packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

37 files changed, 0 insertions, 4781 deletions

diff --git a/package/system/utils/e2fsprogs/Makefile b/package/system/utils/e2fsprogs/Makefile
deleted file mode 100644
index ebc21c9067..0000000000
--- a/package/system/utils/e2fsprogs/Makefile
+++ /dev/null
@@ -1,169 +0,0 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-# Copyright 2010 Vertical Communications
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=e2fsprogs
-PKG_VERSION:=1.42.4
-PKG_MD5SUM:=b6e296f210d642361b7394437ff0f318
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=@SF/e2fsprogs
-
-PKG_BUILD_DEPENDS:=util-linux
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/e2fsprogs/Default
-  URL:=http://e2fsprogs.sourceforge.net/
-  SUBMENU:=Filesystem
-endef
-
-define Package/e2fsprogs
-$(call Package/e2fsprogs/Default)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Ext2/3/4 filesystem utilities
-  DEPENDS:=+libblkid +libuuid +libext2fs
-endef
-
-define Package/e2fsprogs/description
- This package contains essential ext2 filesystem utilities which consists of
- e2fsck, mke2fs, tune2fs, and most of the other core ext2
- filesystem utilities.
-endef
-
-define Package/libext2fs
-$(call Package/e2fsprogs/Default)
-  DEPENDS:=+libcom_err
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=ext2/3/4 filesystem library
-endef
-
-define Package/libext2fs/description
- libext2fs is a library which can access ext2, ext3 and ext4 filesystems.
-endef
-
-define Package/libcom_err
-$(call Package/e2fsprogs/Default)
-  DEPENDS:=+libpthread
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Common error description library
-endef
-
-define Package/libcom_err/description
- libcom_err is a library providing common error descriptions
-endef
-
-define Package/tune2fs
-$(call Package/e2fsprogs)
-  TITLE:=Ext2 Filesystem tune utility
-  DEPENDS:= +e2fsprogs
-endef
-
-define Package/resize2fs
-$(call Package/e2fsprogs)
-  TITLE:=Ext2 Filesystem resize utility
-  DEPENDS:= +e2fsprogs
-endef
-
-define Package/badblocks
-$(call Package/e2fsprogs)
-  TITLE:=Ext2 Filesystem badblocks utility
-  DEPENDS:= +e2fsprogs
-endef
-
-TARGET_CFLAGS += $(FPIC)
-
-CONFIGURE_ARGS += \
-	--enable-elf-shlibs	\
-	--disable-libuuid	\
-	--disable-libblkid	\
-	--disable-uuidd		\
-	--disable-tls		\
-	--disable-nls		\
-	--disable-rpath
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-	$(CP) $(SCRIPT_DIR)/config.{guess,sub} $(PKG_BUILD_DIR)/config/
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/util \
-		BUILDCC="$(HOSTCC)" \
-		CFLAGS="" \
-		CPPFLAGS="" \
-		LDFLAGS="" \
-		subst
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		BUILDCC="$(HOSTCC)" \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		all
-endef
-
-define Build/InstallDev
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		BUILDCC="$(HOSTCC)" \
-		DESTDIR="$(1)" \
-		install-libs
-	$(MAKE) -C $(PKG_BUILD_DIR)/lib/ext2fs \
-		BUILDCC="$(HOSTCC)" \
-		DESTDIR="$(1)" \
-		install
-endef
-
-define Package/e2fsprogs/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/e2fsck $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/mke2fs $(1)/usr/sbin/
-	ln -sf mke2fs $(1)/usr/sbin/mkfs.ext2
-	ln -sf mke2fs $(1)/usr/sbin/mkfs.ext3
-	ln -sf mke2fs $(1)/usr/sbin/mkfs.ext4
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libe2p.so.* $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/functions/fsck
-	$(INSTALL_DATA) ./files/e2fsck.sh $(1)/lib/functions/fsck/
-	$(INSTALL_DATA) ./files/e2fsck.conf $(1)/etc/e2fsck.conf
-endef
-
-define Package/libcom_err/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcom_err.so.* $(1)/usr/lib/
-endef
-
-define Package/libext2fs/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libext2fs.so.* $(1)/usr/lib/
-endef
-
-define Package/tune2fs/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/tune2fs $(1)/usr/sbin/
-endef
-
-define Package/resize2fs/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/resize2fs $(1)/usr/sbin/
-endef
-
-define Package/badblocks/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/badblocks $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,e2fsprogs))
-$(eval $(call BuildPackage,libext2fs))
-$(eval $(call BuildPackage,libcom_err))
-$(eval $(call BuildPackage,tune2fs))
-$(eval $(call BuildPackage,resize2fs))
-$(eval $(call BuildPackage,badblocks))
diff --git a/package/system/utils/e2fsprogs/files/e2fsck.conf b/package/system/utils/e2fsprogs/files/e2fsck.conf
deleted file mode 100644
index 9c96b49585..0000000000
--- a/package/system/utils/e2fsprogs/files/e2fsck.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-[options]
-broken_system_clock = true
-
diff --git a/package/system/utils/e2fsprogs/files/e2fsck.sh b/package/system/utils/e2fsprogs/files/e2fsck.sh
deleted file mode 100644
index 22031edb67..0000000000
--- a/package/system/utils/e2fsprogs/files/e2fsck.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Copyright 2010 Vertical Communications
-# Copyright 2012 OpenWrt.org
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-fsck_e2fsck() {
-	set -o pipefail
-	e2fsck -p "$device" 2>&1 | logger -t "fstab: e2fsck ($device)"
-	local status="$?"
-	set +o pipefail
-	case "$status" in
-		0|1) ;; #success
-		2) reboot;;
-		4) echo "e2fsck ($device): Warning! Uncorrected errors."| logger -t fstab
-			return 1
-			;;
-		*) echo "e2fsck ($device): Error $status. Check not complete."| logger -t fstab;;
-	esac
-	return 0
-}
-
-fsck_ext2() {
-	fsck_e2fsck "$@"
-}
-
-fsck_ext3() {
-	fsck_e2fsck "$@"
-}
-
-fsck_ext4() {
-	fsck_e2fsck "$@"
-}
-
-append libmount_known_fsck "ext2"
-append libmount_known_fsck "ext3"
-append libmount_known_fsck "ext4"
diff --git a/package/system/utils/e2fsprogs/patches/001-link-against-libuuid.patch b/package/system/utils/e2fsprogs/patches/001-link-against-libuuid.patch
deleted file mode 100644
index e0564dc355..0000000000
--- a/package/system/utils/e2fsprogs/patches/001-link-against-libuuid.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/configure
-+++ b/configure
-@@ -5038,7 +5038,7 @@ if test "${ac_cv_lib_blkid_blkid_get_cac
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
--LIBS="-lblkid $LIBBLKID $LIBS"
-+LIBS="-lblkid $LIBBLKID $LIBUUID $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
---- a/misc/Makefile.in
-+++ b/misc/Makefile.in
-@@ -146,10 +146,10 @@ partinfo: partinfo.o
- 	$(E) "	LD $@"
- 	$(Q) $(CC) $(ALL_LDFLAGS) -o partinfo partinfo.o
- 
--e2initrd_helper: e2initrd_helper.o $(DEPLIBS) $(DEPLIBBLKID) $(LIBEXT2FS)
-+e2initrd_helper: e2initrd_helper.o $(DEPLIBS) $(DEPLIBBLKID) $(DEPLIBUUID) $(LIBEXT2FS)
- 	$(E) "	LD $@"
- 	$(Q) $(CC) $(ALL_LDFLAGS) -o e2initrd_helper e2initrd_helper.o $(LIBS) \
--		$(LIBBLKID) $(LIBEXT2FS) $(LIBINTL)
-+		$(LIBBLKID) $(LIBUUID) $(LIBEXT2FS) $(LIBINTL)
- 
- tune2fs: $(TUNE2FS_OBJS) $(DEPLIBS) $(DEPLIBS_E2P) $(DEPLIBBLKID) \
- 		$(DEPLIBUUID) $(DEPLIBQUOTA) $(LIBEXT2FS)
-@@ -289,9 +289,9 @@ dumpe2fs.profiled: $(PROFILED_DUMPE2FS_O
- 		$(PROFILED_DUMPE2FS_OBJS) $(PROFILED_LIBS) \
- 		$(PROFILED_LIBE2P) $(PROFILED_LIBUUID) $(LIBINTL)
- 
--fsck: $(FSCK_OBJS) $(DEPLIBBLKID)
-+fsck: $(FSCK_OBJS) $(DEPLIBBLKID) $(DEPLIBUUID)
- 	$(E) "	LD $@"
--	$(Q) $(CC) $(ALL_LDFLAGS) -o fsck $(FSCK_OBJS) $(LIBBLKID) $(LIBINTL)
-+	$(Q) $(CC) $(ALL_LDFLAGS) -o fsck $(FSCK_OBJS) $(LIBBLKID) $(LIBUUID) $(LIBINTL)
- 
- fsck.profiled: $(PROFILED_FSCK_OBJS) $(PROFILED_DEPLIBBLKID)
- 	$(E) "	LD $@"
diff --git a/package/system/utils/e2fsprogs/patches/002-no_malloc_h.patch b/package/system/utils/e2fsprogs/patches/002-no_malloc_h.patch
deleted file mode 100644
index 209b47c1cc..0000000000
--- a/package/system/utils/e2fsprogs/patches/002-no_malloc_h.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/util/symlinks.c
-+++ b/util/symlinks.c
-@@ -8,7 +8,6 @@
- #endif
- #include <stdio.h>
- #include <stdlib.h>
--#include <malloc.h>
- #include <string.h>
- #include <fcntl.h>
- #include <sys/param.h>
diff --git a/package/system/utils/fbtest/Makefile b/package/system/utils/fbtest/Makefile
deleted file mode 100644
index 05e67cb63a..0000000000
--- a/package/system/utils/fbtest/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fbtest
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fbtest
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Frame buffer device testing tool
-  DEPENDS:=@DISPLAY_SUPPORT
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS) -Wall" \
-		LDFLAGS="$(TARGET_LDFLAGS)"
-endef
-
-define Package/fbtest/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fbtest $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,fbtest))
diff --git a/package/system/utils/fbtest/src/Makefile b/package/system/utils/fbtest/src/Makefile
deleted file mode 100644
index 075bc0ecbf..0000000000
--- a/package/system/utils/fbtest/src/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-CC = gcc
-CFLAGS = -Wall
-OBJS = fbtest.o
-
-all: fbtest
-
-%.o: %.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-fbtest: $(OBJS)
-	$(CC) -o $@ $(OBJS)
-
-clean:
-	rm -f rbcfg *.o
diff --git a/package/system/utils/fbtest/src/fbtest.c b/package/system/utils/fbtest/src/fbtest.c
deleted file mode 100644
index 6e9c2f85fa..0000000000
--- a/package/system/utils/fbtest/src/fbtest.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/******************************************************************************
- *	fbtest - fbtest.c
- *	test program for the tuxbox-framebuffer device
- *	tests all GTX/eNX supported modes
- *                                                                            
- *	(c) 2003 Carsten Juttner (carjay@gmx.net)
- *
- * 	This program is free software; you can redistribute it and/or modify
- * 	it under the terms of the GNU General Public License as published by
- * 	The Free Software Foundation; either version 2 of the License, or
- * 	(at your option) any later version.
- *
- * 	This program is distributed in the hope that it will be useful,
- * 	but WITHOUT ANY WARRANTY; without even the implied warranty of
- * 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * 	GNU General Public License for more details.
- *
- * 	You should have received a copy of the GNU General Public License
- * 	along with this program; if not, write to the Free Software
- * 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *  									      
- ******************************************************************************
- * $Id: fbtest.c,v 1.5 2005/01/14 23:14:41 carjay Exp $
- ******************************************************************************/
-
-// TODO: - should restore the colour map and mode to what it was before
-//	 - is colour map handled correctly?
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-
-#include <linux/fb.h>
-
-#include <error.h>
-
-#define FBDEV "/dev/fb0"
-
-struct vidsize{
-	int width;
-	int height;
-};
-static
-const struct vidsize vidsizetable[]={	// all supported sizes
-	{720,576},{720,480},{720,288},{720,240},
-	{640,576},{640,480},{640,288},{640,240},
-	{360,576},{360,480},{360,288},{360,240},
-	{320,576},{320,480},{320,288},{320,240}
-};
-#define VIDSIZENUM (sizeof(vidsizetable)/sizeof(struct vidsize))
-
-enum pixenum{	// keep in sync with pixname !
-	CLUT4=0,
-	CLUT8,
-	RGB565,
-	ARGB1555,
-	ARGB
-};
-const char *pixname[] = {
-	"CLUT4",
-	"CLUT8",
-	"RGB565",
-	"ARGB1555",
-	"ARGB"
-};
-
-struct pixelformat{
-	char *name;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-	char bpp;
-	char pixenum;
-};
-
-static		// so far these are all modes supported by the eNX (only partially by GTX)
-const struct pixelformat pixelformattable[] = {
-	{ .name = "CLUT4 ARGB8888", 	// CLUT4 (ARGB8888)
-		.bpp = 4, .pixenum = CLUT4,
-		.red = 	 { .offset = 0, .length=8, .msb_right =0 },
-		.green = { .offset = 0, .length=8, .msb_right =0 },
-		.blue =  { .offset = 0, .length=8, .msb_right =0 },
-		.transp=  { .offset = 0, .length=8, .msb_right =0 }
-	},
-	{ .name = "CLUT4 ARGB1555", 	// CLUT4 (ARGB1555)
-		.bpp = 4, .pixenum = CLUT4,
-		.red = 	 { .offset = 0, .length=5, .msb_right =0 },
-		.green = { .offset = 0, .length=5, .msb_right =0 },
-		.blue =  { .offset = 0, .length=5, .msb_right =0 },
-		.transp=  { .offset = 0, .length=1, .msb_right =0 }
-	},
-	{ .name = "CLUT8 ARGB8888",	// CLUT8 (ARGB8888)
-		.bpp = 8, .pixenum = CLUT8,
-		.red = 	 { .offset = 0, .length=8, .msb_right =0 },
-		.green = { .offset = 0, .length=8, .msb_right =0 },
-		.blue =  { .offset = 0, .length=8, .msb_right =0 },
-		.transp=  { .offset = 0, .length=8, .msb_right =0 }
-	},
-	{ .name = "CLUT8 ARGB1555",	// CLUT8 (ARGB1555)
-		.bpp = 8, .pixenum = CLUT8,
-		.red = 	 { .offset = 0, .length=5, .msb_right =0 },
-		.green = { .offset = 0, .length=5, .msb_right =0 },
-		.blue =  { .offset = 0, .length=5, .msb_right =0 },
-		.transp=  { .offset = 0, .length=1, .msb_right =0 }
-	},
-	{ .name = "ARGB1555", 	// ARGB1555
-		.bpp = 16, .pixenum = ARGB1555,
-		.red = 	 { .offset = 10, .length=5, .msb_right =0 },
-		.green = { .offset = 5,  .length=5, .msb_right =0 },
-		.blue =  { .offset = 0,  .length=5, .msb_right =0 },
-		.transp=  { .offset = 15, .length=1, .msb_right =0 }
-	},
-	{ .name = "RGB565", 		// RGB565
-		.bpp = 16, .pixenum = RGB565,
-		.red = 	 { .offset = 11, .length=5, .msb_right =0 },
-		.green = { .offset = 5,  .length=6, .msb_right =0 },
-		.blue =  { .offset = 0,  .length=5, .msb_right =0 },
-		.transp=  { .offset = 0,  .length=0, .msb_right =0 }
-	},
-	{ .name = "ARGB",	// 32 f*cking bits, the real McCoy :)
-		.bpp = 32, .pixenum = ARGB,
-		.red = 	 { .offset = 16, .length=8, .msb_right =0 },
-		.green = { .offset = 8,  .length=8, .msb_right =0 },
-		.blue =  { .offset = 0,  .length=8, .msb_right =0 },
-		.transp=  { .offset = 24, .length=8, .msb_right =0 }
-	}
-};
-#define PIXELFORMATNUM (sizeof(pixelformattable)/sizeof(struct pixelformat))
-
-struct colour {
-	__u16 r;
-	__u16 g;
-	__u16 b;
-	__u16 a;
-};
-static
-struct colour colourtable[] = {
-	{.r =0xffff, .g = 0xffff, .b=0xffff, .a=0xffff},	// fully transparent white
-	{.r =0xffff, .g = 0x0000, .b=0x0000, .a=0x0000},	// red
-	{.r =0x0000, .g = 0xffff, .b=0x0000, .a=0x0000},	// green
-	{.r =0x0000, .g = 0x0000, .b=0xffff, .a=0x0000},	// blue
-	{.r =0x0000, .g = 0x0000, .b=0x0000, .a=0x0000}		// black
-};
-#define COLOURNUM (sizeof(colourtable)/sizeof(struct colour))
-
-struct rect{
-	int x;
-	int y;
-	int width;
-	int height;
-	const struct colour *col;
-};
-struct pixel{		// up to 32 bits of pixel information
-	char byte[4];
-};
-
-void col2pixel (struct pixel *pix, const struct pixelformat *pixf, const struct colour *col){
-	switch (pixf->pixenum){
-		case RGB565:
-			pix->byte[0]=(col->r&0xf8)|(col->g&0xfc)>>5;
-			pix->byte[1]=(col->g&0xfc)<<3|(col->b&0xf8)>>3;
-			break;
-		case ARGB1555:
-			pix->byte[0]=(col->a&0x80)|(col->r&0xf8)>>1|(col->g&0xf8)>>6;
-			pix->byte[1]=(col->g&0xf8)<<2|(col->b&0xf8)>>3;
-			break;
-		case ARGB:
-			pix->byte[0]=col->a;
-			pix->byte[1]=col->r;
-			pix->byte[2]=col->g;
-			pix->byte[3]=col->b;
-			break;
-		default:
-			printf ("unknown pixelformat\n");
-			exit(1);
-	}
-}
-
-int setmode(int fbd, const struct pixelformat *pixf,const struct vidsize *vids){
-	struct fb_var_screeninfo var;
-	int stat;
-	stat = ioctl (fbd, FBIOGET_VSCREENINFO,&var);
-	if (stat<0) return -2;
-	
-	var.xres= vids->width;
-	var.xres_virtual = vids->width;
-	var.yres= vids->height;
-	var.yres_virtual = vids->height;
-	
-	var.bits_per_pixel = pixf->bpp;
-	var.red = pixf->red;
-	var.green = pixf->green;
-	var.blue = pixf->blue;
-	var.transp = pixf->transp;
-
-	stat = ioctl (fbd, FBIOPUT_VSCREENINFO,&var);
-	if (stat<0) return -1;
-	return 0;
-}
-
-// unefficient implementation, do NOT use it for your next ego shooter, please :)
-// for 4-Bit only rectangles with even width are supported
-// CLUT-modes use value of red component as index
-void drawrect(void *videoram, struct rect *r, const struct pixelformat *pixf, const struct vidsize *vids){
-	int x,y,corwidth, bpp = 0, tocopy = 1;
-	struct pixel pix;
-	unsigned char *pmem = videoram;
-	corwidth = r->width;	// actually only "corrected" for 4 Bit
-
-	if (pixf->pixenum!=CLUT4&&pixf->pixenum!=CLUT8){
-		switch (pixf->pixenum){
-			case ARGB1555:
-			case RGB565:
-				bpp = 16;
-				tocopy = 2;
-				break;
-			case ARGB:
-				bpp = 32;
-				tocopy = 4;
-				break;
-			default:
-				printf ("drawrect: unknown pixelformat(%d) bpp:%d\n",pixf->pixenum,pixf->bpp);
-				exit(1);
-		}
-		col2pixel(&pix,pixf,r->col);
-	} else {
-		switch (pixf->pixenum){	// CLUT = Colour LookUp Table (palette)
-			case CLUT4:	// take red value as index in this case
-				pix.byte[0]=(r->col->r)<<4|(r->col->r&0xf);	// slightly cryptic... "rect->colour->red"
-				corwidth>>=1;	// we copy bytes
-				bpp=4;
-				tocopy=1;
-				break;
-			case CLUT8:
-				pix.byte[0]=(r->col->r&0xff);
-				bpp=8;
-				tocopy=1;
-				break;
-		}
-	}
-	pmem=videoram+((((r->y*vids->width)+r->x)*bpp)>>3);
-	for (y=0;y<r->height;y++){
-		int offset = 0;
-		for (x=0;x<corwidth;x++){
-			memcpy (pmem+offset,pix.byte,tocopy);
-			offset+=tocopy;
-		}
-		pmem +=((vids->width*bpp)>>3);	// skip one whole line, actually should be taken from "fix-info"
-	}
-}
-			
-// create quick little test image, 4 colours from table
-void draw4field(void *videoram, const struct pixelformat *pixf, const struct vidsize *vids){
-	struct rect r;
-	struct colour c;
-	int height, width;
-	c.r = 1;	// only used for the indexed modes, r is taken as index
-	height = vids->height;
-	width = vids->width;
-
-	r.height = height>>1;
-	r.width = width>>1;
-	r.x = 0;	r.y = 0;
-	if (pixf->pixenum==CLUT4||pixf->pixenum==CLUT8) r.col = &c;
-	else r.col = &colourtable[1];
-	drawrect (videoram, &r, pixf, vids);
-
-	r.x = width/2;	r.y = 0;
-	if (pixf->pixenum==CLUT4||pixf->pixenum==CLUT8) c.r = 2;
-	else r.col = &colourtable[2];
-	drawrect (videoram, &r, pixf, vids);
-
-	r.x = 0;	r.y = height/2;
-	if (pixf->pixenum==CLUT4||pixf->pixenum==CLUT8) c.r = 3;
-	else r.col = &colourtable[3];
-	drawrect (videoram, &r, pixf, vids);
-
-	r.x = width/2;	r.y = height/2;
-	if (pixf->pixenum==CLUT4||pixf->pixenum==CLUT8) c.r = 0;
-	else r.col = &colourtable[0];
-	drawrect (videoram, &r, pixf, vids);
-}
-
-void usage(char *name){
- 	printf ("Usage: %s [options]\n"
-		"Options: -f<pixelformat>\n"
-		"            where format is one of:\n"
-		"              CLUT4,CLUT8,ARGB1555,RGB565,ARGB\n"
-		"         -s<width>x<heigth>\n"
-		"            where width is either 720,640,360,320\n"
-		"                  and height is either 288,240,480,576\n"
-		"         -n\n"
-		"            disables clearing the framebuffer after drawing\n"
-		"            the testimage. This can be useful to keep the last\n"
-		"            drawn image onscreen.\n"
-		"\nExample: %s -fRGB322\n",name,name);
-	exit(0);
-}
-
-int main (int argc,char **argv){
-	struct fb_fix_screeninfo fix;
-	struct fb_var_screeninfo var;
-	struct fb_cmap cmap;
-	struct rect r;
-	int fbd;
-	unsigned char *pfb;
-	int stat;
-	int optchar,fmode=-1,smode=-1,clear=1;
-	int i_cmap,i_size,i_pix;
-	extern char *optarg;
-	
