFIG_INETD
 	help
-	  Familiar character generator internal inetd service
+	Familiar character generator internal inetd service
 
 config BUSYBOX_CONFIG_IP
 	bool "ip"
 	default BUSYBOX_DEFAULT_IP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The "ip" applet is a TCP/IP interface configuration and routing
-	  utility. You generally don't need "ip" to use busybox with
-	  TCP/IP.
+	The "ip" applet is a TCP/IP interface configuration and routing
+	utility. You generally don't need "ip" to use busybox with
+	TCP/IP.
 
 config BUSYBOX_CONFIG_IPADDR
 	bool "ipaddr"
@@ -470,7 +470,7 @@ config BUSYBOX_CONFIG_IPADDR
 	select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip addr: ipaddr
+	Support short form of ip addr: ipaddr
 
 config BUSYBOX_CONFIG_IPLINK
 	bool "iplink"
@@ -478,7 +478,7 @@ config BUSYBOX_CONFIG_IPLINK
 	select BUSYBOX_CONFIG_FEATURE_IP_LINK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip link: iplink
+	Support short form of ip link: iplink
 
 config BUSYBOX_CONFIG_IPROUTE
 	bool "iproute"
@@ -486,7 +486,7 @@ config BUSYBOX_CONFIG_IPROUTE
 	select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip route: iproute
+	Support short form of ip route: iproute
 
 config BUSYBOX_CONFIG_IPTUNNEL
 	bool "iptunnel"
@@ -494,7 +494,7 @@ config BUSYBOX_CONFIG_IPTUNNEL
 	select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip tunnel: iptunnel
+	Support short form of ip tunnel: iptunnel
 
 config BUSYBOX_CONFIG_IPRULE
 	bool "iprule"
@@ -502,7 +502,7 @@ config BUSYBOX_CONFIG_IPRULE
 	select BUSYBOX_CONFIG_FEATURE_IP_RULE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip rule: iprule
+	Support short form of ip rule: iprule
 
 config BUSYBOX_CONFIG_IPNEIGH
 	bool "ipneigh"
@@ -510,72 +510,72 @@ config BUSYBOX_CONFIG_IPNEIGH
 	select BUSYBOX_CONFIG_FEATURE_IP_NEIGH
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Support short form of ip neigh: ipneigh
+	Support short form of ip neigh: ipneigh
 
 config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
 	bool "ip address"
 	default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR
 	help
-	  Address manipulation support for the "ip" applet.
+	Address manipulation support for the "ip" applet.
 
 config BUSYBOX_CONFIG_FEATURE_IP_LINK
 	bool "ip link"
 	default BUSYBOX_DEFAULT_FEATURE_IP_LINK
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK
 	help
-	  Configure network devices with "ip".
+	Configure network devices with "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 	bool "ip route"
 	default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE
 	help
-	  Add support for routing table management to "ip".
+	Add support for routing table management to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR
 	string "ip route configuration directory"
 	default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
 	depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 	help
-	  Location of the "ip" applet routing configuration.
+	Location of the "ip" applet routing configuration.
 
 config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
 	bool "ip tunnel"
 	default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL
 	help
-	  Add support for tunneling commands to "ip".
+	Add support for tunneling commands to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_RULE
 	bool "ip rule"
 	default BUSYBOX_DEFAULT_FEATURE_IP_RULE
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE
 	help
-	  Add support for rule commands to "ip".
+	Add support for rule commands to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_NEIGH
 	bool "ip neighbor"
 	default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH
 	help
-	  Add support for neighbor commands to "ip".
+	Add support for neighbor commands to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
 	bool "Support displaying rarely used link types"
 	default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
 	depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH
 	help
-	  If you are not going to use links of type "frad", "econet",
-	  "bif" etc, you probably don't need to enable this.
-	  Ethernet, wireless, infrared, ppp/slip, ip tunnelling
-	  link types are supported without this option selected.
+	If you are not going to use links of type "frad", "econet",
+	"bif" etc, you probably don't need to enable this.
+	Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+	link types are supported without this option selected.
 config BUSYBOX_CONFIG_IPCALC
 	bool "ipcalc"
 	default BUSYBOX_DEFAULT_IPCALC
 	help
-	  ipcalc takes an IP address and netmask and calculates the
-	  resulting broadcast, network, and host range.
+	ipcalc takes an IP address and netmask and calculates the
+	resulting broadcast, network, and host range.
 
 config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
 	bool "Enable long options"
@@ -587,39 +587,39 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
 	default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
 	depends on BUSYBOX_CONFIG_IPCALC
 	help
-	  Adds the options hostname, prefix and silent to the output of
-	  "ipcalc".
+	Adds the options hostname, prefix and silent to the output of
+	"ipcalc".
 config BUSYBOX_CONFIG_FAKEIDENTD
 	bool "fakeidentd"
 	default BUSYBOX_DEFAULT_FAKEIDENTD
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  fakeidentd listens on the ident port and returns a predefined
-	  fake value on any query.
+	fakeidentd listens on the ident port and returns a predefined
+	fake value on any query.
 config BUSYBOX_CONFIG_NAMEIF
 	bool "nameif"
 	default BUSYBOX_DEFAULT_NAMEIF
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  nameif is used to rename network interface by its MAC address.
-	  Renamed interfaces MUST be in the down state.
-	  It is possible to use a file (default: /etc/mactab)
-	  with list of new interface names and MACs.
-	  Maximum interface name length: IFNAMSIZ = 16
-	  File fields are separated by space or tab.
-	  File format:
-	  # Comment
-	  new_interface_name    XX:XX:XX:XX:XX:XX
+	nameif is used to rename network interface by its MAC address.
+	Renamed interfaces MUST be in the down state.
+	It is possible to use a file (default: /etc/mactab)
+	with list of new interface names and MACs.
+	Maximum interface name length: IFNAMSIZ = 16
+	File fields are separated by space or tab.
+	File format:
+	# Comment
+	new_interface_name    XX:XX:XX:XX:XX:XX
 
