move boot related packages to their own folder

SVN-Revision: 33781

5 files changed, 0 insertions, 512 deletions

diff --git a/package/uboot-kirkwood/files/board/iomega/iconnect/Makefile b/package/uboot-kirkwood/files/board/iomega/iconnect/Makefile
deleted file mode 100644
index f77fcfb990..0000000000
--- a/package/uboot-kirkwood/files/board/iomega/iconnect/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= iconnect.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c
deleted file mode 100644
index 34ddadf8a7..0000000000
--- a/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 2009-2012
- * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/arch/mpp.h>
-#include "iconnect.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/*
-	 * default gpio configuration
-	 * There are maximum 64 gpios controlled through 2 sets of registers
-	 * the below configuration configures mainly initial LED status
-	 */
-	kw_config_gpio(ICONNECT_OE_VAL_LOW,
-			ICONNECT_OE_VAL_HIGH,
-			ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
-
-	/* Multi-Purpose Pins Functionality configuration */
-	u32 kwmpp_config[] = {
-		MPP0_NF_IO2,
-		MPP1_NF_IO3,
-		MPP2_NF_IO4,
-		MPP3_NF_IO5,
-		MPP4_NF_IO6,
-		MPP5_NF_IO7,
-		MPP6_SYSRST_OUTn,
-		MPP7_GPO,
-		MPP8_TW_SDA,
-		MPP9_TW_SCK,
-		MPP10_UART0_TXD,
-		MPP11_UART0_RXD,
-		MPP12_GPO,
-		MPP13_SD_CMD,
-		MPP14_SD_D0,
-		MPP15_SD_D1,
-		MPP16_SD_D2,
-		MPP17_SD_D3,
-		MPP18_NF_IO0,
-		MPP19_NF_IO1,
-		MPP20_GE1_0,
-		MPP21_GE1_1,
-		MPP22_GE1_2,
-		MPP23_GE1_3,
-		MPP24_GE1_4,
-		MPP25_GE1_5,
-		MPP26_GE1_6,
-		MPP27_GE1_7,
-		MPP28_GPIO,
-		MPP29_GPIO,
-		MPP30_GE1_10,
-		MPP31_GE1_11,
-		MPP32_GE1_12,
-		MPP33_GE1_13,
-		MPP34_GE1_14,
-		MPP35_GPIO,
-		MPP36_AUDIO_SPDIFI,
-		MPP37_AUDIO_SPDIFO,
-		MPP38_GPIO,
-		MPP39_TDM_SPI_CS0,
-		MPP40_TDM_SPI_SCK,
-		MPP41_GPIO,
-		MPP42_GPIO,
-		MPP43_GPIO,
-		MPP44_GPIO,
-		MPP45_GPIO,
-		MPP46_GPIO,
-		MPP47_GPIO,
-		MPP48_GPIO,
-		MPP49_GPIO,
-		0
-	};
-	kirkwood_mpp_conf(kwmpp_config);
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Boot parameters address */
-	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and initialize PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	u16 devadr;
-	char *name = "egiga0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	/* command to read PHY dev address */
-	if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
-		printf("Err..(%s) could not read PHY dev address\n", __func__);
-		return;
-	}
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, devadr);
-
-	debug("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h b/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h
deleted file mode 100644
index 2fb3e5ed8f..0000000000
--- a/package/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009-2012
- * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __ICONNECT_H
-#define __ICONNECT_H
-
-#define ICONNECT_OE_LOW			(~(1 << 7))
-#define ICONNECT_OE_HIGH		(~(1 << 10))
-#define ICONNECT_OE_VAL_LOW		(0)
-#define ICONNECT_OE_VAL_HIGH		(1 << 10)
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG		10
-#define MV88E1116_CPRSP_CR3_REG		21
-#define MV88E1116_MAC_CTRL_REG		21
-#define MV88E1116_PGADR_REG		22
-#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
-
-#endif /* __ICONNECT_H */
diff --git a/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg b/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg
deleted file mode 100644
index dee546a524..0000000000
--- a/package/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg
+++ /dev/null
@@ -1,165 +0,0 @@
-#
-# (C) Copyright 2009-2012