-	if (argc!=0&&argc>4) usage(argv[0]);
-	while ( (optchar = getopt (argc,argv,"f:s:n"))!= -1){
-		int i,height,width;
-		switch (optchar){
-			case 'f':
-				for (i=0;i<(sizeof(pixname)/sizeof(char*));i++){
-					if (!strncmp (optarg,pixname[i],strlen(pixname[i]))){
-						fmode=i;
-						printf ("displaying only %s-modes\n",pixname[i]);
-						break;
-					}
-				}
-				if (fmode==-1){
-					printf ("unknown pixelformat\n");
-					exit(0);
-				}
-				break;
-			case 's':
-				if (sscanf (optarg,"%dx%d",&width,&height)!=2){
-					printf ("parsing size failed\n");
-					exit(0);
-				} else {
-					printf ("requested size %dx%d\n",width,height);
-					for (i=0;i<VIDSIZENUM;i++){
-						if (vidsizetable[i].width == width &&
-							vidsizetable[i].height == height){
-							smode = i;
-							break;
-						}
-					}
-					if (smode==-1){
-						printf ("this size is not supported\n");
-						exit(0);
-					}
-				}
-				break;
-			case 'n':
-				clear = 0;
-				printf ("clearing framebuffer after drawing is disabled\n");
-				break;
-			case '?':
-				usage (argv[0]);
-		}
-	}
-	
-	fbd = open (FBDEV, O_RDWR);
-	if (fbd<0){
-		perror ("Error opening framebuffer device");
-		return 1;
-	}
-	stat = ioctl (fbd, FBIOGET_FSCREENINFO,&fix);
-	if (stat<0){
-		perror ("Error getting fix screeninfo");
-		return 1;
-	}
-	stat = ioctl (fbd, FBIOGET_VSCREENINFO,&var);
-	if (stat<0){
-		perror ("Error getting var screeninfo");
-		return 1;
-	}
-	stat = ioctl (fbd, FBIOPUT_VSCREENINFO,&var);
-	if (stat<0){
-		perror ("Error setting mode");
-		return 1;
-	}
-	pfb = mmap (0, fix.smem_len, PROT_READ|PROT_WRITE, MAP_SHARED, fbd, 0);
-	if (pfb == MAP_FAILED){
-		perror ("Error mmap'ing framebuffer device");
-		return 1;
-	}
-
-	// iterate over all modes
-	for (i_pix=0;i_pix<PIXELFORMATNUM;i_pix++){
-		if (fmode!=-1 && pixelformattable[i_pix].pixenum != fmode) continue;
-		printf ("testing: %s",pixelformattable[i_pix].name);
-		printf (" for sizes: \n");
-		for (i_size=0;i_size<VIDSIZENUM;i_size++){
-			if (smode!=-1 && i_size!=smode) continue;
-			printf ("%dx%d ",vidsizetable[i_size].width,vidsizetable[i_size].height);
-			fflush(stdout);
-			if ((i_size%4)==3) printf ("\n");
-			
-			// try to set mode
-			stat = setmode(fbd,&pixelformattable[i_pix],&vidsizetable[i_size]);
-			if (stat==-2) perror ("fbtest: could not get fb_var-screeninfo from fb-device");
-			else if (stat==-1){
-				printf ("\nCould not set mode %s (%dx%d), possible reasons:\n"
-					"- you have a GTX (soz m8)\n"
-					"- your configuration does not have enough graphics RAM\n"
-					"- you found a bug\n"
-					"choose your poison accordingly...\n",
-					pixelformattable[i_pix].name,vidsizetable[i_size].width,vidsizetable[i_size].height);
-					continue;
-			}
-			// fill cmap;
-			cmap.len = 1;
-			if ((pixelformattable[i_pix].bpp==4)||
-				((pixelformattable[i_pix].bpp==8)&&(pixelformattable[i_pix].red.length!=3))){
-				for (i_cmap=0;i_cmap<COLOURNUM;i_cmap++){
-					cmap.start=i_cmap;
-					cmap.red=&colourtable[i_cmap].r;
-					cmap.green=&colourtable[i_cmap].g;
-					cmap.blue=&colourtable[i_cmap].b;
-					cmap.transp=&colourtable[i_cmap].a;
-					stat = ioctl (fbd, FBIOPUTCMAP, &cmap);
-					if (stat<0) printf ("setting colourmap failed\n");
-				}
-			}
-			// create the test image
-			draw4field(pfb,&pixelformattable[i_pix],&vidsizetable[i_size]);
-			usleep (500000);
-			// clear screen
-			if (clear){
-				r.x=r.y=0;r.width = vidsizetable[i_size].width; r.height = vidsizetable[i_size].height;
-				r.col = &colourtable[4];
-				drawrect(pfb,&r,&pixelformattable[i_pix],&vidsizetable[i_size]);
-			}
-		}
-		printf ("\n");
-	}
-
-	stat = munmap (pfb,fix.smem_len);
-	if (stat<0){
-		perror ("Error munmap'ing framebuffer device");
-		return 1;
-	}
-	close (fbd);
-	return 0;
-}
diff --git a/package/system/utils/hostap-utils/Makefile b/package/system/utils/hostap-utils/Makefile
deleted file mode 100644
index 1d7b22122e..0000000000
--- a/package/system/utils/hostap-utils/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostap-utils
-PKG_VERSION:=0.4.7
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
-PKG_MD5SUM:=afe041581b8f01666e353bec20917c85
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/hostap-utils
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=kmod-hostap
-  TITLE:=Host AP driver utility programs
-  URL:=http://hostap.epitest.fi/
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(TARGET_CONFIGURE_OPTS) \
-		CFLAGS="$(TARGET_CFLAGS) $(TARGET_CPPFLAGS) -Wall" \
-		all
-endef
-
-define Package/hostap-utils/install	
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostap_crypt_conf $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostap_diag $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostap_io_debug $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostap_rid $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/prism2_srec $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/split_combined_hex $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,hostap-utils))
diff --git a/package/system/utils/nvram/Makefile b/package/system/utils/nvram/Makefile
deleted file mode 100644
index 81cff034c4..0000000000
--- a/package/system/utils/nvram/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nvram
-PKG_RELEASE:=9
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/nvram
-  SECTION:=utils
-  CATEGORY:=Base system
-  TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
-  MAINTAINER:=Jo-Philipp Wich <xm@subsignal.org>
-  DEPENDS:=@TARGET_brcm47xx||@TARGET_ar71xx
-endef
-
-define Package/nvram/description
- This package contains an utility to manipulate NVRAM on Broadcom based devices.
- It works on bcm47xx (Linux 2.6) without using the kernel api.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS) -Wall" \
-		LDFLAGS="$(TARGET_LDFLAGS)"
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libnvram.so.0.1 $(1)/usr/lib/
-	ln -s libnvram.so.0.1 $(1)/usr/lib/libnvram.so
-endef
-
-define Package/nvram/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libnvram.so.0.1 $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,nvram))
diff --git a/package/system/utils/nvram/files/nvram.init b/package/system/utils/nvram/files/nvram.init
deleted file mode 100755
index 467ab28195..0000000000
--- a/package/system/utils/nvram/files/nvram.init
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh /etc/rc.common
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-START=02
-alias debug=${DEBUG:-:}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-fixup_linksys() {
-	# work around braindead CFE defaults in linksys routers
-	boardtype=$(nvram get boardtype)
-	boardnum=$(nvram get boardnum)
-	boardflags=$(($(nvram get boardflags)))
-	adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-
-	[ -n "$(nvram get vxkilled)" ] && boardtype=0 # don't mess with the ram settings on the hacked cfe
-	case "$(( $boardtype ))" in
-		"1800") #0x708
-			if [ "$adm_switch" = 0 ]; then
-				nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-				[ "$COMMIT" = 1 ] && {
-					nvram_set clkfreq 216
-					nvram_set sdram_ncdl 0x0
-					nvram_set pa0itssit 62
-					nvram_set pa0b0 0x15eb
-					nvram_set pa0b1 0xfa82
-					nvram_set pa0b2 0xfe66
-					nvram_set pa0maxpwr 0x4e
-				}
-			fi
-		;;
-		"1127") #0x467
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x168b
-				nvram_set pa0b1 0xfabf
-				nvram_set pa0b2 0xfeaf
-				nvram_set pa0maxpwr 0x4e
-			}
-		;;
-		"1071") #0x042f
-			# do sanity check first! max 0x0011 = 128mb
-			SDRAM_INIT=$(printf %d $(/usr/sbin/nvram get sdram_init))
-			[ "$SDRAM_INIT" -lt "9" -o "$SDRAM_INIT" -gt "17" ] && {
-				# set this to default: 0x09 only if value is invaild like 16MB on Asus WL-500GP
-				echo "sdram_init is invaild: $(printf 0x%04x $SDRAM_INIT), force to default!"
-				nvram_set sdram_init 0x0009
-			}
-			# on WRT54G3GV2 set flag, so checksum errors of firmware image 2 don't stop the boot process
-			noset_try_flag=$(nvram get noset_try_flag)
-			[ "$noset_try_flag" = 0 ] && {
-				echo "setting noset_try_flag to 1."
-				nvram_set noset_try_flag 1
-			}
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_ncdl 0x0
-			}
-	esac
-}
-
-start() {
-	# Don't do any fixups on the WGT634U
-	[ "$(cat /proc/diag/model)" = "Netgear WGT634U" ] && return
-
-	fixup_linksys
-
-	# OFDM Power Offset is set incorrectly on many boards.
-	# Setting it to 0 will increase the tx power to normal levels.
-	nvram_set opo 0x0
-
-	[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-		# if default wifi mac, set two higher than the lan mac
-		nvram set il0macaddr=$(nvram get et0macaddr|
-		awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-	}
-
-	[ "$(nvram get et0macaddr)" = "00:90:4c:c0:00:08" ] && {
-		# OvisLink WL-1600GL mac workaround
-		nvram set et0macaddr=$(hexdump -n 6 -s 130976 -e '5/1 "%02x:" "%02x" ' /dev/mtd/0)
-		nvram set il0macaddr=$(nvram get et0macaddr|
-		awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-	}
-
-	[ "$COMMIT" = "1" ] && nvram commit
-}
diff --git a/package/system/utils/nvram/src/Makefile b/package/system/utils/nvram/src/Makefile
deleted file mode 100644
index 4872728baf..0000000000
--- a/package/system/utils/nvram/src/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
-CLI_FILENAME = nvram
-
-LIB_VERMAJOR = 0
-LIB_VERMINOR = 1
-LIB_FILENAME = libnvram.so
-
-LIB_CFLAGS  = $(CFLAGS) -shared -fPIC
-LIB_LDFLAGS = $(LDFLAGS) -Wl,-soname,$(LIB_FILENAME).$(LIB_VERMAJOR).$(LIB_VERMINOR)
-
-CLI_CFLAGS  = $(CFLAGS)
-CLI_LDFLAGS = $(LDFLAGS)
-
-CLI_OBJ = cli.o
-LIB_OBJ = crc.o nvram.o
-
-all: cli libnvram
-
-cli: libnvram
-	$(CC) $(CLI_CFLAGS) -c -o cli.o cli.c
-	$(CC) -o $(CLI_FILENAME) $(CLI_LDFLAGS) $(CLI_OBJ) \
-		$(LIB_FILENAME).$(LIB_VERMAJOR).$(LIB_VERMINOR)
-
-cli.o: cli.c
-	$(CC) $(CLI_CFLAGS) -c -o $@ $<
-
-libnvram:
-	$(CC) $(LIB_CFLAGS) -c -o crc.o crc.c
-	$(CC) $(LIB_CFLAGS) -c -o nvram.o nvram.c
-	$(CC) $(LIB_CFLAGS) $(LIB_LDFLAGS) \
-		-o $(LIB_FILENAME).$(LIB_VERMAJOR).$(LIB_VERMINOR) $(LIB_OBJ)
-
-clean:
-	rm -f $(CLI_FILENAME) $(LIB_FILENAME)* *.o
diff --git a/package/system/utils/nvram/src/cli.c b/package/system/utils/nvram/src/cli.c
deleted file mode 100644
index 66ef904885..0000000000
--- a/package/system/utils/nvram/src/cli.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Command line interface for libnvram
- *
- * Copyright 2009, Jo-Philipp Wich <xm@subsignal.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- *
- * The libnvram code is based on Broadcom code for Linux 2.4.x .
- *
- */
-
-#include "nvram.h"
-
-
-static nvram_handle_t * nvram_open_rdonly(void)
-{
-	const char *file = nvram_find_staging();
-
-	if( file == NULL )
-		file = nvram_find_mtd();
-
-	if( file != NULL )
-		return nvram_open(file, NVRAM_RO);
-
-	return NULL;
-}
-
-static nvram_handle_t * nvram_open_staging(void)
-{
-	if( nvram_find_staging() != NULL || nvram_to_staging() == 0 )
-		return nvram_open(NVRAM_STAGING, NVRAM_RW);
-
-	return NULL;
-}
-
-static int do_show(nvram_handle_t *nvram)
-{
-	nvram_tuple_t *t;
-	int stat = 1;
-
-	if( (t = nvram_getall(nvram)) != NULL )
-	{
-		while( t )
-		{
-			printf("%s=%s\n", t->name, t->value);
-			t = t->next;
-		}
-
-		stat = 0;
-	}
-
-	return stat;
-}
-
-static int do_get(nvram_handle_t *nvram, const char *var)
-{
-	const char *val;
-	int stat = 1;
-
-	if( (val = nvram_get(nvram, var)) != NULL )
-	{
-		printf("%s\n", val);
-		stat = 0;
-	}
-
-	return stat;
-}
-
-static int do_unset(nvram_handle_t *nvram, const char *var)
-{
-	return nvram_unset(nvram, var);
-}
-
-static int do_set(nvram_handle_t *nvram, const char *pair)
-{
-	char *val = strstr(pair, "=");
-	char var[strlen(pair)];
-	int stat = 1;
-
-	if( val != NULL )
-	{
-		memset(var, 0, sizeof(var));
-		strncpy(var, pair, (int)(val-pair));
-		stat = nvram_set(nvram, var, (char *)(val + 1));
-	}
-
-	return stat;
-}
-
-static int do_info(nvram_handle_t *nvram)
-{
-	nvram_header_t *hdr = nvram_header(nvram);
-
-	/* CRC8 over the last 11 bytes of the header and data bytes */
-	uint8_t crc = hndcrc8((unsigned char *) &hdr[0] + NVRAM_CRC_START_POSITION,
-		hdr->len - NVRAM_CRC_START_POSITION, 0xff);
-
-	/* Show info */
-	printf("Magic:         0x%08X\n",   hdr->magic);
-	printf("Length:        0x%08X\n",   hdr->len);
-	printf("Offset:        0x%08X\n",   nvram->offset);
-
-	printf("CRC8:          0x%02X (calculated: 0x%02X)\n",
-		hdr->crc_ver_init & 0xFF, crc);
-
-	printf("Version:       0x%02X\n",   (hdr->crc_ver_init >> 8) & 0xFF);
-	printf("SDRAM init:    0x%04X\n",   (hdr->crc_ver_init >> 16) & 0xFFFF);
-	printf("SDRAM config:  0x%04X\n",   hdr->config_refresh & 0xFFFF);
-	printf("SDRAM refresh: 0x%04X\n",   (hdr->config_refresh >> 16) & 0xFFFF);
-	printf("NCDL values:   0x%08X\n\n", hdr->config_ncdl);
-
-	printf("%i bytes used / %i bytes available (%.2f%%)\n",
-		hdr->len, NVRAM_SPACE - hdr->len,
-		(100.00 / (double)NVRAM_SPACE) * (double)hdr->len);
-
-	return 0;
-}
-
-
-int main( int argc, const char *argv[] )
-{
-	nvram_handle_t *nvram;
-	int commit = 0;
-	int write = 0;
-	int stat = 1;
-	int done = 0;
-	int i;
-
-	/* Ugly... iterate over arguments to see whether we can expect a write */
-	for( i = 1; i < argc; i++ )
-		if( ( !strcmp(argv[i], "set")   && ++i < argc ) ||
-			( !strcmp(argv[i], "unset") && ++i < argc ) ||
-			!strcmp(argv[i], "commit") )
-		{
-			write = 1;
-			break;
-		}
-
-
-	nvram = write ? nvram_open_staging() : nvram_open_rdonly();
-
-	if( nvram != NULL && argc > 1 )
-	{
-		for( i = 1; i < argc; i++ )
-		{
-			if( !strcmp(argv[i], "show") )
-			{
-				stat = do_show(nvram);
-				done++;
-			}
-			else if( !strcmp(argv[i], "info") )
-			{
-				stat = do_info(nvram);
-				done++;
-			}
-			else if( !strcmp(argv[i], "get") || !strcmp(argv[i], "unset") || !strcmp(argv[i], "set") )
-			{
-				if( (i+1) < argc )
-				{
-					switch(argv[i++][0])
-					{
-						case 'g':
-							stat = do_get(nvram, argv[i]);
-							break;
-
-						case 'u':
-							stat = do_unset(nvram, argv[i]);
-							break;
-
-						case 's':
-							stat = do_set(nvram, argv[i]);
-							break;
-					}
-					done++;
-				}
-				else
-				{
-					fprintf(stderr, "Command '%s' requires an argument!\n", argv[i]);
-					done = 0;
-					break;
-				}
-			}
-			else if( !strcmp(argv[i], "commit") )
-			{
-				commit = 1;
-				done++;
-			}
-			else
-			{
-				fprintf(stderr, "Unknown option '%s' !\n", argv[i]);
-				done = 0;
-				break;
-			}
-		}
-
-		if( write )
-			stat = nvram_commit(nvram);
-
-		nvram_close(nvram);
-
-		if( commit )
-			stat = staging_to_nvram();
-	}
-
-	if( !nvram )
-	{
-		fprintf(stderr,
-			"Could not open nvram! Possible reasons are:\n"
-			"	- No device found (/proc not mounted or no nvram present)\n"
-			"	- Insufficient permissions to open mtd device\n"
-			"	- Insufficient memory to complete operation\n"
-			"	- Memory mapping failed or not supported\n"
-		);
-
-		stat = 1;
-	}
-	else if( !done )
-	{
-		fprintf(stderr,
-			"Usage:\n"
-			"	nvram show\n"
-			"	nvram info\n"
-			"	nvram get variable\n"
-			"	nvram set variable=value [set ...]\n"
-			"	nvram unset variable [unset ...]\n"
-			"	nvram commit\n"
-		);
-
-		stat = 1;
-	}
-
-	return stat;
-}
diff --git a/package/system/utils/nvram/src/crc.c b/package/system/utils/nvram/src/crc.c
deleted file mode 100644
index 22a36652aa..0000000000
--- a/package/system/utils/nvram/src/crc.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#include "nvram.h"
-
-/*******************************************************************************
- * crc8
- *
- * Computes a crc8 over the input data using the polynomial:
- *
- *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
- *
- * The caller provides the initial value (either CRC8_INIT_VALUE
- * or the previous returned value) to allow for processing of
- * discontiguous blocks of data.  When generating the CRC the
- * caller is responsible for complementing the final return value
- * and inserting it into the byte stream.  When checking, a final
- * return value of CRC8_GOOD_VALUE indicates a valid CRC.
- *
- * Reference: Dallas Semiconductor Application Note 27
- *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
- *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
- *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
- *
- * ****************************************************************************
- */
-
-static const uint8_t crc8_table[256] = {
-	0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-	0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-	0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-	0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-	0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-	0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-	0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-	0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-	0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-	0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-	0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-	0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-	0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-	0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-	0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-	0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-	0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-	0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-	0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-	0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-	0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-	0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-	0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-	0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-	0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-	0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-	0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-	0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-	0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-	0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-	0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-	0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-};
-
-uint8_t hndcrc8 (
-	uint8_t * pdata,  /* pointer to array of data to process */
-	uint32_t nbytes,  /* number of input data bytes to process */
-	uint8_t crc       /* either CRC8_INIT_VALUE or previous return value */
-) {
-	while (nbytes-- > 0)
-		crc = crc8_table[(crc ^ *pdata++) & 0xff];
-
-	return crc;
-}
diff --git a/package/system/utils/nvram/src/nvram.c b/package/system/utils/nvram/src/nvram.c
deleted file mode 100644
index a0bc006d15..0000000000
--- a/package/system/utils/nvram/src/nvram.c
+++ /dev/null
@@ -1,556 +0,0 @@
-/*
- * NVRAM variable manipulation (common)
- *
- * Copyright 2004, Broadcom Corporation
- * Copyright 2009-2010, OpenWrt.org
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include "nvram.h"
-
-#define TRACE(msg) \
-	printf("%s(%i) in %s(): %s\n", \
-		__FILE__, __LINE__, __FUNCTION__, msg ? msg : "?")