 config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
 	bool "Extended nameif"
 	default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
 	depends on BUSYBOX_CONFIG_NAMEIF
 	help
-	  This extends the nameif syntax to support the bus_info, driver,
-	  phyaddr selectors. The syntax is compatible to the normal nameif.
-	  File format:
+	This extends the nameif syntax to support the bus_info, driver,
+	phyaddr selectors. The syntax is compatible to the normal nameif.
+	File format:
 	    new_interface_name  driver=asix bus=usb-0000:00:08.2-3
 	    new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
 	    new_interface_name  phy_address=2 00:80:C8:38:91:B5
@@ -629,77 +629,77 @@ config BUSYBOX_CONFIG_NBDCLIENT
 	bool "nbd-client"
 	default BUSYBOX_DEFAULT_NBDCLIENT
 	help
-	  Network block device client
+	Network block device client
 config BUSYBOX_CONFIG_NC
 	bool "nc"
 	default BUSYBOX_DEFAULT_NC
 	help
-	  A simple Unix utility which reads and writes data across network
-	  connections.
+	A simple Unix utility which reads and writes data across network
+	connections.
 
 config BUSYBOX_CONFIG_NC_SERVER
 	bool "Netcat server options (-l)"
 	default BUSYBOX_DEFAULT_NC_SERVER
 	depends on BUSYBOX_CONFIG_NC
 	help
-	  Allow netcat to act as a server.
+	Allow netcat to act as a server.
 
 config BUSYBOX_CONFIG_NC_EXTRA
 	bool "Netcat extensions (-eiw and -f FILE)"
 	default BUSYBOX_DEFAULT_NC_EXTRA
 	depends on BUSYBOX_CONFIG_NC
 	help
-	  Add -e (support for executing the rest of the command line after
-	  making or receiving a successful connection), -i (delay interval for
-	  lines sent), -w (timeout for initial connection).
+	Add -e (support for executing the rest of the command line after
+	making or receiving a successful connection), -i (delay interval for
+	lines sent), -w (timeout for initial connection).
 
 config BUSYBOX_CONFIG_NC_110_COMPAT
 	bool "Netcat 1.10 compatibility (+2.5k)"
 	default BUSYBOX_DEFAULT_NC_110_COMPAT  # off specially for Rob
 	depends on BUSYBOX_CONFIG_NC
 	help
-	  This option makes nc closely follow original nc-1.10.
-	  The code is about 2.5k bigger. It enables
-	  -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
-	  busybox-specific extensions: -f FILE.
+	This option makes nc closely follow original nc-1.10.
+	The code is about 2.5k bigger. It enables
+	-s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+	busybox-specific extensions: -f FILE.
 config BUSYBOX_CONFIG_NETMSG
 	bool "netmsg"
 	default BUSYBOX_DEFAULT_NETMSG
 	help
-	  simple program for sending udp broadcast messages
+	simple program for sending udp broadcast messages
 config BUSYBOX_CONFIG_NETSTAT
 	bool "netstat"
 	default BUSYBOX_DEFAULT_NETSTAT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  netstat prints information about the Linux networking subsystem.
+	netstat prints information about the Linux networking subsystem.
 
 config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
 	bool "Enable wide output"
 	default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
 	depends on BUSYBOX_CONFIG_NETSTAT
 	help
-	  Add support for wide columns. Useful when displaying IPv6 addresses
-	  (-W option).
+	Add support for wide columns. Useful when displaying IPv6 addresses
+	(-W option).
 
 config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
 	bool "Enable PID/Program name output"
 	default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
 	depends on BUSYBOX_CONFIG_NETSTAT
 	help
-	  Add support for -p flag to print out PID and program name.
-	  +700 bytes of code.
+	Add support for -p flag to print out PID and program name.
+	+700 bytes of code.
 config BUSYBOX_CONFIG_NSLOOKUP
 	bool "nslookup"
 	default BUSYBOX_DEFAULT_NSLOOKUP
 	help
-	  nslookup is a tool to query Internet name servers.
+	nslookup is a tool to query Internet name servers.
 config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT
 	bool "nslookup_lede"
 	depends on !BUSYBOX_CONFIG_NSLOOKUP
 	default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
 	help
-	  nslookup is a tool to query Internet name servers (OpenWrt flavor).
+	nslookup is a tool to query Internet name servers (OpenWrt flavor).
 
 config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
        bool "Enable long options"
@@ -712,107 +712,107 @@ config BUSYBOX_CONFIG_NTPD
 	default BUSYBOX_DEFAULT_NTPD
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  The NTP client/server daemon.
+	The NTP client/server daemon.
 