-# Wojciech Dubowik <wojciech.dubowik@neratec.com>
-# Luka Perkov <uboot@lukaperkov.net>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-# Refer docs/README.kwimage for more details about how-to configure
-# and create kirkwood boot image
-#
-
-# Boot Media configurations
-BOOT_FROM	nand
-NAND_ECC_MODE	default
-NAND_PAGE_SIZE	0x0800
-
-# SOC registers configuration using bootrom header extension
-# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
-
-# Configure RGMII-0 interface pad voltage to 1.8V
-DATA 0xffd100e0 0x1b1b1b9b
-
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-DATA 0xffd01400 0x43000c30	# DDR Configuration register
-# bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
-# bit23-14: 0x0,
-# bit24:    0x1,   enable exit self refresh mode on DDR access
-# bit25:    0x1,   required
-# bit29-26: 0x0,
-# bit31-30: 0x1,
-
-DATA 0xffd01404 0x37543000	# DDR Controller Control Low
-# bit4:     0x0, addr/cmd in smame cycle
-# bit5:     0x0, clk is driven during self refresh, we don't care for APX
-# bit6:     0x0, use recommended falling edge of clk for addr/cmd
-# bit14:    0x0, input buffer always powered up
-# bit18:    0x1, cpu lock transaction enabled
-# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
-# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
-# bit30-28: 0x3, required
-# bit31:    0x0, no additional STARTBURST delay
-
-DATA 0xffd01408 0x22125451	# DDR Timing (Low) (active cycles value +1)
-# bit3-0:   TRAS lsbs
-# bit7-4:   TRCD
-# bit11-8:  TRP
-# bit15-12: TWR
-# bit19-16: TWTR
-# bit20:    TRAS msb
-# bit23-21: 0x0
-# bit27-24: TRRD
-# bit31-28: TRTP
-
-DATA 0xffd0140c 0x00000a33	# DDR Timing (High)
-# bit6-0:   TRFC
-# bit8-7:   TR2R
-# bit10-9:  TR2W
-# bit12-11: TW2W
-# bit31-13: 0x0, required
-
-DATA 0xffd01410 0x000000cc	# DDR Address Control
-# bit1-0:   00,  Cs0width (x8)
-# bit3-2:   11,  Cs0size (1Gb)
-# bit5-4:   00,  Cs1width (x8)
-# bit7-6:   11,  Cs1size (1Gb)
-# bit9-8:   00,  Cs2width (nonexistent)
-# bit11-10: 00,  Cs2size (nonexistent)
-# bit13-12: 00,  Cs3width (nonexistent)
-# bit15-14: 00,  Cs3size (nonexistent)
-# bit16:    0,   Cs0AddrSel
-# bit17:    0,   Cs1AddrSel
-# bit18:    0,   Cs2AddrSel
-# bit19:    0,   Cs3AddrSel
-# bit31-20: 0x0, required
-
-DATA 0xffd01414 0x00000000	# DDR Open Pages Control
-# bit0:    0,   OpenPage enabled
-# bit31-1: 0x0, required
-
-DATA 0xffd01418 0x00000000	# DDR Operation
-# bit3-0:   0x0, DDR cmd
-# bit31-4:  0x0, required
-
-DATA 0xffd0141c 0x00000c52	# DDR Mode
-# bit2-0:   0x2, BurstLen=2 required
-# bit3:     0x0, BurstType=0 required
-# bit6-4:   0x4, CL=5
-# bit7:     0x0, TestMode=0 normal
-# bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
-# bit12:    0x0, PD must be zero
-# bit31-13: 0x0, required
-
-DATA 0xffd01420 0x00000040	# DDR Extended Mode
-# bit0:     0,   DDR DLL enabled
-# bit1:     0,   DDR drive strenght normal
-# bit2:     0,   DDR ODT control lsd (disabled)
-# bit5-3:   0x0, required
-# bit6:     1,   DDR ODT control msb, (disabled)
-# bit9-7:   0x0, required
-# bit10:    0,   differential DQS enabled
-# bit11:    0,   required
-# bit12:    0,   DDR output buffer enabled
-# bit31-13: 0x0, required
-
-DATA 0xffd01424 0x0000f17f	# DDR Controller Control High
-# bit2-0:   0x7, required
-# bit3:     0x1, MBUS Burst Chop disabled
-# bit6-4:   0x7, required
-# bit7:     0x0,
-# bit8:     0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
-# bit9:     0x0, no half clock cycle addition to dataout
-# bit10:    0x0, 1/4 clock cycle skew enabled for addr/ctl signals