-
-size_t nvram_erase_size = 0;
-
-
-/*
- * -- Helper functions --
- */
-
-/* String hash */
-static uint32_t hash(const char *s)
-{
-	uint32_t hash = 0;
-
-	while (*s)
-		hash = 31 * hash + *s++;
-
-	return hash;
-}
-
-/* Free all tuples. */
-static void _nvram_free(nvram_handle_t *h)
-{
-	uint32_t i;
-	nvram_tuple_t *t, *next;
-
-	/* Free hash table */
-	for (i = 0; i < NVRAM_ARRAYSIZE(h->nvram_hash); i++) {
-		for (t = h->nvram_hash[i]; t; t = next) {
-			next = t->next;
-			free(t);
-		}
-		h->nvram_hash[i] = NULL;
-	}
-
-	/* Free dead table */
-	for (t = h->nvram_dead; t; t = next) {
-		next = t->next;
-		free(t);
-	}
-
-	h->nvram_dead = NULL;
-}
-
-/* (Re)allocate NVRAM tuples. */
-static nvram_tuple_t * _nvram_realloc( nvram_handle_t *h, nvram_tuple_t *t,
-	const char *name, const char *value )
-{
-	if ((strlen(value) + 1) > NVRAM_SPACE)
-		return NULL;
-
-	if (!t) {
-		if (!(t = malloc(sizeof(nvram_tuple_t) + strlen(name) + 1)))
-			return NULL;
-
-		/* Copy name */
-		t->name = (char *) &t[1];
-		strcpy(t->name, name);
-
-		t->value = NULL;
-	}
-
-	/* Copy value */
-	if (!t->value || strcmp(t->value, value))
-	{
-		if(!(t->value = (char *) realloc(t->value, strlen(value)+1)))
-			return NULL;
-
-		strcpy(t->value, value);
-		t->value[strlen(value)] = '\0';
-	}
-
-	return t;
-}
-
-/* (Re)initialize the hash table. */
-static int _nvram_rehash(nvram_handle_t *h)
-{
-	nvram_header_t *header = nvram_header(h);
-	char buf[] = "0xXXXXXXXX", *name, *value, *eq;
-
-	/* (Re)initialize hash table */
-	_nvram_free(h);
-
-	/* Parse and set "name=value\0 ... \0\0" */
-	name = (char *) &header[1];
-
-	for (; *name; name = value + strlen(value) + 1) {
-		if (!(eq = strchr(name, '=')))
-			break;
-		*eq = '\0';
-		value = eq + 1;
-		nvram_set(h, name, value);
-		*eq = '=';
-	}
-
-	/* Set special SDRAM parameters */
-	if (!nvram_get(h, "sdram_init")) {
-		sprintf(buf, "0x%04X", (uint16_t)(header->crc_ver_init >> 16));
-		nvram_set(h, "sdram_init", buf);
-	}
-	if (!nvram_get(h, "sdram_config")) {
-		sprintf(buf, "0x%04X", (uint16_t)(header->config_refresh & 0xffff));
-		nvram_set(h, "sdram_config", buf);
-	}
-	if (!nvram_get(h, "sdram_refresh")) {
-		sprintf(buf, "0x%04X",
-			(uint16_t)((header->config_refresh >> 16) & 0xffff));
-		nvram_set(h, "sdram_refresh", buf);
-	}
-	if (!nvram_get(h, "sdram_ncdl")) {
-		sprintf(buf, "0x%08X", header->config_ncdl);
-		nvram_set(h, "sdram_ncdl", buf);
-	}
-
-	return 0;
-}
-
-
-/*
- * -- Public functions --
- */
-
-/* Get nvram header. */
-nvram_header_t * nvram_header(nvram_handle_t *h)
-{
-	return (nvram_header_t *) &h->mmap[h->offset];
-}
-
-/* Get the value of an NVRAM variable. */
-char * nvram_get(nvram_handle_t *h, const char *name)
-{
-	uint32_t i;
-	nvram_tuple_t *t;
-	char *value;
-
-	if (!name)
-		return NULL;
-
-	/* Hash the name */
-	i = hash(name) % NVRAM_ARRAYSIZE(h->nvram_hash);
-
-	/* Find the associated tuple in the hash table */
-	for (t = h->nvram_hash[i]; t && strcmp(t->name, name); t = t->next);
-
-	value = t ? t->value : NULL;
-
-	return value;
-}
-
-/* Set the value of an NVRAM variable. */
-int nvram_set(nvram_handle_t *h, const char *name, const char *value)
-{
-	uint32_t i;
-	nvram_tuple_t *t, *u, **prev;
-
-	/* Hash the name */
-	i = hash(name) % NVRAM_ARRAYSIZE(h->nvram_hash);
-
-	/* Find the associated tuple in the hash table */
-	for (prev = &h->nvram_hash[i], t = *prev;
-		 t && strcmp(t->name, name); prev = &t->next, t = *prev);
-
-	/* (Re)allocate tuple */
-	if (!(u = _nvram_realloc(h, t, name, value)))
-		return -12; /* -ENOMEM */
-
-	/* Value reallocated */
-	if (t && t == u)
-		return 0;
-
-	/* Move old tuple to the dead table */
-	if (t) {
-		*prev = t->next;
-		t->next = h->nvram_dead;
-		h->nvram_dead = t;
-	}
-
-	/* Add new tuple to the hash table */
-	u->next = h->nvram_hash[i];
-	h->nvram_hash[i] = u;
-
-	return 0;
-}
-
-/* Unset the value of an NVRAM variable. */
-int nvram_unset(nvram_handle_t *h, const char *name)
-{
-	uint32_t i;
-	nvram_tuple_t *t, **prev;
-
-	if (!name)
-		return 0;
-
-	/* Hash the name */
-	i = hash(name) % NVRAM_ARRAYSIZE(h->nvram_hash);
-
-	/* Find the associated tuple in the hash table */
-	for (prev = &h->nvram_hash[i], t = *prev;
-		 t && strcmp(t->name, name); prev = &t->next, t = *prev);
-
-	/* Move it to the dead table */
-	if (t) {
-		*prev = t->next;
-		t->next = h->nvram_dead;
-		h->nvram_dead = t;
-	}
-
-	return 0;
-}
-
-/* Get all NVRAM variables. */
-nvram_tuple_t * nvram_getall(nvram_handle_t *h)
-{
-	int i;
-	nvram_tuple_t *t, *l, *x;
-
-	l = NULL;
-
-	for (i = 0; i < NVRAM_ARRAYSIZE(h->nvram_hash); i++) {
-		for (t = h->nvram_hash[i]; t; t = t->next) {
-			if( (x = (nvram_tuple_t *) malloc(sizeof(nvram_tuple_t))) != NULL )
-			{
-				x->name  = t->name;
-				x->value = t->value;
-				x->next  = l;
-				l = x;
-			}
-			else
-			{
-				break;
-			}
-		}
-	}
-
-	return l;
-}
-
-/* Regenerate NVRAM. */
-int nvram_commit(nvram_handle_t *h)
-{
-	nvram_header_t *header = nvram_header(h);
-	char *init, *config, *refresh, *ncdl;
-	char *ptr, *end;
-	int i;
-	nvram_tuple_t *t;
-	nvram_header_t tmp;
-	uint8_t crc;
-
-	/* Regenerate header */
-	header->magic = NVRAM_MAGIC;
-	header->crc_ver_init = (NVRAM_VERSION << 8);
-	if (!(init = nvram_get(h, "sdram_init")) ||
-		!(config = nvram_get(h, "sdram_config")) ||
-		!(refresh = nvram_get(h, "sdram_refresh")) ||
-		!(ncdl = nvram_get(h, "sdram_ncdl"))) {
-		header->crc_ver_init |= SDRAM_INIT << 16;
-		header->config_refresh = SDRAM_CONFIG;
-		header->config_refresh |= SDRAM_REFRESH << 16;
-		header->config_ncdl = 0;
-	} else {
-		header->crc_ver_init |= (strtoul(init, NULL, 0) & 0xffff) << 16;
-		header->config_refresh = strtoul(config, NULL, 0) & 0xffff;
-		header->config_refresh |= (strtoul(refresh, NULL, 0) & 0xffff) << 16;
-		header->config_ncdl = strtoul(ncdl, NULL, 0);
-	}
-
-	/* Clear data area */
-	ptr = (char *) header + sizeof(nvram_header_t);
-	memset(ptr, 0xFF, NVRAM_SPACE - sizeof(nvram_header_t));
-	memset(&tmp, 0, sizeof(nvram_header_t));
-
-	/* Leave space for a double NUL at the end */
-	end = (char *) header + NVRAM_SPACE - 2;
-
-	/* Write out all tuples */
-	for (i = 0; i < NVRAM_ARRAYSIZE(h->nvram_hash); i++) {
-		for (t = h->nvram_hash[i]; t; t = t->next) {
-			if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end)
-				break;
-			ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1;
-		}
-	}
-
-	/* End with a double NULL and pad to 4 bytes */
-	*ptr = '\0';
-	ptr++;
-
-	if( (int)ptr % 4 )
-		memset(ptr, 0, 4 - ((int)ptr % 4));
-
-	ptr++;
-
-	/* Set new length */
-	header->len = NVRAM_ROUNDUP(ptr - (char *) header, 4);
-
-	/* Little-endian CRC8 over the last 11 bytes of the header */
-	tmp.crc_ver_init   = header->crc_ver_init;
-	tmp.config_refresh = header->config_refresh;
-	tmp.config_ncdl    = header->config_ncdl;
-	crc = hndcrc8((unsigned char *) &tmp + NVRAM_CRC_START_POSITION,
-		sizeof(nvram_header_t) - NVRAM_CRC_START_POSITION, 0xff);
-
-	/* Continue CRC8 over data bytes */
-	crc = hndcrc8((unsigned char *) &header[0] + sizeof(nvram_header_t),
-		header->len - sizeof(nvram_header_t), crc);
-
-	/* Set new CRC8 */
-	header->crc_ver_init |= crc;
-
-	/* Write out */
-	msync(h->mmap, h->length, MS_SYNC);
-	fsync(h->fd);
-
-	/* Reinitialize hash table */
-	return _nvram_rehash(h);
-}
-
-/* Open NVRAM and obtain a handle. */
-nvram_handle_t * nvram_open(const char *file, int rdonly)
-{
-	int i;
-	int fd;
-	char *mtd = NULL;
-	nvram_handle_t *h;
-	nvram_header_t *header;
-	int offset = -1;
-
-	/* If erase size or file are undefined then try to define them */
-	if( (nvram_erase_size == 0) || (file == NULL) )
-	{
-		/* Finding the mtd will set the appropriate erase size */
-		if( (mtd = nvram_find_mtd()) == NULL || nvram_erase_size == 0 )
-		{
-			free(mtd);
-			return NULL;
-		}
-	}
-
-	if( (fd = open(file ? file : mtd, O_RDWR)) > -1 )
-	{
-		char *mmap_area = (char *) mmap(
-			NULL, nvram_erase_size, PROT_READ | PROT_WRITE,
-			(( rdonly == NVRAM_RO ) ? MAP_PRIVATE : MAP_SHARED) | MAP_LOCKED, fd, 0);
-
-		if( mmap_area != MAP_FAILED )
-		{
-			for( i = 0; i <= ((nvram_erase_size - NVRAM_SPACE) / sizeof(uint32_t)); i++ )
-			{
-				if( ((uint32_t *)mmap_area)[i] == NVRAM_MAGIC )
-				{
-					offset = i * sizeof(uint32_t);
-					break;
-				}
-			}
-
-			if( offset < 0 )
-			{
-				free(mtd);
-				return NULL;
-			}
-			else if( (h = malloc(sizeof(nvram_handle_t))) != NULL )
-			{
-				memset(h, 0, sizeof(nvram_handle_t));
-
-				h->fd     = fd;
-				h->mmap   = mmap_area;
-				h->length = nvram_erase_size;
-				h->offset = offset;
-
-				header = nvram_header(h);
-
-				if( header->magic == NVRAM_MAGIC )
-				{
-					_nvram_rehash(h);
-					free(mtd);
-					return h;
-				}
-				else
-				{
-					munmap(h->mmap, h->length);
-					free(h);
-				}
-			}
-		}
-	}
-
-	free(mtd);
-	return NULL;
-}
-
-/* Close NVRAM and free memory. */
-int nvram_close(nvram_handle_t *h)
-{
-	_nvram_free(h);
-	munmap(h->mmap, h->length);
-	close(h->fd);
-	free(h);
-
-	return 0;
-}
-
-/* Determine NVRAM device node. */
-char * nvram_find_mtd(void)
-{
-	FILE *fp;
-	int i, esz;
-	char dev[PATH_MAX];
-	char *path = NULL;
-	struct stat s;
-	int supported = 1;
-
-	/* Refuse any operation on the WGT634U */
-	if( (fp = fopen("/proc/diag/model", "r")) )
-	{
-		if( fgets(dev, sizeof(dev), fp) && !strncmp(dev, "Netgear WGT634U", 15) )
-			supported = 0;
-
-		fclose(fp);
-	}
-
-	if( supported && (fp = fopen("/proc/mtd", "r")) )
-	{
-		while( fgets(dev, sizeof(dev), fp) )
-		{
-			if( strstr(dev, "nvram") && sscanf(dev, "mtd%d: %08x", &i, &esz) )
-			{
-				nvram_erase_size = esz;
-
-				sprintf(dev, "/dev/mtdblock/%d", i);
-				if( stat(dev, &s) > -1 && (s.st_mode & S_IFBLK) )
-				{
-					if( (path = (char *) malloc(strlen(dev)+1)) != NULL )
-					{
-						strncpy(path, dev, strlen(dev)+1);
-						break;
-					}
-				}
-				else
-				{
-					sprintf(dev, "/dev/mtdblock%d", i);
-					if( stat(dev, &s) > -1 && (s.st_mode & S_IFBLK) )
-					{
-						if( (path = (char *) malloc(strlen(dev)+1)) != NULL )
-						{
-							strncpy(path, dev, strlen(dev)+1);
-							break;
-						}
-					}
-				}
-			}
-		}
-		fclose(fp);
-	}
-
-	return path;
-}
-
-/* Check NVRAM staging file. */
-char * nvram_find_staging(void)
-{
-	struct stat s;
-
-	if( (stat(NVRAM_STAGING, &s) > -1) && (s.st_mode & S_IFREG) )
-	{
-		return NVRAM_STAGING;
-	}
-
-	return NULL;
-}
-
-/* Copy NVRAM contents to staging file. */
-int nvram_to_staging(void)
-{
-	int fdmtd, fdstg, stat;
-	char *mtd = nvram_find_mtd();
-	char buf[nvram_erase_size];
-
-	stat = -1;
-
-	if( (mtd != NULL) && (nvram_erase_size > 0) )
-	{
-		if( (fdmtd = open(mtd, O_RDONLY)) > -1 )
-		{
-			if( read(fdmtd, buf, sizeof(buf)) == sizeof(buf) )
-			{
-				if((fdstg = open(NVRAM_STAGING, O_WRONLY | O_CREAT, 0600)) > -1)
-				{
-					write(fdstg, buf, sizeof(buf));
-					fsync(fdstg);
-					close(fdstg);
-
-					stat = 0;
-				}
-			}
-
-			close(fdmtd);
-		}
-	}
-
-	free(mtd);
-	return stat;
-}
-
-/* Copy staging file to NVRAM device. */
-int staging_to_nvram(void)
-{
-	int fdmtd, fdstg, stat;
-	char *mtd = nvram_find_mtd();
-	char buf[nvram_erase_size];
-
-	stat = -1;
-
-	if( (mtd != NULL) && (nvram_erase_size > 0) )
-	{
-		if( (fdstg = open(NVRAM_STAGING, O_RDONLY)) > -1 )
-		{
-			if( read(fdstg, buf, sizeof(buf)) == sizeof(buf) )
-			{
-				if( (fdmtd = open(mtd, O_WRONLY | O_SYNC)) > -1 )
-				{
-					write(fdmtd, buf, sizeof(buf));
-					fsync(fdmtd);
-					close(fdmtd);
-					stat = 0;
-				}
-			}
-
-			close(fdstg);
-
-			if( !stat )
-				stat = unlink(NVRAM_STAGING) ? 1 : 0;
-		}
-	}
-
-	free(mtd);
-	return stat;
-}
diff --git a/package/system/utils/nvram/src/nvram.h b/package/system/utils/nvram/src/nvram.h
deleted file mode 100644
index c72f67e9a8..0000000000
--- a/package/system/utils/nvram/src/nvram.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * NVRAM variable manipulation
- *
- * Copyright 2007, Broadcom Corporation
- * Copyright 2009, OpenWrt.org
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _nvram_h_
-#define _nvram_h_
-
-#include <stdint.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <linux/limits.h>
-
-#include "sdinitvals.h"
-
-
-struct nvram_header {
-	uint32_t magic;
-	uint32_t len;
-	uint32_t crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-	uint32_t config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-	uint32_t config_ncdl;	/* ncdl values for memc */
-} __attribute__((__packed__));
-
-struct nvram_tuple {
-	char *name;
-	char *value;
-	struct nvram_tuple *next;
-};
-
-struct nvram_handle {
-	int fd;
-	char *mmap;
-	unsigned int length;
-	unsigned int offset;
-	struct nvram_tuple *nvram_hash[257];
-	struct nvram_tuple *nvram_dead;
-};
-
-typedef struct nvram_handle nvram_handle_t;
-typedef struct nvram_header nvram_header_t;
-typedef struct nvram_tuple  nvram_tuple_t;
-
-
-/* Get nvram header. */
-nvram_header_t * nvram_header(nvram_handle_t *h);
-
-/* Set the value of an NVRAM variable */
-int nvram_set(nvram_handle_t *h, const char *name, const char *value);
-
-/* Get the value of an NVRAM variable. */
-char * nvram_get(nvram_handle_t *h, const char *name);
-
-/* Unset the value of an NVRAM variable. */
-int nvram_unset(nvram_handle_t *h, const char *name);
-
-/* Get all NVRAM variables. */
-nvram_tuple_t * nvram_getall(nvram_handle_t *h);
-
-/* Regenerate NVRAM. */
-int nvram_commit(nvram_handle_t *h);
-
-/* Open NVRAM and obtain a handle. */
-nvram_handle_t * nvram_open(const char *file, int rdonly);
-
-/* Close NVRAM and free memory. */
-int nvram_close(nvram_handle_t *h);
-
-/* Get the value of an NVRAM variable in a safe way, use "" instead of NULL. */
-#define nvram_safe_get(h, name) (nvram_get(h, name) ? : "")
-
-/* Computes a crc8 over the input data. */
-uint8_t hndcrc8 (uint8_t * pdata, uint32_t nbytes, uint8_t crc);
-
-/* Returns the crc value of the nvram. */
-uint8_t nvram_calc_crc(nvram_header_t * nvh);
-
-/* Determine NVRAM device node. */
-char * nvram_find_mtd(void);
-
-/* Copy NVRAM contents to staging file. */
-int nvram_to_staging(void);
-
-/* Copy staging file to NVRAM device. */
-int staging_to_nvram(void);
-
-/* Check NVRAM staging file. */
-char * nvram_find_staging(void);
-
-
-/* Staging file for NVRAM */
-#define NVRAM_STAGING		"/tmp/.nvram"
-#define NVRAM_RO			1
-#define NVRAM_RW			0
-
-/* Helper macros */
-#define NVRAM_ARRAYSIZE(a)	sizeof(a)/sizeof(a[0])
-#define	NVRAM_ROUNDUP(x, y)	((((x)+((y)-1))/(y))*(y))
-
-/* NVRAM constants */
-#define NVRAM_SPACE			0x8000
-#define NVRAM_MAGIC			0x48534C46	/* 'FLSH' */
-#define NVRAM_VERSION		1
-
-#define NVRAM_CRC_START_POSITION	9 /* magic, len, crc8 to be skipped */
-
-
-#endif /* _nvram_h_ */
diff --git a/package/system/utils/nvram/src/sdinitvals.h b/package/system/utils/nvram/src/sdinitvals.h
deleted file mode 100644
index 5a289adece..0000000000
--- a/package/system/utils/nvram/src/sdinitvals.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * SDRAM init values
- *
- * Copyright 2007, Broadcom Corporation
- * Copyright 2009, OpenWrt.org
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sdinitvals_h_
-#define _sdinitvals_h_
-
-/* SDRAM refresh control (refresh) register bits */
-#define SDRAM_REF(p)    (((p)&0xff) | SDRAM_REF_EN)     /* Refresh period */
-#define SDRAM_REF_EN    0x8000          /* Writing 1 enables periodic refresh */
-
-/* SDRAM Core default Init values (OCP ID 0x803) */
-#define MEM4MX16X2      0x419   /* 16 MB */
-
-#define SDRAM_INIT	MEM4MX16X2
-#define SDRAM_BURSTFULL 0x0000  /* Use full page bursts */
-#define SDRAM_CONFIG    SDRAM_BURSTFULL
-#define SDRAM_REFRESH   SDRAM_REF(0x40)
-
-#endif /* _sdinitvals_h_ */
diff --git a/package/system/utils/robocfg/Makefile b/package/system/utils/robocfg/Makefile
deleted file mode 100644
index 4bc72f51db..0000000000
--- a/package/system/utils/robocfg/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=robocfg
-PKG_VERSION:=0.01
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/robocfg