 config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
 	bool "Make ntpd usable as a NTP server"
 	default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
 	depends on BUSYBOX_CONFIG_NTPD
 	help
-	  Make ntpd usable as a NTP server. If you disable this option
-	  ntpd will be usable only as a NTP client.
+	Make ntpd usable as a NTP server. If you disable this option
+	ntpd will be usable only as a NTP client.
 
 config BUSYBOX_CONFIG_FEATURE_NTPD_CONF
 	bool "Make ntpd understand /etc/ntp.conf"
 	default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF
 	depends on BUSYBOX_CONFIG_NTPD
 	help
-	  Make ntpd look in /etc/ntp.conf for peers. Only "server address"
-	  is supported.
+	Make ntpd look in /etc/ntp.conf for peers. Only "server address"
+	is supported.
 config BUSYBOX_CONFIG_PING
 	bool "ping"
 	default BUSYBOX_DEFAULT_PING
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
-	  elicit an ICMP ECHO_RESPONSE from a host or gateway.
+	ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+	elicit an ICMP ECHO_RESPONSE from a host or gateway.
 
 config BUSYBOX_CONFIG_PING6
 	bool "ping6"
 	default BUSYBOX_DEFAULT_PING6
 	depends on BUSYBOX_CONFIG_FEATURE_IPV6
 	help
-	  This will give you a ping that can talk IPv6.
+	This will give you a ping that can talk IPv6.
 
 config BUSYBOX_CONFIG_FEATURE_FANCY_PING
 	bool "Enable fancy ping output"
 	default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
 	depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6
 	help
-	  Make the output from the ping applet include statistics, and at the
-	  same time provide full support for ICMP packets.
+	Make the output from the ping applet include statistics, and at the
+	same time provide full support for ICMP packets.
 config BUSYBOX_CONFIG_PSCAN
 	bool "pscan"
 	default BUSYBOX_DEFAULT_PSCAN
 	help
-	  Simple network port scanner.
+	Simple network port scanner.
 config BUSYBOX_CONFIG_ROUTE
 	bool "route"
 	default BUSYBOX_DEFAULT_ROUTE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Route displays or manipulates the kernel's IP routing tables.
+	Route displays or manipulates the kernel's IP routing tables.
 config BUSYBOX_CONFIG_SLATTACH
 	bool "slattach"
 	default BUSYBOX_DEFAULT_SLATTACH
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  slattach is a small utility to attach network interfaces to serial
-	  lines.
+	slattach is a small utility to attach network interfaces to serial
+	lines.
 config BUSYBOX_CONFIG_SSL_CLIENT
 	bool "ssl_client"
 	default BUSYBOX_DEFAULT_SSL_CLIENT
 	select BUSYBOX_CONFIG_TLS
 	help
-	  This tool pipes data to/from a socket, TLS-encrypting it.
+	This tool pipes data to/from a socket, TLS-encrypting it.
 config BUSYBOX_CONFIG_TCPSVD
 	bool "tcpsvd"
 	default BUSYBOX_DEFAULT_TCPSVD
 	help
-	  tcpsvd listens on a TCP port and runs a program for each new
-	  connection.
+	tcpsvd listens on a TCP port and runs a program for each new
+	connection.
 
 config BUSYBOX_CONFIG_UDPSVD
 	bool "udpsvd"
 	default BUSYBOX_DEFAULT_UDPSVD
 	help
-	  udpsvd listens on an UDP port and runs a program for each new
-	  connection.
+	udpsvd listens on an UDP port and runs a program for each new
+	connection.
 config BUSYBOX_CONFIG_TELNET
 	bool "telnet"
 	default BUSYBOX_DEFAULT_TELNET
 	help
-	  Telnet is an interface to the TELNET protocol, but is also commonly
-	  used to test other simple protocols.
+	Telnet is an interface to the TELNET protocol, but is also commonly
+	used to test other simple protocols.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
 	bool "Pass TERM type to remote host"
 	default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
 	depends on BUSYBOX_CONFIG_TELNET
 	help
-	  Setting this option will forward the TERM environment variable to the
-	  remote host you are connecting to. This is useful to make sure that
-	  things like ANSI colors and other control sequences behave.
+	Setting this option will forward the TERM environment variable to the
+	remote host you are connecting to. This is useful to make sure that
+	things like ANSI colors and other control sequences behave.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
 	bool "Pass USER type to remote host"
 	default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
 	depends on BUSYBOX_CONFIG_TELNET
 	help
-	  Setting this option will forward the USER environment variable to the
-	  remote host you are connecting to. This is useful when you need to
-	  log into a machine without telling the username (autologin). This
-	  option enables `-a' and `-l USER' arguments.
+	Setting this option will forward the USER environment variable to the
+	remote host you are connecting to. This is useful when you need to
+	log into a machine without telling the username (autologin). This
+	option enables `-a' and `-l USER' arguments.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH
 	bool "Enable window size autodetection"
@@ -823,86 +823,86 @@ config BUSYBOX_CONFIG_TELNETD
 	default BUSYBOX_DEFAULT_TELNETD
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  A daemon for the TELNET protocol, allowing you to log onto the host
-	  running the daemon. Please keep in mind that the TELNET protocol
-	  sends passwords in plain text. If you can't afford the space for an
-	  SSH daemon and you trust your network, you may say 'y' here. As a
-	  more secure alternative, you should seriously consider installing the
-	  very small Dropbear SSH daemon instead:
+	A daemon for the TELNET protocol, allowing you to log onto the host
+	running the daemon. Please keep in mind that the TELNET protocol
+	sends passwords in plain text. If you can't afford the space for an
+	SSH daemon and you trust your network, you may say 'y' here. As a
+	more secure alternative, you should seriously consider installing the
+	very small Dropbear SSH daemon instead:
 		http://matt.ucc.asn.au/dropbear/dropbear.html
 
