Migrate rt2x00 to the compat-wireless version

SVN-Revision: 10753

1 files changed, 0 insertions, 180 deletions

diff --git a/package/rt2x00/src/rt2x00usb.h b/package/rt2x00/src/rt2x00usb.h
deleted file mode 100644
index 2681abe4d4..0000000000
--- a/package/rt2x00/src/rt2x00usb.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
-	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
-	<http://rt2x00.serialmonkey.com>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the
-	Free Software Foundation, Inc.,
-	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
-	Module: rt2x00usb
-	Abstract: Data structures for the rt2x00usb module.
- */
-
-#ifndef RT2X00USB_H
-#define RT2X00USB_H
-
-/*
- * This variable should be used with the
- * usb_driver structure initialization.
- */
-#define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
-
-/*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
- * For USB vendor requests we need to pass a timeout
- * time in ms, for this we use the REGISTER_TIMEOUT,
- * however when loading firmware a higher value is
- * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
- */
-#define REGISTER_BUSY_COUNT		5
-#define REGISTER_BUSY_DELAY		100
-#define REGISTER_TIMEOUT		500
-#define REGISTER_TIMEOUT_FIRMWARE	1000
-
-/*
- * Cache size
- */
-#define CSR_CACHE_SIZE			8
-#define CSR_CACHE_SIZE_FIRMWARE		64
-
-/*
- * USB request types.
- */
-#define USB_VENDOR_REQUEST	( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
-#define USB_VENDOR_REQUEST_IN	( USB_DIR_IN | USB_VENDOR_REQUEST )
-#define USB_VENDOR_REQUEST_OUT	( USB_DIR_OUT | USB_VENDOR_REQUEST )
-
-/*
- * USB vendor commands.
- */
-#define USB_DEVICE_MODE		0x01
-#define USB_SINGLE_WRITE	0x02
-#define USB_SINGLE_READ		0x03
-#define USB_MULTI_WRITE		0x06
-#define USB_MULTI_READ		0x07
-#define USB_EEPROM_WRITE	0x08
-#define USB_EEPROM_READ		0x09
-#define USB_LED_CONTROL		0x0a	/* RT73USB */
-#define USB_RX_CONTROL		0x0c
-
-/*
- * Device modes offset
- */
-#define USB_MODE_RESET		0x01
-#define USB_MODE_UNPLUG		0x02
-#define USB_MODE_FUNCTION	0x03
-#define USB_MODE_TEST		0x04
-#define USB_MODE_SLEEP		0x07	/* RT73USB */
-#define USB_MODE_FIRMWARE	0x08	/* RT73USB */
-#define USB_MODE_WAKEUP		0x09	/* RT73USB */
-
-/*
- * Used to read/write from/to the device.
- * This is the main function to communicate with the device,
- * the buffer argument _must_ either be NULL or point to
- * a buffer allocated by kmalloc. Failure to do so can lead
- * to unexpected behavior depending on the architecture.
- */
-int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
-			     const u8 request, const u8 requesttype,
-			     const u16 offset, const u16 value,
-			     void *buffer, const u16 buffer_length,
-			     const int timeout);
-
-/*
- * Used to read/write from/to the device.
- * This function will use a previously with kmalloc allocated cache
- * to communicate with the device. The contents of the buffer pointer
- * will be copied to this cache when writing, or read from the cache
- * when reading.
- * Buffers send to rt2x00usb_vendor_request _must_ be allocated with
- * kmalloc. Hence the reason for using a previously allocated cache
- * which has been allocated properly.
- */
-int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
-				  const u8 request, const u8 requesttype,
-				  const u16 offset, void *buffer,
-				  const u16 buffer_length, const int timeout);
-
-/*
- * Simple wrapper around rt2x00usb_vendor_request to write a single
- * command to the device. Since we don't use the buffer argument we
- * don't have to worry about kmalloc here.
- */
-static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
-					      *rt2x00dev,
-					      const u8 request,
-					      const u16 offset,
-					      const u16 value,
-					      const int timeout)
-{
-	return rt2x00usb_vendor_request(rt2x00dev, request,
-					USB_VENDOR_REQUEST_OUT, offset,
-					value, NULL, 0, timeout);
-}
-
-/*
- * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
- * from the device. Note that the eeprom argument _must_ be allocated using
- * kmalloc for correct handling inside the kernel USB layer.
- */
-static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
-					 __le16 *eeprom, const u16 lenght)
-{
-	int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
-
-	return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
-					USB_VENDOR_REQUEST_IN, 0x0000,
-					0x0000, eeprom, lenght, timeout);
-}
-
-/*
- * Radio handlers
- */
-void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev);
-void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
-
-/*
- * TX data handlers.
- */
-int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
-			    struct data_ring *ring, struct sk_buff *skb,
-			    struct ieee80211_tx_control *control);
-
-/*
- * Device initialization handlers.
- */
-int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
-void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
-
-/*
- * USB driver handlers.
- */
-int rt2x00usb_probe(struct usb_interface *usb_intf,
-		    const struct usb_device_id *id);
-void rt2x00usb_disconnect(struct usb_interface *usb_intf);
-#ifdef CONFIG_PM
-int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
-int rt2x00usb_resume(struct usb_interface *usb_intf);
-#else
-#define rt2x00usb_suspend	NULL
-#define rt2x00usb_resume	NULL
-#endif /* CONFIG_PM */
-
-#endif /* RT2X00USB_H */