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/robocfg
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=BCM5325E/536x switch configuration utility
-endef
-
-define Package/robocfg/description
- This package contains an utility for configuring the Broadcom BCM5325E/536x 
- based switches.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/robocfg/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/robocfg $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,robocfg))
diff --git a/package/system/utils/robocfg/src/Makefile b/package/system/utils/robocfg/src/Makefile
deleted file mode 100644
index e11acb020a..0000000000
--- a/package/system/utils/robocfg/src/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-
-all: robocfg
-
-%.o: %.c
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $^
-
-robocfg: robocfg.o
-	$(CC) -o $@ $^
-
-clean:
-	rm -f *.o robocfg
diff --git a/package/system/utils/robocfg/src/etc53xx.h b/package/system/utils/robocfg/src/etc53xx.h
deleted file mode 100644
index d5b1310cb6..0000000000
--- a/package/system/utils/robocfg/src/etc53xx.h
+++ /dev/null
@@ -1,619 +0,0 @@
-/*
- * Broadcom Home Gateway Reference Design
- * BCM53xx Register definitions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef __BCM535M_H_
-#define __BCM535M_H_
-
-/* ROBO embedded device type */
-#define ROBO_DEV_5380 1
-#define ROBO_DEV_5365 2
-#define ROBO_DEV_5350 3
-
-/* BCM5325m GLOBAL PAGE REGISTER MAP */
-#ifndef _CFE_
-#pragma pack(1)
-#endif
-
-/* BCM5325m Serial Management Port (SMP) Page offsets */
-#define ROBO_CTRL_PAGE        0x00  /* Control registers */
-#define ROBO_STAT_PAGE        0x01  /* Status register */
-#define ROBO_MGMT_PAGE        0x02  /* Management Mode registers */
-#define ROBO_MIB_AC_PAGE      0x03  /* MIB Autocast registers */
-#define ROBO_ARLCTRL_PAGE     0x04  /* ARL Control Registers */
-#define ROBO_ARLIO_PAGE       0x05  /* ARL Access Registers */
-#define ROBO_FRAMEBUF_PAGE    0x06  /* Management frame access registers */
-#define ROBO_MEM_ACCESS_PAGE  0x08  /* Memory access registers */
-
-/* PHY Registers */
-#define ROBO_PORT0_MII_PAGE    0x10 /* Port 0 MII Registers */
-#define ROBO_PORT1_MII_PAGE    0x11 /* Port 1 MII Registers */
-#define ROBO_PORT2_MII_PAGE    0x12 /* Port 2 MII Registers */
-#define ROBO_PORT3_MII_PAGE    0x13 /* Port 3 MII Registers */
-#define ROBO_PORT4_MII_PAGE    0x14 /* Port 4 MII Registers */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MII_PAGE    0x15 /* Port 5 MII Registers */
-#define ROBO_PORT6_MII_PAGE    0x16 /* Port 6 MII Registers */
-#define ROBO_PORT7_MII_PAGE    0x17 /* Port 7 MII Registers */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_PAGE      0x18 /* Inverse MII Port (to EMAC) */
-#define ROBO_ALL_PORT_PAGE     0x19 /* All ports MII Registers (broadcast)*/
-
-/* MAC Statistics registers */
-#define ROBO_PORT0_MIB_PAGE       0x20 /* Port 0 10/100 MIB Statistics */
-#define ROBO_PORT1_MIB_PAGE       0x21 /* Port 1 10/100 MIB Statistics */
-#define ROBO_PORT2_MIB_PAGE       0x22 /* Port 2 10/100 MIB Statistics */
-#define ROBO_PORT3_MIB_PAGE       0x23 /* Port 3 10/100 MIB Statistics */
-#define ROBO_PORT4_MIB_PAGE       0x24 /* Port 4 10/100 MIB Statistics */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MIB_PAGE       0x25 /* Port 5 10/100 MIB Statistics */
-#define ROBO_PORT6_MIB_PAGE       0x26 /* Port 6 10/100 MIB Statistics */
-#define ROBO_PORT7_MIB_PAGE       0x27 /* Port 7 10/100 MIB Statistics */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_MIB_PAGE     0x28 /* Inverse MII Port MIB Statistics */
-
-/* Quality of Service (QoS) Registers */
-#define ROBO_QOS_PAGE             0x30 /* QoS Registers */
-
-/* VLAN Registers */
-#define ROBO_VLAN_PAGE            0x34 /* VLAN Registers */
-
-/* Note SPI Data/IO Registers not used */
-#define ROBO_SPI_DATA_IO_0_PAGE   0xf0 /* SPI Data I/O 0 */
-#define ROBO_SPI_DATA_IO_1_PAGE   0xf1 /* SPI Data I/O 1 */
-#define ROBO_SPI_DATA_IO_2_PAGE   0xf2 /* SPI Data I/O 2 */
-#define ROBO_SPI_DATA_IO_3_PAGE   0xf3 /* SPI Data I/O 3 */
-#define ROBO_SPI_DATA_IO_4_PAGE   0xf4 /* SPI Data I/O 4 */
-#define ROBO_SPI_DATA_IO_5_PAGE   0xf5 /* SPI Data I/O 5 */
-#define ROBO_SPI_DATA_IO_6_PAGE   0xf6 /* SPI Data I/O 6 */
-#define ROBO_SPI_DATA_IO_7_PAGE   0xf7 /* SPI Data I/O 7 */
-
-#define ROBO_SPI_STATUS_PAGE      0xfe /* SPI Status Registers */
-#define ROBO_PAGE_PAGE            0xff /* Page Registers */
-
-
-/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */
-typedef struct _ROBO_PORT_CTRL_STRUC
-{
-    unsigned char   rx_disable:1;   /* rx disable */
-    unsigned char   tx_disable:1;   /* tx disable */
-    unsigned char   rsvd:3;         /* reserved */
-    unsigned char   stp_state:3;    /* spanning tree state */
-} ROBO_PORT_CTRL_STRUC;
-
-#define ROBO_PORT0_CTRL           0x00 /* 10/100 Port 0 Control */
-#define ROBO_PORT1_CTRL           0x01 /* 10/100 Port 1 Control */
-#define ROBO_PORT2_CTRL           0x02 /* 10/100 Port 2 Control */
-#define ROBO_PORT3_CTRL           0x03 /* 10/100 Port 3 Control */
-#define ROBO_PORT4_CTRL           0x04 /* 10/100 Port 4 Control */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_CTRL           0x05 /* 10/100 Port 5 Control */
-#define ROBO_PORT6_CTRL           0x06 /* 10/100 Port 6 Control */
-#define ROBO_PORT7_CTRL           0x07 /* 10/100 Port 7 Control */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_CTRL         0x08 /* 10/100 Port 8 Control */
-#define ROBO_SMP_CTRL             0x0a /* SMP Control register */
-#define ROBO_SWITCH_MODE          0x0b /* Switch Mode Control */
-#define ROBO_PORT_OVERRIDE_CTRL   0x0e /* Port state override */
-#define ROBO_PORT_OVERRIDE_RVMII  (1<<4) /* Bit 4 enables RvMII */
-#define ROBO_PD_MODE_CTRL         0x0f /* Power-down mode control */
-#define ROBO_IP_MULTICAST_CTRL    0x21 /* IP Multicast control */
-
-/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */
-#define ROBO_HALF_DUPLEX 0
-#define ROBO_FULL_DUPLEX 1
-
-#define ROBO_LINK_STAT_SUMMARY    0x00 /* Link Status Summary: 16bit */
-#define ROBO_LINK_STAT_CHANGE     0x02 /* Link Status Change: 16bit */
-#define ROBO_SPEED_STAT_SUMMARY   0x04 /* Port Speed Summary: 16bit*/
-#define ROBO_DUPLEX_STAT_SUMMARY  0x06 /* Duplex Status Summary: 16bit */
-#define ROBO_PAUSE_STAT_SUMMARY   0x08 /* PAUSE Status Summary: 16bit */
-#define ROBO_SOURCE_ADDR_CHANGE   0x0C /* Source Address Change: 16bit	*/
-#define ROBO_LSA_PORT0            0x10 /* Last Source Addr, Port 0: 48bits*/
-#define ROBO_LSA_PORT1            0x16 /* Last Source Addr, Port 1: 48bits*/
-#define ROBO_LSA_PORT2            0x1c /* Last Source Addr, Port 2: 48bits*/
-#define ROBO_LSA_PORT3            0x22 /* Last Source Addr, Port 3: 48bits*/
-#define ROBO_LSA_PORT4            0x28 /* Last Source Addr, Port 4: 48bits*/
-#define ROBO_LSA_IM_PORT          0x40 /* Last Source Addr, IM Port: 48bits*/
-
-/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/
-typedef struct _ROBO_GLOBAL_CONFIG_STRUC
-{
-    unsigned char   resetMIB:1;         /* reset MIB counters */
-    unsigned char   rxBPDU:1;           /* receive BDPU enable */
-    unsigned char   rsvd1:2;            /* reserved */
-    unsigned char   MIBacHdrCtrl:1;     /* MIB autocast header control */
-    unsigned char   MIBac:1;            /* MIB autocast enable */
-    unsigned char   frameMgmtPort:2;    /* frame management port */
-} ROBO_GLOBAL_CONFIG_STRUC;
-#define ROBO_GLOBAL_CONFIG        0x00 /* Global Management Config: 8bit*/
-#define ROBO_MGMT_PORT_ID         0x02 /* Management Port ID: 8bit*/
-#define ROBO_RMON_MIB_STEER       0x04 /* RMON Mib Steering: 16bit */
-#define ROBO_MIB_MODE_SELECT      0x04 /* MIB Mode select: 16bit (BCM5350) */
-#define ROBO_AGE_TIMER_CTRL       0x06 /* Age time control: 32bit */
-#define ROBO_MIRROR_CAP_CTRL      0x10 /* Mirror Capture : 16bit */
-#define ROBO_MIRROR_ING_CTRL      0x12 /* Mirror Ingress Control: 16bit */
-#define ROBO_MIRROR_ING_DIV_CTRL  0x14 /* Mirror Ingress Divider: 16bit */
-#define ROBO_MIRROR_ING_MAC_ADDR  0x16 /* Ingress Mirror MAC Addr: 48bit*/
-#define ROBO_MIRROR_EGR_CTRL      0x1c /* Mirror Egress Control: 16bit */
-#define ROBO_MIRROR_EGR_DIV_CTRL  0x1e /* Mirror Egress Divider: 16bit */
-#define ROBO_MIRROR_EGR_MAC_ADDR  0x20 /* Egress Mirror MAC Addr: 48bit*/
-
-/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */
-#define ROBO_MIB_AC_PORT          0x00 /* MIB Autocast Port: 16bit */
-#define ROBO_MIB_AC_HDR_PTR       0x02 /* MIB Autocast Header pointer:16bit*/ 
-#define ROBO_MIB_AC_HDR_LEN       0x04 /* MIB Autocast Header Len: 16bit */
-#define ROBO_MIB_AC_DA            0x06 /* MIB Autocast DA: 48bit */
-#define ROBO_MIB_AC_SA            0x0c /* MIB Autocast SA: 48bit */
-#define ROBO_MIB_AC_TYPE          0x12 /* MIB Autocast Type: 16bit */
-#define ROBO_MIB_AC_RATE          0x14 /* MIB Autocast Rate: 8bit */
-#define ROBO_GET_AC_RATE(secs) ((secs)*10)
-#define ROBO_AC_RATE_MAX          0xff
-#define ROBO_AC_RATE_DEFAULT      0x64  /* 10 secs */
-typedef struct _ROBO_MIB_AC_STRUCT
-{
-    unsigned char   opcode:4;       /* Tx MIB Autocast opcode */
-    unsigned char   portno:4;       /* zero-based port no. */
-    unsigned char   portstate:8;    /* port state */
-    unsigned long long TxOctets;   
-    unsigned int    TxDropPkts;
-    unsigned int    rsvd;
-    unsigned int    TxBroadcastPkts;
-    unsigned int    TxMulticastPkts;
-    unsigned int    TxUnicastPkts;
-    unsigned int    TxCollisions;
-    unsigned int    TxSingleCollision;
-    unsigned int    TxMultiCollision;
-    unsigned int    TxDeferredTransmit;
-    unsigned int    TxLateCollision;
-    unsigned int    TxExcessiveCollision;
-    unsigned int    TxFrameInDiscards;
-    unsigned int    TxPausePkts;
-    unsigned int    rsvd1[2];
-    unsigned long long RxOctets;
-    unsigned int    RxUndersizePkts;
-    unsigned int    RxPausePkts;
-    unsigned int    RxPkts64Octets;
-    unsigned int    RxPkts64to127Octets;
-    unsigned int    RxPkts128to255Octets;
-    unsigned int    RxPkts256to511Octets;
-    unsigned int    RxPkts512to1023Octets;
-    unsigned int    RxPkts1024to1522Octets;
-    unsigned int    RxOversizePkts;
-    unsigned int    RxJabbers;
-    unsigned int    RxAlignmentErrors;
-    unsigned int    RxFCSErrors;
-    unsigned long long RxGoodOctets;
-    unsigned int    RxDropPkts;
-    unsigned int    RxUnicastPkts;
-    unsigned int    RxMulticastPkts;
-    unsigned int    RxBroadcastPkts;
-    unsigned int    RxSAChanges;
-    unsigned int    RxFragments;
-    unsigned int    RxExcessSizeDisc;
-    unsigned int    RxSymbolError;
-} ROBO_MIB_AC_STRUCT;
-
-/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */
-#define ROBO_ARL_CONFIG           0x00 /* ARL Global Configuration: 8bit*/
-#define ROBO_BPDU_MC_ADDR_REG     0x04 /* BPDU Multicast Address Reg:64bit*/
-#define ROBO_MULTIPORT_ADDR_1     0x10 /* Multiport Address 1: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_1   0x16 /* Multiport Vector 1: 16 bits */
-#define ROBO_MULTIPORT_ADDR_2     0x20 /* Multiport Address 2: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_2   0x26 /* Multiport Vector 2: 16 bits */
-#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/
-#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */
-
-
-/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */
-#define ARL_TABLE_WRITE 0              /* for read/write state in control reg */
-#define ARL_TABLE_READ  1              /* for read/write state in control reg */
-#ifdef BCM5380
-#define ARL_VID_BYTES   2              /* number of bytes for VID */
-#else
-#define ARL_VID_BYTES   1              /* number of bytes for VID */
-#endif
-typedef struct _ROBO_ARL_RW_CTRL_STRUC
-{
-    unsigned char   ARLrw:1;    /* ARL read/write (1=read) */
-    unsigned char   rsvd:6;     /* reserved */
-    unsigned char   ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_RW_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC
-{
-    unsigned char   valid:1;    /* ARL search result valid */
-    unsigned char   rsvd:6;     /* reserved */
-    unsigned char   ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_SEARCH_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC
-{
-    unsigned char   portID:4;   /* port id */
-    unsigned char   chipID:2;   /* chip id */
-    unsigned char   rsvd:5;     /* reserved */
-    unsigned char   prio:2;     /* priority */
-    unsigned char   age:1;      /* age */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_ENTRY_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC
-{
-    unsigned char   portID:4;   /* port id */
-    unsigned char   rsvd:1;     /* reserved */
-    unsigned char   vid:8;   	/* vlan id */
-    unsigned char   age:1;      /* age */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_MAC_STRUC
-{
-    unsigned char   macBytes[6];    /* MAC address */
-} ROBO_ARL_ENTRY_MAC_STRUC;
-
-typedef struct _ROBO_ARL_ENTRY_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    /* MAC address */
-    ROBO_ARL_ENTRY_CTRL_STRUC   ctrl;   /* control bits */
-} ROBO_ARL_ENTRY_STRUC;
-
-typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    		/* MAC address */
-    ROBO_ARL_SEARCH_RESULT_CTRL_STRUC   ctrl;   /* control bits */
-} ROBO_ARL_SEARCH_RESULT_STRUC;
-
-/* multicast versions of ARL entry structs */
-typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC
-{
-    unsigned int    portMask:12;/* multicast port mask */
-    unsigned char   prio:1;     /* priority */
-    unsigned char   gigPort:1;  /* gigabit port 1 mask */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC
-{
-    unsigned int    portMask:13;   	/* multicast port mask */
-    unsigned char   age:1;      	/* age */
-    unsigned char   staticEn:1; 	/* static */
-    unsigned char   valid:1;    	/* valid */
-} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC;
-/* BCM5350 extension register */
-typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION
-{
-    unsigned int    prio:2;         /* priority */
-    unsigned int    portMask:1;     /* MSB (MII) of port mask for multicast */
-    unsigned int    reserved:5;
-} ROBO_ARL_SEARCH_RESULT_EXTENSION;
-
-typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC        mac;    /* MAC address */
-    ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl;   /* control bits */
-} ROBO_ARL_ENTRY_MCAST_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
-{
-    ROBO_ARL_ENTRY_MAC_STRUC    mac;    				/* MAC address */
-    ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC   ctrl;   	/* control bits */
-} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC;
-
-#define ROBO_ARL_RW_CTRL          0x00 /* ARL Read/Write Control :  8bit */
-#define ROBO_ARL_MAC_ADDR_IDX     0x02 /* MAC Address Index: 48bit */
-#define ROBO_ARL_VID_TABLE_IDX    0x08 /* VID Table Address Index: 8bit */
-#define ROBO_ARL_ENTRY0           0x10 /* ARL Entry 0 : 64 bit */
-#define ROBO_ARL_ENTRY1           0x18 /* ARL Entry 1 : 64 bit */
-#define ROBO_ARL_SEARCH_CTRL      0x20 /* ARL Search Control: 8bit */
-#define ROBO_ARL_SEARCH_ADDR      0x22 /* ARL Search Address: 16bit */
-#define ROBO_ARL_SEARCH_RESULT    0x24 /* ARL Search Result: 64bit */
-#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
-#define ROBO_ARL_VID_ENTRY0       0x30 /* ARL VID Entry 0: 64bit */
-#define ROBO_ARL_VID_ENTRY1       0x32 /* ARL VID Entry 1: 64bit */
-
-/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
-#define ROBO_MGMT_FRAME_RD_DATA   0x00 /* Management Frame Read Data :8bit*/
-#define ROBO_MGMT_FRAME_WR_DATA   0x01 /* Management Frame Write Data:8bit*/
-#define ROBO_MGMT_FRAME_WR_CTRL   0x02 /* Write Control: 16bit */
-#define ROBO_MGMT_FRAME_RD_STAT   0x04 /* Read Status: 16bit */
-
-/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */
-#define MEM_TABLE_READ  1               /* for read/write state in mem access reg */