-	  Note that for busybox telnetd to work you need several things:
-	  First of all, your kernel needs:
+	Note that for busybox telnetd to work you need several things:
+	First of all, your kernel needs:
 		  CONFIG_UNIX98_PTYS=y
 
-	  Next, you need a /dev/pts directory on your root filesystem:
+	Next, you need a /dev/pts directory on your root filesystem:
 
 		  $ ls -ld /dev/pts
 		  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
 
-	  Next you need the pseudo terminal master multiplexer /dev/ptmx:
+	Next you need the pseudo terminal master multiplexer /dev/ptmx:
 
 		  $ ls -la /dev/ptmx
 		  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
 
-	  Any /dev/ttyp[0-9]* files you may have can be removed.
-	  Next, you need to mount the devpts filesystem on /dev/pts using:
+	Any /dev/ttyp[0-9]* files you may have can be removed.
+	Next, you need to mount the devpts filesystem on /dev/pts using:
 
 		  mount -t devpts devpts /dev/pts
 
-	  You need to be sure that busybox has LOGIN and
-	  FEATURE_SUID enabled. And finally, you should make
-	  certain that Busybox has been installed setuid root:
+	You need to be sure that busybox has LOGIN and
+	FEATURE_SUID enabled. And finally, you should make
+	certain that Busybox has been installed setuid root:
 
 		chown root.root /bin/busybox
 		chmod 4755 /bin/busybox
 
-	  with all that done, telnetd _should_ work....
+	with all that done, telnetd _should_ work....
 
 config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
 	bool "Support standalone telnetd (not inetd only)"
 	default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
 	depends on BUSYBOX_CONFIG_TELNETD
 	help
-	  Selecting this will make telnetd able to run standalone.
+	Selecting this will make telnetd able to run standalone.
 
 config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
 	bool "Support -w SEC option (inetd wait mode)"
 	default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
 	depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
 	help
-	  This option allows you to run telnetd in "inet wait" mode.
-	  Example inetd.conf line (note "wait", not usual "nowait"):
+	This option allows you to run telnetd in "inet wait" mode.
+	Example inetd.conf line (note "wait", not usual "nowait"):
 
-	  telnet stream tcp wait root /bin/telnetd telnetd -w10
+	telnet stream tcp wait root /bin/telnetd telnetd -w10
 
-	  In this example, inetd passes _listening_ socket_ as fd 0
-	  to telnetd when connection appears.
-	  telnetd will wait for connections until all existing
-	  connections are closed, and no new connections
-	  appear during 10 seconds. Then it exits, and inetd continues
-	  to listen for new connections.
+	In this example, inetd passes _listening_ socket_ as fd 0
+	to telnetd when connection appears.
+	telnetd will wait for connections until all existing
+	connections are closed, and no new connections
+	appear during 10 seconds. Then it exits, and inetd continues
+	to listen for new connections.
 
-	  This option is rarely used. "tcp nowait" is much more usual
-	  way of running tcp services, including telnetd.
-	  You most probably want to say N here.
+	This option is rarely used. "tcp nowait" is much more usual
+	way of running tcp services, including telnetd.
+	You most probably want to say N here.
 config BUSYBOX_CONFIG_TFTP
 	bool "tftp"
 	default BUSYBOX_DEFAULT_TFTP
 	help
-	  This enables the Trivial File Transfer Protocol client program. TFTP
-	  is usually used for simple, small transfers such as a root image
-	  for a network-enabled bootloader.
+	This enables the Trivial File Transfer Protocol client program. TFTP
+	is usually used for simple, small transfers such as a root image
+	for a network-enabled bootloader.
 
 config BUSYBOX_CONFIG_TFTPD
 	bool "tftpd"
 	default BUSYBOX_DEFAULT_TFTPD
 	help
-	  This enables the Trivial File Transfer Protocol server program.
-	  It expects that stdin is a datagram socket and a packet
-	  is already pending on it. It will exit after one transfer.
-	  In other words: it should be run from inetd in nowait mode,
-	  or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+	This enables the Trivial File Transfer Protocol server program.
+	It expects that stdin is a datagram socket and a packet
+	is already pending on it. It will exit after one transfer.
+	In other words: it should be run from inetd in nowait mode,
+	or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
 
 comment "Common options for tftp/tftpd"
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
@@ -912,29 +912,29 @@ config BUSYBOX_CONFIG_FEATURE_TFTP_GET
 	default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Add support for the GET command within the TFTP client. This allows
-	  a client to retrieve a file from a TFTP server.
-	  Also enable upload support in tftpd, if tftpd is selected.
+	Add support for the GET command within the TFTP client. This allows
+	a client to retrieve a file from a TFTP server.
+	Also enable upload support in tftpd, if tftpd is selected.
 