-# bit11:    0x0, 1/4 clock cycle skew disabled for write mesh
-# bit15-12: 0xf, required
-# bit31-16: 0x0, required
-
-DATA 0xffd01428 0x00085520	# DDR2 ODT Read Timing (default values)
-DATA 0xffd0147c 0x00008552	# DDR2 ODT Write Timing (default values)
-
-DATA 0xffd01500 0x00000000	# CS[0]n Base address to 0x0
-DATA 0xffd01504 0x0ffffff1	# CS[0]n Size
-# bit0:     0x1,     Window enabled
-# bit1:     0x0,     Write Protect disabled
-# bit3-2:   0x0,     CS0 hit selected
-# bit23-4:  0xfffff, required
-# bit31-24: 0x0f,    Size (i.e. 256MB)
-
-DATA 0xffd01508 0x00000000	# CS[1]n Base address to 256Mb
-DATA 0xffd0150c 0x00000000	# CS[1]n Size 256Mb Window enabled for CS1
-
-DATA 0xffd01514 0x00000000	# CS[2]n Size, window disabled
-DATA 0xffd0151c 0x00000000	# CS[3]n Size, window disabled
-
-DATA 0xffd01494 0x00030000	# DDR ODT Control (Low)
-# bit3-0:     ODT0Rd, MODT[0] asserted during read from DRAM CS1
-# bit7-4:     ODT0Rd, MODT[0] asserted during read from DRAM CS0
-# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
-# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
-
-DATA 0xffd01498 0x00000000	# DDR ODT Control (High)
-# bit1-0:  0x0, ODT0 controlled by ODT Control (low) register above
-# bit3-2:  0x1, ODT1 active NEVER!
-# bit31-4: 0x0, required
-
-DATA 0xffd0149c 0x0000e803	# CPU ODT Control
-DATA 0xffd01480 0x00000001	# DDR Initialization Control
-# bit0: 0x1, enable DDR init upon this register write
-
-# End of Header extension
-DATA 0x0 0x0
diff --git a/package/uboot-kirkwood/files/include/configs/iconnect.h b/package/uboot-kirkwood/files/include/configs/iconnect.h
deleted file mode 100644
index 59432f14dd..0000000000
--- a/package/uboot-kirkwood/files/include/configs/iconnect.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2009-2012
- * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _CONFIG_ICONNECT_H
-#define _CONFIG_ICONNECT_H
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING	" Iomega iConnect Wireless"
-
-/*
- * High level configuration options
- */
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-#define CONFIG_KIRKWOOD			/* SOC Family Name */
-#define CONFIG_KW88F6281		/* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-
-/*
- * Machine type
- */
-#define CONFIG_MACH_TYPE	MACH_TYPE_ICONNECT
-
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH		/* declare no flash (NOR/SPI) */
-#define CONFIG_SYS_MVFS
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-#undef CONFIG_SYS_PROMPT
-#define CONFIG_SYS_PROMPT	"iconnect => "
-
-/*
- * Environment variables configuration
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-#define CONFIG_ENV_SIZE			0x20000
-#define CONFIG_ENV_OFFSET		0xc0000
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTCOMMAND	"${x_bootcmd_kernel}; "		\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"${x_bootcmd_usb}; bootm 0x6400000;"
-
-#define CONFIG_MTDPARTS		"orion_nand:1M(u-boot),"	\
-	"3M@1M(kernel),32M@4M(rootfs),475M@36M(data)\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"	\
-	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS		\
-	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
-	"x_bootcmd_usb=usb start\0" \
-	"x_bootargs_root=root=/dev/mtdblock2 rw rootfstype=jffs2\0"
-
-/*
- * Ethernet driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	11
-#endif /* CONFIG_CMD_NET */
-
-/*
- * SATA driver configuration
- */
-#ifdef CONFIG_CMD_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
-#endif /* CONFIG_CMD_IDE */
-
-/*
- * File system
- */
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-
-#endif /* _CONFIG_ICONNECT_H */