-#define MEM_TABLE_WRITE 0               /* for read/write state in mem access reg */
-#define MEM_TABLE_ACCESS_START 1        /* for mem access read/write start */
-#define MEM_TABLE_ACCESS_DONE  0        /* for mem access read/write done */
-#define VLAN_TABLE_ADDR 0x3800          /* BCM5380 only */
-#ifdef BCM5380
-#define NUM_ARL_TABLE_ENTRIES 4096      /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 2048     /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0                /* offset of ARL table start */
-#else
-#define NUM_ARL_TABLE_ENTRIES 2048      /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 256      /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0x3800           /* offset of ARL table start */
-/* corresponding values for 5350 */
-#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */
-#define NUM_VLAN_TABLE_ENTRIES_5350 16  /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR_5350 0x1c00      /* offset of ARL table start (5350) */
-#endif
-typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
-{
-    unsigned int    memAddr:14; /* 64-bit memory address */
-    unsigned char   rsvd:4;     /* reserved */
-    unsigned char   readEn:1;   /* read enable (0 == write) */
-    unsigned char   startDone:1;/* memory access start/done */
-    unsigned int    rsvd1:12;   /* reserved */
-} ROBO_MEM_ACCESS_CTRL_STRUC;
-typedef struct _ROBO_MEM_ACCESS_DATA_STRUC
-{
-    unsigned int    memData[2]; /* 64-bit data */
-    unsigned short  rsvd;       /* reserved */
-} ROBO_MEM_ACCESS_DATA_STRUC;
-
-#ifdef BCM5380
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portID:4;   /* port ID */
-    unsigned int    chipID:2;   /* chip ID */
-    unsigned int    rsvd:6;     /* reserved */
-    unsigned int    highPrio:1; /* high priority address */
-    unsigned int    age:1;      /* entry accessed/learned since ageing process */
-    unsigned int    staticAddr:1;/* entry is static */
-    unsigned int    valid:1;    /* entry is valid */
-    unsigned int    vid:12;     /* vlan id */
-    unsigned int    rsvd2:4;    /* reserved */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#else
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portID:4;   /* port ID */
-    unsigned int    chipID:2;   /* chip ID */
-    unsigned int    rsvd:7;     /* reserved */
-    unsigned int    age:1;      /* entry accessed/learned since ageing process */
-    unsigned int    staticAddr:1;/* entry is static */
-    unsigned int    valid:1;    /* entry is valid */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#endif
-
-/* multicast format*/
-typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC
-{
-    unsigned char   MACaddr[6]; /* MAC addr */
-    unsigned int    portMask:12;/* multicast port mask */
-    unsigned char   prio:1;     /* priority */
-    unsigned char   gigPort:1;  /* gigabit port 1 mask */
-    unsigned char   staticEn:1; /* static */
-    unsigned char   valid:1;    /* valid */
-    unsigned int    vid:12;     /* vlan id */
-    unsigned int    rsvd2:4;    /* reserved */
-} ROBO_ARL_TABLE_MCAST_DATA_STRUC;
-#define ROBO_MEM_ACCESS_CTRL      0x00 /* Memory Read/Write Control :32bit*/
-#define ROBO_MEM_ACCESS_DATA      0x04 /* Memory Read/Write Data:64bit*/
-
-/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */
-typedef struct _ROBO_MII_CTRL_STRUC
-{
-    unsigned char   rsvd:8;     /* reserved */
-    unsigned char   duplex:1;   /* duplex mode */
-    unsigned char   restartAN:1;/* restart auto-negotiation */
-    unsigned char   rsvd1:1;    /* reserved */
-    unsigned char   powerDown:1;/* power down */
-    unsigned char   ANenable:1; /* auto-negotiation enable */
-    unsigned char   speed:1;    /* forced speed selection */
-    unsigned char   loopback:1; /* loopback */
-    unsigned char   reset:1;    /* reset */
-} ROBO_MII_CTRL_STRUC;
-typedef struct _ROBO_MII_AN_ADVERT_STRUC
-{
-    unsigned char   selector:5;     /* advertise selector field */
-    unsigned char   T10BaseT:1;     /* advertise 10BaseT */
-    unsigned char   T10BaseTFull:1; /* advertise 10BaseT, full duplex */
-    unsigned char   T100BaseX:1;    /* advertise 100BaseX */
-    unsigned char   T100BaseXFull:1;/* advertise 100BaseX full duplex */
-    unsigned char   noT4:1;         /* do not advertise T4 */
-    unsigned char   pause:1;        /* advertise pause for full duplex */
-    unsigned char   rsvd:2;         /* reserved */
-    unsigned char   remoteFault:1;  /* transmit remote fault */
-    unsigned char   rsvd1:1;        /* reserved */
-    unsigned char   nextPage:1;     /* nex page operation supported */
-} ROBO_MII_AN_ADVERT_STRUC;
-#define ROBO_MII_CTRL                 0x00 /* Port MII Control */
-#define ROBO_MII_STAT                 0x02 /* Port MII Status  */
-/* Fields of link status register */
-#define ROBO_MII_STAT_JABBER          (1<<1) /* Jabber detected */
-#define ROBO_MII_STAT_LINK            (1<<2) /* Link status */
-
-#define ROBO_MII_PHYID_HI             0x04 /* Port PHY ID High */
-#define ROBO_MII_PHYID_LO             0x06 /* Port PHY ID Low */
-#define ROBO_MII_ANA_REG              0x08 /* MII Auto-Neg Advertisement */
-#define ROBO_MII_ANP_REG              0x0a /* MII Auto-Neg Partner Ability */
-#define ROBO_MII_AN_EXP_REG           0x0c /* MII Auto-Neg Expansion */
-#define ROBO_MII_AN_NP_REG            0x0e /* MII next page */
-#define ROBO_MII_ANP_NP_REG           0x10 /* MII Partner next page */
-#define ROBO_MII_100BX_AUX_CTRL       0x20 /* 100BASE-X Auxiliary Control */
-#define ROBO_MII_100BX_AUX_STAT       0x22 /* 100BASE-X Auxiliary Status  */
-#define ROBO_MII_100BX_RCV_ERR_CTR    0x24 /* 100BASE-X Receive Error Ctr */
-#define ROBO_MII_100BX_RCV_FS_ERR     0x26 /* 100BASE-X Rcv False Sense Ctr */
-#define ROBO_MII_AUX_CTRL             0x30 /* Auxiliary Control/Status */
-/* Fields of Auxiliary control register */
-#define ROBO_MII_AUX_CTRL_FD         (1<<0) /* Full duplex link detected*/
-#define ROBO_MII_AUX_CTRL_SP100      (1<<1) /* Speed 100 indication */
-#define ROBO_MII_AUX_STATUS           0x32 /* Aux Status Summary */
-#define ROBO_MII_CONN_STATUS          0x34 /* Aux Connection Status */
-#define ROBO_MII_AUX_MODE2            0x36 /* Aux Mode 2 */
-#define ROBO_MII_AUX_ERR_STATUS       0x38 /* Aux Error and General Status */
-#define ROBO_MII_AUX_MULTI_PHY        0x3c /* Aux Multiple PHY Register*/
-#define ROBO_MII_BROADCOM_TEST        0x3e /* Broadcom Test Register */
-
-
-/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */
-/* Tranmit Statistics */
-#define ROBO_MIB_TX_OCTETS            0x00 /* 64b: TxOctets */
-#define ROBO_MIB_TX_DROP_PKTS         0x08 /* 32b: TxDropPkts */
-#define ROBO_MIB_TX_BC_PKTS           0x10 /* 32b: TxBroadcastPkts */
-#define ROBO_MIB_TX_MC_PKTS           0x14 /* 32b: TxMulticastPkts */
-#define ROBO_MIB_TX_UC_PKTS           0x18 /* 32b: TxUnicastPkts */
-#define ROBO_MIB_TX_COLLISIONS        0x1c /* 32b: TxCollisions */
-#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */
-#define ROBO_MIB_TX_MULTI_COLLISIONS  0x24 /* 32b: TxMultiCollision */
-#define ROBO_MIB_TX_DEFER_TX          0x28 /* 32b: TxDeferred Transmit */
-#define ROBO_MIB_TX_LATE_COLLISIONS   0x2c /* 32b: TxLateCollision */
-#define ROBO_MIB_EXCESS_COLLISIONS    0x30 /* 32b: TxExcessiveCollision*/
-#define ROBO_MIB_FRAME_IN_DISCARDS    0x34 /* 32b: TxFrameInDiscards */
-#define ROBO_MIB_TX_PAUSE_PKTS        0x38 /* 32b: TxPausePkts */
-
-/* Receive Statistics */
-#define ROBO_MIB_RX_OCTETS            0x44 /* 64b: RxOctets */
-#define ROBO_MIB_RX_UNDER_SIZE_PKTS   0x4c /* 32b: RxUndersizePkts(runts)*/
-#define ROBO_MIB_RX_PAUSE_PKTS        0x50 /* 32b: RxPausePkts */
-#define ROBO_MIB_RX_PKTS_64           0x54 /* 32b: RxPkts64Octets */
-#define ROBO_MIB_RX_PKTS_65_TO_127    0x58 /* 32b: RxPkts64to127Octets*/
-#define ROBO_MIB_RX_PKTS_128_TO_255   0x5c /* 32b: RxPkts128to255Octets*/
-#define ROBO_MIB_RX_PKTS_256_TO_511   0x60 /* 32b: RxPkts256to511Octets*/
-#define ROBO_MIB_RX_PKTS_512_TO_1023  0x64 /* 32b: RxPkts512to1023Octets*/
-#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/
-#define ROBO_MIB_RX_OVER_SIZE_PKTS    0x6c /* 32b: RxOversizePkts*/
-#define ROBO_MIB_RX_JABBERS           0x70 /* 32b: RxJabbers*/
-#define ROBO_MIB_RX_ALIGNMENT_ERRORS  0x74 /* 32b: RxAlignmentErrors*/
-#define ROBO_MIB_RX_FCS_ERRORS        0x78 /* 32b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS       0x7c /* 32b: RxGoodOctets */
-#define ROBO_MIB_RX_DROP_PKTS         0x84 /* 32b: RxDropPkts */
-#define ROBO_MIB_RX_UC_PKTS           0x88 /* 32b: RxUnicastPkts */
-#define ROBO_MIB_RX_MC_PKTS           0x8c /* 32b: RxMulticastPkts */
-#define ROBO_MIB_RX_BC_PKTS           0x90 /* 32b: RxBroadcastPkts */
-#define ROBO_MIB_RX_SA_CHANGES        0x94 /* 32b: RxSAChanges */
-#define ROBO_MIB_RX_FRAGMENTS         0x98 /* 32b: RxFragments */
-#define ROBO_MIB_RX_EXCESS_SZ_DISC    0x9c /* 32b: RxExcessSizeDisc*/
-#define ROBO_MIB_RX_SYMBOL_ERROR      0xa0 /* 32b: RxSymbolError */
-
-/* BCM5350 MIB Statistics */
-/* Group 0 */
-#define ROBO_MIB_TX_GOOD_PKTS         0x00 /* 16b: TxGoodPkts */
-#define ROBO_MIB_TX_UNICAST_PKTS      0x02 /* 16b: TxUnicastPkts */
-#define ROBO_MIB_RX_GOOD_PKTS         0x04 /* 16b: RxGoodPkts */
-#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */
-/* Group 1 */
-#define ROBO_MIB_TX_COLLISION         0x00 /* 16b: TxCollision */
-#define ROBO_MIB_TX_OCTETS_5350       0x02 /* 16b: TxOctets */
-#define ROBO_MIB_RX_FCS_ERRORS_5350   0x04 /* 16b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS_5350  0x06 /* 16b: RxGoodOctets */
-
-/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */
-#define ROBO_QOS_CTRL                 0x00 /* 16b: QoS Control Register */
-#define ROBO_QOS_LOCAL_WEIGHT_CTRL    0x10 /* 8b: Local HQ/LQ Weight Register*/
-#define ROBO_QOS_CPU_WEIGHT_CTRL      0x12 /* 8b: CPU HQ/LQ Weight Register*/
-#define ROBO_QOS_PAUSE_ENA            0x13 /* 16b: Qos Pause Enable Register*/
-#define ROBO_QOS_PRIO_THRESHOLD       0x15 /* 8b: Priority Threshold Register*/
-#define ROBO_QOS_RESERVED             0x16 /* 8b: Qos Reserved Register */
-
-/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */
-typedef struct _ROBO_VLAN_CTRL0_STRUC
-{
-    unsigned char   frameControlP:2;    /* 802.1P frame control */
-    unsigned char   frameControlQ:2;    /* 802.1Q frame control */
-    unsigned char   dropMissedVID:1;    /* enable drop missed VID packet */
-    unsigned char   vidMacHash:1;       /* VID_MAC hash enable */
-    unsigned char   vidMacCheck:1;      /* VID_MAC check enable */
-    unsigned char   VLANen:1;           /* 802.1Q VLAN enable */
-} ROBO_VLAN_CTRL0_STRUC;
-#define VLAN_TABLE_WRITE 1              /* for read/write state in table access reg */
-#define VLAN_TABLE_READ 0               /* for read/write state in table access reg */
-#define VLAN_ID_HIGH_BITS 0             /* static high bits in table access reg */
-#define VLAN_ID_MAX 255                 /* max VLAN id */
-#define VLAN_ID_MAX5350 15              /* max VLAN id (5350) */
-#define VLAN_ID_MASK VLAN_ID_MAX        /* VLAN id mask */
-#ifdef BCM5380
-#define VLAN_UNTAG_SHIFT 13             /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000000             /* valid bit in write reg */
-#else
-#define VLAN_UNTAG_SHIFT 7              /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000               /* valid bit in write reg */
-/* corresponding values for 5350 */
-#define VLAN_UNTAG_SHIFT_5350 6         /* for postioning untag bits in write reg */
-#define VLAN_VALID_5350 0x00100000      /* valid bit in write reg */
-#endif
-typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC
-{
-    unsigned char   VLANid:8;           /* VLAN ID (low 8 bits) */
-    unsigned char   VLANidHi:4;         /* VLAN ID (fixed upper portion) */
-    unsigned char   readWriteState:1;   /* read/write state (write = 1) */
-    volatile unsigned char   readWriteEnable:1;  /* table read/write enable */
-    unsigned char   rsvd:2;             /* reserved */
-} ROBO_VLAN_TABLE_ACCESS_STRUC;
-#ifdef BCM5380
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
-    unsigned int    VLANgroup:13;/* VLAN group mask */
-    unsigned int    VLANuntag:13;/* VLAN untag enable mask */
-    unsigned char   valid:1;     /* valid */
-    unsigned char   rsvd:5;      /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-#else
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
-    unsigned char   VLANgroup:7;         /* VLAN group mask */
-    unsigned char   VLANuntag:7;         /* VLAN untag enable mask */
-    unsigned char   valid:1;             /* valid */
-    unsigned char   rsvd:1;              /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
-{
-    unsigned char   VLANgroup:6;         /* VLAN group mask */
-    unsigned char   VLANuntag:6;         /* VLAN untag enable mask */
-    unsigned char   highVID:8;           /* upper bits of vid */
-    unsigned char   valid:1;             /* valid */
-    unsigned int    rsvd:11;             /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC_5350;
-#endif
-#define ROBO_VLAN_CTRL0             0x00 /* 8b: VLAN Control 0 Register */
-#define ROBO_VLAN_CTRL1             0x01 /* 8b: VLAN Control 1 Register */
-#define ROBO_VLAN_CTRL2             0x02 /* 8b: VLAN Control 2 Register */
-#define ROBO_VLAN_CTRL3             0x03 /* 8b: VLAN Control 3 Register */
-#define ROBO_VLAN_CTRL4             0x04 /* 8b: VLAN Control 4 Register */
-#define ROBO_VLAN_CTRL5             0x05 /* 8b: VLAN Control 5 Register */
-#define ROBO_VLAN_TABLE_ACCESS      0x08 /* 14b: VLAN Table Access Register */
-#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */
-#define ROBO_VLAN_WRITE             0x0a /* 15b: VLAN Write Register */
-#define ROBO_VLAN_WRITE_5350        0x08 /* 15b: VLAN Write Register (5350) */
-#define ROBO_VLAN_READ              0x0c /* 15b: VLAN Read Register */
-#define ROBO_VLAN_PORT0_DEF_TAG     0x10 /* 16b: VLAN Port 0 Default Tag Register */
-#define ROBO_VLAN_PORT1_DEF_TAG     0x12 /* 16b: VLAN Port 1 Default Tag Register */
-#define ROBO_VLAN_PORT2_DEF_TAG     0x14 /* 16b: VLAN Port 2 Default Tag Register */
-#define ROBO_VLAN_PORT3_DEF_TAG     0x16 /* 16b: VLAN Port 3 Default Tag Register */
-#define ROBO_VLAN_PORT4_DEF_TAG     0x18 /* 16b: VLAN Port 4 Default Tag Register */
-#define ROBO_VLAN_PORTMII_DEF_TAG   0x1a /* 16b: VLAN Port MII Default Tag Register */
-/* 5380 only */
-#define ROBO_VLAN_PORT5_DEF_TAG     0x1a /* 16b: VLAN Port 5 Default Tag Register */
-#define ROBO_VLAN_PORT6_DEF_TAG     0x1c /* 16b: VLAN Port 6 Default Tag Register */
-#define ROBO_VLAN_PORT7_DEF_TAG     0x1e /* 16b: VLAN Port 7 Default Tag Register */
-
-/* obsolete */
-#define ROBO_VLAN_PORT0_CTRL       0x00 /* 16b: Port 0 VLAN  Register */
-#define ROBO_VLAN_PORT1_CTRL       0x02 /* 16b: Port 1 VLAN  Register */
-#define ROBO_VLAN_PORT2_CTRL       0x04 /* 16b: Port 2 VLAN  Register */
-#define ROBO_VLAN_PORT3_CTRL       0x06 /* 16b: Port 3 VLAN  Register */
-#define ROBO_VLAN_PORT4_CTRL       0x08 /* 16b: Port 4 VLAN  Register */
-#define ROBO_VLAN_IM_PORT_CTRL     0x10 /* 16b: Inverse MII Port VLAN Reg */
-#define ROBO_VLAN_SMP_PORT_CTRL    0x12 /* 16b: Serial Port VLAN  Register */
-#define ROBO_VLAN_PORTSPI_DEF_TAG  0x1c /* 16b: VLAN Port SPI Default Tag Register */
-#define ROBO_VLAN_PRIORITY_REMAP   0x20 /* 24b: VLAN Priority Re-Map Register */
-
-#ifndef _CFE_
-#pragma pack()
-#endif
-
-
-#endif /* !__BCM535M_H_ */
-
-
-
-
-
diff --git a/package/system/utils/robocfg/src/robocfg.c b/package/system/utils/robocfg/src/robocfg.c
deleted file mode 100644
index 7a4094dd41..0000000000
--- a/package/system/utils/robocfg/src/robocfg.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * Broadcom BCM5325E/536x switch configuration utility
- *
- * Copyright (C) 2005 Oleg I. Vdovikin
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  
- * 02110-1301, USA.