-	  Note: this option does _not_ make tftpd capable of download
-	  (the usual operation people need from it)!
+	Note: this option does _not_ make tftpd capable of download
+	(the usual operation people need from it)!
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
 	bool "Enable 'tftp put' and/or tftpd download code"
 	default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Add support for the PUT command within the TFTP client. This allows
-	  a client to transfer a file to a TFTP server.
-	  Also enable download support in tftpd, if tftpd is selected.
+	Add support for the PUT command within the TFTP client. This allows
+	a client to transfer a file to a TFTP server.
+	Also enable download support in tftpd, if tftpd is selected.
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
 	bool "Enable 'blksize' and 'tsize' protocol options"
 	default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Allow tftp to specify block size, and tftpd to understand
-	  "blksize" and "tsize" options.
+	Allow tftp to specify block size, and tftpd to understand
+	"blksize" and "tsize" options.
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
 	bool "Enable progress bar"
@@ -946,8 +946,8 @@ config BUSYBOX_CONFIG_TFTP_DEBUG
 	default BUSYBOX_DEFAULT_TFTP_DEBUG
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Make tftp[d] print debugging messages on stderr.
-	  This is useful if you are diagnosing a bug in tftp[d].
+	Make tftp[d] print debugging messages on stderr.
+	This is useful if you are diagnosing a bug in tftp[d].
 config BUSYBOX_CONFIG_TLS
 	bool #No description makes it a hidden option
 	default BUSYBOX_DEFAULT_TLS
@@ -956,22 +956,22 @@ config BUSYBOX_CONFIG_TRACEROUTE
 	default BUSYBOX_DEFAULT_TRACEROUTE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Utility to trace the route of IP packets.
+	Utility to trace the route of IP packets.
 
 config BUSYBOX_CONFIG_TRACEROUTE6
 	bool "traceroute6"
 	default BUSYBOX_DEFAULT_TRACEROUTE6
 	depends on BUSYBOX_CONFIG_FEATURE_IPV6
 	help
-	  Utility to trace the route of IPv6 packets.
+	Utility to trace the route of IPv6 packets.
 
 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
 	bool "Enable verbose output"
 	default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
 	depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6
 	help
-	  Add some verbosity to traceroute. This includes among other things
-	  hostnames and ICMP response types.
+	Add some verbosity to traceroute. This includes among other things
+	hostnames and ICMP response types.
 
 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
 	bool "Enable -I option (use ICMP instead of UDP)"
@@ -982,27 +982,27 @@ config BUSYBOX_CONFIG_TUNCTL
 	default BUSYBOX_DEFAULT_TUNCTL
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  tunctl creates or deletes tun devices.
+	tunctl creates or deletes tun devices.
 
 config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
 	bool "Support owner:group assignment"
 	default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
 	depends on BUSYBOX_CONFIG_TUNCTL
 	help
-	  Allow to specify owner and group of newly created interface.
-	  340 bytes of pure bloat. Say no here.
+	Allow to specify owner and group of newly created interface.
+	340 bytes of pure bloat. Say no here.
 config BUSYBOX_CONFIG_VCONFIG
 	bool "vconfig"
 	default BUSYBOX_DEFAULT_VCONFIG
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  Creates, removes, and configures VLAN interfaces
+	Creates, removes, and configures VLAN interfaces
 config BUSYBOX_CONFIG_WGET
 	bool "wget"
 	default BUSYBOX_DEFAULT_WGET
 	help
-	  wget is a utility for non-interactive download of files from HTTP
-	  and FTP servers.
+	wget is a utility for non-interactive download of files from HTTP
+	and FTP servers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
 	bool "Enable long options"
@@ -1019,21 +1019,21 @@ config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
 	default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
 	depends on BUSYBOX_CONFIG_WGET
 	help
-	  Support authenticated HTTP transfers.
+	Support authenticated HTTP transfers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
 	bool "Enable timeout option -T SEC"
 	default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
 	depends on BUSYBOX_CONFIG_WGET
 	help
-	  Supports network read and connect timeouts for wget,
-	  so that wget will give up and timeout, through the -T
-	  command line option.
+	Supports network read and connect timeouts for wget,
+	so that wget will give up and timeout, through the -T
+	command line option.
 
