aboutsummaryrefslogtreecommitdiffstats
path: root/package/system/procd/Makefile
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-04-14 03:58:37 +0200
committerDavid Bauer <mail@david-bauer.net>2020-04-19 16:45:40 +0200
commit8d9c1087e4d07d625a9fef61d5dce71d850732ae (patch)
tree78f125291c0085a570dd288decce08bd2927a7f7 /package/system/procd/Makefile
parent45e2b7763f2a846bf1a40f5fa79b4cfe4678557a (diff)
downloadupstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.gz
upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.bz2
upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.zip
ath79: add support for AVM FRITZ!WLAN Repeater 450E
SOC: Qualcomm QCA9556 (Scorpion) 560MHz MIPS74Kc RAM: 64MB Zentel A3R12E40CBF DDR2 FLASH: 16MiB Winbond W25Q128 SPI NOR WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3 INPUT: WPS button LED: Power, WiFi, LAN, RSSI indicator Serial: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 192.168.178.1. Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. You need to powercycle the device afterwards to boot OpenWRT. Tested-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/system/procd/Makefile')
0 files changed, 0 insertions, 0 deletions