- */
- 
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/param.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-
-/* linux stuff */
-typedef u_int64_t u64;
-typedef u_int32_t u32;
-typedef u_int16_t u16;
-typedef u_int8_t u8;
-
-#include <linux/if.h>
-#include <linux/sockios.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-
-#include "etc53xx.h"
-#define ROBO_PHY_ADDR	0x1E	/* robo switch phy address */
-
-/* MII registers */
-#define REG_MII_PAGE	0x10	/* MII Page register */
-#define REG_MII_ADDR	0x11	/* MII Address register */
-#define REG_MII_DATA0	0x18	/* MII Data register 0 */
-
-#define REG_MII_PAGE_ENABLE	1
-#define REG_MII_ADDR_WRITE	1
-#define REG_MII_ADDR_READ	2
-
-/* Private et.o ioctls */
-#define SIOCGETCPHYRD           (SIOCDEVPRIVATE + 9)
-#define SIOCSETCPHYWR           (SIOCDEVPRIVATE + 10)
-
-typedef struct {
-	struct ifreq ifr;
-	int fd;
-	int et;			/* use private ioctls */
-} robo_t;
-
-static u16 mdio_read(robo_t *robo, u16 phy_id, u8 reg)
-{
-	if (robo->et) {
-		int args[2] = { reg };
-		
-		if (phy_id != ROBO_PHY_ADDR) {
-			fprintf(stderr,
-				"Access to real 'phy' registers unavaliable.\n"
-				"Upgrade kernel driver.\n");
-
-			return 0xffff;
-		}
-	
-		robo->ifr.ifr_data = (caddr_t) args;
-		if (ioctl(robo->fd, SIOCGETCPHYRD, (caddr_t)&robo->ifr) < 0) {
-			perror("SIOCGETCPHYRD");
-			exit(1);
-		}
-	
-		return args[1];
-	} else {
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data;
-		mii->phy_id = phy_id;
-		mii->reg_num = reg;
-		if (ioctl(robo->fd, SIOCGMIIREG, &robo->ifr) < 0) {
-			perror("SIOCGMIIREG");
-			exit(1);
-		}
-		return mii->val_out;
-	}
-}
-
-static void mdio_write(robo_t *robo, u16 phy_id, u8 reg, u16 val)
-{
-	if (robo->et) {
-		int args[2] = { reg, val };
-
-		if (phy_id != ROBO_PHY_ADDR) {
-			fprintf(stderr,
-				"Access to real 'phy' registers unavaliable.\n"
-				"Upgrade kernel driver.\n");
-			return;
-		}
-		
-		robo->ifr.ifr_data = (caddr_t) args;
-		if (ioctl(robo->fd, SIOCSETCPHYWR, (caddr_t)&robo->ifr) < 0) {
-			perror("SIOCGETCPHYWR");
-			exit(1);
-		}
-	} else {
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data;
-		mii->phy_id = phy_id;
-		mii->reg_num = reg;
-		mii->val_in = val;
-		if (ioctl(robo->fd, SIOCSMIIREG, &robo->ifr) < 0) {
-			perror("SIOCSMIIREG");
-			exit(1);
-		}
-	}
-}
-
-static int robo_reg(robo_t *robo, u8 page, u8 reg, u8 op)
-{
-	int i = 3;
-	
-	/* set page number */
-	mdio_write(robo, ROBO_PHY_ADDR, REG_MII_PAGE, 
-		(page << 8) | REG_MII_PAGE_ENABLE);
-	
-	/* set register address */
-	mdio_write(robo, ROBO_PHY_ADDR, REG_MII_ADDR, 
-		(reg << 8) | op);
-
-	/* check if operation completed */
-	while (i--) {
-		if ((mdio_read(robo, ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
-			return 0;
-	}
-
-	fprintf(stderr, "robo_reg: timeout\n");
-	exit(1);
-	
-	return 0;
-}
-
-static void robo_read(robo_t *robo, u8 page, u8 reg, u16 *val, int count)
-{
-	int i;
-	
-	robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-	
-	for (i = 0; i < count; i++)
-		val[i] = mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + i);
-}
-
-static u16 robo_read16(robo_t *robo, u8 page, u8 reg)
-{
-	robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-	
-	return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0);
-}
-
-static u32 robo_read32(robo_t *robo, u8 page, u8 reg)
-{
-	robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-	
-	return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0) +
-		(mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
-}
-
-static void robo_write16(robo_t *robo, u8 page, u8 reg, u16 val16)
-{
-	/* write data */
-	mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val16);
-
-	robo_reg(robo, page, reg, REG_MII_ADDR_WRITE);
-}
-
-static void robo_write32(robo_t *robo, u8 page, u8 reg, u32 val32)
-{
-	/* write data */
-	mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
-	mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
-	
-	robo_reg(robo, page, reg, REG_MII_ADDR_WRITE);
-}
-
-/* checks that attached switch is 5325E/5350 */
-static int robo_vlan5350(robo_t *robo)
-{
-	/* set vlan access id to 15 and read it back */
-	u16 val16 = 15;
-	robo_write16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-	
-	/* 5365 will refuse this as it does not have this reg */
-	return (robo_read16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
-}
-
-u8 port[6] = { 0, 1, 2, 3, 4, 8 };
-char ports[6] = { 'W', '4', '3', '2', '1', 'C' };
-char *rxtx[4] = { "enabled", "rx_disabled", "tx_disabled", "disabled" };
-char *stp[8] = { "none", "disable", "block", "listen", "learn", "forward", "6", "7" };
-
-struct {
-	char *name;
-	u16 bmcr;
-} media[5] = { { "auto", BMCR_ANENABLE | BMCR_ANRESTART }, 
-	{ "10HD", 0 }, { "10FD", BMCR_FULLDPLX },
-	{ "100HD", BMCR_SPEED100 }, { "100FD", BMCR_SPEED100 | BMCR_FULLDPLX } };
-
-struct {
-	char *name;
-	u16 value;
-} mdix[3] = { { "auto", 0x0000 }, { "on", 0x1800 }, { "off", 0x0800 } };
-
-void usage()
-{
-	fprintf(stderr, "Broadcom BCM5325E/536x switch configuration utility\n"
-		"Copyright (C) 2005 Oleg I. Vdovikin\n\n"
-		"This program is distributed in the hope that it will be useful,\n"
-		"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-		"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-		"GNU General Public License for more details.\n\n");
-
-	fprintf(stderr, "Usage: robocfg <op> ... <op>\n"
-			"Operations are as below:\n"
-			"\tshow\n"
-			"\tswitch <enable|disable>\n"
-			"\tport <port_number> [state <%s|%s|%s|%s>]\n\t\t[stp %s|%s|%s|%s|%s|%s] [tag <vlan_tag>]\n"
-			"\t\t[media %s|%s|%s|%s|%s] [mdi-x %s|%s|%s]\n"
-			"\tvlan <vlan_number> [ports <ports_list>]\n"
-			"\tvlans <enable|disable|reset>\n\n"
-			"\tports_list should be one argument, space separated, quoted if needed,\n"
-			"\tport number could be followed by 't' to leave packet vlan tagged (CPU \n"
-			"\tport default) or by 'u' to untag packet (other ports default) before \n"
-			"\tbringing it to the port, '*' is ignored\n"
-			"\nSamples:\n"
-			"1) ASUS WL-500g Deluxe stock config (eth0 is WAN, eth0.1 is LAN):\n"
-			"robocfg switch disable vlans enable reset vlan 0 ports \"0 5u\" vlan 1 ports \"1 2 3 4 5t\""
-			" port 0 state enabled stp none switch enable\n"
-			"2) WRT54g, WL-500g Deluxe OpenWRT config (vlan0 is LAN, vlan1 is WAN):\n"
-			"robocfg switch disable vlans enable reset vlan 0 ports \"1 2 3 4 5t\" vlan 1 ports \"0 5t\""
-			" port 0 state enabled stp none switch enable\n",
-			rxtx[0], rxtx[1], rxtx[2], rxtx[3], stp[0], stp[1], stp[2], stp[3], stp[4], stp[5],
-			media[0].name, media[1].name, media[2].name, media[3].name, media[4].name,
-			mdix[0].name, mdix[1].name, mdix[2].name);
-}
-
-static robo_t robo;
-int bcm53xx_probe(const char *dev)
-{
-	struct ethtool_drvinfo info;
-	unsigned int phyid;
-	int ret;
-
-	fprintf(stderr, "probing %s\n", dev);
-
-	strcpy(robo.ifr.ifr_name, dev);
-	memset(&info, 0, sizeof(info));
-	info.cmd = ETHTOOL_GDRVINFO;
-	robo.ifr.ifr_data = (caddr_t)&info;
-	ret = ioctl(robo.fd, SIOCETHTOOL, (caddr_t)&robo.ifr);
-	if (ret < 0) {
-		perror("SIOCETHTOOL");
-		return ret;
-	}
-
-	if (	strcmp(info.driver, "et0") &&
-		strcmp(info.driver, "b44") &&
-		strcmp(info.driver, "bcm63xx_enet") ) {
-			fprintf(stderr, "driver not supported %s\n", info.driver);
-			return -ENOSYS;
-	}
-
-	/* try access using MII ioctls - get phy address */
-	robo.et = 0;
-	if (ioctl(robo.fd, SIOCGMIIPHY, &robo.ifr) < 0)
-		robo.et = 1;
-
-	if (robo.et) {
-		unsigned int args[2] = { 2 };
-		
-		robo.ifr.ifr_data = (caddr_t) args;
-		ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr);
-		if (ret < 0) {
-			perror("SIOCGETCPHYRD");
-			return ret;
-		}
-		phyid = args[1] & 0xffff;
-	
-		args[0] = 3;
-		robo.ifr.ifr_data = (caddr_t) args;
-		ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr);
-		if (ret < 0) {
-			perror("SIOCGETCPHYRD");
-			return ret;
-		}
-		phyid |= args[1] << 16;
-	} else {
-		struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo.ifr.ifr_data;
-		mii->phy_id = ROBO_PHY_ADDR;
-		mii->reg_num = 2;
-		ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr);
-		if (ret < 0) {
-			perror("SIOCGMIIREG");
-			return ret;
-		}
-		phyid = mii->val_out & 0xffff;
-
-		mii->phy_id = ROBO_PHY_ADDR;
-		mii->reg_num = 3;
-		ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr);
-		if (ret < 0) {
-			perror("SIOCGMIIREG");
-			return ret;
-		}
-		phyid |= mii->val_out << 16;
-	}
-
-	if (phyid == 0xffffffff || phyid == 0x55210022) {
-		perror("phyid");
-		return -EIO;
-	}
-	
-	return 0;
-}
-
-int
-main(int argc, char *argv[])
-{
-	u16 val16;
-	u16 mac[3];
-	int i = 0, j;
-	int robo5350 = 0;
-	u32 phyid;
-	
-	if ((robo.fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
-		perror("socket");
-		exit(1);
-	}
-
-	if (bcm53xx_probe("eth1")) {
-		if (bcm53xx_probe("eth0")) {
-			perror("bcm53xx_probe");
-			exit(1);
-		}
-	}
-
-	robo5350 = robo_vlan5350(&robo);
-	
-	for (i = 1; i < argc;) {
-		if (strcasecmp(argv[i], "port") == 0 && (i + 1) < argc)
-		{
-			int index = atoi(argv[++i]);
-			/* read port specs */
-			while (++i < argc) {
-				if (strcasecmp(argv[i], "state") == 0 && ++i < argc) {
-					for (j = 0; j < 4 && strcasecmp(argv[i], rxtx[j]); j++);
-					if (j < 4) {
-						/* change state */
-						robo_write16(&robo,ROBO_CTRL_PAGE, port[index],
-							(robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(3 << 0)) | (j << 0));
-					} else {
-						fprintf(stderr, "Invalid state '%s'.\n", argv[i]);
-						exit(1);
-					}
-				} else
-				if (strcasecmp(argv[i], "stp") == 0 && ++i < argc) {
-					for (j = 0; j < 8 && strcasecmp(argv[i], stp[j]); j++);
-					if (j < 8) {
-						/* change stp */
-						robo_write16(&robo,ROBO_CTRL_PAGE, port[index],
-							(robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(7 << 5)) | (j << 5));
-					} else {
-						fprintf(stderr, "Invalid stp '%s'.\n", argv[i]);
-						exit(1);
-					}
-				} else
-				if (strcasecmp(argv[i], "media") == 0 && ++i < argc) {
-					for (j = 0; j < 5 && strcasecmp(argv[i], media[j].name); j++);
-					if (j < 5) {
-                                    		mdio_write(&robo, port[index], MII_BMCR, media[j].bmcr);
-					} else {
-						fprintf(stderr, "Invalid media '%s'.\n", argv[i]);
-						exit(1);
-					}
-				} else
-				if (strcasecmp(argv[i], "mdi-x") == 0 && ++i < argc) {
-					for (j = 0; j < 3 && strcasecmp(argv[i], mdix[j].name); j++);
-					if (j < 3) {
-                                    		mdio_write(&robo, port[index], 0x1c, mdix[j].value |
-						    (mdio_read(&robo, port[index], 0x1c) & ~0x1800));
-					} else {
-						fprintf(stderr, "Invalid mdi-x '%s'.\n", argv[i]);
-						exit(1);
-					}
-				} else
-				if (strcasecmp(argv[i], "tag") == 0 && ++i < argc) {
-					j = atoi(argv[i]);
-					/* change vlan tag */
-					robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (index << 1), j);
-				} else break;
-			}
-		} else
-		if (strcasecmp(argv[i], "vlan") == 0 && (i + 1) < argc)
-		{
-			int index = atoi(argv[++i]);
-			while (++i < argc) {
-				if (strcasecmp(argv[i], "ports") == 0 && ++i < argc) {
-					char *ports = argv[i];
-					int untag = 0;
-					int member = 0;
-					
-					while (*ports >= '0' && *ports <= '9') {
-						j = *ports++ - '0';
-						member |= 1 << j;
-						
-						/* untag if needed, CPU port requires special handling */
-						if (*ports == 'u' || (j != 5 && (*ports == ' ' || *ports == 0))) 
-						{
-							untag |= 1 << j;
-							if (*ports) ports++;
-							/* change default vlan tag */
-							robo_write16(&robo, ROBO_VLAN_PAGE, 
-								ROBO_VLAN_PORT0_DEF_TAG + (j << 1), index);
-						} else 
-						if (*ports == '*' || *ports == 't' || *ports == ' ') ports++;
-						else break;
-						
-						while (*ports == ' ') ports++;
-					}
-					
-					if (*ports) {
-						fprintf(stderr, "Invalid ports '%s'.\n", argv[i]);
-						exit(1);
-					} else {
-						/* write config now */
-						val16 = (index) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
-						if (robo5350) {
-							robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
-								(1 << 20) /* valid */ | (untag << 6) | member);
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-						} else {
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
-								(1 << 14)  /* valid */ | (untag << 7) | member);
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-						}
-					}
-				} else break;
-			}
-		} else
-		if (strcasecmp(argv[i], "switch") == 0 && (i + 1) < argc)
-		{
-			/* enable/disable switching */
-			robo_write16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE,
-				(robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) |
-				(*argv[++i] == 'e' ? 2 : 0));
-			i++;
-		} else
-		if (strcasecmp(argv[i], "vlans") == 0 && (i + 1) < argc)
-		{
-			while (++i < argc) {
-				if (strcasecmp(argv[i], "reset") == 0) {
-					/* reset vlan validity bit */
-					for (j = 0; j <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) 
-					{
-						/* write config now */
-						val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
-						if (robo5350) {
-							robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-						} else {
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
-							robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-						}
-					}
-				} else 
-				if (strcasecmp(argv[i], "enable") == 0 || strcasecmp(argv[i], "disable") == 0) 
-				{
-					int disable = (*argv[i] == 'd') || (*argv[i] == 'D');
-					/* enable/disable vlans */
-					robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
-						(1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
-
-					robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
-						(1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
-
-					robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
-						(1 << 6) /* drop invalid VID frames */);
-
-					robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
-						(1 << 3) /* drop miss V table frames */);
-
-				} else break;
-			}
-		} else
-		if (strcasecmp(argv[i], "show") == 0)
-		{
-			break;
-		} else {
-			fprintf(stderr, "Invalid option %s\n", argv[i]);
-			usage();
-			exit(1);
-		}
-	}
-
-	if (i == argc) {
-		if (argc == 1) usage();
-		return 0;
-	}
-	
-	/* show config */
-		
-	printf("Switch: %sabled\n", robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2 ? "en" : "dis");
-
-	for (i = 0; i < 6; i++) {
-		printf(robo_read16(&robo, ROBO_STAT_PAGE, ROBO_LINK_STAT_SUMMARY) & (1 << port[i]) ?
-			"Port %d(%c): %s%s " : "Port %d(%c):  DOWN ", i, ports[i],
-			robo_read16(&robo, ROBO_STAT_PAGE, ROBO_SPEED_STAT_SUMMARY) & (1 << port[i]) ? "100" : " 10",
-			robo_read16(&robo, ROBO_STAT_PAGE, ROBO_DUPLEX_STAT_SUMMARY) & (1 << port[i]) ? "FD" : "HD");
-		
-		val16 = robo_read16(&robo, ROBO_CTRL_PAGE, port[i]);
-		
-		printf("%s stp: %s vlan: %d ", rxtx[val16 & 3], stp[(val16 >> 5) & 7],
-			robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (i << 1)));
-			
-		robo_read(&robo, ROBO_STAT_PAGE, ROBO_LSA_PORT0 + port[i] * 6, mac, 3);
-		
-		printf("mac: %02x:%02x:%02x:%02x:%02x:%02x\n",
-			mac[2] >> 8, mac[2] & 255, mac[1] >> 8, mac[1] & 255, mac[0] >> 8, mac[0] & 255);
-	}
-	
-	val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0);
-	
-	printf("VLANs: %s %sabled%s%s\n", 
-		robo5350 ? "BCM5325/535x" : "BCM536x",
-		(val16 & (1 << 7)) ? "en" : "dis", 
-		(val16 & (1 << 6)) ? " mac_check" : "", 
-		(val16 & (1 << 5)) ? " mac_hash" : "");
-	
-	/* scan VLANs */
-	for (i = 0; i <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); i++) {
-		/* issue read */
-		val16 = (i) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
-		
-		if (robo5350) {
-			u32 val32;
-			robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-			/* actual read */
-			val32 = robo_read32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ);
-			if ((val32 & (1 << 20)) /* valid */) {
-				printf("vlan%d:", i);
-				for (j = 0; j < 6; j++) {
-					if (val32 & (1 << j)) {
-						printf(" %d%s", j, (val32 & (1 << (j + 6))) ? 
-							(j == 5 ? "u" : "") : "t");
-					}
-				}
-				printf("\n");
-			}
-		} else {
-			robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
-			/* actual read */
-			val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ);
-			if ((val16 & (1 << 14)) /* valid */) {
-				printf("vlan%d:", i);
-				for (j = 0; j < 6; j++) {
-					if (val16 & (1 << j)) {
-						printf(" %d%s", j, (val16 & (1 << (j + 7))) ? 
-							(j == 5 ? "u" : "") : "t");
-					}
-				}
-				printf("\n");
-			}
-		}
-	}
-	
-	return (0);
-}
diff --git a/package/system/utils/usbmode/Makefile b/package/system/utils/usbmode/Makefile
deleted file mode 100644
index 491f3e572f..0000000000
--- a/package/system/utils/usbmode/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=usbmode
-PKG_VERSION:=2013-05-31
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git://git.openwrt.org/project/usbmode.git
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=b62a33af03c39a8970249ce7afe7baec7ea9b91b
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-CMAKE_INSTALL:=1
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-
-PKG_DATA_VERSION:=20121109
-PKG_DATA_URL:=http://www.draisberghof.de/usb_modeswitch
-PKG_DATA_PATH:=usb-modeswitch-data-$(PKG_DATA_VERSION)
-PKG_DATA_FILENAME:=$(PKG_DATA_PATH).tar.bz2
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Download/data
-  FILE:=$(PKG_DATA_FILENAME)
-  URL:=$(PKG_DATA_URL)
-  MD5SUM:=a7d23a03157871013a0d708ab2b1b6df
-endef
-$(eval $(call Download,data))
-
-define Package/usb-modeswitch
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libubox +libblobmsg-json +libusb-1.0
-  TITLE:=USB mode switching utility
-endef
-
-define Build/Prepare
-	$(Build/Prepare/Default)
-	tar xvfj $(DL_DIR)/$(PKG_DATA_FILENAME) -C $(PKG_BUILD_DIR)
-	rm -f \
-		$(PKG_BUILD_DIR)/$(PKG_DATA_PATH)/usb_modeswitch.d/05c6:1000:sVe=GT
-endef
-
-define Package/usb-modeswitch/install
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/usb $(1)/sbin
-	perl $(PKG_BUILD_DIR)/convert-modeswitch.pl \
-		$(PKG_BUILD_DIR)/$(PKG_DATA_PATH)/usb_modeswitch.d/* \
-		> $(1)/etc/usb-mode.json
-	$(CP) ./files/usbmode.hotplug $(1)/etc/hotplug.d/usb/20-usb_mode
-	$(CP) $(PKG_INSTALL_DIR)/usr/sbin/usbmode $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,usb-modeswitch))
diff --git a/package/system/utils/usbmode/files/usbmode.hotplug b/package/system/utils/usbmode/files/usbmode.hotplug
deleted file mode 100644
index 4ef2bd8daa..0000000000
--- a/package/system/utils/usbmode/files/usbmode.hotplug
+++ /dev/null
@@ -1,7 +0,0 @@
-. /lib/functions/procd.sh
-
-procd_open_service "usbmode"
-procd_open_instance
-procd_set_param command "/sbin/usbmode" -s
-procd_close_instance
-procd_close_service
diff --git a/package/system/utils/usbreset/Makefile b/package/system/utils/usbreset/Makefile
deleted file mode 100644
index 75bfd85138..0000000000
--- a/package/system/utils/usbreset/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# Copyright (C) 2011-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=usbreset
-PKG_RELEASE:=2
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/usbreset
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Utility to send a USB port reset to a USB device
-  MAINTAINER:=Jo-Philipp Wich <xm@subsignal.org>
-endef
-
-define Package/usbreset/description
- This package contains the small usbreset utility which
- can be used to send a USB port reset to a USB device -
- useful for debugging or to force re-detection of particular
- devices.
-endef
-
-define Build/Prepare
-	$(INSTALL_DIR) $(PKG_BUILD_DIR)
-	$(INSTALL_DATA) ./src/usbreset.c $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(TARGET_CC) $(TARGET_CFLAGS) -Wall \
-		-o $(PKG_BUILD_DIR)/usbreset $(PKG_BUILD_DIR)/usbreset.c
-endef
-
-define Package/usbreset/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/usbreset $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,usbreset))
diff --git a/package/system/utils/usbreset/src/usbreset.c b/package/system/utils/usbreset/src/usbreset.c
deleted file mode 100644
index 087a14cfa4..0000000000
--- a/package/system/utils/usbreset/src/usbreset.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* usbreset -- send a USB port reset to a USB device */
-
-/*
-
-http://marc.info/?l=linux-usb-users&m=116827193506484&w=2
-
-and needs mounted usbfs filesystem
-
-	sudo mount -t usbfs none /proc/bus/usb
-
-There is a way to suspend a USB device.  In order to use it,
-you must have a kernel with CONFIG_PM_SYSFS_DEPRECATED turned on.  To
-suspend a device, do (as root):
-
-	echo -n 2 >/sys/bus/usb/devices/.../power/state
-
-where the "..." is the ID for your device.  To unsuspend, do the same
-thing but with a "0" instead of the "2" above.
-
-Note that this mechanism is slated to be removed from the kernel within
-the next year.  Hopefully some other mechanism will take its place.
-
-> To reset a
-> device?
-
-Here's a program to do it.  You invoke it as either
-
-	usbreset /proc/bus/usb/BBB/DDD
-or
-	usbreset /dev/usbB.D
-
-depending on how your system is set up, where BBB and DDD are the bus and
-device address numbers.