-	  Currently only connect and network data read timeout are
-	  supported (i.e., timeout is not applied to the DNS query). When
-	  FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
-	  will work in addition to -T.
+	Currently only connect and network data read timeout are
+	supported (i.e., timeout is not applied to the DNS query). When
+	FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+	will work in addition to -T.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS
 	bool "Support HTTPS using internal TLS code"
@@ -1041,85 +1041,85 @@ config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS
 	depends on BUSYBOX_CONFIG_WGET
 	select BUSYBOX_CONFIG_TLS
 	help
-	  wget will use internal TLS code to connect to https:// URLs.
-	  Note:
-	  On NOMMU machines, ssl_helper applet should be available
-	  in the $PATH for this to work. Make sure to select that applet.
-
-	  Note: currently, TLS code only makes TLS I/O work, it
-	  does *not* check that the peer is who it claims to be, etc.
-	  IOW: it uses peer-supplied public keys to establish encryption
-	  and signing keys, then encrypts and signs outgoing data and
-	  decrypts incoming data.
-	  It does not check signature hashes on the incoming data:
-	  this means that attackers manipulating TCP packets can
-	  send altered data and we unknowingly receive garbage.
-	  (This check might be relatively easy to add).
-	  It does not check public key's certificate:
-	  this means that the peer may be an attacker impersonating
-	  the server we think we are talking to.
-
-	  If you think this is unacceptable, consider this. As more and more
-	  servers switch to HTTPS-only operation, without such "crippled"
-	  TLS code it is *impossible* to simply download a kernel source
-	  from kernel.org. Which can in real world translate into
-	  "my small automatic tooling to build cross-compilers from sources
-	  no longer works, I need to additionally keep a local copy
-	  of ~4 megabyte source tarball of a SSL library and ~2 megabyte
-	  source of wget, need to compile and built both before I can
-	  download anything. All this despite the fact that the build
-	  is done in a QEMU sandbox on a machine with absolutely nothing
-	  worth stealing, so I don't care if someone would go to a lot
-	  of trouble to intercept my HTTPS download to send me an altered
-	  kernel tarball".
-
-	  If you still think this is unacceptable, send patches.
-
-	  If you still think this is unacceptable, do not want to send
-	  patches, but do want to waste bandwidth expaining how wrong
-	  it is, you will be ignored.
+	wget will use internal TLS code to connect to https:// URLs.
+	Note:
+	On NOMMU machines, ssl_helper applet should be available
+	in the $PATH for this to work. Make sure to select that applet.
+
+	Note: currently, TLS code only makes TLS I/O work, it
+	does *not* check that the peer is who it claims to be, etc.
+	IOW: it uses peer-supplied public keys to establish encryption
+	and signing keys, then encrypts and signs outgoing data and
+	decrypts incoming data.
+	It does not check signature hashes on the incoming data:
+	this means that attackers manipulating TCP packets can
+	send altered data and we unknowingly receive garbage.
+	(This check might be relatively easy to add).
+	It does not check public key's certificate:
+	this means that the peer may be an attacker impersonating
+	the server we think we are talking to.
+
+	If you think this is unacceptable, consider this. As more and more
+	servers switch to HTTPS-only operation, without such "crippled"
+	TLS code it is *impossible* to simply download a kernel source
+	from kernel.org. Which can in real world translate into
+	"my small automatic tooling to build cross-compilers from sources
+	no longer works, I need to additionally keep a local copy
+	of ~4 megabyte source tarball of a SSL library and ~2 megabyte
+	source of wget, need to compile and built both before I can
+	download anything. All this despite the fact that the build
+	is done in a QEMU sandbox on a machine with absolutely nothing
+	worth stealing, so I don't care if someone would go to a lot
+	of trouble to intercept my HTTPS download to send me an altered
+	kernel tarball".
+
+	If you still think this is unacceptable, send patches.
+
+	If you still think this is unacceptable, do not want to send
+	patches, but do want to waste bandwidth expaining how wrong
+	it is, you will be ignored.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
 	bool "Try to connect to HTTPS using openssl"
 	default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
 	depends on BUSYBOX_CONFIG_WGET
 	help
-	  Try to use openssl to handle HTTPS.
-
-	  OpenSSL has a simple SSL client for debug purposes.
-	  If you select this option, wget will effectively run:
-	  "openssl s_client -quiet -connect hostname:443
-	  -servername hostname 2>/dev/null" and pipe its data
-	  through it. -servername is not used if hostname is numeric.
-	  Note inconvenient API: host resolution is done twice,
-	  and there is no guarantee openssl's idea of IPv6 address
-	  format is the same as ours.
-	  Another problem is that s_client prints debug information
-	  to stderr, and it needs to be suppressed. This means
-	  all error messages get suppressed too.
-	  openssl is also a big binary, often dynamically linked
-	  against ~15 libraries.
-
-	  If openssl can't be executed, internal TLS code will be used
-	  (if you enabled it); if openssl can be executed but fails later,
-	  wget can't detect this, and download will fail.
+	Try to use openssl to handle HTTPS.
+
+	OpenSSL has a simple SSL client for debug purposes.
+	If you select this option, wget will effectively run:
+	"openssl s_client -quiet -connect hostname:443
+	-servername hostname 2>/dev/null" and pipe its data
+	through it. -servername is not used if hostname is numeric.
+	Note inconvenient API: host resolution is done twice,
+	and there is no guarantee openssl's idea of IPv6 address
+	format is the same as ours.
+	Another problem is that s_client prints debug information
+	to stderr, and it needs to be suppressed. This means
+	all error messages get suppressed too.
+	openssl is also a big binary, often dynamically linked
+	against ~15 libraries.
+
+	If openssl can't be executed, internal TLS code will be used
+	(if you enabled it); if openssl can be executed but fails later,
+	wget can't detect this, and download will fail.
 config BUSYBOX_CONFIG_WHOIS
 	bool "whois"
 	default BUSYBOX_DEFAULT_WHOIS
 	help
-	  whois is a client for the whois directory service
+	whois is a client for the whois directory service
 config BUSYBOX_CONFIG_ZCIP
 	bool "zcip"
 	default BUSYBOX_DEFAULT_ZCIP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
-	  It's a daemon that allocates and defends a dynamically assigned
-	  address on the 169.254/16 network, requiring no system administrator.
+	ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+	It's a daemon that allocates and defends a dynamically assigned
+	address on the 169.254/16 network, requiring no system administrator.
 