-
-Alan Stern
-
-*/
-
-#include <stdio.h>
-#include <stdbool.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
-#include <sys/ioctl.h>
-
-#include <linux/usbdevice_fs.h>
-
-
-static char *usbfs = NULL;
-
-struct usbentry {
-	int bus_num;
-	int dev_num;
-	int vendor_id;
-	int product_id;
-	char vendor_name[128];
-	char product_name[128];
-};
-
-
-static bool find_usbfs(void)
-{
-	FILE *mtab;
-
-	char buf[1024], type[32];
-	static char path[1024];
-
-	if ((mtab = fopen("/proc/mounts", "r")) != NULL)
-	{
-		while (fgets(buf, sizeof(buf), mtab))
-		{
-			if (sscanf(buf, "%*s %1023s %31s ", path, type) == 2 &&
-				!strncmp(type, "usbfs", 5))
-			{
-				usbfs = path;
-				break;
-			}
-		}
-
-		fclose(mtab);
-	}
-
-	return !!usbfs;
-}
-
-static FILE * open_devlist(void)
-{
-	char buf[1024];
-	snprintf(buf, sizeof(buf), "%s/devices", usbfs);
-	return fopen(buf, "r");
-}
-
-static void close_devlist(FILE *devs)
-{
-	fclose(devs);
-}
-
-static struct usbentry * parse_devlist(FILE *devs)
-{
-	char buf[1024];
-	static struct usbentry dev;
-
-	memset(&dev, 0, sizeof(dev));
-
-	while (fgets(buf, sizeof(buf), devs))
-	{
-		buf[strlen(buf)-1] = 0;
-
-		switch (buf[0])
-		{
-		case 'T':
-			sscanf(buf, "T: Bus=%d Lev=%*d Prnt=%*d Port=%*d Cnt=%*d Dev#=%d",
-				   &dev.bus_num, &dev.dev_num);
-			break;
-
-		case 'P':
-			sscanf(buf, "P: Vendor=%x ProdID=%x",
-				   &dev.vendor_id, &dev.product_id);
-			break;
-
-		case 'S':
-			if (!strncmp(buf, "S:  Manufacturer=", 17))
-				snprintf(dev.vendor_name, sizeof(dev.vendor_name),
-				         "%s", buf+17);
-			else if (!strncmp(buf, "S:  Product=", 12))
-				snprintf(dev.product_name, sizeof(dev.product_name),
-				         "%s", buf+12);
-			break;
-		}
-
-		if (dev.product_name[0])
-			return &dev;
-	}
-
-	return NULL;
-}
-
-static void list_devices(void)
-{
-	FILE *devs = open_devlist();
-	struct usbentry *dev;
-
-	if (!devs)
-		return;
-
-	while ((dev = parse_devlist(devs)) != NULL)
-	{
-		printf("  Number %03d/%03d  ID %04x:%04x  %s\n",
-			   dev->bus_num, dev->dev_num,
-			   dev->vendor_id, dev->product_id,
-			   dev->product_name);
-	}
-
-	close_devlist(devs);
-}
-
-struct usbentry * find_device(int *bus, int *dev,
-                              int *vid, int *pid,
-                              const char *product)
-{
-	FILE *devs = open_devlist();
-
-	struct usbentry *e, *match = NULL;
-
-	if (!devs)
-		return NULL;
-
-	while ((e = parse_devlist(devs)) != NULL)
-	{
-		if ((bus && (e->bus_num == *bus) && (e->dev_num == *dev)) ||
-			(vid && (e->vendor_id == *vid) && (e->product_id == *pid)) ||
-			(product && !strcasecmp(e->product_name, product)))
-		{
-			match = e;
-			break;
-		}
-	}
-
-	close_devlist(devs);
-
-	return match;
-}
-
-static void reset_device(struct usbentry *dev)
-{
-	int fd;
-	char path[1024];
-
-	snprintf(path, sizeof(path), "%s/%03d/%03d",
-			 usbfs, dev->bus_num, dev->dev_num);
-
-	printf("Resetting %s ... ", dev->product_name);
-
-	if ((fd = open(path, O_WRONLY)) > -1)
-	{
-		if (ioctl(fd, USBDEVFS_RESET, 0) < 0)
-			printf("failed [%s]\n", strerror(errno));
-		else
-			printf("ok\n");
-
-		close(fd);
-	}
-	else
-	{
-		printf("can't open [%s]\n", strerror(errno));
-	}
-}
-
-
-int main(int argc, char **argv)
-{
-	int id1, id2;
-	struct usbentry *dev;
-
-	if (!find_usbfs())
-	{
-		fprintf(stderr, "Unable to find usbfs, is it mounted?\n");
-		return 1;
-	}
-
-	if ((argc == 2) && (sscanf(argv[1], "%3d/%3d", &id1, &id2) == 2))
-	{
-		dev = find_device(&id1, &id2, NULL, NULL, NULL);
-	}
-	else if ((argc == 2) && (sscanf(argv[1], "%4x:%4x", &id1, &id2) == 2))
-	{
-		dev = find_device(NULL, NULL, &id1, &id2, NULL);
-	}
-	else if ((argc == 2) && strlen(argv[1]) < 128)
-	{
-		dev = find_device(NULL, NULL, NULL, NULL, argv[1]);
-	}
-	else
-	{
-		printf("Usage:\n"
-		       "  usbreset PPPP:VVVV - reset by product and vendor id\n"
-		       "  usbreset BBB/DDD   - reset by bus and device number\n"
-		       "  usbreset \"Product\" - reset by product name\n\n"
-		       "Devices:\n");
-		list_devices();
-		return 1;
-	}
-
-	if (!dev)
-	{
-		fprintf(stderr, "No such device found\n");
-		return 1;
-	}
-
-	reset_device(dev);
-	return 0;
-}
diff --git a/package/system/utils/usbutils/Makefile b/package/system/utils/usbutils/Makefile
deleted file mode 100644
index 2cd59ae74c..0000000000
--- a/package/system/utils/usbutils/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2007-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=usbutils
-PKG_VERSION:=006
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=@KERNEL/linux/utils/usb/usbutils
-PKG_MD5SUM:=9d13954981f4adbe3fd02aae6dbfafa9
-
-USB_IDS_VERSION:=2013-01-16
-USB_IDS_MD5SUM:=2a2344907b6344f0935c86efaf9de620
-USB_IDS_FILE:=usb.ids.$(USB_IDS_VERSION).gz
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_MAINTAINER := Felix Fietkau <nbd@openwrt.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/usbutils
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libusb-1.0 +zlib +librt +libpthread
-  TITLE:=USB devices listing utilities
-  URL:=http://www.linux-usb.org/
-endef
-
-define Download/usb_ids
-  FILE:=$(USB_IDS_FILE)
-  URL:=http://mirror2.openwrt.org/sources
-  MD5SUM:=$(USB_IDS_MD5SUM)
-endef
-$(eval $(call Download,usb_ids))
-
-define Build/Prepare
-	$(Build/Prepare/Default)
-	echo '#!/bin/sh' > $(PKG_BUILD_DIR)/update-usbids.sh.in
-	echo 'cp $(DL_DIR)/$(USB_IDS_FILE) usb.ids.gz' >> $(PKG_BUILD_DIR)/update-usbids.sh.in
-endef
-
-define Package/usbutils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/lsusb $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/usb.ids.gz $(1)/usr/share/
-endef
-
-$(eval $(call BuildPackage,usbutils))
diff --git a/package/system/utils/util-linux/Makefile b/package/system/utils/util-linux/Makefile
deleted file mode 100644
index ed2c10f172..0000000000
--- a/package/system/utils/util-linux/Makefile
+++ /dev/null
@@ -1,594 +0,0 @@
-#
-# Copyright (C) 2007-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=util-linux
-PKG_VERSION:=2.21.2
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@KERNEL/linux/utils/$(PKG_NAME)/v2.21
-PKG_MD5SUM:=54ba880f1d66782c2287ee2c898520e9
-
-PKG_LICENSE:=GPLv2 LGPLv2.1 BSD-3c
-PKG_LICENSE_FILES:=COPYING getopt/COPYING libblkid/COPYING libmount/COPYING Documentation/licenses/COPYING.GPLv2 Documentation/licenses/COPYING.LGPLv2.1 libuuid/COPYING Documentation/licenses/COPYING.BSD-3
-
-PKG_BUILD_PARALLEL:=1
-PKG_BUILD_DEPENDS:=libncurses
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/util-linux/Default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  URL:=http://www.kernel.org/pub/linux/utils/util-linux/
-endef
-
-CONFIGURE_ARGS += \
-	--enable-new-mount	\
-	--with-ncurses		\
-	--disable-nls		\
-	--disable-tls		\
-	--without-udev
-
-TARGET_CFLAGS += $(FPIC)
-
-define Build/InstallDev
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		BUILDCC="$(HOSTCC)" \
-		DESTDIR="$(1)" \
-		installdirs install-data
-
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/libblkid/blkid.pc $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/libmount/mount.pc $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/libuuid/uuid.pc $(1)/usr/lib/pkgconfig
-
-	$(INSTALL_DIR) $(1)/usr/include/blkid
-	$(CP) $(PKG_BUILD_DIR)/libblkid/src/blkid.h $(1)/usr/include/blkid
-	$(INSTALL_DIR) $(1)/usr/include/libmount
-	$(CP) $(PKG_BUILD_DIR)/libmount/src/libmount.h $(1)/usr/include/libmount
-	$(INSTALL_DIR) $(1)/usr/include/uuid
-	$(CP) $(PKG_BUILD_DIR)/libuuid/src/uuid.h $(1)/usr/include/uuid
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libblkid/src/.libs/libblkid.{a,so*} $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmount/src/.libs/libmount.{a,so*} $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libuuid/src/.libs/libuuid.{a,so*} $(1)/usr/lib
-endef
-
-define Package/libblkid
-$(call Package/util-linux/Default)
-  DEPENDS:=+libuuid
-  TITLE:=block device id library
-  SECTION:=libs
-  CATEGORY:=Libraries
-endef
-
-define Package/libblkid/description
- The libblkid library is used to identify block devices (disks) as to their
- content (e.g. filesystem type, partitions) as well as extracting additional
- information such as filesystem labels/volume names, partitions, unique
- identifiers/serial numbers...
-endef
-
-define Package/libmount
-$(call Package/util-linux/Default)
-  DEPENDS:=+libblkid
-  TITLE:=mount library
-  SECTION:=libs
-  CATEGORY:=Libraries
-endef
-
-define Package/libmount/description
- The libmount library is used to parse /etc/fstab, /etc/mtab and
- /proc/self/mountinfo files, manage the mtab file, evaluate mount options...
-endef
-
-define Package/libuuid
-$(call Package/util-linux/Default)
-  TITLE:=DCE compatible Universally Unique Identifier library
-  SECTION:=libs
-  CATEGORY:=Libraries
-endef
-
-define Package/libuuid/description
- The UUID library is used to generate unique identifiers for objects
- that may be accessible beyond the local system. This library
- generates UUIDs compatible with those created by the Open Software
- Foundation (OSF) Distributed Computing Environment (DCE) utility.
-endef
-
-define Package/agetty
-$(call Package/util-linux/Default)
-  TITLE:=alternative Linux getty
-  SUBMENU=Terminal
-endef
-
-define Package/agetty/description
- agetty opens a tty port, prompts for a login name and invokes the
- /bin/login command
-endef
-
-define Package/blkid
-$(call Package/util-linux/Default)
-  TITLE:=locate/print block device attributes
-  DEPENDS:= +libblkid
-  SUBMENU=disc
-endef
-
-define Package/blkid/description
- The blkid program is the command-line interface to working with the libblkid
- library.
-endef
-
-define Package/cal
-$(call Package/util-linux/Default)
-  TITLE:=display a calendar
-  DEPENDS:= +libncurses
-endef
-
-define Package/cal/description
- cal displays a simple calendar
-endef
-
-define Package/cfdisk
-$(call Package/util-linux/Default)
-  TITLE:=display or manipulate disk partition table
-  DEPENDS:= +libblkid +libncurses
-  SUBMENU:=disc
-endef
-
-define Package/cfdisk/description
- cfdisk is a curses-based program for partitioning any hard disk drive
-endef
-
-define Package/dmesg
-$(call Package/util-linux/Default)
-  TITLE:=print or control the kernel ring buffer
-endef
-
-define Package/dmesg/description
- dmesg  is used to examine or control the kernel ring buffer
-endef
-
-define Package/fdisk
-$(call Package/util-linux/Default)
-  TITLE:=manipulate disk partition table
-  DEPENDS:= +libblkid
-  SUBMENU=disc
-endef
-
-define Package/fdisk/description
- a menu-driven program for creation and manipulation of partition tables
-endef
-
-define Package/findfs
-$(call Package/util-linux/Default)
-  TITLE:=find a filesystem by label or UUID
-  DEPENDS:= +libblkid
-  SUBMENU=disc
-endef
-
-define Package/findfs/description
- findfs will search the disks in the system looking for a filesystem which has
- a label matching label or a UUID equal to uuid
-endef
-
-define Package/flock
-$(call Package/util-linux/Default)
-  TITLE:=manage locks from shell scripts
-endef
-
-define Package/flock/description
-  manages flock locks from within shell scripts or the command line
-endef
-
-define Package/getopt
-$(call Package/util-linux/Default)
-  TITLE:=parse command options (enhanced)
-endef
-
-define Package/getopt/description
- getopt is used to break up (parse) options in command lines for easy parsing
- by shell procedures, and to check for legal options
-endef
-
-define Package/hwclock
-$(call Package/util-linux/Default)
-  TITLE:=query or set the hardware clock
-endef
-
-define Package/hwclock/description
- hwclock is a tool for accessing the Hardware Clock
-endef
-
-define Package/logger
-$(call Package/util-linux/Default)
-  TITLE:=a shell command interface to the syslog system log module
-endef
-
-define Package/logger/description
- logger makes entries in the system log, it provides a shell command interface
- to the syslog system log module
-endef
-
-define Package/look
-$(call Package/util-linux/Default)
-  TITLE:=display lines beginning with a given string
-endef
-
-define Package/look/description
- look utility displays any lines in file which contain string
-endef
-
-define Package/losetup
-$(call Package/util-linux/Default)
-  TITLE:=set up and control loop devices
-endef
-
-define Package/losetup/description
- losetup is used to associate loop devices with regular files or block devices,
- to detach loop devices and to query the status of a loop device
-endef
-
-define Package/lsblk
-$(call Package/util-linux/Default)
-  TITLE:=list block devices
-  DEPENDS:= +libblkid
-  SUBMENU=disc
-endef
-
-define Package/lsblk/description
- lsblk lists information about all or the specified block devices
-endef
-
-define Package/mcookie
-$(call Package/util-linux/Default)
-  TITLE:=generate magic cookies for xauth
-endef
-
-define Package/mcookie/description
- mcookie generates a 128-bit random hexadecimal number for use with the X
- authority system
-endef
-
-define Package/mount-utils
-$(call Package/util-linux/Default)
-  TITLE:=related (u)mount utilities
-  DEPENDS+= +libmount
-endef
-
-define Package/mount-utils/description
- contains: mount, umount, findmnt
-endef
-
-define Package/namei
-$(call Package/util-linux/Default)
-  TITLE:=follow a pathname until a terminal point is found
-endef
-
-define Package/namei/description
- namei uses its arguments as pathnames to any type of Unix file (symlinks,
- files, directories, and so forth)
-endef
-
-define Package/rename
-$(call Package/util-linux/Default)
-  TITLE:=rename files
-endef
-
-define Package/rename/description
- rename will rename the specified files by replacing the first occurrence of
- expression in their name by replacement
-endef
-
-define Package/partx-utils
-$(call Package/util-linux/Default)
-  TITLE:=inform kernel about the presence and numbering of on-disk partitions
-  DEPENDS:= +libblkid
-  SUBMENU=disc
-endef
-
-define Package/partx-utils/description
- contains partx, addpart, delpart
-endef
-
-define Package/script-utils
-$(call Package/util-linux/Default)
-  TITLE:=make and replay typescript of terminal session
-  SUBMENU=Terminal
-endef
-
-define Package/script-utils/description
- contains: script, scriptreplay
-endef
-
-define Package/setterm
-$(call Package/util-linux/Default)
-  TITLE:=set terminal attributes
-  DEPENDS:= +libncurses
-  SUBMENU:=Terminal
-endef
-
-define Package/setterm/description
- setterm writes to standard output a character string that will invoke the
- specified terminal capabilities
-endef
-
-define Package/sfdisk
-$(call Package/util-linux/Default)
-  TITLE:=partition table manipulator for Linux
-  SUBMENU=disc
-endef
-
-define Package/sfdisk/description
- list the size of a partition, list the partitions on a device, check the
- partitions on a device and repartition a device
-endef
-
-define Package/swap-utils
-$(call Package/util-linux/Default)
-  TITLE:=swap space management utilities
-  DEPENDS+= +libblkid
-  SUBMENU:=disc
-endef
-
-define Package/swap-utils/description
- contains: mkswap, swaplabel, swapon, swapoff
-endef
-
-define Package/uuidd
-$(call Package/util-linux/Default)
-  TITLE:=UUID generation daemon
-  DEPENDS:= +libuuid
-endef
-
-define Package/uuidd/description
- The uuidd daemon is used by the UUID library to generate universally unique
- identifiers (UUIDs), especially time-based UUIDs, in a secure and
- guaranteed-unique fashion, even in the face of large numbers of threads
- running on different CPUs trying to grab UUIDs.
-endef
-
-define Package/uuidgen
-$(call Package/util-linux/Default)
-  TITLE:=create a new UUID value
-  DEPENDS:= +libuuid
-endef
-
-define Package/uuidgen/description
- The uuidgen program creates (and prints) a new universally unique identifier
- (UUID) using the libuuid library. The new UUID can reasonably be considered
- unique among all UUIDs created on the local system, and among UUIDs created on
- other systems in the past and in the future.
-endef
-
-define Package/wall
-$(call Package/util-linux/Default)
-  TITLE:=send a message to everybody's terminal
-  SUBMENU=Terminal
-endef
-
-define Package/wall/description
- wall sends a message to everybody logged in with their mesg permission
- set to yes
-endef
-
-define Package/whereis
-$(call Package/util-linux/Default)
-  TITLE:=locate the binary, source, and manual page files for a command
-endef
-
-define Package/whereis/description
- whereis locates source/binary and manuals sections for specified files
-endef
-
-define Package/wipefs
-$(call Package/util-linux/Default)
-  TITLE:=wipe a signature from a device
-  DEPENDS:= +libblkid
-  SUBMENU:=disc
-endef
-
-define Package/wipefs/description
- wipefs can erase filesystem, raid or partition table signatures (magic
- strings) from the specified device to make the signature invisible for
- libblkid.
-endef
-
-define Package/libblkid/install
-        $(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libblkid/src/.libs/libblkid.so.* $(1)/usr/lib/
-endef
-
-define Package/libmount/install
-        $(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmount/src/.libs/libmount.so.* $(1)/usr/lib/
-endef
-
-define Package/libuuid/install
-        $(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libuuid/src/.libs/libuuid.so.* $(1)/usr/lib/
-endef
-
-define Package/agetty/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/term-utils/agetty $(1)/usr/sbin/
-endef
-
-define Package/blkid/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/blkid $(1)/usr/sbin/
-endef
-
-define Package/cal/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/cal $(1)/usr/bin/
-endef
-
-define Package/cfdisk/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdisk/.libs/cfdisk $(1)/usr/sbin/
-endef
-
-define Package/fdisk/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdisk/.libs/fdisk $(1)/usr/sbin/
-endef
-
-define Package/findfs/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/findfs $(1)/usr/sbin/
-endef
-
-define Package/flock/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/sys-utils/flock $(1)/usr/bin/
-endef
-
-define Package/getopt/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/getopt/getopt $(1)/usr/bin/
-endef
-
-define Package/hwclock/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hwclock/hwclock $(1)/usr/sbin/
-endef
-
-define Package/logger/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/logger $(1)/usr/bin/
-endef
-
-define Package/look/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/look $(1)/usr/bin/
-endef
-
-define Package/losetup/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/sys-utils/losetup $(1)/usr/sbin/
-endef
-
-define Package/lsblk/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/lsblk $(1)/usr/bin/
-endef
-
-define Package/mcookie/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/mcookie $(1)/usr/bin/
-endef
-
-define Package/mount-utils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/sys-utils/.libs/{u,}mount $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/sys-utils/.libs/mountpoint $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/findmnt $(1)/usr/bin/
-endef
-
-define Package/namei/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/namei $(1)/usr/bin/
-endef
-
-define Package/rename/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/rename $(1)/usr/bin/
-endef
-
-define Package/partx-utils/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/partx/.libs/partx $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/partx/addpart $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/partx/delpart $(1)/usr/sbin/
-endef
-
-define Package/script-utils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/term-utils/script $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/term-utils/scriptreplay $(1)/usr/bin/
-endef
-
-define Package/setterm/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/term-utils/setterm $(1)/usr/bin/
-endef
-
-define Package/sfdisk/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdisk/sfdisk $(1)/usr/sbin/
-endef
-
-define Package/swap-utils/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/disk-utils/.libs/mkswap $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/disk-utils/.libs/swaplabel $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/sys-utils/.libs/swapon $(1)/usr/sbin/
-	ln -sf swapon $(1)/usr/sbin/swapoff
-endef
-
-define Package/uuidd/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/uuidd $(1)/usr/sbin/
-endef
-
-define Package/uuidgen/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/uuidgen $(1)/usr/bin/
-endef
-
-define Package/wall/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/term-utils/wall $(1)/usr/bin/
-endef
-
-define Package/whereis/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/whereis $(1)/usr/bin/
-endef
-
-define Package/wipefs/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/misc-utils/.libs/wipefs $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,libblkid))
-$(eval $(call BuildPackage,libmount))
-$(eval $(call BuildPackage,libuuid))
-$(eval $(call BuildPackage,agetty))
-$(eval $(call BuildPackage,blkid))
-$(eval $(call BuildPackage,cal))
-$(eval $(call BuildPackage,cfdisk))
-$(eval $(call BuildPackage,dmesg))
-$(eval $(call BuildPackage,fdisk))
-$(eval $(call BuildPackage,findfs))
-$(eval $(call BuildPackage,flock))
-$(eval $(call BuildPackage,getopt))
-$(eval $(call BuildPackage,hwclock))
-$(eval $(call BuildPackage,logger))
-$(eval $(call BuildPackage,look))
-$(eval $(call BuildPackage,losetup))
-$(eval $(call BuildPackage,lsblk))
-$(eval $(call BuildPackage,mcookie))
-$(eval $(call BuildPackage,mount-utils))
-$(eval $(call BuildPackage,namei))
-$(eval $(call BuildPackage,rename))
-$(eval $(call BuildPackage,partx-utils))
-$(eval $(call BuildPackage,script-utils))
-$(eval $(call BuildPackage,setterm))
-$(eval $(call BuildPackage,sfdisk))
-$(eval $(call BuildPackage,swap-utils))
-$(eval $(call BuildPackage,uuidd))
-$(eval $(call BuildPackage,uuidgen))
-$(eval $(call BuildPackage,wall))
-$(eval $(call BuildPackage,whereis))
-$(eval $(call BuildPackage,wipefs))
diff --git a/package/system/utils/util-linux/patches/000-compile.patch b/package/system/utils/util-linux/patches/000-compile.patch
deleted file mode 100644
index b7cc18b40c..0000000000
--- a/package/system/utils/util-linux/patches/000-compile.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/misc-utils/cal.c
-+++ b/misc-utils/cal.c
-@@ -291,41 +291,6 @@ main(int argc, char **argv) {
- 	}
- #endif
- 
--/*
-- * The traditional Unix cal utility starts the week at Sunday,
-- * while ISO 8601 starts at Monday. We read the start day from
-- * the locale database, which can be overridden with the
-- * -s (Sunday) or -m (Monday) options.
-- */
--#if HAVE_DECL__NL_TIME_WEEK_1STDAY
--	/*
--	 * You need to use 2 locale variables to get the first day of the week.
--	 * This is needed to support first_weekday=2 and first_workday=1 for
--	 * the rare case where working days span across 2 weeks.
--	 * This shell script shows the combinations and calculations involved:
--	 *
--	 * for LANG in en_US ru_RU fr_FR csb_PL POSIX; do
--	 *   printf "%s:\t%s + %s -1 = " $LANG $(locale week-1stday first_weekday)
--	 *   date -d"$(locale week-1stday) +$(($(locale first_weekday)-1))day" +%w
--	 * done
--	 *
--	 * en_US:  19971130 + 1 -1 = 0  #0 = sunday
--	 * ru_RU:  19971130 + 2 -1 = 1
--	 * fr_FR:  19971201 + 1 -1 = 1
--	 * csb_PL: 19971201 + 2 -1 = 2
--	 * POSIX:  19971201 + 7 -1 = 0
--	 */
--	{
--		int wfd;
--		union { unsigned int word; char *string; } val;
--		val.string = nl_langinfo(_NL_TIME_WEEK_1STDAY);
--
--		wfd = val.word;
--		wfd = day_in_week(wfd % 100, (wfd / 100) % 100, wfd / (100 * 100));
--		weekstart = (wfd + *nl_langinfo(_NL_TIME_FIRST_WEEKDAY) - 1) % 7;
--	}
--#endif
--
- 	yflag = 0;
- 	while ((ch = getopt_long(argc, argv, "13mjsyVh", longopts, NULL)) != -1)
- 		switch(ch) {
diff --git a/package/system/utils/util-linux/patches/001-no-printf-alloc.patch b/package/system/utils/util-linux/patches/001-no-printf-alloc.patch
deleted file mode 100644
index e3f048ab3c..0000000000
--- a/package/system/utils/util-linux/patches/001-no-printf-alloc.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-for systems that don't support latest POSIX standard: %as
-
-https://bugs.gentoo.org/406303
-
---- a/configure.ac
-+++ b/configure.ac
-@@ -688,7 +688,6 @@ AC_ARG_ENABLE([libmount],
- UL_BUILD_INIT([libmount])
- UL_REQUIRES_LINUX([libmount])
- UL_REQUIRES_BUILD([libmount], [libblkid])
--UL_REQUIRES_HAVE([libmount], [scanf_alloc_modifier], [scanf string alloc modifier])
- AM_CONDITIONAL(BUILD_LIBMOUNT, test "x$build_libmount" = xyes)
- 
- AC_SUBST([LIBMOUNT_VERSION])
---- a/libmount/src/tab_parse.c
-+++ b/libmount/src/tab_parse.c
-@@ -22,6 +22,10 @@
- #include "pathnames.h"
- #include "strutils.h"
- 
-+#ifndef HAVE_SCANF_MS_MODIFIER
-+# define UL_SCNsA "%s"
-+#endif
-+
- static inline char *skip_spaces(char *s)
- {
- 	assert(s);
-@@ -61,16 +65,31 @@ static int mnt_parse_table_line(struct l
- 	int rc, n = 0, xrc;
- 	char *src = NULL, *fstype = NULL, *optstr = NULL;
- 
-+#ifndef HAVE_SCANF_MS_MODIFIER
-+	size_t len = strlen(s) + 1;
-+	src = malloc(len);
-+	fstype = malloc(len);
-+	fs->target = malloc(len);
-+	optstr = malloc(len);
-+#endif
-+
- 	rc = sscanf(s,	UL_SCNsA" "	/* (1) source */
- 			UL_SCNsA" "	/* (2) target */
- 			UL_SCNsA" "	/* (3) FS type */
- 			UL_SCNsA" "	/* (4) options */
- 			"%n",		/* byte count */
- 
-+#ifdef HAVE_SCANF_MS_MODIFIER
- 			&src,
- 			&fs->target,
- 			&fstype,
- 			&optstr,
-+#else
-+			src,
-+			fs->target,
-+			fstype,
-+			optstr,
-+#endif
- 			&n);
- 	xrc = rc;
- 
-@@ -136,6 +155,16 @@ static int mnt_parse_mountinfo_line(stru
- 	unsigned int maj, min;
- 	char *fstype = NULL, *src = NULL, *p;
- 
-+#ifndef HAVE_SCANF_MS_MODIFIER
-+	size_t len = strlen(s) + 1;
-+	fs->root = malloc(len);
-+	fs->target = malloc(len);
-+	fs->vfs_optstr = malloc(len);
-+	fs->fs_optstr = malloc(len);
-+	fstype = malloc(len);
-+	src = malloc(len);
-+#endif
-+
- 	rc = sscanf(s,	"%u "		/* (1) id */
- 			"%u "		/* (2) parent */
- 			"%u:%u "	/* (3) maj:min */
-@@ -147,9 +176,15 @@ static int mnt_parse_mountinfo_line(stru
- 			&fs->id,
- 			&fs->parent,
- 			&maj, &min,
-+#ifdef HAVE_SCANF_MS_MODIFIER
- 			&fs->root,
- 			&fs->target,
- 			&fs->vfs_optstr,
-+#else
-+			fs->root,
-+			fs->target,
-+			fs->vfs_optstr,
-+#endif
- 			&end);
- 
- 	if (rc >= 7 && end > 0)
-@@ -167,9 +202,15 @@ static int mnt_parse_mountinfo_line(stru
- 			UL_SCNsA" "	/* (9) source */
- 			UL_SCNsA,	/* (10) fs options (fs specific) */
- 
-+#ifdef HAVE_SCANF_MS_MODIFIER
- 			&fstype,
- 			&src,
- 			&fs->fs_optstr);
-+#else
-+			fstype,
-+			src,
-+			fs->fs_optstr);
-+#endif
- 
- 	if (rc >= 10) {
- 		fs->flags |= MNT_FS_KERNEL;
diff --git a/package/system/utils/util-linux/patches/002-fix-endianess.patch b/package/system/utils/util-linux/patches/002-fix-endianess.patch
deleted file mode 100644
index 4c59932cda..0000000000
--- a/package/system/utils/util-linux/patches/002-fix-endianess.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: util-linux-2.21.2/libblkid/src/superblocks/swap.c
-===================================================================
---- util-linux-2.21.2.orig/libblkid/src/superblocks/swap.c	2012-05-15 13:51:45.814410455 +0200
-+++ util-linux-2.21.2/libblkid/src/superblocks/swap.c	2013-06-12 23:23:03.270742199 +0200
-@@ -48,7 +48,7 @@
- 
- 	/* SWAPSPACE2 - check for wrong version or zeroed pagecount */
- 	if (strcmp(version, "2") == 0 &&
--	    (hdr->version != 1 || hdr->lastpage == 0))
-+	    ((hdr->version != 1 && swab32(hdr->version) != 1) || hdr->lastpage == 0))
- 		return -1;
- 
- 	/* arbitrary sanity check.. is there any garbage down there? */
diff --git a/package/system/utils/xfsprogs/Makefile b/package/system/utils/xfsprogs/Makefile
deleted file mode 100644
index a7a865a0eb..0000000000
--- a/package/system/utils/xfsprogs/Makefile
+++ /dev/null
@@ -1,87 +0,0 @@
-# 
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=xfsprogs
-PKG_RELEASE:=1
-PKG_VERSION:=3.1.7
-PKG_SOURCE_URL:=ftp://oss.sgi.com/projects/xfs/previous/
-PKG_MD5SUM:=049cf9873794ea49d0bb3f12d45748a4
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_INSTALL:=1
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-define Package/xfsprogs/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libuuid +libpthread +librt
-  URL:=http://oss.sgi.com/projects/xfs
-endef
-
-define Package/xfs-mkfs
-$(call Package/xfsprogs/default)
-  TITLE:=Utility for creating XFS filesystems
-endef
-
-define Package/xfs-fsck
-$(call Package/xfsprogs/default)
-  TITLE:=Utilities for checking and repairing XFS filesystems
-endef
-
-define Package/xfs-growfs
-$(call Package/xfsprogs/default)
-  TITLE:=Utility for increasing the size of XFS filesystems
-endef
-
-CONFIGURE_ARGS += \
-	--enable-gettext=no \
-	--enable-lib64=no
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_LARGEFILE64_SOURCE \
-	-D_FILE_OFFSET_BITS=64 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	DEBUG= Q= \
-	PCFLAGS="-Wall" \
-	PKG_PLATFORM=linux \
-	ENABLE_GETTEXT=no \
-	prefix=$(PKG_INSTALL_DIR)/usr \
-	exec_prefix=$(PKG_INSTALL_DIR)/usr \
-	PKG_SBIN_DIR=$(PKG_INSTALL_DIR)/usr/sbin \
-	PKG_ROOT_SBIN_DIR=$(PKG_INSTALL_DIR)/sbin \
-	PKG_MAN_DIR=$(PKG_INSTALL_DIR)/usr/man \
-	PKG_LOCALE_DIR=$(PKG_INSTALL_DIR)/usr/share/locale \
-	PKG_ROOT_LIB_DIR=$(PKG_INSTALL_DIR)/lib \
-	PKG_DOC_DIR=$(PKG_INSTALL_DIR)/usr/share/doc/xfsprogs
-
-define Package/xfs-mkfs/install
-	mkdir -p $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/mkfs.xfs $(1)/sbin
-endef
-
-define Package/xfs-fsck/install
-	mkdir -p $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/xfs_repair $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/xfs_db $(1)/sbin
-endef
-
-define Package/xfs-growfs/install
-	mkdir -p $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/xfs_growfs $(1)/sbin
-endef
-
-$(eval $(call BuildPackage,xfs-mkfs))
-$(eval $(call BuildPackage,xfs-fsck))
-$(eval $(call BuildPackage,xfs-growfs))
diff --git a/package/system/utils/xfsprogs/patches/001-automake-compat.patch b/package/system/utils/xfsprogs/patches/001-automake-compat.patch
deleted file mode 100644
index 3003d6d210..0000000000
--- a/package/system/utils/xfsprogs/patches/001-automake-compat.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-commit 2222aa77e11b959e0e5a0ded3482e56799593bc2
-Author: Jens Muecke <jens@nons.de>
-Date:   Thu Jan 26 00:34:15 2012 +0100
-
-    001-automake-compat
-
-diff --git a/configure.in b/configure.in
-index 664c0e9..d91b6ec 100644
---- a/configure.in
-+++ b/configure.in
-@@ -2,7 +2,8 @@ AC_INIT(include/libxfs.h)
- AC_PREREQ(2.50)
- AC_CONFIG_AUX_DIR([.])
- AC_CONFIG_MACRO_DIR([m4])
--AC_CONFIG_HEADER(include/platform_defs.h)
-+# Put a dummy here (http://www.mail-archive.com/automake@gnu.org/msg09241.html)
-+AC_CONFIG_HEADERS([doesnotexist.h include/platform_defs.h])
- AC_PREFIX_DEFAULT(/usr)
- 
- AC_PROG_LIBTOOL
-diff --git a/include/builddefs.in b/include/builddefs.in
-index 81ebfcd..5a4a0e8 100644
---- a/include/builddefs.in
-+++ b/include/builddefs.in
-@@ -20,6 +20,8 @@
- ifndef _BUILDDEFS_INCLUDED_
- _BUILDDEFS_INCLUDED_ = 1
- 
-+SHELL = @SHELL@
-+
- DEBUG = @debug_build@
- OPTIMIZER = @opt_build@
- MALLOCLIB = @malloc_lib@
-diff --git a/m4/package_types.m4 b/m4/package_types.m4
-index 0a0e087..66a136a 100644
---- a/m4/package_types.m4
-+++ b/m4/package_types.m4
-@@ -9,7 +9,7 @@ AC_DEFUN([AC_TYPE_PSINT],
- #include <stddef.h>
-     ], [
-          __psint_t  psint;
--    ], AC_DEFINE(HAVE___PSINT_T) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-+    ], AC_DEFINE([HAVE___PSINT_T], [1], [Define if __psint_t exists]) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-   ])
- 
- # 
-@@ -23,7 +23,7 @@ AC_DEFUN([AC_TYPE_PSUNSIGNED],
- #include <stddef.h>
-     ], [
-         __psunsigned_t  psuint;
--    ], AC_DEFINE(HAVE___PSUNSIGNED_T) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-+    ], AC_DEFINE([HAVE___PSUNSIGNED_T], [1], [Define if __psunsigned_t exists]) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-   ])
- 
- # 
-@@ -37,7 +37,7 @@ AC_DEFUN([AC_TYPE_U32],
- #include <stddef.h>
-     ], [
-          __u32  u32;
--    ], AC_DEFINE(HAVE___U32) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-+    ], AC_DEFINE([HAVE___U32], [1], [Define if __u32 exists]) AC_MSG_RESULT(yes) , AC_MSG_RESULT(no))
-   ])
- 
- # 
-@@ -50,15 +50,15 @@ AC_DEFUN([AC_SIZEOF_POINTERS_AND_LONG],
-     AC_CHECK_SIZEOF(long, 4)
-     AC_CHECK_SIZEOF(char *, 4)
-     if test $ac_cv_sizeof_long -eq 4 -o $ac_cv_sizeof_long -eq 0; then
--      AC_DEFINE(HAVE_32BIT_LONG)
-+      AC_DEFINE([HAVE_32BIT_LONG], [1], [Define if long is 32bit])
-     fi
-     if test $ac_cv_sizeof_long -eq 8; then
--      AC_DEFINE(HAVE_64BIT_LONG)
-+      AC_DEFINE([HAVE_64BIT_LONG], [1], [Define if long is 64bit])
-     fi
-     if test $ac_cv_sizeof_char_p -eq 4 -o $ac_cv_sizeof_char_p -eq 0; then
--      AC_DEFINE(HAVE_32BIT_PTR)
-+      AC_DEFINE([HAVE_32BIT_PTR], [1], [Define if char* is 32bit])
-     fi
-     if test $ac_cv_sizeof_char_p -eq 8; then
--      AC_DEFINE(HAVE_64BIT_PTR)
-+      AC_DEFINE([HAVE_64BIT_PTR], [1], [Define if char* is 64bit])
-     fi
-   ])
diff --git a/package/system/utils/xfsprogs/patches/100-no_aio.patch b/package/system/utils/xfsprogs/patches/100-no_aio.patch
deleted file mode 100644
index 30d36b4da8..0000000000
--- a/package/system/utils/xfsprogs/patches/100-no_aio.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-commit e72b7bd12fdef06c3494b919376bfe886aa8bb4d
-Author: Jens Muecke <jens@nons.de>
-Date:   Thu Jan 26 00:35:43 2012 +0100
-
-    100-no_aio
-
-diff --git a/configure.in b/configure.in
-index d91b6ec..8dc8b4a 100644
---- a/configure.in
-+++ b/configure.in
-@@ -92,8 +92,8 @@ AC_PACKAGE_GLOBALS(xfsprogs)
- AC_PACKAGE_UTILITIES(xfsprogs)
- AC_MULTILIB($enable_lib64)
- 
--AC_PACKAGE_NEED_AIO_H
--AC_PACKAGE_NEED_LIO_LISTIO
-+librt="-lrt"
-+AC_SUBST(librt)
- 
- AC_PACKAGE_NEED_UUID_H
- AC_PACKAGE_NEED_UUIDCOMPARE
diff --git a/package/system/utils/xfsprogs/patches/110-uclibc_no_ustat.patch b/package/system/utils/xfsprogs/patches/110-uclibc_no_ustat.patch
deleted file mode 100644
index c46e8025cd..0000000000
--- a/package/system/utils/xfsprogs/patches/110-uclibc_no_ustat.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-commit 7b1d0a98e779170232c0a81b4749ab934ec67a7e
-Author: Jens Muecke <jens@nons.de>
-Date:   Thu Jan 26 00:36:42 2012 +0100
-
-    110-uclibc_no_ustat
-
-diff --git a/libxfs/linux.c b/libxfs/linux.c
-index 2e07d54..6a6c905 100644
---- a/libxfs/linux.c
-+++ b/libxfs/linux.c
-@@ -21,7 +21,9 @@
- #include <mntent.h>
- #include <sys/stat.h>
- #undef ustat
-+#ifndef __UCLIBC__
- #include <sys/ustat.h>
-+#endif
- #include <sys/mount.h>
- #include <sys/ioctl.h>
- #include <sys/sysinfo.h>
-@@ -49,6 +51,7 @@ static int max_block_alignment;
- int
- platform_check_ismounted(char *name, char *block, struct stat64 *s, int verbose)
- {
-+#ifndef __UCLIBC__
- 	/* Pad ust; pre-2.6.28 linux copies out too much in 32bit compat mode */
- 	struct ustat	ust[2];
- 	struct stat64	st;
-@@ -68,6 +71,7 @@ platform_check_ismounted(char *name, char *block, struct stat64 *s, int verbose)
- 				progname, name);
- 		return 1;
- 	}
-+#endif
- 	return 0;
- }
- 
diff --git a/package/system/utils/xfsprogs/patches/120-portability.patch b/package/system/utils/xfsprogs/patches/120-portability.patch
deleted file mode 100644
index 1e9b533654..0000000000
--- a/package/system/utils/xfsprogs/patches/120-portability.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-commit d2aef8b3967e53fe58178f5af50fef488ee0faed
-Author: Jens Muecke <jens@nons.de>
-Date:   Thu Jan 26 00:37:52 2012 +0100
-
-    120-portability
-
-diff --git a/copy/xfs_copy.c b/copy/xfs_copy.c
-index c01e0b9..2e2f320 100644
---- a/copy/xfs_copy.c
-+++ b/copy/xfs_copy.c
-@@ -463,6 +463,15 @@ read_ag_header(int fd, xfs_agnumber_t agno, wbuf *buf, ag_header_t *ag,
- }
- 
- 
-+static void sig_mask(int type)
-+{
-+	sigset_t mask;
-+	sigemptyset(&mask);
-+	sigaddset(&mask, SIGCHLD);
-+	sigprocmask(type, &mask, NULL);
-+}
-+
-+
- void
- write_wbuf(void)
- {
-@@ -478,9 +487,9 @@ write_wbuf(void)
- 		if (target[i].state != INACTIVE)
- 			pthread_mutex_unlock(&targ[i].wait);	/* wake up */
- 
--	sigrelse(SIGCHLD);
-+	sig_mask(SIG_UNBLOCK);
- 	pthread_mutex_lock(&mainwait);
--	sighold(SIGCHLD);
-+	sig_mask(SIG_BLOCK);
- }
- 
- 
-@@ -847,7 +856,7 @@ main(int argc, char **argv)
- 	/* set up sigchild signal handler */
- 
- 	signal(SIGCHLD, handler);
--	sighold(SIGCHLD);
-+	sig_mask(SIG_BLOCK);
- 
- 	/* make children */
- 
diff --git a/package/system/utils/xfsprogs/patches/130-uclibc_no_xattr.patch b/package/system/utils/xfsprogs/patches/130-uclibc_no_xattr.patch
deleted file mode 100644
index b1ecda71e5..0000000000
--- a/package/system/utils/xfsprogs/patches/130-uclibc_no_xattr.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-commit 10d6058b24f18cb31889154f830b191849f45106
-Author: Jens Muecke <jens@nons.de>
-Date:   Thu Jan 26 00:38:27 2012 +0100
-
-    130-uclibc_no_xattr
-
-diff --git a/fsr/xfs_fsr.c b/fsr/xfs_fsr.c
-index 40c2e6f..4f54059 100644
---- a/fsr/xfs_fsr.c
-+++ b/fsr/xfs_fsr.c
-@@ -35,7 +35,9 @@
- #include <sys/wait.h>
- #include <sys/vfs.h>
- #include <sys/statvfs.h>
-+#ifndef __UCLIBC__
- #include <sys/xattr.h>
-+#endif
- 
- 
- #ifndef XFS_XFLAG_NODEFRAG
-@@ -990,6 +992,7 @@ fsr_setup_attr_fork(
- 	int		tfd,
- 	xfs_bstat_t	*bstatp)
- {
-+#ifndef __UCLIBC__
- 	struct stat64	tstatbuf;
- 	int		i;
- 	int		last_forkoff = 0;
-@@ -1108,6 +1111,7 @@ fsr_setup_attr_fork(
- out:
- 	if (dflag)
- 		fsrprintf(_("set temp attr\n"));
-+#endif
- 	return 0;
- }
- 
diff --git a/package/system/utils/xfsprogs/patches/140-no_po.patch b/package/system/utils/xfsprogs/patches/140-no_po.patch
deleted file mode 100644
index f915a9cf27..0000000000
--- a/package/system/utils/xfsprogs/patches/140-no_po.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-diff -urN xfsprogs-3.1.7/Makefile xfsprogs-3.1.7.new/Makefile
---- xfsprogs-3.1.7/Makefile	2011-11-18 00:30:24.000000000 +0100
-+++ xfsprogs-3.1.7.new/Makefile	2012-04-20 14:15:48.641722955 +0200
-@@ -41,7 +41,7 @@
- 
- LIB_SUBDIRS = libxfs libxlog libxcmd libhandle libdisk
- TOOL_SUBDIRS = copy db estimate fsck fsr growfs io logprint mkfs quota \
--		mdrestore repair rtcp m4 man doc po debian
-+		mdrestore repair rtcp m4 man doc debian
- 
- SUBDIRS = include $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
- 
-@@ -135,7 +135,6 @@
- 	$(Q)$(MAKE) $(MAKEOPTS) -C . $@
- else
- 	$(Q)$(MAKE) $(MAKEOPTS) $(SRCDIR)
--	$(Q)$(MAKE) $(MAKEOPTS) -C po
- 	$(Q)$(MAKE) $(MAKEOPTS) source-link
- 	$(Q)cd $(SRCDIR) && dpkg-buildpackage
- endif