-	  See http://www.zeroconf.org for further details, and "zcip.script"
-	  in the busybox examples.
+	See http://www.zeroconf.org for further details, and "zcip.script"
+	in the busybox examples.
 
 source udhcp/Config.in
 
@@ -1128,8 +1128,8 @@ config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
 	default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
 	depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
 	help
-	  Command line options to pass to udhcpc from ifup.
-	  Intended to alter options not available in /etc/network/interfaces.
-	  (IE: --syslog --background etc...)
+	Command line options to pass to udhcpc from ifup.
+	Intended to alter options not available in /etc/network/interfaces.
+	(IE: --syslog --background etc...)
 
 endmenu
diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in
index e7a98750d2..6066ded078 100644
--- a/package/utils/busybox/config/networking/udhcp/Config.in
+++ b/package/utils/busybox/config/networking/udhcp/Config.in
@@ -9,136 +9,136 @@ config BUSYBOX_CONFIG_UDHCPC6
 	default BUSYBOX_DEFAULT_UDHCPC6  # not yet ready
 	depends on BUSYBOX_CONFIG_FEATURE_IPV6
 	help
-	  udhcpc6 is a DHCPv6 client
+	udhcpc6 is a DHCPv6 client
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC3646
 	bool "Support RFC 3646 (DNS server and search list)"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646
 	depends on BUSYBOX_CONFIG_UDHCPC6
 	help
-	  List of DNS servers and domain search list can be requested with
-	  "-O dns" and "-O search". If server gives these values,
-	  they will be set in environment variables "dns" and "search".
+	List of DNS servers and domain search list can be requested with
+	"-O dns" and "-O search". If server gives these values,
+	they will be set in environment variables "dns" and "search".
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4704
 	bool "Support RFC 4704 (Client FQDN)"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704
 	depends on BUSYBOX_CONFIG_UDHCPC6
 	help
-	  You can request FQDN to be given by server using "-O fqdn".
+	You can request FQDN to be given by server using "-O fqdn".
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4833
 	bool "Support RFC 4833 (Timezones)"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833
 	depends on BUSYBOX_CONFIG_UDHCPC6
 	help
-	  You can request POSIX timezone with "-O tz" and timezone name
-	  with "-O timezone".
+	You can request POSIX timezone with "-O tz" and timezone name
+	with "-O timezone".
 
 config BUSYBOX_CONFIG_UDHCPD
 	bool "udhcpd (DHCP server)"
 	default BUSYBOX_DEFAULT_UDHCPD
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  udhcpd is a DHCP server geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
+	udhcpd is a DHCP server geared primarily toward embedded systems,
+	while striving to be fully functional and RFC compliant.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
 	bool "Rewrite the lease file at every new acknowledge"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY
 	depends on BUSYBOX_CONFIG_UDHCPD
 	help
-	  If selected, udhcpd will write a new file with leases every
-	  time a new lease has been accepted, thus eliminating the need
-	  to send SIGUSR1 for the initial writing or updating. Any timed
-	  rewriting remains undisturbed.
+	If selected, udhcpd will write a new file with leases every
+	time a new lease has been accepted, thus eliminating the need
+	to send SIGUSR1 for the initial writing or updating. Any timed
+	rewriting remains undisturbed.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
 	bool "Select IP address based on client MAC"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC
 	depends on BUSYBOX_CONFIG_UDHCPD
 	help
-	  If selected, udhcpd will base its selection of IP address to offer
-	  on the client's hardware address. Otherwise udhcpd uses the next
-	  consecutive free address.
+	If selected, udhcpd will base its selection of IP address to offer
+	on the client's hardware address. Otherwise udhcpd uses the next
+	consecutive free address.
 
-	  This reduces the frequency of IP address changes for clients
-	  which let their lease expire, and makes consecutive DHCPOFFERS
-	  for the same client to (almost always) contain the same
-	  IP address.
+	This reduces the frequency of IP address changes for clients
+	which let their lease expire, and makes consecutive DHCPOFFERS
+	for the same client to (almost always) contain the same
+	IP address.
 
 config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
 	string "Absolute path to lease file"
 	default BUSYBOX_DEFAULT_DHCPD_LEASES_FILE
 	depends on BUSYBOX_CONFIG_UDHCPD
 	help
-	  udhcpd stores addresses in a lease file. This is the absolute path
-	  of the file. Normally it is safe to leave it untouched.
+	udhcpd stores addresses in a lease file. This is the absolute path
+	of the file. Normally it is safe to leave it untouched.
 
 config BUSYBOX_CONFIG_DUMPLEASES
 	bool "dumpleases"
 	default BUSYBOX_DEFAULT_DUMPLEASES
 	help
-	  dumpleases displays the leases written out by the udhcpd.
-	  Lease times are stored in the file by time remaining in lease, or
-	  by the absolute time that it expires in seconds from epoch.
+	dumpleases displays the leases written out by the udhcpd.
+	Lease times are stored in the file by time remaining in lease, or
+	by the absolute time that it expires in seconds from epoch.
 
 config BUSYBOX_CONFIG_DHCPRELAY
 	bool "dhcprelay"
 	default BUSYBOX_DEFAULT_DHCPRELAY
 	help
-	  dhcprelay listens for dhcp requests on one or more interfaces
-	  and forwards these requests to a different interface or dhcp
-	  server.
+	dhcprelay listens for dhcp requests on one or more interfaces
+	and forwards these requests to a different interface or dhcp
+	server.
 
 config BUSYBOX_CONFIG_UDHCPC
 	bool "udhcpc (DHCP client)"
 	default BUSYBOX_DEFAULT_UDHCPC
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	  udhcpc is a DHCP client geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
+	udhcpc is a DHCP client geared primarily toward embedded systems,
+	while striving to be fully functional and RFC compliant.
 
-	  The udhcp client negotiates a lease with the DHCP server and
-	  runs a script when a lease is obtained or lost.
+	The udhcp client negotiates a lease with the DHCP server and
+	runs a script when a lease is obtained or lost.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING
 	bool "Verify that the offered address is free, using ARP ping"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPC_ARPING
 	depends on BUSYBOX_CONFIG_UDHCPC
 	help
-	  If selected, udhcpc will send ARP probes and make sure
-	  the offered address is really not in use by anyone. The client
-	  will DHCPDECLINE the offer if the address is in use,
-	  and restart the discover process.
+	If selected, udhcpc will send ARP probes and make sure
+	the offered address is really not in use by anyone. The client
+	will DHCPDECLINE the offer if the address is in use,
+	and restart the discover process.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCPC_SANITIZEOPT
 	bool "Do not pass malformed host and domain names"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCPC_SANITIZEOPT
 	depends on BUSYBOX_CONFIG_UDHCPC
 	help
-	  If selected, udhcpc will check some options (such as option 12 -
-	  hostname) and if they don't look like valid hostnames
-	  (for example, if they start with dash or contain spaces),
-	  they will be replaced with string "bad" when exporting
-	  to the environment.
+	If selected, udhcpc will check some options (such as option 12 -
+	hostname) and if they don't look like valid hostnames
+	(for example, if they start with dash or contain spaces),
+	they will be replaced with string "bad" when exporting
+	to the environment.
 
 config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
 	string "Absolute path to config script"
 	default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT
 	depends on BUSYBOX_CONFIG_UDHCPC
 	help
-	  This script is called after udhcpc receives an answer. See
-	  examples/udhcp for a working example. Normally it is safe
-	  to leave this untouched.
+	This script is called after udhcpc receives an answer. See
+	examples/udhcp for a working example. Normally it is safe
+	to leave this untouched.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
 	bool "Enable '-P port' option for udhcpd and udhcpc"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT
 	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
 	help
-	  At the cost of ~300 bytes, enables -P port option.
-	  This feature is typically not needed.
+	At the cost of ~300 bytes, enables -P port option.
+	This feature is typically not needed.
 
 config BUSYBOX_CONFIG_UDHCP_DEBUG
 	int "Maximum verbosity level for udhcp applets (0..9)"
@@ -146,28 +146,28 @@ config BUSYBOX_CONFIG_UDHCP_DEBUG
 	range 0 9
 	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
 	help
-	  Verbosity can be increased with multiple -v options.
-	  This option controls how high it can be cranked up.
+	Verbosity can be increased with multiple -v options.
+	This option controls how high it can be cranked up.
 
-	  Bigger values result in bigger code. Levels above 1
-	  are very verbose and useful for debugging only.
+	Bigger values result in bigger code. Levels above 1
+	are very verbose and useful for debugging only.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
 	bool "Support RFC3397 domain search (experimental)"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397
 	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
 	help
-	  If selected, both client and server will support passing of domain
-	  search lists via option 119, specified in RFC 3397,
-	  and SIP servers option 120, specified in RFC 3361.
+	If selected, both client and server will support passing of domain
+	search lists via option 119, specified in RFC 3397,
+	and SIP servers option 120, specified in RFC 3361.
 
 config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
 	bool "Support 802.1Q VLAN parameters"
 	default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q
 	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
 	help
-	  If selected, both client and server will support passing of VLAN
-	  ID and priority via options 132 and 133 as per 802.1Q.
+	If selected, both client and server will support passing of VLAN
+	ID and priority via options 132 and 133 as per 802.1Q.
 
 config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
 	int "DHCP options slack buffer size"
@@ -175,19 +175,19 @@ config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
 	range 0 924
 	depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
 	help
-	  Some buggy DHCP servers send DHCP offer packets with option
-	  field larger than we expect (which might also be considered a
-	  buffer overflow attempt). These packets are normally discarded.
-	  If circumstances beyond your control force you to support such
-	  servers, this may help. The upper limit (924) makes dhcpc accept
-	  even 1500 byte packets (maximum-sized ethernet packets).
+	Some buggy DHCP servers send DHCP offer packets with option
+	field larger than we expect (which might also be considered a
+	buffer overflow attempt). These packets are normally discarded.
+	If circumstances beyond your control force you to support such
+	servers, this may help. The upper limit (924) makes dhcpc accept
+	even 1500 byte packets (maximum-sized ethernet packets).
 
-	  This option does not make dhcp[cd] emit non-standard
-	  sized packets.
+	This option does not make dhcp[cd] emit non-standard
+	sized packets.
 
-	  Known buggy DHCP servers:
-	  3Com OfficeConnect Remote 812 ADSL Router:
+	Known buggy DHCP servers:
+	3Com OfficeConnect Remote 812 ADSL Router:
 	    seems to confuse maximum allowed UDP packet size with
 	    maximum size of entire IP packet, and sends packets which are
 	    28 bytes too large.
-	  Seednet (ISP) VDSL: sends packets 2 bytes too large.
+	Seednet (ISP) VDSL: sends packets 2 bytes too large.